Sony PDAs Smartphones PEG TG50 User Manual

®
Why can’t I perform a HotSync operation?  
• Is the HotSync  
icon displayed in the task tray in the bottom right-hand  
corner of your computer screen?  
If not, select the Start menu, Programs (All Programs in Windows®  
XP), Sony handheld, and HotSync Manager to start the HotSync  
Manager.  
• Is the Local USB check box in the menu (displayed by clicking the  
HotSync  
icon) selected?  
• Is the USB port active?  
Why isn’t the “Memory Stick” media recognized?  
• Eject the “Memory Stick” media and try inserting it again.  
• Wipe the terminal of the “Memory Stick” media with a soft cloth, such as a  
cotton pad.  
• You cannot use a “Memory Stick” media that is formatted in a device other  
than your CLIÉ handheld. Please format it using your CLIÉ handheld.  
• When the battery of your CLIÉ handheld is running low, data on “Memory  
Stick” media may not be displayed. Recharge the battery of your CLIÉ  
handheld.  
Why isn’t the peripheral device recognized?  
• Check that the remaining battery supply is sufficient.  
• After turning off your CLIÉ handheld, remove the peripheral device and  
reconnect it.  
• For the latest information on peripheral devices supported by your CLIÉ  
handheld, refer to the website below and select your model.  
Playing music: Why can’t I play MP3 files?  
• Check that the MP3 files are copied in the folder “PALM/Programs/  
MSAUDIO” on the “Memory Stick” media.  
• Check that the file format is supported by your CLIÉ handheld.  
b For details on file formats supported by your CLIÉ handheld, refer to “Audio  
Player” in the “CLIÉ Application Manual” installed on your computer.  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
3
 
Playing music: Why doesn’t SonicStage recognize the CLIÉ  
handheld even when it is placed in the cradle?  
• Set to the music transfer mode.  
b For details, refer to “Audio Player” in the “CLIÉ Application Manual” installed  
on your computer.  
• Disconnect your CLIÉ handheld from the cradle, and place it in the cradle  
again. If the problem still persists, restart the computer.  
Why can’t I connect to the Internet?  
• Follow the steps mentioned in “Customizing your Sony CLIÉ™ handheld  
(Preferences): Changing the Network preferences” in the “Handbook” and  
check that the settings of Network Preferences are correct.  
• “NetFront v3.0 for CLIE” may not be able to display certain websites  
designed for your computer’s browser software.  
b For details, refer to the “CLIÉ Application Manual” installed on your computer.  
Why can’t I send or receive e-mails?  
• Follow the steps mentioned in “CLIE Mail” in the “CLIÉ Applications  
Manual” installed on your computer. Check that the settings of mail server,  
user name, and password are correct.  
• If you cannot send an e-mail message, check the destination e-mail address.  
If your problem still persists, then proceed to the next page.  
4
 
Symptoms  
Page  
The Graffiti® writing area is not displayed  
The message “Please insert the Memory Stick media” is  
displayed when a “Memory Stick” media is inserted into the  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
7
 
Symptoms  
Page  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
9
 
If you cannot solve the problem  
If you cannot solve a problem even with the solutions provided in this book,  
please follow the procedure below.  
Sony recommends that you make a note of displayed messages or alerts for  
future reference.  
Step 1 Refer to the operating instructions or  
manuals of each application  
• Please read the manuals “Read This First (Operating Instructions)” and  
“Handbook” carefully.  
Step 2 Refer to the Sony CLIÉ handheld Support  
website  
On the Sony CLIÉ handheld Support website  
(http:/www.clie-link.com), you can see the answers to frequently asked  
questions (FAQ), download the latest programs, and get information on  
how to connect peripheral devices etc.  
Note  
®
Thousands of third-party add-on applications are available for the Palm OS  
platform. Sony does not support third-party applications.  
If you have a problem with a third-party application, contact the developer or  
publisher of the software.  
11  
 
Avoiding problems  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Make a backup  
We recommend that you make a backup of your data in case of any unexpected  
trouble. Backing up your data will ensure that it will be saved on the CLIÉ  
handheld even when you have to perform a hard reset.  
Making a backup using the “Memory Stick  
Backup” application  
You can make a backup on the “Memory Stick” media using the supplied  
Memory Stick Backup application. This is the most convenient way to make a  
backup.  
b “Memory Stick” media (optional) is required.  
For details, refer to “Backing up your Sony CLIÉ™ handheld data:  
Backing up data to a “Memory Stick” media using the Memory Stick  
Backup application” in the “Handbook.”  
®
Making a backup using the HotSync operation  
The data of your CLIÉ handheld is backed up on your computer every time you  
®
perform a HotSync operation. You may lose the data on your CLIÉ handheld  
®
when you perform a hard reset, but if you make a backup with the HotSync  
operation, you can restore any data previously synchronized with your  
®
computer during the next HotSync operation.  
Note  
You cannot make a backup for some applications installed later or some data created with  
application after installing. Specifically you cannot make backup of applications or data  
installed with beaming or “Memory Stick” media by synchronizing your computer to  
your CLIÉ handheld. Use “Memory Stick Backup” to make backup.  
b
For details on HotSync, refer to “Exchanging and updating data using a  
HotSync operation (Other HotSync operations)” in the “Handbook.”  
®
®
12  
 
Symptoms and Solutions  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
My CLIÉ handheld is not working  
properly  
I cannot turn on my CLIÉ handheld  
B The POWER/HOLD switch of your CLIÉ handheld is in the HOLD mode.  
Your CLIÉ handheld does not operate when the POWER/HOLD switch  
is in the HOLD mode. Make sure you release the HOLD mode.  
B The battery of your CLIÉ handheld has run out.  
Place your CLIÉ handheld in the cradle connected to the AC adapter, then  
charge it for a few minutes before turning it on. If it turns on, continue  
charging it for approximately five hours and then perform a soft reset.  
B The connector between your CLIÉ handheld and the cradle is dirty.  
You cannot recharge your CLIÉ handheld if the connector is dirty. Try  
re-installing your CLIÉ handheld several times in the cradle to clean the  
connector.  
I cannot see anything on the screen although the CHG LED  
is on  
B The POWER/HOLD switch of your CLIÉ handheld is in the HOLD mode.  
The screen is not displayed when the POWER/HOLD switch is in the  
HOLD mode.  
B Perform a soft reset by pressing the reset button.  
b For details, refer to “Basic operations of your Sony CLIÉ™ handheld: Restarting  
your Sony CLIÉ handheld” in the “Read This First (Operating Instructions).”  
My CLIÉ handheld is not responding  
B The POWER/HOLD switch of your CLIÉ handheld is in the HOLD mode.  
Your CLIÉ handheld does not operate when the POWER/HOLD switch  
is in the HOLD mode. Make sure you release the HOLD mode.  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
13  
 
