Shakespeare Electronic Marine Instruments 4187 User Manual

Styles 4187 & 4187-HD  
Thank you for purchasing a Shakespeare antenna product.  
Customer comments are welcome. Before installing, please study  
the diagram and check parts supplied against those listed.  
Supplied Parts  
1 Stainless steel mount  
IMPORTANT! Please read all instructions before installing.  
The Style 4187 Stainless Steel Ratchet Mount is a versatile,  
free-standing mount with a four-way ratchet design. It can be used  
for mounting to vertical or horizontal surfaces - deck or bulkhead -  
and adjust to a slanted surface.  
Style 4187 or 4187-HD Mount  
Cable hole  
The Style 4187-HD is an extra heavy duty stainless steel ratchet  
mount for use on high speed boats and with the Galaxy® Style 5399  
VHF antenna.  
Mounting  
surface  
Tools required: As needed to secure mount  
to surface, drill and drill bit for ¼” screws;  
screwdriver; wrench or pliers  
Base rotated  
for bulkhead  
mounting  
Installation Instructions  
Choose a mounting location that is as high as possible, as free  
as possible from obstructions, and as far as practical from other  
antennas or strong sources of RF. Use ¼” bolts and washers (sold  
separately) to attach the mount securely to the surface you choose.  
For other types of surfaces, you may need other types of mounting  
hardware (not supplied). Be sure to use only stainless steel  
hardware.  
Cable hole  
1. Using the base of the Ratchet Mount as a template, mark the  
location for the mounting holes. Drill ¼” holes.  
2. Attach the Ratchet Mount to the mounting surface.  
Style 4187 or  
4187-HD Mount  
IMPORTANT: If the thickness of the mounting  
surface is not adequate to support the antenna under  
expected stress, a wooden back-up pad (not supplied)  
should be applied underneath the mounting surface  
during installation.  
Base rotated for  
deck mounting  
3. Assemble the antenna to the Ratchet Mount, being careful not to  
damage the antenna’s cabling, if any.  
Mounting  
surface  
For a streamlined look, the cable may be routed through the  
hole in the side of the mount. To preserve the mount’s lustre, apply  
automobile wax or metal polish.  
Wooden back-up pad and  
mounting bolts, lock-washers,  
and nuts (not supplied)  
Shakespeare Electronic Products Group  
Shakespeare is a subsidiary of Jarden Corporation (NYSE: JAH)  
©1998 Shakespeare Co.  
· Form I-4187 J: rev. 04/25/2010  
 

Sony Camcorder Accessories HD RCX300 User Manual
Sony Computer Monitor LMD 5320 User Manual
Sony DVD Player Model DAV SR4W User Manual
Sony Microphone ECM MS907 User Manual
Sony Projector KP 61HS10 User Manual
Sony Speaker System ICF SW1000TS User Manual
Stanton Stereo Amplifier smx 201 User Manual
Sunbeam Electric Steamer ST6810 User Manual
SVA Computer Monitor 15 User Manual
Symbol Technologies Scanner LS 3603 User Manual