Sony Flat Panel Television 158 User Manual

FLAT WIDE DISPLAY  
FWD-42LX1  
FWD-32LX1  
PROTOCOL MANUAL  
1st Edition  
 
Table of Contents  
1. Communication Parameter ................................................................ 1  
2. Pin Configuration ..................................................................................... 1  
3. Communication Data Format ........................................................... 1  
4. General Function ..................................................................................... 3  
5. Picture/Sound .......................................................................................... 10  
6. Size/Shift .................................................................................................... 12  
7. Status Enquiry ........................................................................................ 14  
8. User Rest .................................................................................................... 17  
FWD-42LX1  
FWD-32LX1  
 
 
1. Communication Parameter  
3. Communication Data Format  
(a) Control (Host Request of Write to Display)  
Communication system  
Synchronous system  
Baud rate  
RS-232C  
No.  
Item  
Value  
Asynchronous communication  
9600 bps  
8 bit  
1
Header  
0x8C:Control  
0xXX  
Character length  
Parity  
2
Category  
Function  
Data1 (Length)  
Data2 (Data1)  
:
None  
1 bit  
3
0xXX  
Start bit  
4
0xXX  
Stop bit  
1 bit  
5
0xXX  
Flow control  
None  
:
0xXX  
:
:
0xXX  
X
DataX  
0xXX  
2. Pin Configuration  
X+1  
Check Sum  
0xXX  
* Check Sum: Sum total of 1 to X. Lower one-byte data is validated when a  
value exceeds 255 (1 byte).  
Display side (D-sub 9-pin)  
Host side (D-sub 9-pin)  
* Set the command interval to 500 ms or more when transmitting the  
Control command continuously.  
* Set the command interval to 500 ms or more when transmitting the same  
command (Enquiry) after the Control command.  
(b) Enquiry (Host Request of Read to Display)  
FWD-42LX1/N  
FWD-32LX1/N  
Personal computer  
No.  
Item  
Value  
1
2
3
4
5
6
Header  
0x83:Enquiry  
0xXX  
5
4
3
2
1
5
4
3
2
1
Category  
Function  
Data1  
9
8
7
6
9
8
7
6
0xXX  
_ External view _  
_ External view _  
0xFF  
Data2  
0xFF  
Pin No.  
Signal  
NC  
Pin No.  
Signal  
NC  
Check Sum  
0xXX  
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
RD  
RD  
* Check Sum: Sum total of 1 to 5. Lower one-byte data is validated when a  
TD  
TD  
value exceeds 255 (1 byte).  
NC  
NC  
GND  
NC  
GND  
NC  
NC  
NC  
NC  
NC  
NC  
NC  
FWD-42LX1  
FWD-32LX1  
1
 
(c) Answer (Display Response to Host)  
1 Answer at the time of Control request  
4 Error Answer  
No. Item  
Value  
No. Item  
Value  
1
2
Header  
0x70: Answer  
1
2
Header  
Answer  
0xE0:Answer  
*
*
Answer  
0x00: Completed (Normal completion)  
0x00: No Function Error  
0x01: Check Sum Error  
0x02: Data Length Error  
0x01: Limit Over  
(Abnormal completion: Over upper limit)  
0x02: Limit Under  
3
Check Sum 0xXX  
(Abnormal completion: Under lower limit)  
* 0x00: No Function Error Packet header, category and function code are  
not included in this protocol.  
0x01: Check Sum Error Check sum value of received packet is not  
correct.  
0x02: Data Length Error Packet is correctly received, but the data size is  
over the upper limit.  
0x03: Command Canceled  
(Abnormal completion)  
3
Check Sum 0xXX  
* 0x00: Completed  
0x01: Limit Over  
0x02: Limit Under  
Packet is correctly received and process is  
also correctly completed.  
Packet is correctly received, but the data  
value is over the upper limit.  
Packet is correctly received, but the data  
value is under the lower limit.  
0x03: Command Canceled Packet is correctly received, but the data  
value is not correct or the request cannot be  
accepted in the current host state.  
* Check Sum:  
If the value of a sum total of 1 and 2 exceeds  
255 (1 byte), the data of 1 lower byte is  
effective.  
2 Answer at the time of Enquiry request  
(Normal completion)  
No. Item  
Value  
1
2
3
4
:
Header  
Answer  
0x70: Answer  
0x00: Completed  
Return Data Size 0xXX  
Return Data1  
0xXX  
0xXX  
0xXX  
0xXX  
0xXX  
:
:
:
X
Return DataX  
X+1 Check Sum  
* 0x00: Completed Completed packet is correctly received and process is  
also correctly completed.  
* Return Data returns the read value.  
* Check Sum: If the value of a sum total of 1 to X exceeds 255 (1 byte), the  
data of 1 lower byte is effective.  
3 Answer at the time of Enquiry request  
(Abnormal completion)  
No. Item  
Value  
1
2
Header  
Answer  
0x70: Answer  
0x03: Command Canceled  
(Abnormal completion)  
3
Check Sum 0xXX  
* 0x03: Command Canceled Packet is correctly received, but the data  
value is not correct or the request cannot be  
accepted in the current host state.  
* Check Sum:  
If the value of a sum total of 1 to 2 exceeds  
255 (1 byte), the data of 1 lower byte is  
effective.  
FWD-42LX1  
FWD-32LX1  
2
 