       
My CLIÉ handheld is not responding  
B The CLIÉ handheld is placed near the IR port of your computer.  
Move your CLIÉ handheld away from the IR port of your computer  
except when performing an IR HotSync® operation, as a malfunction  
may occur. You can also disable the IR feature by setting Beam  
Receive to Off from General in the Preferences screen.  
B Perform a soft reset by pressing the reset button.  
b For details, refer to “Basic operations of your Sony CLIÉ™ handheld:  
Restarting your Sony CLIÉ handheld” in the “Read This First (Operating  
Instructions).”  
My CLIÉ handheld keeps turning itself off  
B Your CLIÉ handheld is designed to turn itself off after a period of  
inactivity (Automatic power-off). You can set the automatic power-off  
time by tapping General-Auto-off After in the Preferences screen.  
b For details, refer to “Customizing your Sony CLIÉ™ handheld (Preferences):  
Setting the automatic power-off time” in the “Handbook.”  
B Have you set Auto Lock Handheld to After a preset delay in the  
Security screen?  
When you set Auto Lock Handheld to After a preset delay, your  
CLIÉ handheld may turn off after a shorter period even if you set the  
automatic power-off time.  
b For details, refer to “Protecting your data with a password: Locking your CLIÉ  
handheld with a password” in the “Handbook.”  
My CLIÉ handheld is not making any sound  
B Tap General in the Preferences screen and check that System Sound  
is not set to Off.  
b For details, refer to “Customizing your Sony CLIÉ™ handheld (Preferences):  
Setting sounds” in the “Handbook.”  
Tip  
You can also adjust the volume settings in the Adjust Volume screen displayed by pressing  
the A key while pressing the Ctrl key on the hardware keyboard.  
b For details, refer to “Basic operations of your Sony CLIÉ™ handheld: Sony CLIÉ™ handheld  
components: Hardware keyboard” in the “Read This First (Operating Instructions).”  
14  
 
     
The backlight does not turn on when I adjust the  
brightness level  
B If the brightness is set to the lowest level, the display may be illegible, but  
this is not a malfunction.  
Tip  
You can adjust the brightness level in the Adjust Brightness screen displayed by pressing the  
Q key while pressing the  
(red) key on the hardware keyboard.  
I can’t read the screen properly  
B Depending upon the angle of vision, the brightness may be uneven, but this  
is not a malfunction. You can adjust the brightness level in the Adjust  
Brightness screen displayed by pressing the Q key while pressing the  
(red) key on the hardware keyboard. If the backlight is set to off, you can  
turn it on by sliding down the POWER/HOLD switch for more than two  
seconds.  
Tip  
You can switch the backlight on and off by pressing the L key while pressing the Ctrl key on  
the hardware keyboard.  
Applications do not operate properly after I perform a soft  
reset  
B If you encounter application problems (such as improper operations,  
unusual display, or freezing during a soft reset), after you performed a  
reset, the reset may not be completed properly. In this case, perform a soft  
reset once again. If you cannot solve your problem by performing a soft  
reset, try a hard reset.  
b For details, refer to “Basic operations of your Sony CLIÉ™ handheld:  
Restarting your Sony CLIÉ handheld” in the “Read This First (Operating  
Instructions).”  
Note on performing a reset  
After performing a reset, do not press the reset button until the  
Preferences screen or the Welcome screen is displayed.  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
15  
 
     
I cannot use the Jog Dial™ navigator  
B The Jog Dial™ navigator is not available for all applications.  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
About CLIE Launcher  
I cannot drag and drop in CLIE Launcher  
B Select Preferences from the Options menu, and then select the Use  
Drag&Drop check box and tap the OK button.  
b For details, refer to “Sony CLIÉ™ handheld basic operations: Using “CLIE  
Launcher”” in the “Handbook.”  
I cannot start CLIE Launcher  
B When the application screen of the Palm OS® standard is displayed, select  
Go To CLIE Launcher View from the Options menu.  
b For details, refer to “Sony CLIÉ™ handheld basic operations: Using the Palm  
®
OS standard screen” in the “Handbook.”  
B When the free space of the memory is insufficient, CLIE Launcher may not  
start.  
®
b On the Palm OS standard screen, tap Info from the Application menu to  
check the free space of the memory.  
Then, tap Delete from the Application menu to delete unnecessary  
applications.  
16  
 
       
The applications on a “Memory Stick” media are not  
displayed  
B You can display only the applications that stored in the folder “/PALM/  
Launcher.”  
Move the application to the folder “/PALM/Launcher.”  
Also, the applications are not displayed if the Show Expansion Cards  
check box in the CLIE Launcher Preferences screen is not selected.  
b For details, refer to “Sony CLIÉ™ handheld basic operations: Using “CLIE  
Launcher”: Menu List” in the “Handbook.”  
B When the battery of your CLIÉ handheld is running low, the data on a  
“Memory Stick” media may not be displayed.  
Recharge the battery of your CLIÉ handheld.  
The CLIE Launcher groups and the categories of the Palm  
®
OS standard screen are different  
B The CLIE Launcher groups are classified into groups such as Picture,  
Movie, etc., depending on what can be performed on your CLIÉ handheld.  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
®
I cannot perform a HotSync operation  
Performing initial checks  
Checking your CLIÉ handheld  
B Is the Palm™ Desktop for CLIÉ software installed?  
B Is the connector between your CLIÉ handheld and cradle dirty?  
To clean the connector, try repeatedly placing your CLIÉ handheld in the  
cradle and taking it out again.  
B Are the CLIÉ handheld and cradle correctly connected?  
Check that the Battery Indicator on your CLIÉ handheld screen is  
. If  
properly.  
is displayed, place your CLIÉ handheld in the cradle  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
17  
 
       
Performing initial checks  
B Is the memory space of your CLIÉ handheld sufficient?  
Delete any unnecessary data and perform the HotSync® operation once  
again.  
B Are you using the same user name that is used for another CLIÉ handheld?  
Change the user name.  
Checking your computer  
B Is the operating system on your computer compliant?  
The following is the operating systems that are compliant with your CLIÉ  
handheld. Operating systems other than the following are not supported.  
• Microsoft Windows® 98 Second Edition  
• Microsoft Windows® 2000 Professional  
• Microsoft Windows® Millennium Edition  
• Microsoft Windows® XP  
Note  
Upgrade versions of operating systems are not supported.  
B If you are using Windows® 2000 Professional or Windows® XP, log in as  
an “Administrator.”  
B Is the USB cable of the cradle connected to your computer?  
B Is the HotSync  
icon displayed in the task tray in the bottom right-hand  
corner of your computer screen?  
If not, select the Start menu, Programs (All Programs in Windows®  
XP), Sony handheld, and HotSync Manager to start the HotSync  
Manager.  
B Is the Local USB check box in the menu (displayed by clicking the  
HotSync  
icon selected?  
If not, select the Local USB check box.  
B Is the USB port active?  
Check that the USB port works normally by connecting another USB  
device such as a USB mouse.  
B When using terminal extension products for laptops such as a port  
replicator, you may not be able to use either the port replicator or the USB  
port of your computer.  
18  
 
