Sony Blu ray Player BDPS1200 User Manual

4-476-203-91(1)  
Getting Started  
Blu-ray Disc™ /  
DVD Player  
Playback  
Internet  
Operating Instructions  
Settings and Adjustments  
Additional Information  
Thank you for your purchase. Before using this  
player, please read these instruction carefully.  
BDP-S1200/BDP-S3200/BDP-S5200  
 
• Do not place heavy or unstable objects on  
the player.  
• Do not place any objects other than discs on  
the disc tray. Doing so may cause damage to  
the player or the object.  
• Take out any discs from the tray when you  
move the player. If you don’t, the disc may  
be damaged.  
On adjusting volume  
Do not turn up the volume while listening to a  
section with very low level inputs or no audio  
signals. Your ears and the speakers may be  
damaged when the sound level reaches the  
peak.  
On cleaning  
Clean the cabinet, panel, and controls with a  
soft cloth. Do not use any type of abrasive pad,  
scouring powder or solvent such as alcohol or  
benzine.  
• Disconnect the AC power cord (mains lead)  
and all other cables from the player when  
you move the player.  
On power sources  
On cleaning discs, disc/lens cleaners  
Do not use cleaning discs or disc/lens cleaners  
(including wet or spray types). These may  
cause the apparatus to malfunction.  
• The player is not disconnected from the AC  
power source (mains) as long as it is  
connected to the wall outlet, even if the  
player itself has been turned off.  
• Disconnect the player from the wall outlet if  
you are not going to use the player for a long  
time. To disconnect the AC power cord  
(mains lead), grasp the plug itself; never pull  
the cord.  
On replacement of parts  
In the events that this player is repaired,  
repaired parts may be collected for reuse or  
recycling purposes.  
• Observe following points to prevent the AC  
power cord (mains lead) being damaged. Do  
not use the AC power cord (mains lead) if it  
is damaged, as doing so may result in an  
electric shock or fire.  
– Do not pinch the AC power cord (mains  
lead) between the player and wall, shelf,  
etc.  
On connecting to the HDMI OUT jack  
Observe the following as improper handling  
may damage the HDMI OUT jack and the  
connector.  
• Carefully align the HDMI OUT jack on the  
rear of the player and the HDMI connector  
by checking their shapes. Make sure the  
connector is not upside down or tilted.  
– Do not put anything heavy on the AC  
power cord (mains lead) or pull on the AC  
power cord (mains lead) itself.  
On AC adaptor  
• Use the supplied AC adaptor for this player,  
as other adaptors may cause a malfunction.  
• Do not disassemble or reverse-engineer.  
• Do not confine the AC adaptor in a closed  
place such as a bookshelf or an AV cabinet.  
• Do not connect the AC adaptor to a  
traveler’s electric transformer, which may  
generate heat and cause a malfunction.  
• Do not drop or apply shock.  
• Be sure to disconnect the HDMI cable when  
moving the player.  
• Hold the HDMI connector straight when  
connecting or disconnecting the HDMI  
cable. Do not twist or force the HDMI  
connector into the HDMI OUT jack.  
3
 
On watching 3D video images  
(BDP-S5200 only)  
Copy Protection  
Please be advised of the advanced content  
protection systems used in both Blu-ray  
Disc™ and DVD media. These systems,  
called AACS (Advanced Access Content  
System) and CSS (Content Scramble System),  
may contain some restrictions on playback,  
analogue output, and other similar features.  
The operation of this product and the  
restrictions placed may vary depending on the  
date of purchase, as the governing board of the  
AACS may adopt or change its restriction  
rules after the time of purchase.  
Some people may experience discomfort  
(such as eye strain, fatigue, or nausea) while  
watching 3D video images. Sony recommends  
that all viewers take regular breaks while  
watching 3D video images. The length and  
frequency of necessary breaks will vary from  
person to person. You must decide what works  
best. If you experience any discomfort, you  
should stop watching the 3D video images  
until the discomfort ends; consult a doctor if  
you believe necessary. You should also  
review (i) the instruction manual and/or the  
caution message of any other device used  
with, or Blu-ray Disc contents played with this  
product and (ii) our website  
Cinavia Notice  
This product uses Cinavia technology to limit  
the use of unauthorized copies of some  
commercially-produced film and videos and  
their soundtracks. When a prohibited use of an  
unauthorized copy is detected, a message will  
be displayed and playback or copying will be  
interrupted.  
latest information. The vision of young  
children (especially those under six years old)  
is still under development. Consult your  
doctor (such as a pediatrician or eye doctor)  
before allowing young children to watch 3D  
video images.  
Adults should supervise young children to  
ensure they follow the recommendations  
listed above.  
More information about Cinavia technology is  
provided at the Cinavia Online Consumer  
InformationCenterathttp://www.cinavia.com.  
To request additional information about  
Cinavia by mail, send a postcard with your  
mailing address to: Cinavia Consumer  
Information Center, P.O. Box 86851, San  
Diego, CA, 92138, USA.  
IMPORTANT NOTICE  
Caution: This player is capable of holding  
a still video image or on-screen display  
image on your television screen  
About this manual  
The cover page photo is BDP-S5200.  
indefinitely. If you leave the still video  
image or on-screen display image  
displayed on your TV for an extended  
period of time you risk permanent damage  
to your television screen. Plasma display  
panel televisions and projection  
Copyrights and Trademarks  
• “AVCHD” and the “AVCHD 3D/  
Progressive” logo are trademarks of  
Panasonic Corporation and Sony  
Corporation.  
televisions are susceptible to this.  
• Java is a trademark of Oracle and/or its  
affiliates.  
If you have any questions or problems  
concerning your player, please consult your  
nearest Sony dealer.  
, “XMB,” and “xross media bar” are  
trademarks of Sony Corporation and Sony  
Computer Entertainment Inc.  
• Manufactured under license from Dolby  
Laboratories. Dolby, Pro Logic, and the  
double-D symbol are trademarks of Dolby  
Laboratories.  
4
 
 
Manufactured under license from DTS  
Licensing Limited. DTS, the Symbol, &  
DTS and the Symbol together are registered  
trademarks, and DTS 2.0+Digital Out is a  
trademark of DTS, Inc. © DTS, Inc. All  
Rights Reserved.  
Content owners use Microsoft PlayReady™  
content access technology to protect their  
intellectual property, including copyrighted  
content. This device uses PlayReady  
technology to access PlayReady-protected  
contentand/or WMDRM-protected content.  
If the device fails to properly enforce  
restrictions on content usage, content  
owners may require Microsoft to revoke the  
device’s ability to consume PlayReady-  
protected content. Revocation should not  
affect unprotected content or content  
protected by other content access  
®
• The terms HDMI and HDMI High-  
Definition Multimedia Interface, and the  
HDMI Logo are trademarks or registered  
trademarks of HDMI Licensing LLC in the  
United States and other countries.  
• Blu-ray Disc™, Blu-ray™, Blu-ray 3D™,  
BD-Live™, BONUSVIEW™, and the  
logos are trademarks of the Blu-ray Disc  
Association.  
• “DVD Logo” is a trademark of  
DVD Format/Logo Licensing Corporation.  
• “DVD+RW,” “DVD-RW,” “DVD+R,”  
“DVD-R,” “DVD VIDEO,” and “CD” logos  
are trademarks.  
technologies. Content owners may require  
you to upgrade PlayReady to access their  
content. If you decline an upgrade, you will  
not be able to access content that requires  
the upgrade.  
• Music and video recognition technology and  
®
related data are provided by Gracenote .  
Gracenote is the industry standard in music  
recognition technology and related content  
delivery. For more information, please visit  
• “BRAVIA” is a trademark of Sony  
Corporation.  
• MPEG Layer-3 audio coding technology  
and patents licensed from Fraunhofer IIS  
and Thomson.  
CD, DVD, Blu-ray Disc, and music and  
video-related data from Gracenote, Inc.,  
copyright © 2000-present Gracenote.  
Gracenote Software, copyright © 2000-  
present Gracenote. One or more patents  
owned by Gracenote apply to this product  
and service. See the Gracenote website for a  
nonexhaustive list of applicable Gracenote  
patents. Gracenote, CDDB, MusicID,  
MediaVOCS, the Gracenote logo and  
logotype, and the “Powered by Gracenote”  
logo are either registered trademarks or  
trademarks of Gracenote in the United  
States and/or other countries.  
• This product incorporates proprietary  
technology under license from Verance  
Corporation and is protected by U.S. Patent  
7,369,677 and other U.S. and worldwide  
patents issued and pending as well as  
copyright and trade secret protection for  
certain aspects of such technology. Cinavia  
is a trademark of Verance Corporation.  
Copyright 2004-2010 Verance Corporation.  
All rights reserved by Verance. Reverse  
engineering or disassembly is prohibited.  
• Windows Media is either a registered  
trademark or trademark of Microsoft  
Corporation in the United States and/or  
other countries.  
This product contains technology subject to  
certain intellectual property rights of  
Microsoft. Use or distribution of this  
technology outside of this product is  
prohibited without the appropriate license(s)  
from Microsoft.  
5
 