4. General Function  
(a) Mode control  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
Check Sum  
Control  
Enquiry  
0x8C  
0x83  
0x00  
Code Table(1-a)[a]  
0x02  
0xFF  
Code Table(1-a)[b]  
0xFF  
0xXX  
0xXX  
Answer  
Header  
Answer  
Check Sum  
Control  
0x70  
0x70  
0x70  
0x70  
0x00  
0x01  
0x02  
0x03  
0x70  
0x71  
0x72  
0x73  
Completed  
Limit Over  
Limit Under  
Command Canceled  
Answer  
Header  
Answer  
Return to Data Size  
Return Data1  
Check Sum  
Enquiry  
0x70  
0x00  
0x02  
Code Table (1-a)[b]  
0xXX  
Completed  
Code Table(1-a)  
[a]Function  
[b]Range/Switch Code  
Command  
Control  
Enquiry  
Standby  
Power On  
*1  
0x00  
0x01  
Power  
0x00 OFF  
Yes  
Yes  
Enable  
Enable  
0x01 ON  
*2  
Input Select  
0x0A INPUT2 RGB  
Yes  
Yes  
Disable  
Enable  
0x0B INPUT2 COMPONENT  
0x0C OPTION1 VIDEO  
0x0D OPTION1 S VIDEO  
0x0E OPTION1 RGB  
0x0F OPTION1 COMPONENT  
0x10 OPTION2 VIDEO  
0x11 OPTION2 S VIDEO  
0x12 OPTION2 RGB  
0x13 OPTION2 COMPONENT  
0x20 INPUT1 DVI  
0x02  
0x03  
0x04  
0x05  
Force Status Display 0x00 ON  
0x01 OFF  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Disable  
Disable  
Enable  
Disable  
Enable  
Enable  
Enable  
Enable  
Audio Mute  
0x00 OFF  
0x01 ON  
0x00 ON  
0x01 OFF  
0x00 OFF  
0x01 CC1  
0x02 CC2  
0x03 CC3  
0x04 CC4  
Auto Status Display  
Closed Caption  
FWD-42LX1  
FWD-32LX1  
3
 
Code Table(1-a)  
[a]Function  
[b]Range/Switch Code  
Command  
Control  
Enquiry  
Standby  
Power On  
0x06 Color System  
0x00 Auto  
Yes  
Yes  
Disable  
Enable  
0x01 NTSC  
0x02 NTSC4.43  
0x03 PAL  
0x04 SECAM  
0x05 PAL-M  
0x06 PAL-N  
0x07 PAL60  
0x00 Japanese  
0x01 English  
0x02 Deutsch  
0x03 Français  
0x04 Español  
0x05 Italiano  
0x01 - 0xFF  
0x0F Language  
Yes  
Yes  
Disable  
Enable  
0x10 Index Number  
0x13 Power Saving  
Yes  
Yes  
Yes  
Yes  
Disable  
Disable  
Enable  
Enable  
0x00 Standard  
0x01 Reduce  
0x00 ON  
0x14 Speaker Out  
0x16 HD Mode  
Yes  
Yes  
Yes  
Yes  
Yes  
No  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Disable  
Disable  
Disable  
Disable  
Disable  
Disable  
Enable  
Enable  
Enable  
Enable  
Enable  
Enable  
0x01 OFF  
0x00 1080i  
0x01 1035i  
0x17 RGB Mode  
0x00 DTV  
0x01 PC  
0x18 Sync Mode  
0x00 H/Comp  
0x01 Video  
0x1B Clock Display  
0x24 Input Detect(Option1)  
0x00 OFF  
0x1B ON  
0x00 U3(HD15)  
0x01 U1(CVBS, Y/C)  
0x02 U2(BNC)  
0x03 Reserved  
0x04 UN (Network Board)  
0x05 Reserved  
0x06 Reserved  
0x07 Reserved  
0x08 Reserved  
0x09 Reserved  
0x0A Reserved  
0x0B Reserved  
0x0C Reserved  
0x0D Reserved  
0x0E Reserved  
(Continued)  
FWD-42LX1  
FWD-32LX1  
4
 
