Sony Bluetooth Headset 1275 3008 User Manual

User guide  
®
Bluetooth Music Receiver  
BM10  
 
Accessory overview  
1. Stereo  
Insert stereo cables to connect the device to a stereo.  
connectors (Left/  
Right)  
2. Micro USB port  
Insert charger cable to power on the device.  
3. Notification light Flashing blue light indicates the device is visible to other  
Bluetooth® devices or is being reconnected.  
Stable blue light indicates the device is connected to your  
phone.  
Stable white light indicates the device is ready for  
reconnection.  
4. Pair/Connect  
button  
Long press to enter pairing mode and make the device visible  
to other Bluetooth® devices.  
Press to disconnect from the currently connected phone.  
Press to reconnect to the most recently connected phone.  
3
This is an Internet version of this publication. © Print only for private use.  
 
Basics  
To power on the music receiver  
1
2
Plug one end of the charger cable into the charger.  
Plug the other end of the cable into the Micro USB port of the music receiver.  
A white notification light illuminates briefly to indicate that the device is  
powered on.  
The music receiver only works when connected to a power source.  
To connect the music receiver to a stereo  
1
2
Plug one end of the stereo cable into the relevant stereo connectors (Left/  
Right) on your music receiver.  
Plug the other end of the cable into the stereo.  
4
This is an Internet version of this publication. © Print only for private use.  
 
Pairing and connecting  
Before you can use your music receiver to play music through a stereo system, you  
need to first pair the music receiver with your phone. You can pair the devices  
manually, or you can use NFC. Once paired, the music receiver automatically  
establishes a connection to your phone.  
The internal memory of your music receiver can save and remember up to eight  
pairings with other phones at any given time.  
To manually pair the music receiver with your phone  
1
2
Make sure your phone has the Bluetooth® function turned on.  
Music Receiver: If you are pairing the music receiver with a phone for the first  
time, the music receiver enters pairing mode automatically. If not, press and  
hold the Pair/Connect button until the notification light flashes blue.  
Phone: Scan for Bluetooth® devices, then select BM10 in the available  
devices list.  
3
4
Follow the pairing instructions that appear on your phone. If a PIN code is  
required, enter "0000".  
To pair the music receiver with a phone using NFC  
1
2
Make sure that the phone has the NFC function turned on and that the screen  
is active and unlocked.  
Place the phone over the music receiver so that the NFC detection area of  
each device touches the other.  
5
This is an Internet version of this publication. © Print only for private use.  
 
Disconnecting and reconnecting  
There are three ways to disconnect your phone from or reconnect it with the music  
receiver:  
Deselect or select BM10 in the list of paired Bluetooth® devices in your phone.  
Place your phone over the music receiver so that the NFC detection area of each  
device touches the other.  
Press the Pair/Connect button.  
6
This is an Internet version of this publication. © Print only for private use.  
 
Smart Connect  
You can use the Smart Connect application on your phone to automatically stream  
music to the music receiver when the phone is connected with the receiver.  
Setting up such an action in the Smart Connect application is known as creating an  
event. For example, you could create an event that sets the music player to stream  
music to the music receiver every day at a certain time, for example, while you are  
taking a tea or coffee break.  
Before you can create music events in Smart Connect, you must install the Smart  
Connect application on your phone.  
To install the Smart Connect application on your phone  
1
2
From the main application menu of your phone, find and tap Play Store to  
open the Google Play™ application.  
Tap the search icon at the top right corner and enter "Smart Connect" in the  
search field, then tap the search icon again.  
Tap Smart Connect.  
Tap Download, then tap Accept & Download.  
Follow the instructions that appear on the screen of your phone to install the  
application.  
3
4
5
To create a Smart Connect event  
1
Start the Smart Connection application. If you are opening Smart Connect for  
the first time, tap OK to close the introduction screen.  
2
3
4
5
6
Tap  
.
Give the event a name, then tap Create.  
Under WHEN, add either the accessory or a time interval, or both.  
Under DO THIS, add what you want to happen in your phone.  
Under AT THE END, add what you want to happen when you disconnect the  
accessory or when the time interval comes to an end. If both these conditions  
are set, the actions start either when you disconnect the accessory, or when  
the time interval comes to an end.  
7
To save the event, press  
.
To add a Bluetooth® accessory, you have to first pair it with your phone.  
7
This is an Internet version of this publication. © Print only for private use.  
 
Legal information  
Music Receiver BM10  
This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any  
warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of  
current information, or improvements to programs and/or equipment, may be made by Sony Mobile  
Communications AB at any time and without notice. Such changes will, however, be incorporated into new  
editions of this User guide.  
All rights reserved.  
©Sony Mobile Communications AB, 2013  
Publication number: 1277-5974.1  
All product and company names mentioned herein are the trademarks or registered trademarks of their  
respective owners. Any rights not expressly granted herein are reserved. All other trademarks are property of  
their respective owners.  
Visit www.sonymobile.com for more information.  
All illustrations are for illustration only and may not accurately depict the actual accessory.  
Declaration of Conformity for BM10  
We, Sony Mobile Communications AB of  
Nya Vattentornet  
SE-221 88 Lund, Sweden  
declare under our sole responsibility that our product  
Sony type RD-0030  
and in combination with our accessories, to which this declaration relates is in  
conformity with the appropriate standards EN 300 328:V1.7.1, EN 301 489-3:V1.4.1,  
EN 301 489-7:V1.3.1, EN 301 489-17:V2.1.1 and EN 60 950-1:2006  
+A11:2009+A1:2010 following the provisions of, Radio Equipment and  
Telecommunication Terminal Equipment directive 1999/5/EC.  
Lund, July 2013  
Anders Grynge  
Director, Head of Global Type Approval  
We fulfil the requirements of the R&TTE Directive (1999/5/EC).  
FCC Statement  
This device complies with Part 15 of the FCC rules. Operation is subject to the following two  
conditions: (1) This device may not cause harmful interference, and (2) This device must  
accept any interference received, including interference that may cause undesired operation.  
Any change or modification not expressly approved by Sony may void the user's authority to operate the  
equipment.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference will not occur in a particular  
installation.  
If this equipment does cause harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of  
the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
8
This is an Internet version of this publication. © Print only for private use.  
 
Industry Canada Statement  
This device complies with RSS-210 of Industry Canada.  
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this  
device must accept any interference, including interference that may cause undesired operation of the device.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
Avis d’industrie Canada  
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de  
licence.  
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et,  
and (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est  
susceptible d'en compromettre le fonctionnement.  
9
This is an Internet version of this publication. © Print only for private use.  
 

Sennheiser Microphone MKH 8000 Series User Manual
Shiro Telephone SD2100 User Manual
Sonic Impact Technologies MP3 Player Video 55 User Manual
Sony Home Theater System BDV EF1100 User Manual
Sony MP3 Player Accessories TDM iP1 User Manual
Sony MP3 Player CFD ZW700 User Manual
Sony Satellite TV System DST HD500 User Manual
Sony Speaker SS MB100H User Manual
SoundCraft Music Mixer 328 XD User Manual
Swann Security Camera Imitation Dome Camera User Manual