Sony DVD Player DVP FX930 User Manual

4-126-487-11(1)  
Portable  
CD/DVD Player  
US  
Operating Instructions  
ES  
Manual de instrucciones  
DVP-FX930  
© 2009 Sony Corporation  
 
plug does not fit into your  
outlet, consult an  
RECYCLING LITHIUM-  
ION BATTERIES  
Lithium-Ion  
batteries are  
recyclable.  
You can help  
preserve our  
environment by  
returning your used rechargeable  
batteries to the collection and  
recycling location nearest you.  
For more information regarding  
recycling of rechargeable  
batteries, call toll free  
1-800-822-8837, or visit  
Caution: Do not handle damaged  
or leaking Lithium-Ion batteries.  
Copyrights and  
trademarks  
electrician for replacement  
of the obsolete outlet.  
10) Protect the power cord  
from being walked on or  
pinched particularly at  
plugs, convenience  
• This product incorporates  
copyright protection  
technology that is protected by  
U.S. patents and other  
intellectual property rights.  
Use of this copyright  
protection technology must be  
authorized by Macrovision,  
and is intended for home and  
other limited viewing uses only  
unless otherwise authorized by  
Macrovision. Reverse  
receptacles, and the point  
where they exit from the  
apparatus.  
11) Only use attachments/  
accessories specified by  
the manufacturer.  
engineering or disassembly is  
prohibited.  
12) Use only with the cart,  
stand, tripod, bracket, or  
table specified by the  
manufacturer, or sold with  
the apparatus. When a cart  
is used, use caution when  
moving the cart/apparatus  
combination to avoid  
injury from tip-over.  
• Manufactured under license  
from Dolby Laboratories.  
Dolby and the double-D  
symbol are trademarks of  
Dolby Laboratories.  
• “DVD+RW,” “DVD-RW,”  
“DVD+R,” “DVD+R DL,”  
“DVD-R,” “DVD VIDEO,”  
and “CD” logos are  
For the State of California,  
USA only  
Perchlorate Material – special  
handling may apply, See  
hazardouswaste/perchlorate  
Perchlorate Material: Lithium  
battery contains perchlorate.  
trademarks.  
About this manual  
IMPORTANT NOTICE  
• In this manual, “disc” is used as  
a general reference for the  
DVDs or CDs unless otherwise  
specified by the text or  
illustrations.  
Caution: This player is capable  
of holding a still video image  
or on-screen display image on  
your television screen  
13) Unplug this apparatus  
during lightning storms or  
when unused for long  
periods of time.  
14) Refer all servicing to  
qualified service  
indefinitely. If you leave the  
still video image or on-screen  
display image displayed on  
your TV for an extended period  
of time you risk permanent  
damage to your television  
screen. Plasma display panel  
televisions and projection  
televisions are susceptible to  
this.  
• Icons, such as  
, listed at  
the top of each explanation  
indicate what kind of media  
can be used with the function  
being explained.  
Media” (page 27).  
• NEED-to-know information  
(to prevent incorrect operation)  
is listed under the b icon.  
NICE-to-know information  
(tips and other useful  
information) is listed under the  
z icon.  
personnel. Servicing is  
required when the  
apparatus has been  
damaged in any way, such  
as power-supply cord or  
plug is damaged, liquid has  
been spilled or objects  
have fallen into the  
apparatus, the apparatus  
has been exposed to rain or  
moisture, does not operate  
normally, or has been  
dropped.  
If you have any questions or  
problems concerning your  
player, please consult your  
nearest Sony dealer.  
3
 
Table of Contents  
4
 
The VOL+ and N (play) buttons have a  
tactile dot. Use the tactile dot as a reference  
when operating the player.  
Guide to Parts and  
Controls  
A LCD panel (page 8)  
For more information, see the pages  
indicated in parentheses.  
B VOL (sound volume) +/–  
Operate with a single touch of + or –.  
You can also adjust the volume by  
sliding your finger along the touch  
slider. Sliding toward + from center  
increases volume; sliding toward –  
from center decreases volume. (The  
same operation in “LCD Mode” can be  
used to adjust the picture quality level.  
See page 17.)  
Player  
C N (play) (page 13)  
VOL  
DIS
MENU  
RETURN  
OPTIONS  
Starts or re-starts playback.  
X (pause) (page 13)  
Pauses or re-starts playback.  
x (stop) (page 13)  
Stops playback.  
OPEN  
PUSH LOSE  
. (previous)  
Skips to the beginning of the current  
chapter/track/scene.  
POWER CHARGE  
To go to the beginning of the previous  
chapter/track/scene, press twice.  
> (next)  
Skips to the next chapter/track/scene.  
POWER  
OFF ON  
HOLD  
PHONES  
AUDIO  
VIDEO  
DC IN  
9.5V  
IN/  
IN/  
A
B
OUT  
OUT  
Buttons B C D and E are the same in  
function as those on the remote.  
Buttons B C D and E (but not C/X/x/  
c/ENTER) can be operated with a single  
touch.  
,continued  
5
 
   
D DISPLAY  
F
(remote sensor)  
When operating by the remote, point it  
Displays the playback information.  
• When playing a DVD: Displays the  
playback information and changes  
the playback mode. See page 15.  
• When playing a CD: Each time you  
press the button, the time  
at the remote sensor  
.
G Speaker  
H Disc Lid (page 13)  
information switches.  
I OPEN button (page 13)  
E MENU  
Opens the disc lid.  
Displays the menu or changes the  
playback mode.  
• When playing a DVD: Displays the  
menu.  
J PUSH CLOSE (page 13)  
Closes the disc lid.  
• When playing a CD: Each time you  
press the button, switches Repeat  
Play, Random Play, and Play.  
• When playing a JPEG file: Displays  
the list of thumbnails and plays a  
slideshow. See page 16.  
K POWER indicator (page 13)  
L CHARGE indicator (page 10)  
M POWER switch (page 13)  
Turns the player on or off.  
RETURN  
Returns to the previous display.  
N HOLD switch  
C/X/x/c  
Moves the highlight to select a  
displayed item.  
To avoid accidental button operation  
of the player, set the HOLD switch to  
the direction of the arrow.  
All the buttons on the player are  
locked, while the buttons on the  
remote remain operable.  
• When playing a DVD or CD: C/c on  
the player works as the same as m/  
M on the remote.  
ENTER  
O PHONES (headphone) jack A, B  
P AUDIO IN/OUT jack (page 12)  
Q VIDEO IN/OUT jack (page 12)  
R DC IN 9.5V jack (page 10, 11)  
Enters the selected item.  
• When playing a DVD or CD:  
ENTER on the player works as the  
same as N.  
OPTIONS  
Displays the menu for adjusting the  
LCD screen (page 17) and using the  
setup display (page 19).  
Connect the AC power adaptor or car  
battery adaptor.  
6
 