Code Table(1-a)  
[a]Function  
[b]Range/Switch Code  
Command  
Control  
Enquiry  
Standby  
Power On  
0x24 Input Detect(Option1)  
0x25 Input Detect(Option2)  
0x0F Not Connect  
0x00 U3(HD15)  
0x01 U1(CVBS, Y/C)  
0x02 U2(BNC)  
0x03 Reserved  
0x04 UN (Network Board)  
0x05 Reserved  
0x06 Reserved  
0x07 Reserved  
0x08 Reserved  
0x09 Reserved  
0x0A Reserved  
0x0B Reserved  
0x0C Reserved  
0x0D Reserved  
0x0E Reserved  
0x0F Not Connect  
0x00 OFF  
No  
No  
Yes  
Yes  
Disable  
Disable  
Enable  
Enable  
0x26 Auto Shut OFF  
Yes  
Yes  
Yes  
Yes  
Disable  
Disable  
Enable  
Enable  
0x01 ON  
*2  
0x30 PAP  
0x00 OFF  
0x01 P&P  
0x02 PinP  
0x31 Active Picture  
0x00 Left(P&P)/Main(PinP)  
0x01 Right(P&P)/Sub(PinP)  
Yes  
Yes  
Disable  
Enable  
*2  
0x02 Swap  
0x32 Picture Size(P&P)  
0x00 - 0x0E  
Yes  
Yes  
Yes  
Yes  
Disable  
Disable  
Enable  
Enable  
0x33 Sub Picture Size (PinP)  
0x00 Large  
0x01 Small  
*3  
0x34 Picture Position(PinP)  
0x00 Position1  
0x01 Position2  
0x02 Position3  
0x03 Position4  
Yes  
Yes  
Disable  
Enable  
0x35 PAP Input Detect (Left/Main) 0x0A INPUT2 RGB  
0x0B INPUT2 COMPONENT  
No  
Yes  
Disable  
Enable  
0x0C OPTION1 VIDEO  
0x0D OPTION1 S VIDEO  
0x0E OPTION1 RGB  
0x0F OPTION1 COMPONENT  
0x10 OPTION2 VIDEO  
0x11 OPTION2 S VIDEO  
0x12 OPTION2 RGB  
0x13 OPTION2 COMPONENT  
(Continued)  
FWD-42LX1  
FWD-32LX1  
5
 
Code Table(1-a)  
[a]Function  
[b]Range/Switch Code  
Command  
Control  
Enquiry  
Standby  
Power On  
0x35 PAP Input Detect (Left/Main) 0x20 INPUT1 DVI  
0x36 PAP Input Detect (Right/Sub) 0x0A INPUT2 RGB  
No  
No  
Yes  
Yes  
Disable  
Disable  
Enable  
Enable  
0x0B INPUT2 COMPONENT  
0x0C OPTION1 VIDEO  
0x0D OPTION1 S VIDEO  
0x0E OPTION1 RGB  
0x0F OPTION1 COMPONENT  
0x10 OPTION2 VIDEO  
0x11 OPTION2 S VIDEO  
0x12 OPTION2 RGB  
0x13 OPTION2 COMPONENT  
0x20 INPUT1 DVI  
*1: Transmit the next command 10 seconds after Power On and Power Off commands are transmitted. If not, correct data may not be able to be acquired.  
*2: For INPUT SELECT, PAP, and Active Picture (SWAP), check the busy state using a Busy to INPUT command.  
*3: The Picture Position arrangement is as shown below.  
1
3
2
4
IP Address  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
Data3  
Data4  
Data5  
Check Sum  
Control  
0x8C  
0x00  
0x42  
0x05  
Address 0  
Address 1  
Address 2  
Address 3  
0xXX  
0x00 - 0xFF 0x00 - 0xFF 0x00 - 0xFF  
0x00 - 0xFF  
Answer  
Header  
Answer  
Check Sum  
Control  
0x70  
0x70  
0x00  
0x03  
0x70  
0x73  
Completed  
Command Canceled  
Example of IP Address setting  
192.128.14.1 192 (0xC0) Address 0  
128 (0x80) Address 1  
14  
1
(0x0E) Address 2  
(0x01) Address 3  
* IP Address command can be carried out even in the standby state.  
Code Table(1-a)  
[a]Function  
[b]Range/Switch code  
Command  
Control  
Enquiry  
Standby  
Power On  
0x42 IP Address  
0x43 BackLight  
0x44 Illumination  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Enable  
Disable  
Disable  
Enable  
Enable  
Enable  
0x00 - 0x64  
0x00 OFF  
0x01 Low  
0x02 High  
0x45 Control Mode  
0x00 Main+Remocon  
0x01 Main  
Yes  
Yes  
Disable  
Enable  
0x02 Remocon  
FWD-42LX1  
FWD-32LX1  
6
 