®
Gracenote End User License  
Agreement  
This application or device contains software  
from Gracenote, Inc. of Emeryville, California  
(“Gracenote”). The software from Gracenote  
(the “Gracenote Software”) enables this  
application to perform disc and/or file  
identification and obtain music-related  
information, including name, artist, track, and  
title information (“Gracenote Data”) from  
online servers or embedded databases  
(collectively, “Gracenote Servers”) and to  
perform other functions. You may use  
Gracenote Data only by means of the intended  
End-User functions of this application or  
device.  
®
®
• Wi-Fi , Wi-Fi Protected Access and  
®
Wi-Fi Alliance are registered trademarks  
of Wi-Fi Alliance.  
• Wi-Fi CERTIFIED™, WPA™, WPA2™,  
Wi-Fi Protected Setup™, Miracast™ and  
Wi-Fi CERTIFIED Miracast™ are  
trademarks of Wi-Fi Alliance.  
• The Wi-Fi CERTIFIED Logo is a  
certification mark of Wi-Fi Alliance.  
• The Wi-Fi Protected Setup Identifier Mark  
is a mark of Wi-Fi Alliance.  
®
• DLNA , the DLNA Logo and DLNA  
CERTIFIED™ are trademarks, service  
marks, or certification marks of the Digital  
Living Network Alliance.  
• Opera Devices SDK from Opera Software  
ASA. Copyright 1995-2013 Opera Software  
ASA. All rights reserved.  
You agree that you will use Gracenote Data,  
the Gracenote Software, and Gracenote  
Servers for your own personal non-  
commercial use only. You agree not to assign,  
copy, transfer or transmit the Gracenote  
Software or any Gracenote Data to any third  
party. YOU AGREE NOT TO USE OR  
EXPLOIT GRACENOTE DATA, THE  
GRACENOTE SOFTWARE, OR  
®
GRACENOTE SERVERS, EXCEPT AS  
EXPRESSLY PERMITTED HEREIN.  
• All other trademarks are trademarks of their  
respective owners.  
You agree that your non-exclusive license to  
use the Gracenote Data, the Gracenote  
Software, and Gracenote Servers will  
terminate if you violate these restrictions. If  
your license terminates, you agree to cease  
any and all use of the Gracenote Data, the  
Gracenote Software, and Gracenote Servers.  
Gracenote reserves all rights in Gracenote  
Data, the Gracenote Software, and the  
Gracenote Servers, including all ownership  
rights. Under no circumstances will Gracenote  
become liable for any payment to you for any  
information that you provide. You agree that  
Gracenote, Inc. may enforce its rights under  
this Agreement against you directly in its own  
name.  
• Other system and product names are  
generally trademarks or registered  
trademarks of the manufacturers. ™ and ®  
marks are not indicated in this document.  
,continued to page 8  
6
 
Contents  
2
2
WARNING  
Precautions  
Getting Started  
9
Guide to Parts and Controls  
13 Step 1: Connecting the Player  
15 Step 2: Preparing for Network Connection  
15 Step 3: Easy Setup  
Playback  
17 Playing a Disc  
19 Playing from a USB Device  
19 Playing via a Network  
22 Available Options  
I
Internet (BDP-S3200/S5200 only)  
24 Browsing Websites  
Settings and Adjustments  
26 Using the Settings Displays  
26 [Software Update]  
26 [Screen Settings]  
27 [Audio Settings]  
28 [BD/DVD Viewing Settings]  
29 [Parental Control Settings]  
29 [System Settings]  
30 [Network Settings]  
31 [Easy Network Settings]  
31 [Resetting]  
Additional Information  
32 Troubleshooting  
36 Specifications  
7
 
The Gracenote service uses a unique identifier  
to track queries for statistical purposes. The  
purpose of a randomly assigned numeric  
identifier is to allow the Gracenote service to  
count queries without knowing anything about  
who you are. For more information, see the  
web page for the Gracenote Privacy Policy for  
the Gracenote service.  
The Gracenote Software and each item of  
Gracenote Data are licensed to you “AS IS.”  
Gracenote makes no representations or  
warranties, express or implied, regarding the  
accuracy of any Gracenote Data from in the  
Gracenote Servers. Gracenote reserves the  
right to delete data from the Gracenote Servers  
or to change data categories for any cause that  
Gracenote deems sufficient. No warranty is  
made that the Gracenote Software or  
Gracenote Servers are error-free or that  
functioning of Gracenote Software or  
Gracenote Servers will be uninterrupted.  
Gracenote is not obligated to provide you with  
new enhanced or additional data types or  
categories that Gracenote may provide in the  
future and is free to discontinue its services at  
any time.  
GRACENOTE DISCLAIMS ALL  
WARRANTIES EXPRESS OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO,  
IMPLIED WARRANTIES OF  
MERCHANTABILITY, FITNESS FOR A  
PARTICULAR PURPOSE, TITLE, AND  
NON-INFRINGEMENT. GRACENOTE  
DOES NOT WARRANT THE RESULTS  
THAT WILL BE OBTAINED BY YOUR  
USE OF THE GRACENOTE SOFTWARE  
OR ANY GRACENOTE SERVER. IN NO  
CASE WILL GRACENOTE BE LIABLE  
FOR ANY CONSEQUENTIAL OR  
INCIDENTAL DAMAGES OR FOR ANY  
LOST PROFITS OR LOST REVENUES.  
© 2000 to present. Gracenote, Inc.  
8
 
 
Getting Started  
Guide to Parts and Controls  
Front panel  
1
2
34  
6
5
A Disc tray  
To lock the disc tray (Child Lock)  
You can lock the disc tray to avoid  
accidental opening of the tray.  
While the player is turned on, press  
x (stop), HOME, and then TOP MENU  
button on the remote to lock or unlock  
the tray.  
B Z (open/close)  
C [/1 (on/standby)  
Turns on the player, or sets to  
standby mode.  
D
(USB) jack  
Connect a USB device to this jack.  
E Power indicator  
Lights up when the player is  
turned on.  
F Remote sensor  
9
 
     
Rear panel  
A DC IN 12 V (AC adaptor input) jack  
B LAN (100) terminal  
C HDMI OUT jack  
D DIGITAL OUT (COAXIAL) jack  
10  
 
A Z (open/close)  
Remote  
Opens or closes the disc tray.  
-TV- t (TV input select)  
Switches between TV and other  
input sources.  
The available functions of the remote are  
different depending on the disc or the  
situation.  
-TV- [/1 (TV on/standby)  
Turns on the TV, or sets to standby  
mode.  
[/1 (on/standby)  
Turns on the player, or sets to  
standby mode.  
TOPMENU  
POP UP/  
MENU  
B Colour buttons (red/green/  
yellow/blue)  
Shortcut keys for interactive  
functions.  
C TOP MENU  
Opens or closes the BD’s or DVD’s  
Top Menu.  
RETURN  
OPTIONS  
POP UP/MENU  
Opens or closes the BD-ROM’s  
Pop-up Menu, or the DVD’s menu.  
HOME  
SEN  
OPTIONS (page 22)  
Displays the available options on the  
screen.  
RETURN  
Returns to the previous display.  
SUBTITLE  
AUDIO  
</M/m/,  
Moves the highlight to select a  
displayed item.  
DISPLAY  
b
M/m as a shortcut key for track search  
during music CD playback.  
Centre button (ENTER)  
Enters the selected item.  
z
HOME  
N, 2 +, and AUDIO buttons have a tactile  
dot. Use the tactile dot as a reference when  
operating the player.  
Enters the player’s home menu.  
Displays the wall paper when  
pressed on the category icon of the  
home menu.  
11  
 
SEN (page 19)  
AUDIO (page 28)  
Accesses the “Sony Entertainment  
Network™” online service.  
Selects the language track when  
multi-lingual tracks are recorded on  
BD-ROMs/DVD VIDEOs.  
Selects the sound track on CDs.  
NET SERVICE  
Returns to the previous online  
service portal.  
(muting)  
Turns off the sound temporarily.  
D m/M (fast reverse/fast  
forward)  
DISPLAY (page 18)  
Displays the playback and web  
browsing (BDP-S3200/S5200 only)  
information on the screen.  
• Fast reverse/fast forward the disc  
when you press the button during  
playback. The search speed  
changes each time you press the  
button during video playback.  
• Plays in slow motion, when  
pressed for more than one second  
in pause mode.  
Home menu display  
The home menu appears when you press  
HOME. Select a category using </,.  
Select an item using M/m, and press  
ENTER.  
• Plays one frame at a time, when  
you press for a short time in pause  
mode.  
N (play)  
Starts or re-starts playback.  
Category  
Item  
./> (previous/next)  
Skips to the previous/next chapter,  
track, or file.  
X (pause)  
Pauses or re-starts playback.  
x (stop)  
Stops playback and remembers the  
stop point (resume point).  
The resume point for a title/track is  
the last point you played or the last  
photo for a photo folder.  
[Setup]: Adjusts the player settings.  
[Photo]: Displays photos.  
[Music]: Plays music.  
[Video]: Plays videos.  
SUBTITLE (page 28)  
Selects the subtitle language when  
multi-lingual subtitles are recorded  
on BD-ROMs/DVD VIDEOs.  
[Input]: Perform Screen mirroring  
with compatible source device  
(BDP-S3200/S5200 only).  
[Network]: Displays network items.  
2 (volume) +/–  
Adjusts the TV volume.  
12  
 