Performing initial checks  
B Quit applications other than the Palm™ Desktop for CLIÉ software.  
If you cannot perform the HotSync® operation even after following the  
above instructions, perform a soft reset by pressing the reset button of your  
CLIÉ handheld.  
b For details, refer to “Basic operations of your Sony CLIÉ™ handheld: Restarting  
your Sony CLIÉ handheld” in the “Read This First (Operating Instructions).”  
For particular problems about HotSync® operations, refer to  
the following.  
®
I cannot start a HotSync operation when pressing the  
HotSync button of the cradle  
B Tap HotSync and check that Local and Cradle/Cable are selected.  
B Perform a soft reset on your CLIÉ handheld.  
®
I cannot stop a HotSync operation  
B You may not be able to stop a HotSync® operation by tapping Cancel for  
a few seconds after you start a USB HotSync® operation. Try again after a  
while.  
B If you cannot stop a HotSync® operation even by tapping Cancel, perform  
a soft reset on your CLIÉ handheld.  
b For details, refer to “Basic operations of your Sony CLIÉ™ handheld:  
Restarting your Sony CLIÉ handheld” in the “Read This First (Operating  
Instructions).”  
®
It takes a long time to complete a HotSync operation  
B Depending on the application you are using, it may take time to complete  
a HotSync® operation if the data/file is too large.  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
19  
 
     
Data cannot be synchronized with some applications  
®
during a HotSync operation  
B The user name for the Palm™ Desktop for CLIÉ software does not match  
the one for your CLIÉ handheld.  
In the Palm™ Desktop for CLIÉ software, select the user name  
corresponding to your CLIÉ handheld user name.  
B The application is not set to synchronize files.  
Click the HotSync  
icon in the task tray in the bottom right-hand corner  
of your computer screen and select Custom. Check that all the  
applications are set to synchronize files.  
B Third party software for backing up or synchronizing data is installed on  
your computer or CLIÉ handheld.  
Not all applications on the Palm™ Desktop for CLIÉ software can be  
synchronized.  
B The memory space of your CLIÉ handheld is insufficient.  
Delete the unnecessary data and perform the HotSync® operation once  
again.  
B Private data is hidden with the Security setting.  
The data that is hidden cannot be displayed on the Palm™ Desktop for  
CLIÉ software. When you want to display the data, select Show  
Records in the Current Privacy settings on the Security screen and  
enter the password.  
B Make sure that “Intellisync Lite” is installed to synchronize the Date Book,  
Address, To Do List and Memo Pad of your CLIÉ handheld with  
Microsoft® Outlook.  
b For details, refer to “Intellisync Lite” in the “CLIÉ Application Manual”  
installed on your computer.  
20  
 
 
®
I cannot back up certain types of data with a HotSync  
operation  
B You cannot make a backup for some applications installed later or some  
data created with application after installing. Specifically you cannot make  
backup of applications or data installed with beaming or “Memory Stick”  
media by synchronizing your computer to your CLIÉ handheld. Use  
“Memory Stick Backup” to make backup.  
b For details, refer to “Backing up your Sony CLIÉ™ handheld data: Backing  
up data to a “Memory Stick” media using the Memory Stick Backup  
application” in the “Handbook.”  
The Palm™ Desktop for CLIÉ software does not start or  
cannot be selected from the menu  
B Is the Palm™ Desktop for CLIÉ software properly installed on your  
computer?  
The hardware or the software of your computer may not be compatible  
with the Palm™ Desktop for CLIÉ software. Uninstall the Palm™  
Desktop for CLIÉ software and reinstall.  
The HotSync Manager does not start (the HotSync  
icon  
is not displayed in the bottom right-hand corner of my  
computer screen)  
B Reinstall the Palm™ Desktop for CLIÉ software.  
Mail software on my computer starts automatically when  
®
starting a HotSync operation  
B A mail software that you do not use regularly or a mail software that is not  
installed is selected in Mail setup.  
Click the HotSync  
icon in the bottom right-hand corner of your  
computer screen and select Custom. Select Mail from conduit, click  
Change, start Mail setup and specify the mail software that you use  
regularly.  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
21  
 
         
Mail software on my computer starts automatically when  
®
starting a HotSync operation  
B The settings of the mail software are not complete.  
Set up the mail software properly on your computer.  
®
I cannot perform a HotSync operation via a modem  
Checking your CLIÉ handheld  
B Check that you enter the correct phone number for the access point.  
B If you are using call waiting on your service line, tap Networkand Phone  
in the Preferences screen, and select the Disable call waiting check  
box in the Phone Setup screen and enter the correct phone number.  
B If a prefix is required, select the Dial prefix check box in the Phone  
Setup screen and enter the correct phone number.  
B Check that the remaining battery supply is sufficient.  
Checking your computer  
B Check that your computer is turned on and the automatic shut-off setting  
in the power saving mode is disabled.  
B Check that the modem is properly connected to the service line.  
B Click the HotSync  
icon in the bottom right-hand corner of your  
computer screen, and check that the Modem check box is selected.  
B Check that the modem connected to your computer is turned on. You  
cannot turn on a modem with the Auto-Off feature by operating your CLIÉ  
handheld.  
B Check that the modem is properly connected to the serial port of your  
computer.  
B Check that the Setup string setting in the Setup window of the HotSync  
Manager is correct.  
b For details, refer to the manual of your modem.  
22  
 
 
®
I cannot perform a HotSync operation via a modem  
B Should a problem occur when the Speed setting in the Setup/Modem  
window of HotSync Manager is As fast as possible or at a certain  
speed, try setting at a lower speed.  
B Check that the Speed setting in the Setup/Modem window is  
appropriate for your modem.  
B Turn off the modem for a while and turn it on before connecting it again.  
®
I cannot perform an IR HotSync operation  
B Check that the IR port of your computer is enabled.  
B An IR HotSync® operation is not available if your computer does not have  
an IR port.  
B Check that the HotSync  
icon is displayed in the task tray in the bottom  
right-hand corner of your computer screen and the HotSync Manager is  
running. When the HotSync Manager is running, the shortcut menu should  
be displayed by clicking the HotSync  
icon.  
B If you are using Windows® 2000 Professional/Windows® XP, click the  
HotSync icon in the bottom right-hand corner of your computer screen  
and check that the Beaming check box is selected.  
B If you are using Windows® 98 Second Edition/Windows® Millennium  
Edition, click the HotSync  
icon in the bottom right-hand corner of  
your computer screen and check that the Local Serial check box is  
selected.  
B If you are using Windows® 98 Second Edition/Windows® Millennium  
Edition, click the HotSync  
icon in the bottom right-hand corner of  
your computer screen and click the Local tab in the Setup window. Then  
check that the simulated port for IR communication is selected in Serial  
Port.  
B Check that Local and IR to a PC/handheld are selected in the HotSync  
screen on your CLIÉ handheld.  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
23  
 