Code Table(1-a)  
[a]Function  
[b]Range/Switch code  
Command  
Control  
Enquiry  
Standby  
Power On  
0x46 On Off Timer Mode  
0x47 On Timer Enable  
0x00 Every Day  
Yes  
Yes  
Enable  
Enable  
0x01 Day Of Week  
bit0 Sunday 1:Enable, 0:Disable  
bit1 Monday 1:Enable, 0:Disable  
bit2 Tuesday 1:Enable, 0:Disable  
bit3 Wednesday 1:Enable, 0:Disable  
bit4 Thursday 1:Enable, 0:Disable  
bit5 Friday 1:Enable, 0:Disable  
bit6 Saturday 1:Enable, 0:Disable  
Yes  
Yes  
Enable  
Enable  
*4  
bit7 Every day 1:Enable, 0:Disable  
0x48 Off Timer Enable  
bit0 Sunday 1:Enable, 0:Disable  
bit1 Monday 1:Enable, 0:Disable  
bit2 Tuesday 1:Enable, 0:Disable  
bit3 Wednesday 1:Enable, 0:Disable  
bit4 Thursday 1:Enable, 0:Disable  
bit5 Friday 1:Enable, 0:Disable  
bit6 Saturday 1:Enable, 0:Disable  
Yes  
Yes  
Enable  
Enable  
*4  
bit7 Every day 1:Enable, 0:Disable  
*4: For every day, all bits should be put in the same state. (Enable:0xff, Disable:0x00)  
(b) Color matrix  
Syntax Header Category Function  
Data1  
Data2  
Data3  
Data3  
Check Sum  
Control 0x8C 0x00 Code Table (1-b)[a] 0x04  
Code Table (1-c) Code Table (1-b)[b] Code Table (1-d) 0xXX  
Syntax  
Header  
0x83  
Category  
Function  
Data1  
Data2  
Check Sum  
Enquiry  
0x00  
Code Table(1-b)[a]  
Code Table (1-c)  
Code Table (1-d)  
0xXX  
Answer  
Header  
0x70  
Answer  
0x00  
Check Sum  
Control  
0x70  
0x73  
Completed  
0x70  
0x03  
Command Canceled  
Answer Header Answer Return to Data Size Return Data1  
Return Data2  
Return Data3  
Check Sum  
Enquiry 0x70  
0x00  
0x04  
Code Table (1-c) Code Table (1-b)[b] Code Table(1-d) 0xXX  
Completed  
Code Table(1-b)  
[a]Function  
[b]Range/Switch code  
Command  
Control  
Enquiry  
Standby  
Power On  
Enable  
0x1D Color Matrix  
0x00 YCbCr  
0x01 YPbPr  
Yes  
Yes  
Disable  
FWD-42LX1  
FWD-32LX1  
7
 
Code Table(1-c)  
Format Select  
0x00  
0x01  
0x02  
0x03  
480p  
1080i  
720p  
480i  
Code Table(1-d)  
Input Select  
0x00  
0x01  
0x02  
Input2  
Option1  
Option2 (Invalid for FWD-32LX1)  
(c) Time control  
Clock Set (Hour, Minute)  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
Data3  
Check Sum  
Control  
0x8C  
0x00  
0x22  
0x03  
Hour:0x00 - 0x17  
Minute:0x00 - 0x3B  
0xXX  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
Check Sum  
0xA3  
Enquiry  
0x83  
0x00  
0x22  
0xFF  
0xFF  
Answer  
Header  
Answer  
Check Sum  
Control  
0x70  
0x70  
0x70  
0x70  
0x00  
0x01  
0x02  
0x03  
0x70  
0x71  
0x72  
0x73  
Completed  
Limit Over  
Limit Under  
Command Canceled  
Answer  
Header  
Answer  
Return to Data Size  
Return Data1  
Return Data2  
Minute:0x00 - 0x3B  
Check Sum  
0xXX  
*
Enquiry  
0x70  
0x00  
0x03  
Hour:0x00 - 0x17  
Completed  
* Data of Hour: 0x80 and Minute: 0x00 is set as Return Data when a timer is not set after factory setting.  
Clock Set (Week)  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
Check Sum  
0xXX  
Control  
0x8C  
0x00  
0x23  
0x02  
Week:Code Table(1-e)  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
Check Sum  
Enquiry  
0x83  
0x00  
0x23  
0xFF  
0xFF  
0xA4  
FWD-42LX1  
FWD-32LX1  
8
 