       
S INPUT button (page 12)  
T Number buttons  
When connected to a TV or other  
equipment, each time you press the  
button, the LCD screen image  
switches as follows:  
• Playing an inserted disc: When  
turning on the player, the default is  
applied.  
Enters the title/chapter numbers, etc.  
• When playing a DVD VIDEO or  
CD: Search directly by entering the  
title/chapter/track number using the  
number buttons, and press ENTER.  
To switch a title or chapter, press C/  
c.  
• Line In: When inputting a playback  
signal from connected A/V  
equipment.  
CLEAR button  
Clears the entry field.  
U TOP MENU button  
Remote  
Displays the menu or changes the  
playback mode.  
• When playing a DVD VIDEO:  
Displays the top menu.  
1
4
7
2
5
8
0
3
6
9
• When playing a DVD VR: Switches  
between “Original” and “Play List”  
on the disc created Playlist. During  
playback, you cannot switch. Press  
x twice, and press TOP MENU.  
V m/M (scan/slow) buttons  
Fast reverses/ fast forwards when  
pressed during playback. Press  
repeatedly to change the speed.  
• When playing a DVD: Slow  
reverses/ slow forwards when  
pressed during pause. Press  
repeatedly to change the speed.  
Buttons B C D and E are the same in  
function as those on the player.  
W
ADVANCE button  
Briefly fast forwards the current scene  
(DVD only).  
The number 5, N and AUDIO buttons  
have a tactile dot. Use the tactile dot as a  
reference when operating the player.  
X AUDIO button  
Changes the audio signal.  
• When playing a DVD VIDEO: Each  
time you press the button, the  
language of the sound track  
switches. Depending on the disc, the  
choice of language varies.  
• When playing a DVD VR: Each time  
you press the button, the type of  
,continued  
7
 
     
sound tracks recorded on a disc  
switches between main, sub and  
main/sub sound.  
• When playing a CD: Each time you  
press the button, the mode switches  
between stereo and monaural (left/  
right).  
Rotating and Folding  
Down the LCD Panel  
Open the LCD panel to the vertical  
position, then slowly rotate it 180 degrees  
in the direction indicated by the arrow  
(clockwise).  
SUBTITLE button  
Changes the subtitle. Each time you  
press the button, the subtitle switches.  
Depending on the disc, the choice of  
language varies. (DVD only)  
ANGLE button  
Changes the angle. When “  
(Angle Mark) appears, you can change  
angles. Depending on the disc, you  
may not be able to change the angle.  
(DVD VIDEO only)  
After rotating the LCD panel 180 degrees  
clockwise, push the LCD panel down onto  
the main body of the player. In this  
position the panel is facing up.  
To return the LCD panel to its original  
position  
Open the LCD panel to the vertical  
position and rotate the LCD panel counter-  
clockwise slowly.  
b
• Do not rotate the LCD panel over 180 degrees.  
In addition, do not rotate in the opposite  
direction. Doing so will break the LCD panel.  
• Return the LCD panel to its original positions  
after use, so the LCD panel will not be  
damaged by sudden shocks or rough treatment.  
• Do not rotate the LCD panel while keeping it  
closed or out of vertical. It may scratch the  
player.  
8
 
     
Charging the Battery  
Pack  
Preparations  
Checking the  
Accessories  
Charge the battery pack (supplied) before  
using the player for the first time, or when  
the battery is depleted.  
Check that you have the following items:  
• Battery pack (NP-FX110) (1)  
• AC power adaptor (1)  
• Car battery adaptor (1)  
• Audio/video cord (mini plug × 2 y  
phono plug × 3) (1)  
1
Attach the battery pack to the  
player.  
Align the battery pack with the lines  
on the bottom of the player.  
Engage the hooks of the battery pack  
into the holes on the bottom of the  
player.  
• Remote (with battery) (1)  
To replace the remote battery  
When the battery becomes depleted,  
operation is not possible. Change the  
battery.  
Battery pack  
1
2
Prepare a new battery (lithium battery  
CR2025).  
Pull out the battery holder (2) while  
pressing the lock lever (1).  
Attachment  
reference marks  
Bottom of the  
player  
3
4
Remove the old battery.  
Slide the battery pack in the direction  
of the arrow until it clicks into place.  
Insert the new battery in the battery  
holder with the 3 side up and then  
push the holder until it clicks.  
CAUTION  
Danger of explosion if battery is incorrectly  
replaced.  
Replace only with the same or equivalent  
type.  
,continued  
9
 
           
To check the battery level  
When the player is stopped, the battery  
indicator is displayed. When the battery is  
2
Connect the AC power adaptor.  
When charging begins, the CHARGE  
indicator lights up in orange.  
empty,  
is displayed or the CHARGE  
INPUT  
indicator flashes. Set the POWER switch  
to “OFF,” connect the AC power adaptor,  
and recharge the battery.  
POWER  
O
F
F
O
N
HOLD  
PHONES  
AUDIO  
IN/  
OUT  
VIDEO  
IN/  
OUT  
DC IN  
9.5V  
A
B
To a wall  
outlet  
DC IN  
9.5V  
Full  
Empty  
To remove the battery pack  
Push the release knob and slide the battery  
pack in the direction of the arrow.  
AC power Adaptor  
(supplied)  
When charging ends, the CHARGE  
indicator lights off.  
Disconnect the AC power adaptor.  
Release knob  
z
If the POWER indicator lights up instead of the  
CHARGE indicator, the POWER switch is set to  
“ON.” Set the POWER switch to “OFF,” and  
make sure that the CHARGE indicator lights up.  
Charging time and playing time  
Charging time: approx. 6 hours  
Playing time: approx. 6 hours  
Times indicated are under the following  
conditions:  
– Moderate temperature (20°C (68°F))  
– Headphone use  
– Backlight set to minimum  
Depending on the ambient temperature or  
battery pack condition, charging time may be  
longer, or playing time may be reduced.  
10  
 
     
After using the player in a car  
Using the Car Battery  
Adaptor  
1
2
3
Turn off the player.  
Disconnect the car battery adaptor.  
Turn off the engine.  
The car battery adaptor (supplied) is for a  
12V car battery, negative earth (do not use  
it with a 24V car battery, positive earth).  
b
• Do not disconnect the car battery adaptor or  
turn off the car engine before you turn off the  
player. Doing so may damage the player.  
• Disconnect the car battery adaptor after use. If  
it is left connected, the car battery may become  
depleted.  
1
2
Start the engine.  
Connect the car battery adaptor.  
• Do not leave the player or accessories in the  
car.  
INPUT  
POWER  
O
F
F
O
N
HOLD  
PHONES  
AUDIO  
IN/  
OUT  
VIDEO  
IN/  
OUT  
DC IN  
9.5V  
A
B
DC IN  
9.5V  
To cigarette  
lighter socket  
Car battery adaptor (supplied)  
3
Turn on the player.  
b
• The driver should not connect or disconnect  
the car battery adaptor while driving.  
• Arrange the cord so as not to interfere with the  
driver. Also, do not place the LCD panel where  
the driver can watch.  
• Clean the cigarette lighter socket. If it is dirty,  
it may cause contact failure or malfunction.  
• Use the car battery adaptor with the car engine  
running. If it is used with the car engine off, the  
car battery may become depleted.  
11  
 
   
z
• When you play back a disc after enjoying  
images by “Line In,” press INPUT. See page 7.  
• The player can connect to an AV amplifier in  
the same way as a TV. Although connecting is  
the same as a TV, the yellow plug of the audio/  
video cord is not used.  
Connecting to Other  
Equipment  
By connecting the player to your TV or  
other equipment, you can increase your  
viewing options.  
Enjoying optional connections  
b
1 Connect the player to your video  
player or camcorder using the  
audio/video cord (supplied).  
• Refer to the instructions supplied with the  
equipment to be connected.  
• Before connecting, turn off the player and the  
equipment to be connected, then unplug from  
their wall sockets.  
INPUT  
Enjoying images on a  
connected TV  
INPUT  
POWER  
O
F
F
O
N
HOLD  
PHONES  
AUDIO  
IN/  
OUT  
VIDEO  
IN/  
OUT  
DC IN  
9.5V  
A
B
1 Connect the player to your TV or  
monitor using the audio/video cord  
(supplied).  
AUDIO  
IN/  
OUT  
VIDEO  
IN/  
OUT  
To AUDIO/  
VIDEO output  
jacks of a  
INPUT  
video player or  
camcorder  
INPUT  
POWER  
O
F
F
O
N
HOLD  
PHONES  
AUDIO  
IN/  
OUT  
VIDEO  
IN/  
OUT  
DC IN  
9.5V  
A
B
Audio/video cord  
(supplied)  
AUDIO  
IN/  
OUT  
VIDEO  
IN/  
OUT  
To AUDIO/  
VIDEO input  
jacks of a TV or  
monitor  
2 Press INPUT to select “Line In.”  
Audio/video cord  
(supplied)  
12  
 