Step 1: Connecting the Player  
Do not connect the mains lead until you have made all the connections.  
Connecting to your TV  
Connect the player to your TV with a High Speed HDMI Cable.  
High quality  
*
High Speed HDMI Cable  
* See “Supplied accessories” (page 36).  
13  
 
   
Connecting to your AV amplifier (receiver)  
Select one of the following connection methods according to the input jacks on your  
AV amplifier (receiver). When you select A or B, make the appropriate settings in  
the [Audio Settings] setup (page 27).  
*
High Speed HDMI Cable  
High Speed HDMI Cable  
(not supplied)  
t Set [BD Audio MIX Setting] (page 28).  
Coaxial digital cable  
(not supplied)  
* See “Supplied accessories” (page 36).  
14  
 
Step 2: Preparing for  
Network Connection  
Step 3: Easy Setup  
When turned on for the first time  
Wait for a short while before the  
player turns on and starts [Easy  
Initial Settings].  
If you are not going to connect the player  
to a network, proceed to “Step 3: Easy  
Setup” (page 15).  
Wired Setup  
1 Insert two R03 (size AAA)  
batteries by matching the 3 and  
# ends on the batteries to the  
markings inside the battery  
compartment of the remote.  
Use a LAN cable to connect to the LAN  
(100) terminal on the player.  
LAN cable  
(not supplied)  
Broadband ADSL modem/ Internet  
router  
Cable modem  
z
The use of a shielded and straight interface  
cable (LAN cable) is recommended.  
2 Connect the supplied AC adaptor  
and AC power cord (mains lead)  
in the numeric order shown  
below. When removing them, do  
so in reverse order.  
Wireless Setup (BDP-S3200/  
S5200 only)  
Use the wireless LAN that is built into  
the player.  
1 to DC IN 12 V  
ACadaptor(supplied)  
2
LAN cable (not supplied)  
3
AC power cord (mains lead)  
to mains  
Wireless LAN ADSL modem/ Internet  
(supplied)  
router  
Cable modem  
15  
 
     
3 Press [/1 to turn on the player.  
4 Turn on the TV and set the input  
selector on your TV. This will  
show the signal from the player  
on your TV screen.  
5 Perform [Easy Initial Settings].  
Follow the on-screen instructions to  
make the basic settings using  
</M/m/, and ENTER on the  
remote.  
</M/m/,  
ENTER  
b
When [Easy Initial Settings] is complete,  
select [Easy Network Settings] to use the  
network functions of the player.  
16  
 
Enjoying BONUSVIEW/  
BD-LIVE  
Playback  
Playing a Disc  
Some BD-ROMs with the “BD-LIVE”  
logo* have bonus contents and other  
data that can be downloaded for your  
enjoyment.  
For playable discs, see page 37.  
1 Switch the input selector on your  
TV so that the signal from the  
*
player appears on your TV screen.  
1 Connect a USB memory to the  
USB jack on the player (page 9).  
Use a 1 GB or larger USB memory  
as your local storage.  
2 Press Z, and place a disc on the  
disc tray.  
2 Prepare for BD-LIVE (BD-LIVE  
only).  
• Connect the player to a network  
(page 15).  
• Set [BD Internet Connection] in  
[BD/DVDViewingSettings]setup  
to [Allow] (page 28).  
Playing side facing down  
3 Insert a BD-ROM with  
BONUSVIEW/BD-LIVE.  
The operation method differs  
depending on the disc. Refer to the  
instruction manual supplied with the  
disc.  
3 Press Z to close the disc tray.  
Playback starts.  
If playback does not start  
automatically, select  
[Video], [Music], or  
[Photo] category, and press  
ENTER.  
in the  
z
To delete data in the USB memory, select  
[Delete BD Data] in the  
[Video]  
category, and press ENTER. All data stored in  
the buda folder will be erased.  
17  
 
   
Enjoying Blu-ray 3D  
(BDP-S5200 only)  
Displaying the play  
information  
You can enjoy a Blu-ray 3D Disc with  
the “Blu-ray 3D” logo*.  
You can view the playback information,  
etc., by pressing DISPLAY.  
The displayed information differs  
depending on the disc type and player  
status.  
*
1 Prepare for Blu-ray 3D Disc  
playback.  
Example: when playing a BD-ROM  
• Connect the player to your  
3D-compatible devices using a  
High Speed HDMI Cable.  
• Set [3D Output Setting] and [TV  
Screen Size Setting for 3D] in the  
[Screen Settings] setup (page 26).  
2 Insert a Blu-ray 3D Disc.  
The operation method differs  
depending on the disc. Refer to the  
instruction manual supplied with the  
disc.  
A Output resolution/Video frequency  
B Title number or name  
z
Refer also to the instruction manuals supplied  
with your TV and the connected device.  
C The currently selected angle  
D The currently selected audio setting  
E Available functions (  
angle,  
audio,  
subtitle)  
F Playback information  
Displays the Play mode, Playing  
status bar, Disc type, Video codec,  
Bitrate, Repeat type, Elapsed time,  
and Total playing time.  
G Chapter number  
18  
 
 
3 Select an Internet content and a  
variety of on-demand  
Playing from a USB  
Device  
entertainment using </M/m/,,  
and press ENTER.  
For “Playable types of files”, see  
page 38.  
Video streaming control panel  
The control panel appears when the  
video file starts playing. The displayed  
items may differ depending on Internet  
content providers.  
1 Connect the USB device to the  
USB jack on the player (page 9).  
Refer to the instruction manual  
supplied with the USB device before  
connecting.  
To display again, press DISPLAY.  
2 Select  
[Video],  
[Photo] category on the  
[Music],  
or  
home menu using </,.  
3 Select [USB device] using  
M/m, and press ENTER.  
A Control display  
Press </M/m/, or ENTER for  
playback operations.  
Playing via a Network  
B Playing status bar  
Status bar, Cursor indicating the  
current position, Playing time,  
Duration of the video file  
Enjoying Sony Entertainment  
Network  
C Network condition  
indicates the signal strength for  
wireless connection (BDP-S3200/  
S5200 only).  
Sony Entertainment Network serves as a  
gateway, delivering the selected Internet  
content and a variety of on-demand  
entertainment straight to your player.  
indicates the wired connection.  
D Network transmission speed  
z
E The file name of the next video  
• Some Internet content requires registration  
via a PC before it can be played.  
• Some Internet content may not be available  
in some regions/countries.  
F The file name of the current video  
selection  
1 Connect the player to a network  
(page 15).  
2 Press SEN button on the remote.  
19  
 
     
To play a file from a DLNA server via  
another product (Renderer)  
When you play files from a DLNA  
Server on this unit, you can use a DLNA  
Controller-compatible product (a phone,  
etc.), to control playback.  
Playing files on a Home  
Network (DLNA) (BDP-S3200/  
S5200 only)  
A DLNA-compatible product can play  
video/music/photo files stored on  
another DLNA-compatible product via a  
network.  
Server  
1 Prepare to use DLNA.  
• Connect the player to a network  
(page 15).  
Renderer  
• Prepare the other necessary  
DLNA-compatible products.  
Refer to the instruction manual  
supplied with the product.  
Controller  
Control this unit using a DLNA  
controller. Refer to the instruction  
manual supplied with the DLNA  
controller.  
To play a file from a DLNA server via  
this unit (DLNA player)  
Server  
Player  
Select the DLNA server icon from  
[Video],  
[Music], or  
[Photo]  
category, then choose the file you want  
to play.  
20  
 