 
®
I cannot perform an IR HotSync operation  
B Point the IR port of your CLIÉ handheld directly at the IR port of your  
computer between 4 to 8 inches (approximately 10 to 20 centimeters)  
apart. Best results of beaming distance may vary depending on  
compatibility between devices.  
B You cannot perform an IR HotSync® operation if the battery remaining is  
insufficient. After charging the battery of your CLIÉ handheld, try the IR  
HotSync® operation again.  
B Reduce the transmission speed.  
If you are using call waiting on your service line, tap Connection and IR  
to a PC/handheld in the Preferences screen. Then tap Edit, Details  
and specify Speed in the Details screen.  
24  
 
®
If you still cannot perform a HotSync operation  
If you cannot solve your HotSync operation problem by following the  
troubleshooting items, follow the procedure below.  
Check if any “Unknown device” is listed in the Device  
Manager on your computer.  
1 Right-click My Computer and select Properties from the  
menu.  
The System Properties screen is displayed.  
2 If you are using Windows® 2000 Professional/Windows® XP,  
click the Hardware tab.  
3 Click the Device Manager tab.  
4 Check if there is a device marked with  
or  
.
A device with such mark is not operating normally. Contact the  
manufacturer of the device to get information on the latest device drivers.  
You cannot perform a HotSync® operation before you  
install the Palm™ Desktop for CLIÉ software on your  
computer  
®
If you perform a HotSync operation before you install the CLIÉ drivers on  
your computer, other drivers may be installed on your computer and a problem  
may occur in your computer system.  
Make sure you install the PalmDesktop for CLIÉ software before  
®
performing a HotSync operation.  
Do not use a USB hub  
If you connect the cradle to your computer via a USB hub, you may not be able  
®
to perform a HotSync operation properly. Make sure you connect the cradle  
directly to a USB port of your computer.  
Some computers have the hub function built into their internal circuitry.  
Contact your computer manufacturer to check whether the USB port of your  
computer is connected to an internal USB hub.  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
25  
 
 
Check that the USB port of your computer is enabled  
If you are using a Windows® 95 pre-installed computer or other older type of  
computer equipped with a USB port, the USB port may be disabled by default.  
If you cannot use a different device, such as a USB mouse, check the BIOS  
setting of your computer.  
In addition, check the setting in the Device Manager. Right-click My  
Computer and select Properties from the menu. (If you are using  
Windows® 2000 Professional/Windows® XP, click the Hardware tab.) Click  
the Device Manager tab and check that “USB controller” is displayed in the  
Device Manager screen.  
If “USB controller” is not displayed  
b For details, refer to the manual of your computer.  
26  
 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Error messages  
An error message is displayed repeatedly  
B Perform a soft reset.  
The error message “Invalid process” is displayed when  
starting an application  
B If the memory space of your CLIÉ handheld or “Memory Stick” is  
insufficient, applications may not start properly. Delete any unnecessary  
data after backing up data as needed.  
The error message for insufficient memory is displayed  
B If the memory space of your CLIÉ handheld or “Memory Stick” is  
insufficient, applications may not start properly. Delete any unnecessary  
data after backing up data as needed.  
B Delete unused data of the “Date Book” application and the “To Do”  
application.  
To delete data of the “Date Book” application, select Purge in the  
Record menu and set purge to Delete events older than.  
To delete data of the “To Do” application, select Purge in the Record  
menu and set purge to Delete all To Do items marked completed.  
B Delete e-mail messages in “CLIE Mail,” and then empty the Trash.  
B Select Delete Cache from Options menu in “NetFront v3.0 for CLIE.”  
B If add-on applications are installed on your CLIÉ handheld, delete those  
applications.  
b For details, refer to “Enhancing features with add-on applications: Installing:  
Deleting the installed add-on applications” in the “Handbook.”  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
27  
 
       
®
The HotSync operation does not start and a message is  
displayed on the screen  
B Move your CLIÉ handheld away from the IR port of your computer except  
when performing an IR HotSync® operation, as a malfunction may occur.  
You can also disable the IR feature by setting Beam Receive to Off from  
General in the Preferences screen.  
B If you set the IR port to search automatically for the target IR devices on  
your computer, follow the procedure below to disable the function.  
1 Select the Start menu, Settings (except for Windows® XP), and  
Control Panel.  
2 Double-click the Infrared icon (the Wireless Link icon in Windows®  
2000 Professional/Windows® XP).  
3 Click the Sending image tab.  
4 Clear the check box Send the image from the digital camera  
to your computer using the wireless link and click OK.  
5 Click the HotSync  
icon in the task tray in the bottom right-hand  
corner of your computer screen and enable Infrared in the menu.  
An error message saying there is insufficient memory  
appears while receiving data using the IR port or the  
Bluetooth communication  
B To receive data using the IR port or the Bluetooth communication, the free  
space of your CLIÉ handheld’s memory must be more than twice the size  
of data to be received. If the memory space of your CLIÉ handheld is  
insufficient, delete any unnecessary data after backing up data as needed.  
B Perform a soft reset by pressing the reset button.  
b For details, refer to “Basic operations of your Sony CLIÉ™ handheld:  
Restarting your Sony CLIÉ handheld” in the “Read This First (Operating  
Instructions).”  
28  
 
   
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
I cannot enter data properly  
My CLIÉ handheld activates a wrong feature when I tap a  
button or screen icon  
B The digitizer is not correctly calibrated.  
Select Digitizer in the Preferences screen and adjust the digitizer.  
b For details, refer to “Customizing your Sony CLIÉ™ handheld (Preferences):  
Adjusting the Digitizer” in the “Handbook.”  
B Your CLIÉ handheld may not be able to recognize tapping properly if you  
apply a protection sheet to the screen.  
I cannot display the menu by pressing and holding the  
Home /Menu  
button  
B Some applications or screens do not have the menu feature. Retry with  
another application.  
I do not understand how to use the hardware keyboard  
B Refer to “Basic operations of your Sony CLIÉ™ handheld : Entering data”  
and “Sony CLIÉ™ handheld components : Hardware keyboard” in the  
“Read This First (Operating Instructions).”  
Tips  
You can also see it in the Keyboard help screen displayed by pressing the K keys while  
pressing the Ctrl key.  
See the supplied “Graffiti Card.”  
Numbers or symbols are entered when pressing the  
alphabetical keys on the hardware keyboard  
B Release the Lock (blue) function by pressing the Caps Lock key while  
pressing the  
(blue) key.  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
29  
 