   
4
Insert the disc to be played.  
Place with the playback side down and  
push gently until it clicks.  
Playback  
Playing Discs  
Depending on the disc, some operations  
may be different or restricted. Refer to the  
operating instructions supplied with the  
disc.  
Connect the AC power adaptor or attach  
the battery pack.  
Playback side facing down  
x
X
5
6
Push the PUSH CLOSE on the  
disc lid to shut the disc lid.  
N
VOL  
DISPLAY  
MENU  
RETURN  
OPTIONS  
Press N.  
The player starts playback.  
Depending on the disc, a menu may  
appear. Press C/X/x/c to select the  
item, and press ENTER.  
P
O
W
E
R
C
H
A
R
G
E
P
U
S
H
C
L
O
S
E
OPEN  
P
O
W
E
R
C
H
A
N
R
O
G
E
F
F
O
R
E
W
O
P
To stop playback  
Press x.  
PUSH CLOSE OPEN POWER  
To pause playback  
Press X.  
1
2
Open the LCD panel.  
z
Slide the POWER switch to  
“ON.”  
When you play back a disc after enjoying images  
by “Line In,” press INPUT. See page 7.  
The player turns on and the POWER  
indicator lights up in green.  
b
• Discs created on DVD recorders must be  
correctly finalized to play on the player. For  
more information about finalizing, refer to the  
operating instructions supplied with the DVD  
recorder.  
3
Press OPEN to open the disc lid.  
• The disc may be still spinning when the disc lid  
is opened. Wait until the spinning stops before  
removing the disc.  
,continued  
13  
 
     
To resume playback from the point  
where you stopped the disc (Resume  
Play)  
About various playback operations  
To  
Operation  
When you press N again after you stop  
playback, the player starts playback from  
the point when you pressed x.  
Change the LCD Press OPTIONS to  
picture size  
select “LCD Mode”  
Display the DVD Press MENU (page 6)  
z
menu  
or TOP MENU  
(page 7).  
• To play from the beginning of the disc, press  
x twice, and press N.  
• When turning power on again after power off,  
resume play starts automatically.  
Check the DVD Press DISPLAY  
playback  
information  
b
Play DVDs*  
repeatedly  
(Repeat Play)  
Press DISPLAY to  
select “Repeat”  
• Depending on the stop point, Resume play  
may not start from exactly the same point.  
• The resume point is cleared when:  
– you turn off the player (including standby  
mode) while playing a DVD (VR mode).  
– you open the disc lid.  
– you press INPUT.  
– you disconnect the adaptor or remove the  
battery pack before turning off the player.  
Play DVDs in  
fast reverse or  
fast forward  
(Scan Play)  
Press C/crepeatedly on  
the player to select the  
speed (page 6).  
Switch between Press TOP MENU  
original and  
Playlist in DVD  
(VR mode)  
repeatedly (page 7).  
Notes on the screen saver  
• A screen saver image appears when you  
leave the player in pause or stop mode  
without operation for more than 15  
minutes. The image disappears when you  
press N. For the setup of “Screen  
Saver,” see page 20.  
• The player goes to standby, 15 minutes  
after starting the screen saver function.  
Press N to come out of standby mode.  
Change the CD  
playback  
information  
Press DISPLAY  
repeatedly (page 6).  
Play CDs  
repeatedly  
(Repeat Play)  
Press MENU  
repeatedly (page 6).  
Play CDs  
randomly  
Press MENU  
repeatedly (page 6).  
(Random Play)  
* DVD VIDEO only  
14  
 
           
pressing ENTER. Enter the desired  
time code by pressing the number  
buttons.  
• C.Time: Time appears while playing  
a chapter. “00:00:00” will appear by  
pressing ENTER. Enter the desired  
time code by pressing the number  
buttons.  
• Repeat: Select “ Chapter,” “  
Title,” “ All,” or “Off” by  
pressing X/x.  
• Time Disp.: “Title Elapsed” is  
displayed. Select “Title Elapsed,”  
“Title Remain,” “Chapter Elapsed,”  
or “Chapter Remain” by pressing X/  
x.  
Using the Playback  
Information Display  
While playing a DVD, you can check the  
current playback information. The  
playback information display also allows  
you to set a title/chapter or change sound/  
subtitle, and so on.  
When entering the numbers, operate the  
number buttons on the remote.  
1 Press DISPLAY while playing a  
DVD.  
The current playback information  
appears.  
Example: When playing a DVD  
VIDEO  
3 Press ENTER.  
Items  
Current playback information*  
To turn off the display  
Press DISPLAY or RETURN.  
Menu  
Title  
02/07  
b
Chapter  
Audio  
03/20  
Depending on the disc, you may not be able to  
set some items.  
02 2CH DOLBY DIGITAL English  
01 English  
Subtitle  
Title Elapsed 00:12:01  
Battery status  
Elapsed or remaining time  
* When a DVD (VR mode) is played, “PL”  
(playlist) or “ORG” (original) is displayed  
next to the title number.  
2 Press X/x to select items and press  
ENTER.  
• Title: Select the title number by  
pressing X/x or number buttons.  
• Chapter: Select the chapter number  
by pressing X/x or number buttons.  
• Audio: Select the sound by pressing  
X/x.  
• Subtitle: Select the subtitle by  
pressing X/x.  
• Angle: Select the angle by pressing  
X/x.  
• T.Time: Time appears while playing  
a title. “00:00:00” will appear by  
15  
 
     
2
Press X/x to select the file, and  
press ENTER.  
Playing MP3 and JPEG  
Files  
Playback starts from the selected file.  
You can play MP3 and JPEG files. For  
details on playable files, see “Playable  
To go to the next or previous file  
Press > or ..  
When you set a DATA media, a list of  
albums appears.  
DATA CDs recorded in KODAK Picture  
CD format automatically start playing  
when inserted.  
To stop playback  
Press x.  
The display will return to the list of files.  
To pause playback (MP3 only)  
Press X.  
x
To restart playback, press X again.  
X
N
MENU  
b
C/X/x/c  
ENTER  
Depending on the file, playback may take time to  
start or may not be able to start. For details on  
playable files, see “Playable Media” (page 27).  
VOL  
DISPLAY  
MENU  
RETURN  
OPTIONS  
./>  
P
O
W
E
R
C
H
A
R
G
E
Selecting a JPEG file  
1
Press X/x to select the album,  
and press ENTER.  
The list of files in the album appears.  
Example: The list of MP3 files  
To rotate a JPEG image  
Press C/X/x/c while viewing the image  
file. Rotate every file.  
c: Rotates the image 90 degrees  
clockwise.  
Dir:001  
MY BEST  
. .  
C: Rotates the image 90 degrees counter  
clockwise.  
X: Reverses the image vertically (up and  
down).  
01 Stardust  
02 Fire  
03 Wing  
x: Reverses the image horizontally (left  
and right).  
• To go to the next or previous page,  
press > or ..  
• To return to the list of albums, press  
To display the list of thumbnails  
Press MENU when an image file is  
displayed.  
X/x to select  
and press ENTER.  
The image files in the album appear in 12  
sub-screens with the displayed file in the  
lead.  
16  
 