Using “TV SideView”  
(BDP-S3200/S5200 only)  
Using Screen mirroring  
(BDP-S3200/S5200 only)  
“TV SideView” is a free mobile  
application for remote devices (such as  
smartphone, etc.). By using “TV  
SideView” with this player, you can  
easily enjoy the player by using the  
operation on your remote device. You  
can launch a service or application  
directly from the remote device and view  
the disc information during disc  
playback. “TV SideView” also can be  
used as a remote control and software  
keyboard.  
Before you use the “TV SideView”  
device with this player for the first time,  
be sure to register the “TV SideView”  
device. Follow the on-screen  
instructions on the “TV SideView”  
device for registration.  
“Screen mirroring” is a function to  
display the screen of a mobile device on  
the TV by Miracast technology.  
The player can be connected directly  
with a Screen mirroring compatible  
device (e.g. smartphone, tablet). You can  
enjoy the display screen of the device on  
your large TV screen. No wireless router  
(or access point) is required to use this  
feature.  
b
• When using Screen mirroring, the quality of  
picture and sound may sometimes be  
deteriorated due to interference from other  
network.  
• Some network functions may not be  
available during Screen mirroring.  
• Make sure that the device is compatible with  
Miracast. Connectivity with all Miracast  
compatible devices is not guaranteed.  
b
The registration can only be performed on the  
Home Menu.  
1 Select [Screen mirroring] from  
[Input] category on the home  
menu using </,, and press  
ENTER.  
2 Follow the on-screen  
instructions.  
21  
 
x [Top Menu]: Displays the BD’s or  
DVD’s Top Menu.  
x [Menu]/[Popup Menu]: Displays the  
BD-ROM’s Pop-up Menu or DVD’s  
menu.  
x [Title Search]: Searches for a title on  
BD-ROMs/DVD VIDEOs and starts  
playback from the beginning.  
x [Chapter Search]: Searches for a  
chapter and starts playback from the  
beginning.  
Available Options  
Various settings and playback  
operations are available by pressing  
OPTIONS. The available items differ  
depending on the situation.  
Common options  
x [Repeat Setting]: Sets the repeat  
mode.  
x [3D Menu] (BDP-S5200 only):  
– [Simulated 3D]: Adjusts the  
simulated 3D effect.  
– [3D Depth Adjustment]: Adjusts the  
depth of 3D image.  
– [2D Playback]: Sets playback to 2D  
image.  
x [Play]/[Stop]: Starts or stops the  
x [Audio]: Switches the language track  
when multilingual tracks are recorded  
on BD-ROMs/DVD VIDEOs. Selects  
the sound track on CDs.  
x [Subtitle]: Switches the subtitle  
language when multilingual subtitles  
are recorded on BD-ROMs/DVD  
VIDEOs.  
playback.  
x [Play from start]: Plays the item  
from the beginning.  
x [Angle]: Switches to other viewing  
angles when multi-angles are  
recorded on BD-ROMs/DVD  
VIDEOs.  
x [Change Category]: Switches  
category between  
[Music] and  
[Video],  
[Photo] category.  
x [Number Entry]: Selects the number  
by using </M/m/, key on the  
remote.  
x [IP Content Noise Reduction]:  
Adjusts the picture quality of Internet  
contents.  
x [Video Search] (BDP-S3200/S5200  
only): Displays information on the  
BD-ROM/DVD-ROM based on  
Gracenote technology.  
Searches for related information using  
keywords from Gracenote when  
selecting [Cast] or [Related].  
Displays a list of titles when selecting  
[Playback History] or [Search  
History].  
[Video] only  
x [3D Output Setting] (BDP-S5200  
only): Sets whether or not to output  
3D video automatically.  
x [A/V SYNC]: Adjusts the gap between  
picture and sound, by delaying the  
sound output in relation to the picture  
output (0 to 120 milliseconds).  
x [Video Settings]:  
– [Picture Quality Mode]: Selects the  
picture settings for different lighting  
environments.  
– [BNR]: Reduces the mosaic-like  
block noise in the picture.  
– [MNR]: Reduces minor noise  
around the picture outlines  
(mosquito noise).  
x [Pause]: Pauses the playback.  
22  
 
   
[Music] only  
x [Track Search]: Searches the track  
number during music CD playback.  
x [Add Slideshow BGM]: Registers  
music files in the USB memory as  
slideshow background music (BGM).  
x [MusicSearch](BDP-S3200/S5200  
only): Displays information on the  
audio CD (CD-DA) based on  
Gracenote technology.  
Searches for related information using  
keywords from Gracenote when  
selecting [Track], [Artist] or  
[Related].  
Displays a list of titles when selecting  
[Playback History] or [Search  
History].  
[Photo] only  
x [Slideshow Speed]: Changes the  
slideshow speed.  
x [Slideshow Effect]: Sets the effect  
for slideshows.  
x [Slideshow BGM]:  
– [Off]: Turns off the function.  
– [My Music from USB]: Sets the  
music files registered in [Add  
Slideshow BGM].  
– [Play from Music CD]: Sets the  
tracks in CD-DAs.  
x [Change Display]: Switches  
between [Grid View] and [List View].  
x [View Image]: Displays the selected  
photo.  
x [Slideshow]: Plays a slideshow.  
x [Rotate Left]: Rotates the photo  
counterclockwise by 90 degrees.  
x [Rotate Right]: Rotates the photo  
clockwise by 90 degrees.  
23  
 
Internet browser display  
Internet (BDP-S3200/S5200  
only)  
You can check the website information  
by pressing DISPLAY.  
The display information differs  
depending on the website and page  
status.  
Browsing Websites  
You can connect to the Internet and  
enjoy websites.  
1 Prepare the Internet Browser.  
Connect the player to a network  
(page 15).  
2 Select  
[Network] on the home  
menu using </,.  
3 Select  
[Internet Browser]  
using M/m, and press ENTER.  
A Page title  
B Page address  
z
C Cursor  
This browser does not support some websites  
functions, and some websites may not be  
shown correctly.  
Move by pressing </M/m/,.  
Place the cursor on the link you want  
to view, then press ENTER. The  
linked website is displayed.  
To enter a URL  
Select [URL entry] from the options  
menu. Enter the URL using the software  
keyboard, then select [Enter].  
D SSL icon  
Displays when the website is  
protected and connected safely.  
To set the default start page  
While displaying the page you want to  
set, select [Set as start page] from the  
options menu.  
E Signal strength indicator (wireless  
network connection only)  
(BDP-S3200/S5200 only)  
F Progress bar/Loading icon  
Appears when the page is being  
read, or during file download/  
transfer.  
To return to the previous page  
Select [Previous page] from the options  
menu.  
When the previous page does not appear  
even if you select [Previous page], select  
[Window List] from the options menu  
and select the page you want to return to  
from the list.  
G Text input field  
Press ENTER and select [Input]  
from the options menu to display the  
software keyboard.  
To quit the Internet browser  
Press HOME.  
H Scroll bar  
Press </M/m/, to move the page  
display left, up, down or right.  
24  
 
   
x [Set as start page]: Sets the  
currently displayed website as the  
default start page.  
Available options  
x [Open in new window]: Opens a link  
in a new window.  
x [Character encoding]: Sets the  
character code.  
x [Display certificate]: View server  
certificates sent from pages that  
support SSL.  
Various settings and operations are  
available by pressing OPTIONS.  
The available items differ depending on  
the situation.  
x [Browser Setup]: Displays the  
Internet Browser settings.  
– [Zoom]: Increases or decreases the  
size of the displayed contents.  
– [JavaScript Setup]: Enables or  
disables JavaScript.  
– [Cookie Setup]: Sets whether or not  
to accept cookies.  
– [SSL Alarm Display]: Enables or  
disables SSL.  
x [Input]: Displays the software  
keyboard to enter characters while  
browsing a website.  
x [Break]: Moves the cursor to the next  
line in the text input field.  
x [Delete]: Erases one character on the  
left side of the cursor during text  
input.  
x [Window List]: Displays a list of  
currently opened website windows.  
Allows you to return to a previously  
displayed website by selecting the  
window.  
x [Bookmark List]: Displays the  
bookmark list.  
x [URL entry]: Allows you to enter a  
URL when the software keyboard is  
displayed.  
x [Previous page]/[Next page]:  
Moves to the previous/next page.  
x [Cancel loading]: Stops loading a  
page.  
x [Reload]: Reloads the same page.  
x [Add to Bookmark]: Adds the  
currently displayed website to the  
bookmark list.  
25  
 