Answer  
Header  
Answer  
Check Sum  
Control  
0x70  
0x70  
0x70  
0x70  
0x00  
0x01  
0x02  
0x03  
0x70  
0x71  
0x72  
0x73  
Completed  
Limit Over  
Limit Under  
Command Canceled  
Answer  
Header  
Answer  
Return to Data Size  
Return Data1  
Check Sum  
Enquiry  
0x70  
0x00  
0x02  
Week:Code Table(1-e)  
0xXX  
Completed  
Code Table(1-e)  
Week Select  
0x00  
0x01  
0x02  
0x03  
0x04  
0x05  
0x06  
Sunday  
Monday  
Tuesday  
Wednesday  
Thursday  
Friday  
Saturday  
On Timer, Off Timer  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
Data3  
Check Sum  
Control  
0x8C  
0x00  
Code Table(1-f)[a]  
0x03  
Hour:0x00 - 0x17  
Minute:0x00 - 0x3B  
0xXX  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
Check Sum  
Enquiry  
0x83  
0x00  
Code Table(1-f)[a]  
0xFF  
0xFF  
0xXX  
Answer  
Header  
Answer  
Check Sum  
Control  
0x70  
0x70  
0x70  
0x70  
0x00  
0x01  
0x02  
0x03  
0x70  
0x71  
0x72  
0x73  
Completed  
Limit Over  
Limit Under  
Command Canceled  
Answer  
Header  
Answer  
Return to Data Size  
Return Data1  
Return Data2  
Check Sum  
Enquiry  
0x70  
0x00  
0x03  
Hour:0x00 - 0x17  
Minut:0x00 - 0x3B  
0xXX  
Completed  
FWD-42LX1  
FWD-32LX1  
9
 
Code Table(1-f)  
[a]Function  
[b]Range/Switch code  
Command  
Control  
Enquiry  
Standby  
Power On  
Clock Set  
0x22  
0x23  
Hour, Minute  
Yes  
Yes  
Yes  
Disable  
Enable  
Week  
On Timer  
0x50  
Sunday  
Yes  
Disable  
Enable  
0x51  
Monday  
0x52  
Tuesday  
Wednesday  
Thursday  
Friday  
0x53  
0x54  
0x55  
0x56  
Saturday  
Every day  
0x57  
Off Timer  
0x58  
Sunday  
Yes  
Yes  
Disable  
Enable  
0x59  
Monday  
0x5A  
Tuesday  
Wednesday  
Thursday  
Friday  
0x5B  
0x5C  
0x5D  
0x5E  
Saturday  
Every day  
0x5F  
5. Picture/Sound  
(a) Picture/Sound  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
Check Sum  
Control  
Enquiry  
0x8C  
0x83  
0x10  
Code Table(2-a)[a]  
0xFF  
0x02  
0xFF  
Code Table(2-a)[b]  
0xFF  
0xXX  
0xXX  
Answer  
Header  
Answer  
Check Sum  
Control  
0x70  
0x70  
0x70  
0x70  
0x00  
0x01  
0x02  
0x03  
0x70  
0x71  
0x72  
0x73  
Completed  
Limit Over  
Limit Under  
Command Canceled  
Answer  
Header  
Answer  
Return to Data Size  
Return Data1  
Code Table(2-a)[b]  
Check Sum  
0xXX  
Enquiry  
0x70  
0x00  
0x02  
Completed  
FWD-42LX1  
FWD-32LX1  
10  
 
Code Table(2-a)  
[a]Function  
[b]Range/Switch code  
Command  
Control  
Enquiry  
Standby  
Power On  
*
0x00  
0x01  
0x02  
0x03  
0x04  
Contrast  
Brightness  
Chroma  
0x00 - 0x64  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Disable  
Disable  
Disable  
Disable  
Disable  
Enable  
Enable  
Enable  
Enable  
Enable  
*
0x00 - 0x64  
0x00 - 0x64  
0x00 - 0x64  
Phase  
Color Temp  
0x00  
High  
0x01  
Mid  
0x02  
Low  
0x03  
Color1  
Color2  
Color3  
0x04  
0x05  
0x09  
0x0A  
Sharpness  
NR  
0x00 - 0xFF  
0x00  
Yes  
Yes  
Yes  
Yes  
Disable  
Disable  
Enable  
Enable  
OFF  
0x01  
Low  
0x02  
Mid  
0x03  
High  
Auto  
OFF  
0x0B  
0x0C  
Cinema Drive  
0x00  
Yes  
Yes  
Yes  
Yes  
Disable  
Disable  
Enable  
Enable  
0x01  
Dynamic Picture  
0x00  
OFF  
0x01  
Low  
0x02  
High  
ON  
0x0D  
0x0E  
Color Correct  
0x00  
Yes  
Yes  
Yes  
Yes  
Disable  
Disable  
Enable  
Enable  
0x01  
OFF  
Gamma Correct  
0x00  
High  
Mid  
0x01  
0x02  
Low  
0x10  
Picture Mode  
0x00  
Standard  
Dynamic  
User1  
User2  
User3  
Yes  
Yes  
Disable  
Enable  
0x01  
0x02  
0x03  
0x04  
0x30  
0x31  
0x32  
0x33  
0x34  
Volume  
Treble  
0x00 - 0x64  
0x00 - 0x64  
0x00 - 0x64  
0x00 - 0x64  
0x00  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Enable  
Disable  
Disable  
Disable  
Disable  
Enable  
Enable  
Enable  
Enable  
Enable  
Bass  
Balance  
Surround  
OFF  
0x01  
Hall  
0x02  
Simulate  
*:The setting value during two-screen display is as follows:  
Contrast: Setting value ±12 during one-screen display  
Brightness: Setting value ±24 during one-screen display  
FWD-42LX1  
FWD-32LX1  
11  
 