         
1
5
9
2
3
7
4
Adjusting the Picture  
Size and Quality  
6
8
10  
11  
12  
Slide Show  
Prev  
Next  
You can adjust the picture displayed on the  
LCD screen.  
• To go to the previous or next list of  
thumbnails, select “bPrev” or  
“NextB” at the bottom of the screen,  
and press ENTER.  
VOL +/–  
RETURN  
• To exit the list of thumbnails, press  
MENU.  
C/X/x/c  
ENTER  
OPTIONS  
VOL  
DISPLAY  
MENU  
REURN  
OPTIN
Playing a Slide Show  
P
O
W
E
R
C
H
A
R
G
E
1 While displaying the image file you  
want to start a slideshow, press  
MENU.  
1
2
Press OPTIONS.  
The menu display appears.  
The list of thumbnails appears.  
Press X/x to select “LCD  
Mode” and press ENTER.  
The “LCD Mode” display appears.  
2 Press C/X/x/c to select “Slide  
Show” at the bottom of the screen,  
and press ENTER.  
A slideshow starts from the displayed  
file.  
items  
LCD Mode  
LCD Aspect  
Backlight  
Contrast  
Hue  
Full  
10  
10  
0
To stop slideshow  
Press x to return to the list of files.  
Press MENU to return to the list of  
thumbnails.  
Color  
10  
Default  
ENTER  
RETURN  
Cancel:  
Select:  
To pause slideshow  
Press X.  
3
Press X/x to select items and  
press ENTER.  
• LCD Aspect: Change the picture size.  
Select “Normal” or “Full” by pressing  
1
X
/x  
* .  
• Backlight: Adjust the brightness by  
2
pressing C/c or VOL +/–* .  
,continued  
17  
 
         
• Contrast: Adjust the difference  
between light and dark areas by  
2
pressing C  
/
c or VOL +/–* .  
• Hue: Adjust the red and green color  
balance by pressing C/c or VOL +/–  
2
* .  
• Color: Adjust the richness of colors  
2
by pressing C  
/
c or VOL +/–* .  
• Default: Return all settings to the  
factory defaults.  
4
Press ENTER.  
1
* In “Normal,” pictures are displayed in their  
original configuration, retaining the aspect  
ratio. 4:3 pictures are displayed with black  
bands on both sides of the screen. 4:3 letter  
box pictures are displayed with bands on all  
sides of the screen.  
In “Full,” pictures are adjusted to fill the  
entire screen. 16:9 pictures are displayed in  
their original configuration. (Black band  
recorded in a 16:9 picture cannot be erased.)  
4:3 pictures appear stretched.  
2
* Operate with a single touch of + or –. You can  
also adjust the level by sliding your finger  
along the touch slider For VOL +/–, see  
page 5.  
To turn off the menu display  
Press OPTIONS or RETURN twice.  
b
Depending on the disc, the screen size you can  
select differs.  
18  
 
: General Setup (page 19)  
Makes the player-related settings.  
: Audio Setup (page 20)  
Makes the audio settings according to  
playback conditions.  
: Language Setup (page 20)  
Makes the language settings for the  
on-screen display or sound track.  
: Parental Control (page 21)  
Sets the parental control limit.  
Settings and Adjustments  
Using the Setup Display  
By using the setup display, you can make  
various settings to items such as picture  
and sound.  
Some discs have stored playback settings,  
which take priority.  
4
Select and adjust each of the  
following items by pressing X/x  
and ENTER.  
RETURN  
x
C/X/x/c  
ENTER  
OPTIONS  
VOL  
DISPLAY  
MENU  
RETURN  
OPTIONS  
To turn off the setup display  
Press OPTIONS or RETURN twice.  
P
O
W
E
R
C
H
A
R
G
E
General Setup  
The default settings are underlined.  
1
Press OPTIONS when the player  
is in stop mode.  
The menu display appears.  
During Resume Play, you cannot use  
the setup display. Press x twice to  
clear Resume Play, and press  
OPTIONS.  
TV Display (DVD only)  
Selects the aspect ratio of the connected  
TV.  
4:3  
Pan Scan a 4:3 screen TV.  
Automatically displays a  
Select this when you connect  
2
Press X/x to select “Setup,”  
and press ENTER.  
wide picture on the entire  
screen and cuts off the  
portions that do not fit.  
The setup display appears.  
4:3  
Select this when you connect  
setup category  
items  
Letter Box a 4:3 screen TV. Displays a  
wide picture with bands on  
the upper and lower portions  
of the screen.  
General Setup  
TV Display  
16 : 9  
On  
Angle Mark  
Screen Saver  
Default  
On  
16:9  
Select this when you connect  
a wide-screen TV or a TV  
with a wide mode function.  
ENTER  
RETURN  
Cancel:  
Select:  
3
Press X/x to select the setup  
category and press ENTER.  
,continued  
19  
 
         
4:3 Pan Scan  
4:3 Letter Box  
16:9  
Audio Setup  
The default setting is underlined.  
Audio DRC (Dynamic Range Control)  
(DVD only)  
Makes the sound clear when the volume is  
turned down when playing a DVD that  
conforms to “Audio DRC.”  
Standard  
TV Mode  
Standard sound.  
Makes low sounds clear even  
if you turn the volume down.  
Wide Range Gives you the feeling of  
being at a live performance.  
b
Depending on the disc, “4:3 Letter Box” may be  
selected automatically instead of “4:3 Pan Scan”  
or vice versa.  
Language Setup  
Angle Mark (DVD VIDEO only)  
Displays the angle mark when you can change  
the viewing angles during playback of DVDs  
recorded with multi-angles.  
OSD (On-Screen Display)  
Switches the display language on the  
screen.  
Disc Menu (DVD VIDEO only)  
On  
Off  
Display the angle mark.  
Hide the angle mark.  
Switches the language for the disc’s menu.  
When you select “Original,” the language  
given priority in the disc is selected.  
Screen Saver  
Subtitle (DVD VIDEO only)  
Switches the subtitle language.  
When you select “Off,” no subtitle is  
displayed.  
The screen saver image appears when you  
leave the player in pause or stop mode for  
15 minutes. The screen saver will help  
prevent your display equipment from  
becoming damaged (ghosting). Press N  
to turn off the screen saver.  
Audio (DVD VIDEO only)  
Switches the language of the sound track.  
When you select “Original,” the language  
given priority in the disc is selected.  
On  
Activates the screen saver  
function.  
Off  
Deactivates the screen saver  
function.  
b
If you select a language in “Disc Menu,”  
“Subtitle,” or “Audio” that is not recorded on the  
disc, one of the recorded languages will be  
automatically selected.  
Default  
Each function returns to its original factory  
settings. Note that all of your settings will  
be lost.  
20  
 