• For information about update functions,  
consult your nearest Sony dealer or local  
authorised Sony Service facility. You can  
also visit the following website:  
Settings and Adjustments  
Using the Settings  
Displays  
[Screen Settings]  
Select  
[Setup] on the home menu  
when you need to change the settings of  
the player.  
The default settings are underlined.  
[Auto]: Normally select this.  
[Off]: Select this to display all content in  
2D.  
1 Select  
[Setup] on the home  
menu using </,.  
2 Select the setup category icon  
x [TV Screen Size Setting for 3D]  
(BDP-S5200 only)  
using M/m, and press ENTER.  
Sets the screen size of your  
3D-compatible TV.  
[Software Update]  
x [TV Type]  
[16:9]: Select this when connecting to a  
wide-screen TV or a TV with a wide  
mode function.  
[4:3]: Select this when connecting to a  
4:3 screen TV without a wide mode  
function.  
x [Update via Internet]  
Updates the player’s software using  
available network. Make sure that the  
network is connected to the Internet. For  
details, see “Step 2: Preparing for  
Network Connection” (page 15).  
x [Screen Format]  
x [Update via USB Memory]  
Updates the player’s software using  
USB memory. Make sure that the  
Software Update Folder is correctly  
named as “UPDATE” and all the update  
files must be stored in this folder. The  
player can recognise up to 500 files/  
folders in a single layer including the  
update files/folders.  
[Full]: Select this when connecting to a  
TV with a wide mode function. Displays  
a 4:3 screen picture in 16:9 aspect ratio  
even on a wide-screen TV.  
[Normal]: Changes the picture size to fit  
the screen size with the original picture  
aspect ratio.  
z
• We recommend performing the software  
update every 2 months or so.  
26  
 
           
x [DVD Aspect Ratio]  
x [DVD-ROM 24p Output]  
[Letter Box]: Displays a wide picture  
with black bands on the top and bottom.  
[Auto]: Outputs 1920 × 1080p/24 Hz  
video signals only when connecting a  
1080/24p-compatible TV using the  
HDMI OUT jack.  
[Off]: Select this when your TV is not  
compatible with 1080/24p video signals.  
x [YCbCr/RGB (HDMI)]  
[Pan & Scan]: Displays a full-height  
picture on the entire screen, with  
trimmed sides.  
[Auto]: Automatically detects the  
connected TV type, and switches to the  
matching colour setting.  
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2  
video signals.  
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4  
video signals.  
[RGB]: Outputs RGB video signals.  
x [HDMI Deep Colour Output]  
[Auto]: Normally select this.  
[16bit]/[12bit]/[10bit]: Outputs 16bit/  
12bit/10bit video signals when the  
connected TV is compatible with Deep  
Colour.  
x [Cinema Conversion Mode]  
[Auto]: Normally select this. The player  
automatically detects whether the  
material is video-based or film-based,  
and switches to the appropriate  
conversion method.  
[Off]: Select this when the picture is  
unstable or colours appear unnatural.  
[Video]: The conversion method suited  
for video-based material will always be  
selected regardless of the material.  
x [Pause Mode]  
[Auto]: Normally select this. Dynamic  
moving pictures appear without blurring.  
[Frame]: Displays static pictures at high  
resolution.  
x [Output Video Resolution]  
Normally select [Auto]. Select [Original  
Resolution] to output the resolution  
recorded on the disc. When the  
resolution is lower than the SD  
resolution, it is scaled up to the SD  
resolution.  
[Audio Settings]  
x [BD-ROM 24p Output]  
[Auto]: Outputs 1920 × 1080p/24 Hz  
video signals only when connecting a  
1080/24p-compatible TV using the  
HDMI OUT jack.  
[On]: Turns on the function.  
[Off]: Select this when your TV is not  
compatible with 1080/24p video signals.  
x [Digital Audio Output]  
[Auto]: Normally select this. Outputs  
audio signals according to the status of  
the connected devices.  
[PCM]: Outputs PCM signals from the  
DIGITAL OUT (COAXIAL)/HDMI  
OUT jack.  
27  
 
         
x [BD Audio MIX Setting]  
[BD/DVD Viewing  
Settings]  
[On]: Outputs the audio obtained by  
mixing the interactive and secondary  
audio to the primary audio.  
[Off]: Outputs the primary audio only.  
Select this to output HD audio signals to  
an AV amplifier (receiver).  
x [BD/DVD Menu Language]  
Selects the default menu language for  
BD-ROMs or DVD VIDEOs.  
Select [Select Language Code], and  
enter the code for your language,  
referring to “Language code list”  
(page 41).  
x [Dolby D Compatible Output]  
[On]: Converts DTS audio source to  
Dolby Digital audio by using EDID  
(Extended Display Identification Data).  
[Off]: Turns off the function.  
x [Audio Language]  
x [Audio DRC]  
Selects the default track language for  
BD-ROMs or DVD VIDEOs.  
When you select [Original], the  
language given priority in the disc is  
selected.  
[Auto]: Performs playback at the  
dynamic range specified by the disc  
(BD-ROM only). Other discs are played  
back at the [On] level.  
[On]: Performs playback at a standard  
compression level.  
[Off]: No compression works. A more  
dynamic sound is produced.  
Select [Select Language Code], and  
enter the code for your language,  
referring to “Language code list”  
(page 41).  
x [Downmix]  
x [Subtitle Language]  
[Surround]: Outputs audio signals with  
surround effects. Select this when  
connecting an audio device that supports  
Dolby Surround (Pro Logic) or DTS  
Neo:6.  
[Stereo]: Outputs audio signals without  
surround effects. Select this when  
connecting an audio device that does not  
support Dolby Surround (Pro Logic) or  
DTS Neo:6.  
Selects the default subtitle language for  
BD-ROMs or DVD VIDEOs.  
Select [Select Language Code], and  
enter the code for your language,  
referring to “Language code list”  
(page 41).  
x [BD Hybrid Disc Playback Layer]  
[BD]: Plays BD layer.  
[DVD/CD]: Plays DVD or CD layer.  
x [BD Internet Connection]  
[Allow]: Normally select this.  
[Do not allow]: Prohibits Internet  
connection.  
28  
 
           
[Parental Control  
Settings]  
[System Settings]  
x [OSD Language]  
Selects on-screen display language for  
your player.  
x [Password]  
Sets or changes the password for the  
Parental Control function. A password  
allows you to set a restriction on  
BD-ROM or DVD VIDEO, and Internet  
video playback. If necessary, you can  
differentiate the restriction levels for  
BD-ROMs, DVD VIDEOs, and Internet  
videos.  
x [HDMI Settings]  
By connecting Sony components that are  
compatible with HDMI functions with a  
High Speed HDMI Cable, operation is  
simplified.  
[Control for HDMI]  
[On]: The following BRAVIA Sync  
features are available:  
– One-Touch Play  
– System Power-Off  
– Language Follow  
x [Parental Control Area Code]  
Playback of some BD-ROMs, DVD  
VIDEOs, or Internet videos can be  
limited according to the geographic area.  
Scenes may be blocked or replaced with  
different scenes. Follow the on-screen  
instructions and enter your four-digit  
password.  
[Off]: Turns off the function.  
z
For details, refer to the instruction manual  
supplied with the TV or components.  
x [BD Parental Control] /  
[DVD Parental Control] /  
[Linked to TV-off]  
[On]: Automatically turns off the player  
and HDMI-compatible components  
when the connected TV enters standby  
mode (BRAVIA Sync).  
[Internet Video Parental Control]  
By setting Parental Control, scenes can  
be blocked or replaced with different  
scenes. Follow the on-screen  
instructions and enter your four-digit  
password.  
[Off]: Turns off the function.  
x [Internet Video Unrated]  
[Allow]: Allows the playback of unrated  
Internet videos.  
[Block]: Blocks the playback of unrated  
Internet videos.  
29  
 
       
x [Startup Screen]  
Set the startup screen when turning on  
the player.  
[Network Service Screen]: Starts on  
Sony Entertainment Network portal  
screen.  
x [Gracenote Settings] (BDP-S3200/  
S5200 only)  
[Auto]: Automatically downloads disc  
information when disc playback stops.  
Connect to the network for  
downloading.  
[Home Menu Screen]: Starts on home  
menu.  
[Manual]: Downloads the disc  
information when [Video Search] or  
[Music Search] is selected.  
x [Quick Start Mode]  
[On]: Shortens the startup time when  
turning on the player.  
x [Device Name] (BDP-S3200/S5200  
only)  
[Off]: Reduces standby power  
consumption.  
Displays the player’s name. The player’s  
name can be changed.  
x [Auto Standby]  
x [System Information]  
[On]: Automatically returns to standby  
mode if no button is pressed for more  
than 20 minutes.  
Displays the player’s software version  
information and the MAC address.  
[Off]: Turns off the function.  
x [Software License Information]  
Displays information about the Software  
License.  
x [Auto Display]  
[On]: Automatically displays  
information on the screen when  
changing the viewing titles, picture  
modes, audio signals, etc.  
[Off]: Displays information only when  
you press DISPLAY.  
[Network Settings]  
x [Internet Settings]  
Connect the player to the network  
beforehand. For details, see “Step 2:  
Preparing for Network Connection”  
(page 15).  
[Wired Setup] (BDP-S3200/S5200  
only): Select this when you connect to a  
broadband router using a LAN cable.  
[Wireless Setup(built-in)] (BDP-S3200/  
S5200 only): Select this when you use  
the wireless LAN that is built into the  
player for wireless network connection.  
x [Screen Saver]  
[On]: Turns on the screen saver function.  
The screen saver image appears when  
you do not use the player for more than  
10 minutes while an on-screen display is  
displayed.  
[Off]: Turns off the function.  
x [Software Update Notification]  
[On]: Sets the player to inform you of  
newer software version information  
(page 26).  
x [Network Connection Status]  
Displays the current network status.  
[Off]: Turns off the function.  
30  
 
   
x [Network Connection  
Diagnostics]  
Checks for the proper network  
connection by running the network  
diagnostics.  
[Easy Network  
Settings]  
Select [Easy Network Settings] to  
specify the network settings. Follow the  
on-screen instructions.  
x [Connection Server Settings]  
(BDP-S3200/S5200 only)  
Sets whether or not to display the  
connected server.  
[Resetting]  
x [Auto Renderer Access  
Permission] (BDP-S3200/S5200  
only)  
[On]: Allows automatic access from  
newly detected DLNA controller-  
compatible product.  
x [Reset to Factory Default Settings]  
Resets the player settings to the factory  
default by selecting the group of settings.  
All the settings within the group will be  
reset.  
[Off]: Turn off the function.  
x [Renderer Access Control]  
(BDP-S3200/S5200 only)  
Displays a list of DLNA controller-  
compatible products and sets whether or  
not each product is accessible via this  
player.  
x [Initialise Personal Information]  
Erases your personal information stored  
in the player.  
b
If you dispose, transfer or resell this unit,  
please delete all Personal Information for  
security purposes. Please take the appropriate  
measures such as logging out after using a  
network service.  
x [Registered Remote Devices]  
(BDP-S3200/S5200 only)  
Displays a list of your registered remote  
devices.  
x [Remote Start]  
[On]: Turns the player on or off using  
your remote device when connecting to  
the network.  
[Off]: Turns off the functions.  
31  
 
