Sennheiser Microphone E912S User Manual

e912S  
Boundary layer microphone  
FEATURES  
The e 912 S is a high-quality, pre-po-  
larised condenser microphone with half-  
cardioid pick-up pattern, acoustically opti-  
mized for picking up speech. Due to  
its unobtrusive, flat design, it is ideally suited  
for use on conference tables, altars and  
lecterns. The e 912 S can be switched  
on and off via an integrated membrane  
switch.  
Very unobtrusive due to flat design  
Optimized for picking up speech at  
relatively short distances  
Programmable membrane switch  
Mounting slots for mounting the  
microphone to table tops, lecterns, etc.  
Extremely rugged sound inlet basket  
Gold-plated XLR connector  
ARCHITECTS  
SPECIFICATIONS  
TECHNICAL DATA  
Transducer principle..................................................pre-polarised condenser microphone  
Directivity..............................................................half-cardioid  
Frequency response ............................................20 Hz - 20 kHz  
Sensitivity (at 1kHz)...........................................6 mV/Pa  
Impedance.............................................................< 100 Ohms  
Max. sound pressure level .................................134 dB SPL  
Equivalent noise level.........................................26 dB(A)  
Equivalent noise level as per CCIR 468-3........37 dB  
Phantom powering..............................................P48  
Current consumption..........................................2,8 mA  
Connection ............................................................XLR 3  
Weigt......................................................................550g / 17,7oz.  
Dimensions (W x H x D)......................................105 x 26,5 x 126,5 mm  
4,13“ x 1,04“ x 4,98“  
The microphone shall be a pre-polarized  
condenser designed boundary layer micro-  
phone. It shall feature a half-cardioid polar  
pattern. It shall have a frequency response  
of 20 Hz to 20,000 Hz and be capable of  
handling sound input levels up to 134  
dBspl. Nominal equivalent noise level  
shall be 26 dBA (37 dB weighted as per  
CCIR 468-3). Output shall be low impe-  
dance balanced (<100 ohms). Operating  
temperature shall be 32° to 104° F (0°  
to 40° C). The microphone shall operate  
from an external 12V to 48V DC phantom  
power source; current consumption shall  
be 2,8 mA. The microphone shall include a  
programmable membrane switch, offering  
different modes of microphone activation  
including push-to-talk, push-to-mute,  
on-off and permanent on. A LED on the  
front shall indicate the activity of the  
microphone. The microphone shall be a  
boundary layer design with a width of  
4.13“ (105 mm), height of 1,04“ (26,5  
mm) and depth of 4,98“ (126,5 mm). The  
microphone weight shall be 17,7 oz (550  
grams). Finish shall be matte black. The  
microphone shall be Sennheiser e912S.  
Delivery includes..................................................1 e912S  
Pouch  
Manual  
 

Sharp CRT Television 32C230 User Manual
Singer Sewing Machine 1019 User Manual
Sonos Stereo System ZP100 User Manual
Sony Computer Monitor SDM M61 User Manual
Sony Home Theater System D E356CK User Manual
Sony MiniDisc Player mds e11 User Manual
Sony Speaker SA W303 User Manual
Sony VCR SLV 775HF User Manual
Sony Watch SWR50 User Manual
Sungale Tablet ID982WTA User Manual