                       
Parental Control (DVD VIDEO only)  
Set the limitation level. The lower the  
value, the stricter the limitation.  
To set the parental control, you need to set  
the password first.  
Parental Control  
You can limit playback of a DVD that has  
the parental control function.  
When you operate this setting, use the  
remote.  
To set the parental control (limited  
playback)  
Password (DVD VIDEO only)  
Enter or change a password. Set the  
password for the parental control function.  
Enter your 4-digit password using the  
number buttons on the remote.  
1
Press X/x to select “Parental Control,”  
and press ENTER.  
2
Press X/x to select the limitation level,  
and press ENTER. The lower the  
value, the stricter the limitation.  
The display for entering the password  
appears.  
To change the password  
1
Press X/x to select “Password,” and  
press ENTER.  
Parental Control  
2
Check “Change” is selected and press  
ENTER.  
Password  
The display for entering the password  
appears.  
Parental Control  
OK  
Old Password  
ENTER  
Enter password, then press  
.
New Password  
Verify Password  
3
Enter your password, and press  
ENTER.  
OK  
ENTER  
Enter password, then press  
.
To play a disc for which Parental  
Control is set  
Insert the disc and press N, the display  
for entering your password appears. Enter  
your password using the number buttons  
on the remote, and press ENTER.  
3
Enter your current password in “Old  
Password,” your new password in  
“New Password” and “Verify  
Password,” and press ENTER.  
If you make a mistake entering your  
password  
Press CLEAR, or press C to return one by  
one before pressing ENTER in step 3, and  
re-enter the password.  
b
• When you play discs which do not have the  
Parental Control function, playback cannot be  
limited on the player.  
• Depending on the disc, you may be asked to  
change the parental control level while playing  
the disc. In this case, enter your password, then  
change the level. If the Resume Play mode is  
canceled, the level returns to the previous  
level.  
If you forget your password  
Enter “1369” in “Old Password,” and enter your  
new password in “New Password” and “Verify  
Password.”  
21  
 
     
Sound  
Additional Information  
There is no sound.  
, The player is in pause mode or in slow  
play mode.  
, The player is in fast forward or fast  
reverse mode.  
Troubleshooting  
If you experience any of the following  
difficulties while using the player, use this  
troubleshooting guide to help remedy the  
problem before requesting repairs. Should  
any problem persist, consult your nearest  
Sony dealer.  
The sound volume is low.  
, The sound volume is low on some  
DVDs. The sound volume may improve  
if you set “Audio DRC” in “Audio  
Setup” to “TV Mode” (page 20).  
Power  
Operation  
The power is not turned on.  
, Check that the AC power adaptor is  
connected securely (page 9).  
, Check that the battery pack is attached  
securely (page 9).  
Nothing happens when buttons are  
pressed.  
,
The HOLD switch is set in the direction of  
the arrow (page 6).  
, Check that the battery pack is sufficiently  
The disc does not play.  
, If the disc is turned over, a “No Disc” or  
“Cannot play this disc.” message  
appears. Insert the disc with the playback  
side facing down (page 13).  
, The disc is not set until it clicks  
The battery pack cannot be charged.  
, You cannot charge the battery pack when  
power is turned on. Set the POWER  
switch to “OFF” (page 9).  
, The disc that cannot be played is  
inserted. Check the region code matches  
the player, and that the disc has been  
finalized (page 27).  
, When “Line In” is displayed, press  
INPUT (page 7).  
Picture  
There is no picture/picture noise  
appears.  
, The disc is dirty or flawed (page 26).  
, The brightness is set at minimum. Set the  
brightness in “LCD Mode” (page 17).  
, When “Line In” is displayed, press  
INPUT (page 7).  
, Parental Control has been set. Change  
the setting (page 21).  
, Moisture has condensed inside the player  
(page 25).  
The black points appear and the red,  
The player starts and stops playing the  
disc automatically.  
, The disc features an auto playback  
function.  
blue, green points remain on the LCD.  
, This is a structural property of the LCD  
and not malfunction.  
, While playing discs with an auto pause  
signal, the player stops playback at the  
auto pause signal.  
22  
 
     
protection only.)  
The disc does not start playing from the  
beginning.  
, Repeat Play or Random Play is selected  
, Resume play has taken effect (page 14).  
, The Playlist of the created disc is  
automatically played. To play original  
titles, press TOP MENU to set  
“Original” (page 7).  
C/c does not work on menu display.  
, Depending on the disc, you may not be  
able to use C/c on the player for the disc  
menu. In this case, use C/c on the  
remote.  
The remote does not function.  
, The battery in the remote is weak.  
, There are obstacles between the remote  
and the player.  
, The distance between the remote and the  
player is too far.  
Playback may take time to start.  
, Playback may take time to start in DVD  
(VR mode).  
, The remote is not pointed at the remote  
sensor on the player.  
, Direct sunlight or strong illumination is  
striking the remote sensor.  
, When the AUDIO/SUBTITLE/ANGLE  
buttons do not work, select and operate it  
from the DVD menu.  
Playback freezes.  
, When the playback layer of a DVD+R  
DL/-R DL disc changes, playback may  
freeze.  
The subtitles disappear.  
, When you change playback speed, or  
skip scenes during playback, the subtitles  
may disappear temporarily.  
The MP3 or JPEG file cannot be played  
, The file format does not conform.  
, The extension does not conform.  
, The file is damaged.  
” or “ ” appears and the player  
does not function according to the  
button.  
, The file size is too large.  
, Depending on the disc, you may not be  
able to perform certain operations. Refer  
to the operating instructions supplied  
with the disc.  
The file or album names are not  
displayed correctly.  
, The player can only display numbers and  
alphabet. Other characters are displayed  
as “ ” (page 28).  
*
“Copyright Lock” appears and the  
screen turns blue when playing a DVD  
(VR mode) disc.  
The player does not operate properly or  
the power does not turn off.  
, When static electricity, etc., causes the  
player to operate abnormally, set the  
POWER switch to “OFF” and disconnect  
the adaptor and remove the battery pack.  
, Images taken from digital broadcasts,  
etc., may contain copy protection signals,  
such as complete copy protection signals,  
single copy signals, and restriction-free  
signals. When images that contain copy  
protection signals are played, a blue  
screen may appear instead of the images.  
It may take a while when looking for  
playable images. (For player that cannot  
play images that contain a copy  
,continued  
23  
 
Hookup  
Precautions  
There is no picture or sound on the  
connected equipment.  
, Re-connect the connecting cord securely  
, The connecting cord is damaged.  
, Check the setting of a connected TV or  
amplifier.  
, When “Line In” is displayed, press  
Road safety  
Do not use the monitor unit and  
headphones while driving, cycling, or  
operating any motorized vehicle. Doing so  
may create a traffic hazard and is illegal in  
some areas. It can also be potentially  
dangerous to play your headsets at high  
volume while walking, especially at  
pedestrian crossings. You should exercise  
extreme caution or discontinue use in  
potentially hazardous situations.  
There is no picture or sound from a  
connected equipment.  
, Press INPUT to select “Line In”  
On safety  
Should any solid object or liquid fall into  
the cabinet, unplug the player and have it  
checked by qualified personnel before  
operating it any further.  
On power sources  
• If you are not going to use the player for  
a long time, be sure to disconnect the  
player from the wall outlet. To  
disconnect the AC power adaptor, grasp  
the plug itself; never pull the cord.  
• Do not touch the AC power adaptor with  
wet hands. Doing so may cause shock  
hazard.  
• Use a commercially available AC plug  
adaptor, if necessary, depending on the  
design of the wall outlet.  
AC power adaptor  
(supplied)  
Wall  
outlet  
AC plug adaptor  
(not supplied)  
• Do not connect the AC power adaptor to  
a traveler’s electric transformer, which  
may generate heat and cause a  
malfunction.  
24  
 