(b) Color temperature  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
Data3  
Check Sum  
Control  
0x8C  
0x10  
Code Table(2-b)[a]  
0x03  
Code Table(2-c)  
Code Table(2-b)[b]  
0xXX  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
Check Sum  
Enquiry  
0x83  
0x10  
Code Table(2-b)[a]  
Code Table(2-c)  
0xFF  
0xXX  
Answer  
Header  
Answer  
Check Sum  
Control  
0x70  
0x70  
0x00  
0x03  
0x70  
0x73  
Completed  
Command Canceled  
Answer  
Header  
Answer  
Return to Data Size  
Return Data1  
Return Data2  
Check Sum  
Enquiry  
0x70  
0x00  
0x03  
Code Table(2-c)  
Code Table(2-b)[b]  
0xXX  
Completed  
Code Table(2-b)  
[a]Function  
[b]Range/Switch code  
Command  
Control  
Enquiry  
Standby  
Power On  
Enable  
0x05  
0x06  
0x07  
Red Gain  
0x00 - 0x64  
0x00 - 0x64  
0x00 - 0x64  
Yes  
Yes  
Disable  
Green Gain  
Blue Gain  
Code Table(2-c)  
Format Select  
0x03  
0x04  
0x05  
Color1  
Color2  
Color3  
6. Size/Shift  
(a) 8 bit register  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
Check Sum  
Control  
Enquiry  
0x8C  
0x83  
0x20  
Code Table(3-b)[a]  
0x02  
0xFF  
Code Table(3-b)[b]  
0xFF  
0xXX  
0xXX  
Answer  
Header  
Answer  
Check Sum  
Control  
0x70  
0x70  
0x70  
0x70  
0x00  
0x01  
0x02  
0x03  
0x70  
0x71  
0x72  
0x73  
Completed  
Limit Over  
Limit Under  
Command Canceled  
FWD-42LX1  
FWD-32LX1  
12  
 
Answer  
Header  
Answer  
Return to Data Size  
Return Data1  
Check Sum  
Enquiry  
0x70  
0x00  
0x02  
Code Table(3-b)[b]  
0xXX  
Completed  
Code Table(3-b)  
[a]Function  
[b]Range/Switch code  
Command  
Control  
Enquiry  
Standby  
Power On  
0x00  
0x01  
0x02  
0x03  
0x04  
H Size  
0x00 - 0x64  
0x00 - 0x64  
0x00 - 0x64  
0x00 - 0x64  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Disable  
Disable  
Disable  
Disable  
Disable  
Enable  
Enable  
Enable  
Enable  
Enable  
H Center  
V Size  
V Center  
Zoom Mode  
0x00  
0x01  
0x02  
0x03  
0x04  
0x00  
0x01  
0x02  
0x03  
0x00 - 0x1F  
0x00  
0x01  
0x00  
0x01  
0x00  
0x01  
0x02  
0x03  
0x00  
0x01  
0x02  
0x03  
0x04  
0x05  
0x06  
0x07  
0x08  
0x00  
0x01  
0x02  
0x03  
0x04  
0x05  
0x06  
Wide Zoom  
Zoom  
Full  
Sub Title  
Normal  
Standard  
x2  
0x05  
Multi Display  
Yes  
Yes  
Disable  
Enable  
x3  
x4  
0x07  
0x08  
Dot Phase  
Auto Wide  
Yes  
Yes  
Yes  
Yes  
Disable  
Disable  
Enable  
Enable  
OFF  
Auto  
0x09  
0x0B  
4:3 Mode  
Normal  
Yes  
Yes  
Yes  
Yes  
Disable  
Disable  
Enable  
Enable  
Wide Zoom  
Position1  
Position2  
Position3  
Position4  
Position1  
Position2  
Position3  
Position4  
Position5  
Position6  
Position7  
Position8  
Position9  
Position1  
Position2  
Position3  
Position4  
Position5  
Position6  
Position7  
*
Multi Position(x2)  
*
0x0C  
Multi Position(x3)  
Yes  
Yes  
Disable  
Enable  
*
0x0D  
Multi Position(x4)  
Yes  
Yes  
Disable  
Enable  
FWD-42LX1  
FWD-32LX1  
13  
 