   
The display language on the screen  
switches automatically when  
, When [Control for HDMI] in [HDMI  
Settings] is set to [On] (page 29), the  
display language on the screen  
Additional Information  
Troubleshooting  
If you experience any of the following  
difficulties while using the player, use  
this troubleshooting guide to help  
remedy the problem before requesting  
repairs. Should any problem persist,  
consult your nearest Sony dealer.  
automatically switches according to  
the language setting of the connected  
TV (if you change the setting on your  
TV, etc.).  
Sound  
Picture  
There is no sound or the sound is not  
output correctly.  
There is no picture or the picture is  
not output correctly.  
, Check that all the connecting cables  
are securely connected (page 13).  
, Switch the input selector on your AV  
amplifier (receiver) so that the audio  
signals of the player are output from  
your AV amplifier (receiver).  
, Check that all the connecting cables  
are securely connected (page 13).  
, Switch the input selector on your TV  
to display the signal from the player.  
, Reset the [Output Video Resolution] to  
the lowest resolution by pressing  
x (stop), HOME, and then POP UP/  
MENU button on the remote.  
, If the audio signal does not come  
through the DIGITAL OUT  
(COAXIAL)/HDMI OUT jack, check  
the audio settings (page 27).  
, Try the following: 1Turn the player  
off and on again. 2Turn the connected  
equipment off and on again.  
, For HDMI connections, try the  
following: 1Turn the player off and  
on again. 2Turn the connected  
equipment off and on again.  
3Disconnect and then reconnect the  
HDMI cable.  
3Disconnect and then reconnect the  
HDMI cable.  
, The HDMI OUT jack is connected to a  
DVI device that does not support  
copyright protection technology.  
, Check the [Output Video Resolution]  
settings in the [Screen Settings] setup  
(page 27).  
, For BD-ROMs, check the [BD-ROM  
24p Output] setting in the [Screen  
Settings] setup (page 27).  
, For HDMI connections, if the player is  
connected to a TV through an AV  
amplifier (receiver), try connecting the  
HDMI cable directly to the TV. Refer  
also to the instruction manual supplied  
with the AV amplifier (receiver).  
, The HDMI OUT jack is connected to a  
DVI device (DVI jacks do not accept  
audio signals).  
, For DVD-ROMs, check the  
[DVD-ROM 24p Output] setting in the  
[Screen Settings] setup (page 27).  
32  
 
   
, The device connected to the HDMI  
OUT jack does not support the audio  
format of the player. Check the audio  
settings (page 27).  
Disc  
The disc does not play.  
, The disc is dirty or skewed.  
The HD Audio (Dolby Digital Plus,  
Dolby TrueHD, DTS-HD High  
Resolution Audio, and DTS-HD  
Master Audio) is not output by  
bitstream.  
, Set [BD Audio MIX Setting] in [Audio  
Settings] setup to [Off] (page 28).  
, Check that the connected AV amplifier  
(receiver) is compatible with each HD  
Audio format.  
, The disc is upside down. Insert the disc  
with the playback side facing down.  
, The disc has a format that cannot be  
played back by this player (page 37).  
, The player cannot play a recorded disc  
that is not correctly finalised.  
, The region code on the BD or DVD  
does not match the player.  
USB device  
The interactive audio is not output.  
, Set [BD Audio MIX Setting] in [Audio  
Settings] setup to [On] (page 28).  
The player does not detect a USB  
, Make sure that the USB device is  
securely connected to the USB jack.  
, Check if the USB device or a cable is  
damaged.  
, Check if the USB device is on.  
, If the USB device is connected via a  
USB hub, connect the USB device  
directly to the player.  
Message Code 3 [Audio outputs  
temporarily muted. Do not adjust the  
playback volume. The content being  
played is protected by Cinavia and is  
not authorized for playback on this  
device. For more information, see  
Code 3.] appears on the screen when  
playing a disc.  
Sony Entertainment Network  
, The audio track of the video that you  
are playing contains a Cinavia code  
indicating that it is an unauthorised  
copy of professionally-produced  
content (page 4).  
The picture/sound is poor/certain  
programmes display a loss of detail,  
especially during fast-motion or dark  
scenes.  
, Picture/sound quality may be  
improved by changing the connection  
speed. Recommended connection  
speed is of at least 2.5 Mbps for  
standard definition video (10 Mbps for  
high definition video).  
The picture is small.  
, Press M to zoom in.  
33  
 
The desired wireless router do not  
appear in the wireless network list  
(BDP-S3200/S5200 only).  
, Press RETURN to return to the  
previous screen, and try wireless setup  
again. If the desired wireless router is  
still not detected, select [New  
Network connection  
The player cannot connect to the  
network.  
, Check the network connection  
(page 15) and the network settings  
(page 30).  
connection registration] to perform  
[Manual registration].  
The PC cannot connect to the Internet  
after [Wi-Fi Protected Setup (WPS)] is  
performed (BDP-S3200/S5200 only).  
, The wireless settings of the router may  
change automatically if you use the  
Wi-Fi Protected Setup function before  
adjusting the settings of the router. In  
this case, change the wireless settings  
of your PC accordingly.  
The message [A new software version  
is available. Please go to the “Setup”  
section of the menu and select  
“Software Update” to perform the  
update.] appears on the screen when  
turning the player on.  
, See [Software Update] (page 26) to  
update the player to a newer software  
version.  
You cannot connect the player to the  
wireless LAN router (BDP-S3200/  
S5200 only).  
, Check if the wireless LAN router is on.  
, Depending on the surrounding  
environment, such as the wall material,  
radio wave receiving condition, or  
obstacles between the player and the  
wireless LAN router, the  
Control for HDMI (BRAVIA  
Sync)  
The [Control for HDMI] function does  
not work (BRAVIA Sync).  
, Check that [Control for HDMI] in  
[HDMI Settings] is set to [On]  
(page 29).  
, If you change the HDMI connection,  
turn the player off and on again.  
, If power failure occurs, set [Control  
for HDMI] in [HDMI Settings] to  
[Off], then set [Control for HDMI] in  
[HDMI Settings] to [On] (page 29).  
, Check the following and refer to the  
instruction manual supplied with the  
component.  
communication distance may be  
shortened. Move the player and the  
wireless LAN router closer to each  
other.  
, Devices that use a 2.4 GHz frequency  
band, such as a microwave, Bluetooth,  
or digital cordless device, may  
interrupt the communication. Move  
the player away from such devices, or  
turn off such devices.  
– the connected component is  
compatible with the [Control for  
HDMI] function.  
– the connected component’s setting  
for the [Control for HDMI] function  
is correct.  
34  
 
, When you connect the player to a TV  
through an AV amplifier (receiver),  
– if the AV amplifier (receiver) is not  
compatible with the [Control for  
HDMI] function, you may be unable  
to control the TV from the player.  
– if you change the HDMI  
Message Code 1 [Playback stopped.  
The content being played is protected  
by Cinavia and is not authorized for  
playback on this device. For more  
information, see http://  
appears on the screen when playing a  
disc.  
connection, disconnect and  
reconnect the mains lead, or a power  
failure occurs, try the following:  
1Switch the input selector of the  
AV amplifier (receiver) so that the  
picture from the player appears on  
the TV screen. 2Set [Control for  
HDMI] in [HDMI Settings] to [Off],  
then set [Control for HDMI] in  
[HDMI Settings] to [On] (page 29).  
Refer to the instruction manual  
supplied with the AV amplifier  
(receiver).  
, The audio track of the video that you  
are playing contains a Cinavia code  
indicating it was intended for  
presentation using professional  
equipment only and is not authorised  
for playback by consumers (page 4).  
The disc tray does not open and you  
cannot remove the disc even after you  
press Z.  
, Try the following: 1Turn the player  
off, and disconnect the mains lead.  
2Reconnect the mains lead while  
pressing down Z on the player.  
3Keep pressing down Z on the player  
until the tray opens. 4Remove the  
disc.  
The System Power-Off function does  
not work (BRAVIA Sync).  
, Check that [Control for HDMI] and  
[Linked to TV-off] in [HDMI Settings]  
are set to [On] (page 29).  
The player does not respond to any  
button.  
Others  
, Moisture has condensed inside the  
player (page 2).  
Playback does not start from the  
beginning of content.  
, Press OPTIONS, and select [Play from  
start].  
Playback does not start from the  
resume point where you last stopped  
playing.  
, The resume point may be cleared from  
memory depending on the disc when  
– you open the disc tray.  
– you disconnect the USB device.  
– you play other content.  
– you turn off the player.  
35  
 