 
adaptor or the battery pack. Failure to do  
so may cause a malfunction.  
On temperature increases  
Heat may build up inside the player during  
charging or if it is being used for a long  
time. This is not a malfunction.  
On Liquid Crystal Display  
• Although manufactured with high  
precision technology, the LCD may  
occasionally display dots of various  
colors. That is not a malfunction.  
• Do not place or drop any object onto the  
LCD surface. Also, do not apply pressure  
from hands or elbows.  
On placement  
• Do not place the player in a confined  
space such as a bookshelf or similar unit.  
• Do not cover the ventilation of the player  
with newspapers, tablecloths, curtains,  
etc. And do not place the player on a soft  
surface, such as a rug.  
• Do not place the player and adaptors in a  
location near heat sources, or in a place  
subject to direct sunlight, excessive dust,  
sand, moisture, rain, or mechanical  
shock, or in a car with its windows  
closed.  
• Do not place the player in an inclined  
position. It is designed to be operated in  
a horizontal position only.  
• Keep the player and discs away from  
equipment with strong magnet, such as  
microwave ovens, or large loudspeakers.  
• Do not drop or apply strong shock.  
Do not place heavy objects on the player  
and accessories.  
• Do not damage the LCD surface with a  
sharp edged tool.  
On battery pack  
• Certain countries may regulate disposal  
of the battery used to power this product.  
Please consult with your local authority.  
• Because of the battery’s limited life, its  
capacity gradually deteriorates over time  
and repeated use. Purchase a new one  
when the battery holds about only half  
the normal period.  
• The battery may not be charged to its  
fullest capacity when charged for the first  
time, or when it has not been used for a  
long time. The capacity recovers after  
being charged and discharged several  
times.  
On operation  
• Do not leave the battery pack in a car or  
direct sunlight, where temperature goes  
up above 60 ºC (140°F).  
• If the player is brought directly from a  
cold to a warm location, or is placed in a  
very damp room, moisture may condense  
on the lenses inside the player. Should  
this occur, the player may not operate  
properly. In this case, remove the disc  
and leave the player for about half an  
hour until the moisture evaporates. Wipe  
off moisture attached to the LCD surface  
with tissue etc. Turn on the power again  
later.  
• Do not expose to water.  
• Avoid short-circuiting the battery  
connecting jacks with metal objects such  
as a necklace.  
• Make sure dust or sand does not enter the  
battery connecting jacks and the guide  
holes located on the bottom of the player.  
On AC power adaptor and car battery  
adaptor  
• Use the supplied adaptors for the player,  
as other adaptors may cause a  
malfunction.  
• Keep the lens on the player clean and do  
not touch it. Touching the lens may  
damage the lens and cause the player to  
malfunction. Leave the disc lid closed  
except when you insert or remove discs.  
• Turn off the power before disconnecting  
the AC power adaptor, the car battery  
• Do not disassemble or reverse-engineer.  
,continued  
25  
 
 
• Do not touch the metal parts, as it may  
cause a short and damage the adaptors,  
especially if touched by other metal  
objects.  
On cleaning discs, disc/lens cleaners  
Do not use cleaning discs or disc/lens  
cleaners (including wet or spray types).  
These may cause the apparatus to  
malfunction.  
On adjusting volume  
Do not turn up the volume while listening  
to a section with very low level inputs or  
no audio signals. If you do, the speakers  
may be damaged when a peak level section  
is played.  
Notes About the Discs  
• To keep the disc clean, handle the disc by  
its edge. Do not touch the surface.  
On headphones  
• Preventing hearing damage: Avoid using  
headphones at high volumes. Hearing  
experts advice against continuous, loud,  
and extended play. If you experience a  
ringing in your ears, reduce the volume  
or discontinue use.  
• Showing consideration for others: Keep  
the volume at a moderate level. This will  
allow you to hear outside sounds and still  
be considerate to the people around you.  
• Do not expose the disc to direct sunlight  
or heat sources such as hot air ducts, or  
leave it in a car parked in direct sunlight  
as the temperature may rise considerably  
inside the car.  
On cleaning  
• Clean the cabinet, panel, and controls  
with a soft cloth slightly moistened with  
a mild detergent solution. Do not use any  
type of abrasive pad, scouring powder or  
solvent such as alcohol or benzine.  
• Wipe the LCD surface with the soft dray  
cloth lightly. To prevent dirt buildup,  
wipe it frequently.  
• After playing, store the disc in its case.  
• Clean the disc with a cleaning cloth.  
Wipe the disc from the center out.  
Do not wipe the LCD surface with a wet  
cloth. If water enters, a malfunction may  
result.  
• If picture/sound is distorted, the lens may  
be covered with dust. In this case, use a  
commercially-available blower brush for  
camera lenses to clean the lens.  
Avoid touching the lens directly during  
cleaning.  
• Do not use solvents such as benzine,  
thinner, disc/lens cleaners, or anti-static  
spray intended for vinyl LPs.  
• If you have printed the disc’s label, dry  
the label before playing.  
• Do not use the following discs:  
– A disc that has a non-standard shape  
(e.g., card, heart).  
– A disc with a label or sticker on it.  
– A disc that has cellophane tape or  
sticker adhesive on it.  
26  
 
 
Playable Media  
Type  
Disc Logo  
Icon  
Characteristics  
• Commercial DVD  
• DVD+RWs/DVD+Rs/  
DVD+R DLs in +VR  
mode  
• DVD-RWs/DVD-Rs/  
DVD-R DLs in video  
mode  
DVD  
DVD-RWs/DVD-Rs/DVD-  
R DLs in VR (Video  
Recording) mode  
• Music CDs  
CD  
• CD-Rs/CD-RWs in music  
CD format  
DATA CD/DATA DVD  
containing MP3 or JPEG  
files.  
DATA disc  
b
For player that cannot play images that  
contain a copy protection only  
Notes about recordable media  
Some recordable media cannot be played on  
the player due to the recording quality or  
physical condition of the media, or the  
characteristics of the recording device and  
authoring software.  
The disc will not play if it has not been  
correctly finalized. For more information,  
refer to the operating instructions for the  
recording device. Note that some playback  
functions may not work with some  
Images in DVD (VR mode) with CPRM*  
protection may not be played if they contain a  
copy protection signal. “Copyright Lock”  
appears.  
* CPRM (Content Protection for Recordable  
Media) is a coding technology that protects  
the copyright of images.  
DVD+RWs/+Rs/+R DLs, even if they have  
been correctly finalized. In this case, view the  
disc by normal playback.  
,continued  
27  
 
       
• Depending on the writing condition of the  
media, the total number of files and albums  
recognizable may be fewer than 648.  
• The player can display a file or album name up  
to 14 characters. Special character appears as  
Notes on MP3 and JPEG files  
The player can play the following files:  
1
• MP3 files with the extension “.mp3”* .  
2
• JPEG files with the extension “.jpg”* .  
“ .”  
*
• JPEG image files that conform to the  
DCF (Design rule for Camera File  
system) image file format.  
• DATA CDs must be recorded according  
to ISO 9660 Level 1, or its extended  
format, Joliet.  
• The player can display only the currently  
playing album name. Any album located on  
the upper layer is displayed as “\..\.”  
• Playback information of some files may not be  
displayed correctly.  
• DATA DVDs must be recorded  
according to UDF (Universal Disk  
Format).  
Notes on commercial discs  
1
Region code  
* Files in mp3PRO format cannot be played.  
2
* Files with the extension “.jpe” or “.jpeg” can  
It is the system that is used to protect  
copyrights. The region code is shown on  
the DVD VIDEO packages according to  
the region of sale. DVD VIDEOs labeled  
“ALL” or “1” will play on the player.  
play to change the extension “.jpg.”  
z
• To play a complex hierarchy of folders may  
take some time. Create albums with no more  
than two hierarchies.  
• The player plays the files in an album in the  
order the media was recorded.  
ALL  
DVD playback operations  
Some playback operations of DVDs may  
be intentionally set by software producers.  
Since the player plays DVDs according to  
the disc contents the software producers  
designed, some playback features may not  
be available. Also, refer to the instructions  
supplied with the DVDs.  
b
• The player will play any file in the above table,  
even if the file format differs. Playing such  
data may generate noise that can result in  
speaker damage.  
• Some DATA discs created in Packet Write  
format cannot be played.  
• Some DATA discs created in multiple sessions  
may not be playable.  
Music discs encoded with copyright  
protection technologies  
This product is designed to playback discs  
that conform to the Compact Disc (CD)  
standard.  
Various music discs encoded with  
copyright protection technologies are  
marketed by some record companies.  
Please be aware that among those discs,  
there are some that do not conform to the  
CD standard and may not be playable by  
this product.  
• Some JPEG files cannot be played.  
• The player cannot play the JPEG file that is  
larger than 3078 (width) x 2048 (height) in  
normal mode, or larger than 2000 (width) x  
1200 (height) in progressive JPEG. (Some  
progressive JPEG files cannot be displayed  
even if the size is within this specified  
capacity.)  
• The player can recognize up to 299 albums.  
The player will not play beyond the 299th  
album.  
• The player can recognize a combined total of  
up to 648 files and albums. The player will not  
play beyond the 648th file or album.  
28  
 