Code Table(3-b)  
[a]Function  
[b]Range/Switch code  
Command  
Control  
Enquiry  
Standby  
Power On  
*
0x0D  
Multi Position(x4)  
0x07  
0x08  
0x09  
0x0A  
0x0B  
0x0C  
0x0D  
0x0E  
0x0F  
Position8  
Yes  
Yes  
Disable  
Enable  
Position9  
Position10  
Position11  
Position12  
Position13  
Position14  
Position15  
Position16  
*:The Multi Position arrangement is as shown below.  
Multi Position(x2)  
Multi Position(x3)  
Multi Position(x4)  
1
5
9
2
6
3
7
4
8
1
3
2
4
1
4
7
2
5
8
3
6
9
10 11 12  
13 14 15 16  
7. Status Enquiry  
(a) Model name enquiry  
Syntax  
Header  
Category  
Function  
Data1  
0xFF  
Data2  
Check Sum  
0xB1  
Enquiry  
0x83  
0x30  
0x00  
0xFF  
Answer  
Header  
Answer  
Return to Data Size  
Return Data1  
Check Sum  
Enquiry  
0x70  
0x00  
0x02  
Code Table(4-a)  
0xXX  
Completed  
Code Table(4-a)  
Format Select  
0x08  
0x09  
FWD-42LX1  
FWD-32LX1  
(b) Serial number enquiry  
Syntax  
Header  
Category  
Function  
Data1  
0xFF  
Data2  
Check Sum  
Enquiry  
0x83  
0x30  
0x01  
0xFF  
0xB2  
Answer Header Answer Return to  
Data Size  
Return Data1 Return Data2 Return Data3 Return Data4 Check Sum  
Enquiry 0x70  
0x00  
0x05  
Upper 8bit  
Data  
Middle  
Upper Data  
Middle  
Lower Data  
Lower 8bit  
Data  
0xXX  
Completed  
Return Data1-Data4: 0x001E8480 - 0x002DC6BF(2,000,000 - 2,999,999)  
FWD-42LX1  
FWD-32LX1  
14  
 
(c) Operating time enquiry  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
Check Sum  
Enquiry  
0x83  
0x30  
0x02  
0xFF  
0xFF  
0xB3  
Answer Header Answer Return to  
Data Size  
Return Data1 Return Data2 Return Data3 Return Data4 Check Sum  
Enquiry 0x70  
0x00  
0x05  
Upper 8bit  
Data  
Middle  
Upper Data  
Middle  
Lower Data  
Lower 8bit  
Data  
0xXX  
Completed  
Return Data1-Data4: 0x00000000 - 0xD693A3FF(0sec._3,599,999,999sec.)  
(d) Software version enquiry (Main CPU)  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
Check Sum  
Enquiry  
0x83  
0x30  
0x03  
0xFF  
0xFF  
0xB4  
Answer Header  
Enquiry 0x70  
Answer  
Return to Data Size  
Return Data1  
Upper 8bit Data  
Return Data2  
Check Sum  
0x00  
0x03  
Lower 8bit Data  
0xXX  
Completed  
Return Data1-Data2: 0x0000 - 0xFFFF  
Example)  
For version 0.100, they become 01 and 00, respectively.  
(e) 8 bit register enquiry  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
0xFF  
Check Sum  
Enquiry  
0x83  
0x30  
Code Table(4-b)  
0xFF  
0xXX  
Answer Header  
Enquiry 0x70  
Answer  
Return to Data Size  
Return Data1  
Check Sum  
0x00  
0x02  
Code Table(4-b) 0xXX  
Completed  
Code Table(4-b)  
Function  
Return Data  
Unit  
0x07  
0x09  
0x0A  
0x0D  
0x10  
Digital 3.3 V  
0x00 - 0xFF  
0x00 - 0xFF  
0x00 - 0xFF  
0x00 - 0xFF  
0x00 - 0xFF  
Digital 5 V  
Temp1  
Temp(P/S)  
Analog5 V/9 V  
5 V power output  
(f) Software version enquiry (Scaler)  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
0xFF  
Check Sum  
Enquiry  
0x83  
0x30  
0x0F  
0xFF  
0xC0  
Answer Header  
Enquiry 0x70  
Answer  
Return to Data Size  
Return Data1  
Return Data2  
Check Sum  
0x00  
0x03  
Upper 8bit Data  
Lower 8bit Data  
0xXX  
Completed  
Return Data1 - Data2: 0x0000 - 0xFFFF  
Example)  
For version 0.100, they become 01 and 00, respectively.  
FWD-42LX1  
FWD-32LX1  
15  
 