Operating temperature:  
5 ºC to 35 ºC  
Specifications  
Operating humidity:  
25 % to 80 %  
System  
Laser: Semiconductor laser  
Supplied accessories  
AC adaptor (AC-M1208WW) (1)  
AC power cord (mains lead) (1)  
High Speed HDMI Cable (BDP-S1200  
only) (1)  
Remote commander (remote) (1)  
R03 (size AAA) batteries (2)  
Inputs and outputs  
(Jack name:  
Jack type/Output level/Load  
impedance)  
DIGITAL OUT (COAXIAL):  
Phono jack/0.5 Vp-p/75 ohms  
HDMI OUT:  
HDMI 19-pin standard connector  
LAN (100):  
Specifications and design are subject to  
change without notice.  
100BASE-TX Terminal  
USB:  
USB jack Type A (For connecting a  
USB memory, memory card reader,  
digital still camera, and digital video  
camera)  
DC IN:  
BDP-S1200: 12 V DC, 600 mA  
BDP-S3200: 12 V DC, 650 mA  
BDP-S5200: 12 V DC, 750 mA  
Wireless (BDP-S3200/S5200 only)  
Wireless LAN standard:  
IEEE 802.11 b/g/n  
Frequency range:  
2.4 GHz band: Channels 1-13  
Modulation:  
DSSS and OFDM  
General  
Power requirements:  
12 V DC with AC adaptor  
Rating: Input 220 V - 240 V AC,  
50/60 Hz  
Power consumption (when using AC  
adaptor):  
BDP-S1200: 8.8 W  
BDP-S3200: 9.5 W  
BDP-S5200: 11 W  
Dimensions (approx.):  
265 mm × 199 mm × 43 mm  
(width/depth/height)  
incl. projecting parts  
Mass (approx.): 0.9 kg  
36  
 
   
Note on Discs  
Playable discs  
This product is designed to playback  
discs that conform to the Compact Disc  
(CD) standard. DualDiscs and some of  
the music discs encoded with copyright  
protection technologies do not conform  
to the Compact Disc (CD) standard,  
therefore, these discs may not be  
playable by this product.  
Blu-ray  
Disc*1  
BD-ROM  
BD-R*2/BD-RE*2  
DVD*3  
DVD-ROM  
DVD-R/DVD-RW  
DVD+R/DVD+RW  
CD*3  
CD-DA (Music CD)  
CD-ROM  
CD-R/CD-RW  
Note on playback operations of BDs/  
DVDs  
Some playback operations of BDs/  
DVDs may be intentionally set by  
software producers. Since this player  
plays BDs/DVDs according to the disc  
contents the software producers  
designed, some playback features may  
not be available.  
*1  
Since the Blu-ray Disc specifications are  
new and evolving, some discs may not be  
playable depending on the disc type and the  
version.  
The audio output differs depending on the  
source, connected output jack, and selected  
audio settings.  
*2  
*3  
BD-RE: Ver.2.1  
Note about double-layer BDs/DVDs  
The playback pictures and sound may be  
momentarily interrupted when the layers  
switch.  
BD-R: Ver.1.1, 1.2, 1.3 including organic  
pigment type BD-R (LTH type)  
The BD-Rs recorded on a PC cannot be  
played if postscripts are recordable.  
A CD or DVD disc will not play if it has not  
been correctly finalised. For more  
information, refer to the instruction manual  
supplied with the recording device.  
Region code (BD-ROM/DVD VIDEO  
only)  
Your player has a region code printed on  
the rear of the unit and will only play  
BD-ROMs/DVD VIDEOs labelled with  
Discs that cannot be played  
• BDs with cartridge  
• BDXLs  
identical region codes or  
.
ALL  
• DVD-RAMs  
Region code  
• HD DVDs  
• DVD Audio discs  
• PHOTO CDs  
• Data part of CD-Extras  
• Super VCDs  
• Audio material side on DualDiscs  
37  
 
   
Playable types of files  
Video  
Codec  
Container Extension  
With Audio  
PS  
.mpg, .mpeg Dolby Digital, DTS, LPCM, MPEG  
MPEG-1  
Video*1  
MKV  
PS*3  
.mkv  
Dolby Digital, LPCM, AAC, MP3  
.mpg, .mpeg Dolby Digital, DTS, LPCM, MPEG  
MPEG-2  
Video*2  
TS*4  
MKV*1  
.m2ts, .mts  
.mkv  
Dolby Digital, DTS, LPCM, MPEG, AAC  
Dolby Digital, LPCM, AAC, MP3  
Dolby Digital, LPCM, WMA9, MP3  
Dolby Digital, LPCM, AAC, MP3  
Dolby Digital, LPCM, AAC, MP3  
AAC  
AVI  
.avi  
Xvid  
MKV  
MKV*1  
MP4*1  
TS*1  
.mkv  
.mkv  
.mp4, .m4v  
.m2ts, .mts  
Dolby Digital, DTS, LPCM, MPEG, AAC  
MPEG4/AVC*5  
Quick  
.mov  
Dolby Digital, LPCM, AAC, MP3  
LPCM, AAC, MP3  
AAC  
Time*6  
FLV*6  
.flv, .f4v  
3gpp/  
.3gp, .3g2,  
.3gpp, .3gp2  
3gpp2*6  
TS  
.m2ts, .mts  
.mkv  
Dolby Digital, DTS, LPCM, MPEG, AAC  
Dolby Digital, LPCM, AAC, MP3  
WMA9  
VC1*1  
MKV  
ASF  
MKV  
.wmv, .asf  
.mkv  
WMV9*1  
Motion JPEG*6  
Format  
Dolby Digital, LPCM, AAC, MP3  
Dolby Digital, LPCM, AAC, MP3  
Dolby Digital, LPCM, AAC, MP3  
Quick Time .mov  
AVI .avi  
AVCHD (Ver.2.0)*1*7*8  
38  
 
 
*11  
For MPO files other than 3D, the key  
image or the first image is displayed  
(BDP-S5200 only).  
Music  
Codec  
Extension  
.mp3  
MP3 (MPEG-1 Audio  
b
Layer III)*9  
• Some files may not play depending on the  
file format, the encoding, or recording  
condition (BDP-S1200 only).  
AAC/HE-AAC*1*9  
WMA9 Standard*1  
LPCM*9  
FLAC*6  
Dolby Digital*6*9  
.m4a, .aac*6  
.wma  
• Some files may not play depending on the  
file format, file encoding, recording  
condition, or DLNA server condition  
(BDP-S3200/S5200 only).  
• Some files edited on a PC may not play.  
• Some files may not be able to perform fast  
forward or fast reverse function.  
• The player does not play coded files such as  
DRM and Lossless.  
• The player can recognise the following files  
or folders in BDs, DVDs, CDs and USB  
devices:  
– up to folders in the 9th layer, including the  
root folder.  
– up to 500 files/folders in a single layer.  
• The player can recognise the following files  
or folders stored in the DLNA server  
(BDP-S3200/S5200 only):  
– up to folders in the 19th layer.  
– up to 999 files/folders in a single layer.  
• The player can support frame rate:  
– up to 60 fps for AVCHD (MPEG4/AVC)  
only.  
– up to 30 fps for other video codecs.  
• The player can support video bit rate up to  
40 Mbps.  
• Some USB devices may not work with this  
player.  
.wav  
.flac, .fla  
.ac3  
Photo  
Format  
JPEG  
PNG  
GIF  
Extension  
.jpeg, .jpg, .jpe  
.png*10  
.gif*10  
.mpo*6*11  
MPO  
*1  
The player may not play this file format on  
a DLNA server (BDP-S3200/S5200 only).  
The player can only play standard  
definition video on a DLNA server  
(BDP-S3200/S5200 only).  
The player does not play DTS format files  
on a DLNA server (BDP-S3200/S5200  
only).  
*2  
*3  
*4  
The player can only play Dolby Digital  
format files on a DLNA server  
(BDP-S3200/S5200 only).  
*5  
*6  
*7  
*8  
• The player can recognise Mass Storage  
Class (MSC) devices (such as flash memory  
or an HDD), Still Image Capture Device  
(SICD) class devices and 101 keyboard.  
• To avoid data corruption or damage to the  
USB memory or devices, turn off the player  
when connecting or removing the USB  
memory or devices.  
• The player may not play high bit rate video  
files on DATA CDs smoothly. It is  
recommended to play such files using  
DATA DVDs or DATA BDs.  
The player can support AVC up to Level  
4.1.  
The player does not play this file format on  
a DLNA server (BDP-S3200/S5200 only).  
The player can support frame rate up to  
60 fps.  
The player plays AVCHD format files that  
are recorded on a digital video camera, etc.  
The AVCHD format disc will not play if it  
has not been correctly finalised.  
The player can play “.mka” files.  
(This file cannot be played on a DLNA  
server (BDP-S3200/S5200 only).)  
The player does not play animated PNG or  
animated GIF files.  
*9  
*10  
39  
 