       
Audio material side of DualDiscs  
A DualDisc is a two-sided disc product  
which mates DVD recorded material on  
one side with digital audio material on the  
other side.  
However, since the audio material side  
does not conform to the Compact Disc  
(CD) standard, playback on this product is  
not guaranteed.  
Specifications  
System  
Laser: Semiconductor laser  
Signal format system: NTSC  
Inputs/Outputs  
VIDEO (video input/output):  
Minijack  
Output 1.0 Vp-p/75 ohms  
AUDIO (audio input/output)  
Stereo minijack  
Output 2.0 Vrms/47 kilohms  
Recommended load impedance over  
47 kilohms  
PHONES (headphones) A/B:  
Stereo minijack  
Liquid Crystal Display  
Panel size: 9 inches wide (diagonal)  
Driving system: TFT active matrix  
Resolution: 800 × 480 (effective pixel rate:  
more than 99.99%)  
General  
Power requirements:  
DC 9.5 V (AC power Adaptor/Car battery  
adaptor)  
DC 7.4 V (Battery pack)  
Power consumption (DVD VIDEO Playback):  
8.5 W (when used with a headphone)  
Dimensions (approx.):  
3
227 × 34.4 × 170.8 mm (9 × 1 /8 ×  
3
6
/4 inches) (width/height/depth) incl.  
projecting parts  
Mass (approx.): 900 g (1.98 lbs)  
Operating temperature: 5 °C to 35 °C (41°F to  
95°F)  
Operating humidity: 25 % to 80 %  
AC Power Adaptor: 110-240 V AC, 50/60 Hz  
Car Battery Adaptor: 12 V DC  
Supplied accessories  
See page 9.  
Specifications and design are subject to change  
without notice.  
29  
 
 
S
Screen Saver 14, 20  
Index  
Setup 19  
Slide Show 17  
Subtitle 8, 20  
Numerics  
16:9 19  
4:3 Letter Box 19  
4:3 Pan Scan 19  
T
Troubleshooting 22  
TV Display 19  
A
Angle Mark 8, 20  
Audio 7, 20  
Audio DRC 20  
Audio Setup 20  
C
CD 13, 27  
Charging time and playing time 10  
D
DATA 16, 27  
Disc Menu 20  
DVD 13, 27  
G
General Setup 19  
J
JPEG 16, 28  
L
Language Setup 20  
LCD Aspect 17  
LCD Mode 17  
M
MP3 16, 28  
O
OSD (On-Screen Display) 20  
P
Parental Control 21  
Password 21  
Playable Media 27  
Playback Information Display 15  
R
Random Play 14  
Region code 28  
Remote battery  
Repeat Play 14  
Resume Play 14  
30  
 
 
 
Carga de la batería  
Preparativos  
Cargue la batería (suministrada) antes de  
utilizar el reproductor por primera vez o  
cuando la batería esté agotada.  
Control de accesorios  
Compruebe que dispone de los siguientes  
elementos:  
• Batería (NP-FX110) (1)  
1
Sujete la batería al reproductor.  
Alinee la batería con las líneas  
ubicadas en la parte inferior del  
reproductor.  
Ubique los ganchos de la batería en los  
orificios ubicados en la parte inferior  
del reproductor.  
• Adaptador de alimentación de CA (1)  
• Adaptador para batería de automóvil (1)  
• Cable de audio/video (clavija mini × 2  
y clavija fono × 3) (1)  
• Control remoto (con batería) (1)  
Para reemplazar la batería del control  
remoto  
Batería  
Cuando la batería se agote, el  
funcionamiento no será posible. Cambie la  
batería.  
1
2
Prepare una nueva batería (batería de  
litio CR2025).  
Retire el compartimiento de la batería  
(2) mientras presiona la palanca de  
bloqueo (1).  
ES  
Marcasdereferencia  
para la conexión  
Base del  
reproductor  
Deslice la batería en la dirección que  
indica la flecha hasta que se ajuste con  
un clic.  
3
4
Retire la batería usada.  
Introduzca la batería nueva en el  
compartimiento de la batería con el  
lado 3 hacia arriba y luego presione el  
compartimiento hasta oír un clic.  
,continúa  
ES  
3
 
     
Tiempo de carga y tiempo de  
reproducción  
Tiempo de carga: aproximadamente 6  
horas  
Tiempo de reproducción:  
aproximadamente 6 horas  
2
Conecte el adaptador de  
alimentación de CA.  
Cuando comienza el proceso de carga,  
se enciende la luz naranja del  
indicador CHARGE.  
INPUT  
POWER  
O
F
F
O
N
HOLD  
PHONES  
AUDIO  
IN/  
OUT  
VIDEO  
IN/  
OUT  
DC IN  
9.5V  
A
B
Los tiempos indicados dependen de las  
siguientes condiciones:  
– Temperatura normal (20 °C (68 °F))  
– Uso de auriculares  
– Configuración del ajuste de luz de fondo al  
mínimo  
DC IN  
9.5V  
Al tomacorriente  
El tiempo de carga puede ser mayor o el tiempo  
de reproducción puede reducirse, según el estado  
de la batería y la temperatura ambiente.  
Para controlar el nivel de batería  
El indicador de batería se muestra cuando  
el reproductor está detenido.  
Adaptadordealimentación  
de CA (suministrado)  
Cuando la batería esté vacía, aparecerá el  
símbolo  
o el indicador CHARGE  
Cuando termina el proceso de carga, el  
indicador CHARGE se apaga.  
Desconecte el adaptador de  
alimentación de CA.  
parpadeará. Coloque el interruptor  
POWER en “OFF”, conecte el adaptador  
de alimentación de CA y recargue la  
batería.  
z
Si se enciende el indicador POWER en vez del  
indicador CHARGE, el interruptor POWER está  
ubicado en “ON”. Ubique el interruptor POWER  
en “OFF” y asegúrese de que el indicador  
CHARGE se encienda.  
Completo  
Agotado  
Para retirar la batería  
Empuje la lengüeta de liberación y deslice  
la batería en la dirección que indica la  
flecha.  
Lengüeta de liberación  
ES  
4
 