(g) Shutdown Log enquiry  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
Check Sum  
Enquiry  
0x83  
0x30  
0x11  
0xFF  
0xFF  
0xC0  
Answer  
Header  
Answer  
Return to Data Size  
Return Data1  
Check Sum  
0xXX  
Enquiry  
0x70  
0x00  
0x02  
Code Table(4-c)  
Completed  
Return Data1: 0x00 - 0xFF  
Code Table(4-c)  
Shutdown Information  
bit0  
bit1  
bit2  
bit3  
bit4  
bit5  
bit6  
bit7  
Reserved  
1: FAN operation is abnormal  
1: Backlight is abnormal  
0: Normal  
0: Normal  
0: Normal  
0: Normal  
1: Temperature sensor is abnormal  
1: Main power supply is abnormal  
1: Digital power supply is abnormal (3.3 V, 5 V) 0: Normal  
1: Analog supply is abnormal (5 V/9 V)  
1: Scaler is abnormal  
0: Normal  
0: Normal  
Code Table(4-d)  
[a]Function  
[b]Range/Switch code  
Command  
Control  
Enquiry  
Standby Power On  
0x00  
0x01  
Model Name  
0x08 - 0x09  
No  
Yes  
Yes  
Enable  
Enable  
Enable  
Enable  
Serial Number  
0x001E8480 - 0x002DC6BF  
(2,000,000 - 2,999,999)  
Yes  
0x02  
Operation Time  
0x00000000 - 0xD693A3FF  
(0sec._3,599,999,999sec.)  
0x03  
0x07  
0x09  
0x0A  
0x0D  
0x0F  
0x10  
0x11  
0x12  
0x13  
0x14  
0x20  
Soft Version(Main)  
Digital 3.3 V  
0x0000 - 0xFFFF  
0x00 - 0xFF  
0x00 - 0xFF  
0x00 - 0xFF  
0x00 - 0xFF  
0x0000 - 0xFFFF  
0x00 - 0xFF  
0x00 - 0xFF  
0x00 - 0xFF  
0x00 - 0xFF  
No  
Yes  
Enable  
Enable  
Digital 5 V  
Temp1  
Temp(P/S)  
Soft Version(Scaler)  
Analog5 V/9 V  
Shutdown Log  
Digital 3.3 V(Failure)  
Digital 5 V(Failure)  
Analog5 V/9 V(Failure) 0x00 - 0xFF  
*
Busy to INPUT  
0x00 Non Busy  
0x01 Busy  
* Busy to INPUT should be judged by Busy Non Busy. Busy to INPUT may be incorrectly judged during start when it is judged by only Non Busy.  
FWD-42LX1  
FWD-32LX1  
16  
 
8. User Rest  
Syntax  
Header  
Category  
Function  
Data1  
Data2  
Check Sum  
Control  
0x8C  
0x50  
Code Table(5)  
0x02  
0xFF  
0xXX  
Answer  
Header  
Answer  
Check Sum  
Control  
0x70  
0x70  
0x00  
0x03  
0x70  
0x73  
Completed  
Command Canceled  
Code Table(5)  
Function  
Range/Switch code  
Command  
Control  
Enquiry  
No  
Standby Power On  
0x00  
0x01  
0x03  
Picture Reset  
Yes  
Disable Enable  
Audio Reset  
Picture Reset2  
Contrast, Brightness, Chroma, Phase  
FWD-42LX1  
FWD-32LX1  
17  
 
 
The material contained in this manual consists of  
information that is the property of Sony Corporation.  
Sony Corporation expressly prohibits the duplication of  
any portion of this manual or the use thereof for any  
purpose other than the operation or maintenance of the  
equipment described in this manual without the express  
written permission of Sony Corporation.  
Le matériel contenu dans ce manuel consiste en  
informations qui sont la propriété de Sony Corporation.  
Sony Corporation interdit formellement la copie de  
quelque partie que ce soit de ce manuel ou son emploi  
pour tout autre but que des opérations ou entretiens de  
l’équipement à moins d’une permission écrite de Sony  
Corporation.  
Das in dieser Anleitung enthaltene Material besteht aus  
Informationen, die Eigentum der Sony Corporation sind.  
Die Sony Corporation untersagt ausdrücklich die  
Vervielfältigung jeglicher Teile dieser Anleitung oder den  
Gebrauch derselben für irgendeinen anderen Zweck als  
die Bedienung oder Wartung der in dieser Anleitung  
beschriebenen  
Ausrüstung  
ohne  
ausdrückliche  
schriftliche Erlaubnis der Sony Corporation.  
FWD-42LX1  
FWD-32LX1  
 
FWD-42LX1 (SY)  
FWD-32LX1 (SY) E  
9-968-108-01  
Printed in Japan  
2005. 1 22  
©2005  
Sony Corporation  
B&P Company  
 

Silvercrest Blender SSM 550 B1 User Manual
Smooth Fitness Treadmill 917HRO User Manual
Sonance Speaker 91922 User Manual
Sony Cell Phone XPERIA S User Manual
Sony Security Camera SNC M3 User Manual
Southbend Fryer BECT 24 User Manual
SOYO Computer Hardware SY KT333 User Manual
Star Manufacturing Electric Steamer 35SSC User Manual
Sunbeam Clock Radio 89019 User Manual
SV Sound Musical Instrument SX ST User Manual