About wireless LAN security  
(BDP-S3200/S5200 only)  
Notes About the Discs  
• To keep the disc  
clean, handle the  
disc by its edge. Do  
not touch the  
surface.  
Dust, fingerprints, or scratches on the  
disc may cause it to malfunction.  
• Do not expose the disc to direct  
sunlight or heat sources such as hot air  
ducts, or leave it in a car parked in  
direct sunlight as the temperature may  
rise considerably inside the car.  
• After playing, store the disc in its case.  
• Clean the disc with a  
Since communication via the wireless  
LAN function is established by radio  
waves, the wireless signal may be  
susceptible to interception. To protect  
wireless communication, this player  
supports various security functions. Be  
sure to correctly configure the security  
settings in accordance with your network  
environment.  
No Security  
Although you can easily make settings,  
anyone can intercept wireless  
communication or intrude into your  
wireless network, even without any  
sophisticated tools. Keep in mind that  
there is a risk of unauthorised access or  
interception of data.  
cleaning cloth. Wipe  
the disc from the  
centre out.  
• Do not use solvents  
such as benzine,  
WEP  
thinner, commercially available disc/  
lens cleaners, or anti-static spray  
intended for vinyl LPs.  
• If you have printed the disc’s label, dry  
the label before playing.  
• Do not use the following discs.  
– A lens cleaning disc.  
– A disc that has a non-standard shape  
(e.g., card, heart).  
– A disc with a label or sticker on it.  
– A disc that has cellophane tape or  
sticker adhesive on it.  
• Do not resurface the playing side of a  
disc to remove surface scratches.  
WEP applies security to  
communications to prevent outsiders  
from intercepting communications or  
intruding into your wireless network.  
WEP is a legacy security technology that  
enables older devices, which do not  
support TKIP/AES, to be connected.  
WPA-PSK (TKIP), WPA2-PSK (TKIP)  
TKIP is a security technology developed  
to correct the deficiencies of WEP. TKIP  
assures a higher security level than  
WEP.  
WPA-PSK (AES), WPA2-PSK (AES)  
AES is a security technology that uses an  
advanced security method that is distinct  
from WEP and TKIP.  
AES assures a higher security level than  
WEP or TKIP.  
40  
 
Codenumbersofcontrollable  
TVs  
Language code list  
For details, see [BD/DVD Viewing  
Settings] (page 28).  
The language spellings conform to the  
ISO 639: 1988 (E/F) standard.  
Hold down -TV- [/1 and the TV  
manufacturer’s code using the remote  
buttons for 2 seconds.  
If more than one remote button is listed,  
try entering them one at a time until you  
find the one that works with your TV.  
Code Language  
1027 Afar  
1028 Abkhazian  
1039 Amharic  
1045 Assamese  
1052 Azerbaijani  
1057 Byelorussian  
1060 Bihari  
1066 Bengali  
1070 Breton  
1093 Corsican  
1103 Welsh  
1032 Afrikaans  
1044 Arabic  
1051 Aymara  
1053 Bashkir  
1059 Bulgarian  
1061 Bislama  
1067 Tibetan  
1079 Catalan  
1097 Czech  
1105 Danish  
Manufacturer  
Remote Button  
Sony (Default)  
Colour button  
(red)  
Philips  
Colour button  
(green) / Colour  
button (yellow) /  
RETURN  
1109 German  
1142 Greek  
1130 Bhutani;  
Dzongkha  
Panasonic  
Colour button  
(blue) / Centre  
button (ENTER)  
1144 English  
1149 Spanish  
1151 Basque  
1165 Finnish  
1171 Faroese  
1181 Frisian  
1186 Scots Gaelic 1194 Galician  
1196 Guarani  
1209 Hausa  
1226 Croatian  
1233 Armenian  
1239 Interlingue  
1248 Indonesian  
1254 Italian  
1261 Japanese  
1283 Javanese  
1297 Kazakh  
1145 Esperanto  
1150 Estonian  
1157 Persian  
1166 Fiji  
1174 French  
1183 Irish  
Hitachi  
TOP MENU  
Sharp  
M
Toshiba  
Loewe  
POP UP/MENU  
<
,
m
1203 Gujarati  
1217 Hindi  
Samsung  
LG/Goldstar  
1229 Hungarian  
1235 Interlingua  
1245 Inupiak  
1253 Icelandic  
1257 Hebrew  
1269 Yiddish  
1287 Georgian  
1298 Greenlandic;  
Kalaallisut  
1299 Cambodian; 1300 Kannada  
Khmer  
1301 Korean  
1307 Kurdish  
1313 Latin  
1305 Kashmiri  
1311 Kirghiz  
1326 Lingala  
1327 Laothian; Lao 1332 Lithuanian  
1334 Latvian  
1347 Maori  
1350 Malayalam  
1353 Moldavian  
1345 Malagasy  
1349 Macedonian  
1352 Mongolian  
1356 Marathi  
41  
 
 
Code Language  
1357 Malay  
Parental control/area code  
1358 Malese;  
Maltese  
1363 Burmese  
1369 Nepali  
1379 Norwegian  
1403 Oromo  
1417 Punjabi;  
Panjabi  
1435 Pashto;  
Pushto  
1365 Nauru  
1376 Dutch  
1393 Occitan  
1408 Oriya  
1428 Polish  
For details, see [Parental Control Area  
Code] (page 29).  
Code Area  
2044 Argentina  
2046 Austria  
2070 Brazil  
2047 Australia  
2057 Belgium  
2090 Chile  
1436 Portuguese  
2092 China  
2115 Denmark  
2174 France  
2200 Greece  
2248 India  
2239 Ireland  
2276 Japan  
2333 Luxembourg 2363 Malaysia  
2362 Mexico 2376 Netherlands  
2390 New Zealand 2379 Norway  
2093 Colombia  
2165 Finland  
2109 Germany  
2219 Hong Kong  
2238 Indonesia  
2254 Italy  
1463 Quechua  
1481 Rhaeto-  
Romance  
1482 Kirundi; Rundi 1483 Romanian  
1489 Russian  
1495 Sanskrit  
1501 Sangho;  
Sango  
1503 Singhalese; 1505 Slovak  
Sinhalese  
1506 Slovenian  
1508 Shona  
1511 Albanian  
1491 Kinyarwanda  
1498 Sindhi  
1502 Serbo-  
Croatian  
2304 Korea  
1507 Samoan  
1509 Somali  
1512 Serbian  
2427 Pakistan  
2428 Poland  
2489 Russia  
2149 Spain  
2424 Philippines  
2436 Portugal  
2501 Singapore  
2499 Sweden  
1513 Siswati; Swati 1514 Sesotho;  
Sotho  
southern  
2086 Switzerland 2543 Taiwan  
1515 Sundanese  
1517 Swahili  
1525 Telugu  
1528 Thai  
1516 Swedish  
1521 Tamil  
1527 Tajik  
1529 Tigrinya  
1532 Tagalog  
2528 Thailand  
2184 United  
Kingdom  
2586 Vietnam  
1531 Turkmen  
1534 Setswana;  
Tswana  
1535 Tonga; Tonga  
islands  
1538 Turkish  
1540 Tatar  
1539 Tsonga  
1543 Twi  
1557 Ukrainian  
1572 Uzbek  
1587 Volapük  
1632 Xhosa  
1684 Chinese  
1703 Not specified  
1564 Urdu  
1581 Vietnamese  
1613 Wolof  
1665 Yoruba  
1697 Zulu  
42  
 
 
The software of this player may be updated in the future. For information about any  
available updates and the latest Operating Instructions, please visit the following  
website:  
4-476-203-91(1)  
© 2014 Sony Corporation  
 

Sharp Calculator EL 520V User Manual
Sharp Cash Register XE A213 User Manual
Sharp CD Player IM DR420H User Manual
Sharp Stereo System MD X60H User Manual
Silvercrest Fan STV 45 A1 User Manual
Snell Acoustics Speaker AMC 560 User Manual
Sony Flat Panel Television 4 127 735 111 User Manual
Sony Laptop VPCF120FDB User Manual
SpectraLink Cordless Telephone JPI300 User Manual
StarTechcom Network Cables PCMACLINK2 User Manual