           
®
The Graffiti writing area is not displayed  
B The Graffiti® writing area is sometimes not displayed, even if the cursor is  
found in the writing area. In this case, enter data using the hardware  
keyboard.  
My CLIÉ handheld does not recognize handwritten  
characters  
B For your CLIÉ handheld to recognize handwritten characters entered with  
the stylus, you must use Graffiti® writing.  
b For details, refer to “Entering data on your Sony CLIÉ™ handheld: Using  
®
Graffiti writing to enter data” in the “Handbook.”  
B Make sure you enter the Graffiti® strokes in the Graffiti® writing area.  
B Make sure you enter the Graffiti® strokes for letters in the left side of the  
Graffiti® writing area and numbers in the right side.  
B Check that Graffiti is not shifted into extended or punctuation mode.  
b For details, refer to “Entering data on your Sony CLIÉ™ handheld: Using  
®
Graffiti writing to enter data” in the “Handbook.”  
B How to enter Graffiti characters faster and more accurately.  
b For details, refer to “Entering data on your Sony CLIÉ™ handheld: Using  
®
Graffiti writing to enter data” in the “Handbook.”  
30  
 
   
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
How to operate basic applications (PIM)  
My CLIÉ handheld does not display the correct date when  
I tap the Today button  
B The date setting of your CLIÉ handheld is not correct.  
Check that the settings (time, time zone, daylight saving time) in the Date  
& Time Preferences screen are correct.  
b For details, refer to “Customizing your Sony CLIÉ™ handheld (Preferences):  
Setting the Date & Time preferences” in the “Handbook.”  
I cannot find the data I created when opening it in the  
application  
B Check that you select All in the category list in the top right-hand corner  
of the screen.  
B Check that Show Records is selected in the Security screen.  
B Tap Show in “To Do” and check that you select the Show Only Due  
Items check box.  
I cannot change the order of memos in a list  
B If you cannot manually arrange the order of the memos in the Memo Pad  
list screen, select Preferences from the Options menu. Then check that  
Manual is selected for the Sort by field.  
B The settings of the display order in the Palm™ Desktop for CLIÉ software  
cannot be synchronized.  
Even if memos are arranged alphabetically in the Palm™ Desktop for  
CLIÉ software, the notepad on your CLIÉ handheld automatically  
re-orders the synchronized memos in accordance with the Memo  
Preferences setting.  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
31  
 
       
An event created in the “Date Book” application cannot  
be listed in the week view  
B In the Week view, you cannot select overlapping events that have the same  
start time. If you have two or more events with the same start time, select  
the Day view to view overlapping events.  
I cannot transfer vCard data created with the “Address”  
application on my CLIÉ handheld  
B The vCard data created with the “Address” application on your CLIÉ  
handheld cannot be read by the Palm™ Desktop for CLIÉ software  
because of its format “ver3.X.” When you want to transfer Address data to  
the Palm™ Desktop for CLIÉ software on your computer, perform a  
®
HotSync operation (the vCard data created with the Palm™ Desktop for  
CLIÉ software can be read by the “Address” application on your CLIÉ  
handheld). When you transfer vCard data to a device other than a CLIÉ  
handheld, the data may not be displayed properly on the device if the data  
version is not supported.  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
I cannot beam data  
Performing initial checks  
B Tap General in the Preferences screen and check that Beam Receive  
is set to ON.  
B Make sure you point the IR port of your CLIÉ handheld directly at the IR  
port of the target device.  
B The distance between the devices is not correct.  
Make sure the distance between your CLIÉ handheld and the target device  
is 4 to 8 inches (approximately 10 to 20 centimeters). Best results of  
beaming distance may vary depending on compatibility between devices.  
B When transmitting multiple files using the IR port, the contents of each file  
may be replaced with one another. Send one file at a time to avoid this.  
32  
 
       
The error message is displayed for insufficient memory  
when I receive data by beaming  
B To receive data using the IR port, the free space of your CLIÉ handheld’s  
memory must be more than twice the size of data to be received. If the  
memory space of your CLIÉ handheld is insufficient, delete any  
unnecessary data after backing up data as needed.  
B Perform a soft reset by pressing the reset button.  
b
For details, refer to “Basic operations of your Sony CLIÉ™ handheld: Restarting  
your Sony CLIÉ handheld” in the “Read This First (Operating Instructions).”  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
I cannot exchange data using the  
Bluetooth™ function  
B Set to Enabled in the Bluetooth Preferences screen of “Prefs.”  
Check that the blue Bluetooth LED turns on.  
B If you have renamed a target Bluetooth™ compatible device registered on  
your CLIÉ handheld, the device may be listed in the previous name when  
you detect target Bluetooth™ compatible devices.  
In this case, follow the procedure below.  
1 Press and hold the Home /Menu  
button from the Bluetooth  
Preferences screen.  
2 Tap Disable device name cache from the Options menu.  
3 Detect target Bluetooth™ compatible devices.  
b For details, refer to “Have a try: Using the Bluetooth™ function” in the “Read  
This First (Operating Instructions).”  
B The file contents and the file names sometimes counterchange when you  
transfer many files at the same time using the Bluetooth™ function.  
Transfer files one by one when you use the Bluetooth™ function to  
transfer files.  
33  
 
   
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
I forgot my password  
I forgot my password and my CLIÉ handheld is locked  
B You must perform a hard reset on your CLIÉ handheld. If you perform a  
hard reset, your CLIÉ handheld will be restored to default setting and data  
or installed add-on applications will be deleted.  
b For details, refer to “Basic operations of your Sony CLIÉ™ handheld:  
Restarting your Sony CLIÉ handheld” in the “Read This First (Operating  
Instructions).”  
I forgot my password and my CLIÉ handheld is not locked  
B You can use the Security function to delete the password, but all private  
records will be deleted. To back up all the data including private records,  
perform a HotSync® operation before you delete the password. Then  
restore your private records saved on your computer by following the  
procedure below.  
1 Tap Password in the Security screen. The Password dialog box  
is displayed. In the dialog box, tap Lost Password to delete the  
password.  
The password and all private records are deleted.  
®
2 Perform a HotSync operation to restore your private records.  
34  
 