• Use el adaptador para batería de automóvil con  
el motor del vehículo en funcionamiento. Si se  
utiliza con el motor del vehículo apagado, la  
batería del automóvil puede agotarse.  
Uso del adaptador para  
batería de automóvil  
El adaptador para batería de automóvil  
(suministrado) está diseñado para una  
batería de automóvil de 12 V, con  
conexión a tierra negativa (no lo utilice con  
baterías de automóvil de 24 V y conexión  
a tierra positiva).  
Después de usar el reproductor en el  
vehículo  
1
2
Apague el reproductor.  
Desconecte el adaptador para batería  
de automóvil.  
3
Apague el motor.  
1
2
Arranque el motor.  
b
• No desconecte el adaptador para batería de  
automóvil ni apague el motor del vehículo  
antes de que haya apagado el reproductor. De  
lo contrario, puede dañar el reproductor.  
• Desconecte el adaptador para batería de  
automóvil después de usarlo. Si lo deja  
conectado, la batería del automóvil puede  
agotarse.  
Conecte el adaptador para  
batería de automóvil.  
INPUT  
POWER  
O
F
F
O
N
HOLD  
PHONES  
AUDIO  
IN/  
OUT  
VIDEO  
IN/  
OUT  
DC IN  
9.5V  
A
B
• No deje el reproductor ni los accesorios en el  
auto.  
DC IN  
9.5V  
Al enchufe del  
encendedorde  
cigarrillos  
Adaptador para batería de  
automóvil (suministrado)  
3
Encienda el reproductor.  
b
• El conductor no debe conectar ni desconectar  
el adaptador para batería de automóvil  
mientras conduce.  
• Arregle el cable de manera que no moleste al  
conductor. Además, no coloque el panel LCD  
donde el conductor pueda verlo.  
• Limpie el enchufe del encendedor de  
cigarrillos. Si está sucio, puede causar fallas en  
el contacto o el funcionamiento.  
ES  
5
 
 
4
Inserte el disco a reproducir.  
Ubíquelo con la cara de reproducción  
hacia abajo y empuje suavemente  
hasta que se ajuste con un clic.  
Reproducción  
Reproducción de  
discos  
De acuerdo con el disco, algunas  
operaciones pueden ser diferentes o estar  
restringidas. Consulte las instrucciones de  
operación proporcionadas con el disco.  
Conecte el adaptador de alimentación de  
CA o la batería.  
La cara de reproducción  
debe mirar hacia abajo  
x
X
5
6
Presione el PUSH CLOSE en la  
tapa del disco para cerrarla.  
N
VOL  
DISPLAY  
MENU  
RETURN  
OPTIONS  
Presione N.  
El reproductor comienza la  
reproducción.  
P
O
W
E
R
C
H
A
R
G
E
P
U
S
H
C
L
O
S
E
De acuerdo con el disco, puede  
aparecer un menú. Presione C/X/x/c  
para seleccionar el elemento y  
presione ENTER.  
OPEN  
P
O
W
E
R
C
H
A
N
R
O
G
E
F
F
O
R
E
W
O
P
PUSH CLOSE OPEN POWER  
Para detener la reproducción  
Presione x.  
1
2
Abra el panel LCD.  
Para poner en pausa la reproducción  
Presione X.  
Deslice el interruptor POWER a  
“ON”.  
El reproductor se enciende y el  
indicador POWER se muestra verde.  
z
Al reproducir un disco después de observar las  
imágenes mediante “Entrada De Linea”, pulse  
INPUT.  
3
Presione OPEN para abrir la  
tapa del disco.  
ES  
6
 
   
b
Información sobre varias operaciones  
de reproducción  
• Los discos creados en grabadoras de DVD  
deben finalizarse correctamente para  
reproducirlos en este reproductor. Para más  
información sobre la finalización, consulte las  
instrucciones de operación suministradas con  
la grabadora de DVD.  
• El disco todavía puede estar girando al abrir la  
tapa del disco. Espere hasta que el disco se  
detenga antes de retirarlo.  
Para  
Operación  
Cambiar el  
tamaño de la  
imagen LCD  
Presione OPTIONS  
para seleccionar “Modo  
LCD”.  
Mostrar el menú Presione MENU o TOP  
del DVD  
MENU.  
Para reanudar la reproducción desde  
donde detuvo el disco (Reanudar  
reproducción)  
Cuando vuelve a presionar N después de  
detener la reproducción, el reproductor  
comienza con la reproducción desde donde  
presionó x.  
Verificar la  
información de  
reproducción del  
DVD  
Presione DISPLAY.  
Reproducir un  
DVD*  
repetidamente  
(Repetir  
Presione DISPLAY  
para seleccionar  
“Repetir”.  
reproducción)  
z
• Para iniciar la reproducción desde el principio  
del disco, presione x dos veces y luego N.  
• Al encender nuevamente el reproductor  
después de apagarlo, la reproducción se  
reanuda automáticamente.  
Reproducir el  
DVD en  
retroceso o  
avance rápido  
(Reproducción  
rápida)  
Presione C/c  
repetidamente en el  
reproductor para  
seleccionar la  
velocidad.  
b
• Dependiendo del lugar donde se detuvo, la  
reproducción puede no comenzar desde  
exactamente el mismo punto.  
• El punto donde detuvo la reproducción se  
borra cuando:  
Alternar entre  
original y Lista  
de reproducción  
en DVD (modo  
VR)  
Presione TOP MENU  
repetidamente.  
– apaga el reproductor (incluso si está en el  
modo de reposo) mientras se reproduce un  
DVD (modo VR).  
– usted abre la tapa del disco.  
– presiona INPUT.  
Cambiar la  
información de  
reproducción del  
CD  
Presione DISPLAY  
repetidamente.  
– desconecte el adaptador o retire la batería  
antes de desactivar el reproductor.  
Reproducir un  
CD  
Presione MENU  
repetidamente.  
repetidamente  
(Repetir  
reproducción)  
Notas sobre el salva pantalla  
• Un salva pantalla aparece cuando deja el  
reproductor en modo detenido o en pausa  
sin funcionar durante más de 15 minutos.  
La imagen desaparece cuando usted  
presiona N.  
• El reproductor queda en modo de espera  
durante 15 minutos después de comenzar  
la función de salva pantalla. Presione N  
para salir del modo de espera.  
Reproducir un  
CD en forma  
aleatoria  
(Reproducción  
aleatoria)  
Presione MENU  
repetidamente.  
* DVD VIDEO solamente  
ES  
7
 
Rotación y plegado del  
panel LCD  
Abra el panel LCD en la posición vertical  
y luego rótelo lentamente 180 grados  
siguiendo la dirección que indica la flecha  
(en sentido de las agujas del reloj).  
Después de rotar el panel LCD 180 grados  
en sentido horario, empuje el panel LCD  
hacia abajo sobre la carcasa del  
reproductor. En esta posición, el panel  
queda mirando hacia arriba.  
Para volver a colocar el panel LCD en su  
posición original  
Abra el panel LCD en la posición vertical  
y rótelo lentamente en sentido antihorario.  
b
• No rote el panel LCD más de 180 grados.  
Además, no lo rote en la dirección contraria. Si  
lo hace, el panel LCD se romperá.  
• Coloque el panel LCD nuevamente en su  
posición original después de usarlo para que  
éste no se dañe por sacudidas violentas o un  
tratamiento similar.  
• No rote el panel LCD cuando esté cerrado o en  
otra posición que no sea vertical. Podría rayar  
el reproductor.  
ES  
8
 
 
 
4-126-487-11(1)  
Sony Corporation Printed in China  
 

Sharp Air Conditioner CV 2P10SC User Manual
Sharp Projector XV Z7000E User Manual
Shindaiwa Brush Cutter X7502825601 User Manual
Sonic Alert Clock SBH400SS User Manual
Sony Digital Camera VCL 2030 S User Manual
Sony MP3 Player ZS X10 User Manual
Sound Dynamics Speaker FS 25B User Manual
State Industries Water Heater SHE50 76 User Manual
Sunbeam Hot Beverage Maker KE6400 User Manual
Sylvania Clock Radio SCR2608 User Manual