     
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
I cannot use a “Memory Stick” media  
I cannot copy/move data between a “Memory Stick”  
media and my CLIÉ handheld  
B Check that the write protect tab of the “Memory Stick” media is not set to  
“LOCK.”  
B The free space of your CLIÉ handheld’s memory is insufficient.  
To copy/move data from a “Memory Stick” media to your CLIÉ handheld,  
the free space of your CLIÉ handheld’s memory must be at least equal to  
the size of the data. If the memory space of your CLIÉ handheld is  
insufficient, delete any unnecessary data after backing up data as needed.  
The message “Please insert the Memory Stick media” is  
displayed when a “Memory Stick” media is inserted into  
the “Memory Stick” slot  
B The “Memory Stick” media is not recognized correctly.  
Eject the “Memory Stick” media and try inserting it again.  
I cannot start applications on a “Memory Stick” media  
B The free space of your CLIÉ handheld’s memory is insufficient.  
To start an application on a “Memory Stick” media from the Application  
Launcher screen, the free space of your CLIÉ handheld’s memory must be  
at least equal to the size of the application. If the memory space of your  
CLIÉ handheld is insufficient, delete any unnecessary data after backing  
up data as needed.  
B Specify the location where the application is to be installed as “Memory  
Stick” media and check that HotSync® operation is performed properly.  
When it is installed properly, copy or move the application from the  
“Memory Stick” media to your CLIÉ handheld using the “CLIE Files”  
application.  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
35  
 
       
My CLIÉ handheld cannot read data on a “Memory Stick”  
media  
B When you use the installation tool in the Palm™ Desktop for CLIÉ  
software to save data on a “Memory Stick” media, the data will be stored  
in the folder “/PALM/Launcher.” However, you cannot locate the folder  
with some applications on your CLIÉ handheld. In this case, copy the data  
from the “Memory Stick” media to your CLIÉ handheld using the “CLIE  
Files” application.  
b For details about reference folders of each application on a “Memory Stick”  
media, refer to “About files stored on “Memory Stick” media” in the “CLIÉ  
Application Manual” installed on your computer.  
For any third-party application, contact the developer of the software.  
Use “Memory Stick Import”/“Memory Stick Export” application to install  
data from your computer to “Memory Stick” media.  
My CLIÉ handheld does not recognize a “Memory Stick”  
media or an error occurs  
B Eject the “Memory Stick” media and try inserting it again.  
B If the terminal part of the “Memory Stick” media is dirty, your CLIÉ  
handheld cannot read the data. Wipe the terminal with a soft cloth, such as  
a cotton pad.  
B You cannot use a “Memory Stick” media that is formatted in a device other  
than your CLIÉ handheld. Please format it on your CLIÉ handheld.  
B When the battery of your CLIÉ handheld is running low, data on a  
“Memory Stick” media may not be displayed. Recharge the battery of your  
CLIÉ handheld.  
36  
 
   
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
I cannot make a backup  
I cannot make a backup of certain data on my computer  
®
with a HotSync operation  
B You cannot make a backup for some applications installed later or some  
data created with application after installing. Specifically you cannot make  
backup of applications or data installed with beaming or “Memory Stick”  
media by synchronizing your computer with your CLIÉ handheld. Use  
“Memory Stick Backup” to make backup.  
b For details, refer to “Backing up your Sony CLIÉ™ handheld data: Backing  
up data to a “Memory Stick” media using the Memory Stick Backup  
application” in the “Handbook.”  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
I cannot transfer data  
I cannot transfer image files or movie files from my  
computer to my CLIÉ handheld  
B Use a computer application such as Image Converter or PictureGear Studio  
to transfer image files or movie files from your computer to your CLIÉ  
handheld.  
b For details, refer to the “CLIÉ Application Manual” installed on your  
computer or Help files of each application.  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Peripheral devices are not recognized  
B Check that the remaining battery supply is sufficient.  
B After you turn off your CLIÉ handheld, remove the peripheral device and  
reconnect it.  
B For the latest information on peripheral devices supported by your CLIÉ  
handheld, refer to the website below and select your model.  
37  
 
         
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
I cannot play music (Audio Player)  
Playing music  
There is no sound  
B Increase the volume.  
B Check that the volume is not set to the Muting mode.  
b For details, refer to “My CLIÉ handheld is not making any sounds” on page 14.  
The sound is too low  
B Tap AVLS and switch to the normal display.  
The sound is noisy  
B If you are using other applications of your CLIÉ handheld and processing  
the data when playing the music, there will be some noise.  
I cannot play music while other applications are running  
B Make sure that Enable background play is checked on the  
Preferences screen of Audio Player.  
B You cannot play music while any of the following applications are  
running:  
• Movie Player  
• Voice Recorder  
• CLIE Mail  
38  
 
           
The sound becomes distorted  
B The bit rate at the time of recording is low. Record music at a higher bit  
rate that is within the specification range.  
b For details, refer to “Audio Player” in the “CLIÉ Application Manual”  
installed on your computer.  
The sound is coming from only one side of the earphones  
B Make sure you insert the earphone plug properly into the earphone jack.  
The names of music files on a “Memory Stick” media are  
not displayed when I start the Audio Player application  
B Depending on the music files that are recorded on the “Memory Stick”  
media, it may take time to read files completely. While reading, the  
operation of Audio Player is unavailable, but this is not a malfunction.  
I cannot play the music once I have reached the limit of  
playback  
B You cannot play audio files that have date expired or reached the limit of  
playback, and ATRAC3plus format files.  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
39  
 
       
MP3 files cannot be read or played  
B Check that the MP3 files are copied in the folder “PALM/Programs/  
MSAUDIO” on the “Memory Stick” media.  
B Check that the file format is supported by your CLIÉ handheld.  
b For details on file formats supported by your CLIÉ handheld, refer to “Audio  
Player” in the “CLIÉ Application Manual” installed on your computer.  
B Audio files encoded in VBR (Variable Bit Rate) cannot be played on your  
CLIÉ handheld.  
Check the information of the audio file in the About Track screen, and if  
the bit rate of the audio file is 0 kbps, the file is encoded in VBR.  
b For details on file formats supported by your CLIÉ handheld, refer to “Audio  
Player” in the “CLIÉ Application Manual” installed on your computer.  
The next track cannot be found  
B If you enable shuffle mode and disable repeat mode when playing music,  
the next track cannot be found if the final track is being played.  
In this case, select REP ALL and then search for the next track.  
The sound stops suddenly  
B Check that the remaining battery supply is sufficient.  
B Wipe the terminal with a soft cloth, such as a cotton pad.  
40  
 
     
Connecting to the computer  
SonicStage does not recognize my CLIÉ handheld even  
when it is placed in the cradle  
B Check that the cradle is properly connected to your computer.  
B To check in/out audio files, a “MagicGate Memory Stick” media is  
required.  
Make sure you are using a “MagicGate Memory Stick” media.  
B OpenMG may take time to confirm data. Please wait for a while.  
B Set to the music transfer mode.  
b For details, refer to “Audio Player” in the “CLIÉ Application Manual”  
installed on your computer.  
B Disconnect your CLIÉ handheld from the cradle, and place it in the cradle  
again. If the problem still persists, restart the computer.  
The connection suddenly gets cut  
B Connect the AC adapter to the cradle.  
B Check that the cradle is properly connected to your computer.  
B Place your CLIÉ handheld properly in the cradle.  
The number of songs that can be checked out is not  
enough (the time to record is not enough)  
B Any data other than music data is stored on the “Memory Stick” media.  
The number of songs that can be checked out is reduced as the free space  
of the “Memory Stick” media is reduced. Move non-music data from the  
“Memory Stick” media onto your computer to increase the free space of  
the “Memory Stick” media.  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
41  
 
       
After I connect to the computer, the drive is recognized  
but the contents cannot be found  
B Reconnect your CLIÉ handheld to your computer after inserting a  
“Memory Stick” media.  
Operation during connection becomes unstable  
B If you connect the cradle to your computer via a USB hub or extension  
USB cable, you may not be able operate your CLIÉ handheld properly.  
Make sure you connect the cradle directly to a USB port of your computer.  
The error message “Unsafe Removal of Device” is suddenly  
displayed on my computer screen  
B Do not remove the CLIÉ handheld from the cradle or tap Exit during  
check in/check out (sending music) or when you're copying files using  
MS import.  
42  
 
     
Other problems  
The CLIÉ handheld does not make any sound  
B If you connect the earphones to your CLIÉ handheld, the system sound of  
your CLIÉ handheld, the alarm sound and the game sound can be heard  
from the earphones.  
B Check that the volume is not set to the Muting mode.  
A “Memory Stick” media cannot be inserted  
B Insert the “Memory Stick” media in the correct direction.  
b For details, refer to “Basic operations of your Sony CLIÉhandheld: Sony  
CLIÉhandheld components: “Inserting/removing “Memory Stick” media”  
in the “Read This First (Operating Instructions).”  
A “Memory Stick” media that is used with other devices  
cannot be used with my CLIÉ handheld  
B Copy the necessary data on “Memory Stick” media onto your computer,  
and then reformat the “Memory Stick” media on your CLIÉ handheld.  
®
®
b For details, refer to “Using “Memory Stick ” media: Using “Memory Stick ”  
media: Formatting “Memory Stick” media” in the “Handbook.”  
I cannot operate my CLIÉ handheld for a while after a  
“Memory Stick” is inserted into the slot  
B When you insert a “Memory Stick” media containing many audio files, it  
may take time to read files completely. This is not a malfunction. Wait till  
either the song name is displayed on the Audio Player screen or the  
“Memory Stick” LED turns off.  
43  
 
         
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
About Sound Utility/Sound Converter 2  
I cannot transfer audio data to my CLIÉ handheld  
B You need to encode audio data using the supplied “Sound Converter 2”  
application to play audio files with the “Sound Utility” application.  
Your CLIÉ handheld is based on Palm OS® 5.  
It is not compatible with any other “Sound Converter” application supplied  
with another CLIÉ handheld based on Palm OS® 4.  
B If you encode audio data with the “Sound Converter” application supplied  
with another CLIÉ handheld based on Palm OS® 4, and transfer the data to  
your CLIÉ handheld, follow the procedure below to delete the data and  
re-encode and transfer audio data using “Sound Converter 2,” supplied  
with your CLIÉ handheld.  
1 Start the “Sound Utility” application on your CLIÉ handheld.  
2 The Invaild Data dialog box is displayed.  
3 Select OK to delete the data.  
* If you select Cancel, the data deletion will be canceled but the data will not  
be listed in “Sound Utility.” When you start “Sound Utility,” the same dialog  
box will be displayed.  
B If you encode audio data with the supplied “Sound Converter 2”  
application and transfer the data to another CLIÉ handheld, follow the  
procedure below to delete the data. With another CLIÉ handheld based on  
Palm OS® 4, you cannot automatically delete audio data encoded by the  
“Sound Converter 2” application.  
1 Start the “Memory Stick Gate” application.  
2 Search the database that meets all following terms.  
• type: PCMr  
• Creator ID: SdAd  
• DB name: “AlarmSound################” (“#” stands for a single  
digit.)  
3 Delete the database you have searched.  
44  
 
   
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
About movies  
I cannot use some features with MPEG Movie format files  
B The following features cannot be used with MPEG Movie format files.  
• Play list edit  
• Title change  
• Thumbnail display  
• Index registration/search  
• Resume replay  
I cannot change a title in Movie Player format files  
B You cannot change a title or delete a file in any of the following cases:  
• When the write protect tab of the “Memory Stick” media is set to “LOCK.”  
• The Movie file (.MQV file) is read-only.  
• The additional information file (.MAI file) is read-only.  
Moreover, you cannot register/delete the index, update the resume time  
and Thumbnail in either of the following cases:  
• When the write protect tab of the “Memory Stick” media is set to “LOCK.”  
• The additional information file (.MAI file) is read-only.  
Moreover, the play list cannot be edited in either of the following cases:  
• When the write protect tab of the “Memory Stick” media is set to “LOCK.”  
• The play list file (MQV_LIST.TXT) is read-only.  
45  
 
     
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
I cannot connect to the Internet  
I cannot connect to the Internet  
B Try connecting to the Internet again after a while.  
The message “Incorrect setting” or “Certification is  
invalid” is displayed  
B Check that the settings of Network in the Preferences screen are correct.  
b For details, refer to “Customizing your Sony CLIÉ™ handheld (Preferences):  
Changing the Network preferences” in the “Handbook.”  
I cannot connect to the Internet after restoring data using  
the “Memory Stick Backup” application  
B Select Network in the Preferences screen and reselect Service. (You  
do not need to change the Network settings).  
After selecting the same service, tap the Connect button to connect to the  
Internet.  
46  
 
       
The contents of websites cannot be displayed  
(NetFront v3.0 for CLIE)  
Images are not displayed  
B Start the “NetFront v3.0 for CLIE” application and press and hold the  
Home /Menu  
button. Tap NetFront Settings in the Options  
menu and check the settings for image display.  
• Images, Animations: Set the checkbox to on.  
B The files may not be compatible with the “NetFront v3.0 for CLIE”  
application. The file formats compatible with the “NetFront v3.0 for  
CLIE” application are GIF (including animation GIF), JPEG, PNG, and  
MNG.  
B The file size may be too large.  
All or some website contents are not displayed  
B You cannot view the website contents that are not compatible with the  
“NetFront v3.0 for CLIE” application such as Macromedia Flash  
resources.  
B “NetFront v3.0 for CLIE” may not be able to display certain websites  
designed for your computer’s browser software.  
b For details, refer to “NetFront v3.0 for CLIE” in the “CLIÉ Application  
Manual” installed on your computer.  
B The website page size may be too large. In addition, HTML tags or page  
construction may affect its availability.  
Internet connection takes too much time to download the  
contents of websites  
B Connecting to the Internet using another Internet service provider or access  
point may improve the access time. Connecting during off-peak hours may  
also improve download time.  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
47  
 
       
I cannot access a certain website  
B Check that you have entered the correct URL. Make sure you differentiate  
“-” (hyphen) from “ _ ” (underscore), or “0” (number) from “O” (alphabet)  
correctly.  
B To enter “˜” (tilde) in the URL:  
• Display the numeric keyboard and tap “~”. Note that the appearance of “˜”  
(tilde) on screen varies between the computer and your CLIÉ handheld.  
• When you use the hardware keyboard to enter, press L key while pressing  
the  
(red) key.  
B When you access the website using bookmarks, the URL saved as the  
bookmark may be changed. Try to find the updated URL by entering the  
URL of the upper directory.  
B While the “NetFront v3.0 for CLIE” application is running, press and hold  
the Home /Menu  
button, select NetFront Settings from the  
Options menu, and check the proxy settings.  
Contact your Internet service provider for information about proxy,  
address, and port settings.  
B The message “Memory is insufficient” is displayed.  
Re-start the “NetFront v3.0 for CLIE” application. If the problem cannot  
be solved by re-starting, perform a soft reset.  
B Download files or saved pages cannot be deleted.  
You cannot delete files using the “NetFront v3.0 for CLIE” application.  
Use the “CLIE Files” application to delete files.  
48  
 
 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
I cannot use e-mail (CLIE Mail)  
I cannot send or receive e-mail messages  
I cannot send or receive mails  
B Check the e-mail address.  
B Check that the mail server settings are correct.  
b For details, refer to “CLIE Mail” in the “CLIÉ Application Manual” installed  
on your computer.  
B Wait for a while and retry.  
B With some service providers, you may have to first receive a mail before  
you can start sending mails. Perform the following.  
1 Tap Accounts from Options menu in “CLIE Mail.”  
2 Tap and select the e-mail address you want to send or receive, and  
then tap Edit.  
3 Tap More.  
4 Tap V in Authentication and select POP Before SMTP.  
B With some service providers, you may not be able to send mails due to  
security systems.  
The message “Account is invalid” or “Incorrect password”  
is displayed  
B Check that you use the correct user name and password.  
b For details, refer to “CLIE Mail” in the “CLIÉ Application Manual” installed  
on your computer.  
Continued on next page  
• • • • • • • • • • • • • • • • • • • • • • • • •  
49  
 
       
I cannot synchronize data between “CLIE Mail” and  
e-mail software, such as “Outlook Express,” on my  
computer  
B If “Microsoft® Outlook Express” and “Microsoft® Outlook” are installed  
together on a computer, you cannot synchronize the data between  
“Outlook Express” and “CLIE Mail.” Reset MAPI of your computer by the  
following steps.  
1 Select the Start menu, Settings (except for Windows® XP), and  
Control Panel.  
2 Double-click the Internet Option icon.  
3 Click the Programs tab in the Internet Properties dialog box.  
4 Click Hotmail from the E-mail pull down menu and click the OK  
button.  
5 Restart your computer.  
6 Double-click the Internet Properties icon in the Control Panel  
window.  
7 From the E-mail pull-down menu in the Programs tab, select the  
E-mail software that you want to synchronize with “CLIE Mail”  
and click the OK button.  
50  
 
 
Other problems  
I receive mails from Mailer Daemon  
B Your mail has not been sent. Check the e-mail address you are mailing to.  
You may also receive mails from Mailer Daemon if the mail server of the  
receiver is not working or if the receiver has changed his/her e-mail  
address.  
I cannot synchronize mail data with the e-mail software on  
my computer  
B Check that the settings for transferring e-mails are correct.  
b For details, refer to “CLIE Mail: Transferring e-mail messages from your  
computer: Setting up your CLIÉ handheld for HotSync e-mail transfers” in the  
“CLIÉ Application Manual” installed on your computer.  
In addition, you may be able to ascertain the cause if you check the log  
®
displayed by tapping Log in the CLIÉ handheld after performing a HotSync  
operation.  
51  
 
     
Getting Help  
Intellisync Lite:  
Support information:  
For CLIÉ handheld and applications other than  
the above mentioned:  
Sony offers several support options for your CLIÉ handheld. If you have  
questions or problems, please refer to one of the following for a solution:  
Read This First (supplied), Handbook (supplied),  
Troubleshooting (this guide), Getting Started booklet,  
Setup poster (supplied) all describe how to use your CLIÉ handheld.  
Sony CLIÉ handheld support website  
Provides the latest information on your CLIÉ handheld. On this website,  
you will find:  
• Frequently Asked Questions (FAQs)  
• Online Operating Instructions  
• Installation information  
• Software updates  
• Online knowledge base  
CLIE Contact List  
Opening Hours: Monday-Friday 08:00-18:00 (local time)  
Country  
Austria  
France  
Germany  
Ireland  
Italy  
Phone number  
0810 00 11 73  
08 20 82 05 87  
0180 300 06 58  
189 092 5010  
8488 00772  
Netherlands  
Switzerland (French)  
Switzerland (German)  
United Kingdom  
020 201 36 94  
0844 810139  
0844 850138  
0845 6014254  
Support is available in Dutch, English, French and German.  
52  
 
Customer registration  
If you do not fill in the customer registration directly after installing the Palm™  
Desktop for CLIÉ software, follow the instructions in this section to complete  
the registration.  
To register your CLIÉ handheld, proceed as follows:  
1 Double-click the Sony CLIÉ Registration icon on the Windows®  
desktop or click Start on the task bar, point to Programs (All  
Programs in Windows® XP), Sony Handheld and click Sony  
CLIÉ Registration.  
The Sony CLIÉ Registration screen appears.  
2 Depending on your language, click on the link that will redirect you to  
registration  
Your computer connects to the Internet, and the Web page for user  
registration is displayed:  
• English customers will be redirected to the following link:  
• German customers will be redirected to the following link:  
• French customers will be redirected to the following link:  
3 Follow the on-screen instructions.  
Note  
Your computer needs to be connected to the Internet to complete the registration.  
53  
 
 
 
For the latest information on support,  
check our support website  
For the latest information on CLIÉ products and  
accessories, check  
 

Shark Vacuum Cleaner SV726N User Manual
Sharp Calculator EL 1611P User Manual
Sony Camcorder 4 170 095 111 User Manual
Sony Portable CD Player CDX F7000 User Manual
Sony Portable Multimedia Player NWZ W202 User Manual
Sony Switch UH 1000 User Manual
Star Manufacturing Toaster QCS3 1600B User Manual
Sun Microsystems Server X4540 User Manual
Sylvania VCR C6260VD User Manual
T Fal Gas Grill Use Grill Panini Maker User Manual