StarTechcom Computer Drive HSB110SATBK User Manual

Instruction Manual  
5.25in Trayless Hot Swap Mobile Rack for 3.5in SATA Hard Drives w/LCD and Fan  
HSB110SATBK  
DE: Bedienungsanleitung - de.startech.com  
FR: Guide de l'utilisateur - fr.startech.com  
Installation  
WARNING! Hard drives and storage enclosures require careful  
handling, especially when being transported. If you are not careful  
with your hard disk, lost data may result. Always handle your hard  
drive and storage device with caution. Be sure that you are properly  
grounded by wearing an anti-static strap when handling computer  
components or discharge yourself of any static electricity build-up  
by touching a large grounded metal surface (such as the computer  
case) for several seconds.  
1.Turn your computer off and any peripherals connected to the  
computer (i.e. printers, external hard drives, etc.). Unplug the  
power cable from the rear of the power supply on the back of the  
computer and disconnect all peripheral devices.  
ES: Guía del usuario - es.startech.com  
IT: Guida per l'uso - it.startech.com  
NL: Gebruiksaanwijzing - nl.startech.com  
PT: Guia do usuário - pt.startech.com  
Packaging Contents  
• 1 x Trayless Mobile Rack  
• 1 x SATA Data Cable  
• 1 x Set of Keys  
• 1 x Package of Mounting Screws  
• 1 x Installation Guide  
2.Remove the cover from the computer case. Refer to  
documentation for your computer system for details.  
3.Remove the front cover plate for the 5.25in bay that will contain  
the Mobile Rack. Refer to documentation for your computer  
system for details.  
System Requirements  
• Computer chassis/case with available 5.25in external bay  
• SATA enabled computer system with available SATA data/power  
connections  
4.Refer to documentation for your computer system for instructions  
on how to mount 5.25in devices into the computer case.  
Mounting screws are provided, if necessary.  
Front View  
5.Once mounted in the case, connect the 7-pin SATA data cable from  
the motherboard or SATA controller card to the rear of the Mobile  
Rack.  
6.Connect the 15-pin SATA power cable from the computer power  
supply to the rear of the Mobile Rack.  
NOTE: An optional 4-pin LP4 Molex power connector is also  
available if the computer power supply does not have any available  
SATA power connectors.  
7.Place the cover back onto the computer case.  
8.Insert the power cable into the socket on the power supply and  
reconnect all other connectors removed in Step 1.  
Rear View  
How to Use  
Installing A Hard Drive  
1.Open the front bay of the Mobile Rack by pulling on the door  
release latch. Swing the door fully open.  
2.Gently slide the 3.5in SATA hard drive into the bay, connector first,  
with the label facing up.  
3.Slide the hard drive at least 3/4 of the way into the bay, then close  
the door to fully insert the hard drive. Make sure the door closes  
fully, and the latch properly engages.  
4.Use the provided key to lock the door on the Mobile Rack.  
NOTE: The Mobile Rack will not power up the hard drive unless the  
door is locked.  
Manual Revision: 04/08/2011  
 

Sennheiser Microphone COM 190 User Manual
Shoprider Mobility Aid 888WNLL User Manual
Shure Microphone PGA181 User Manual
Sony Cell Phone ST26a User Manual
Sony Headphones MDR AS40EX User Manual
Sony Stereo Amplifier XM GTR2202 User Manual
Southwing Headphones SH505 User Manual
Sunbeam Popcorn Poppers CP4500 User Manual
Sunrise Medical Mobility Aid Series 420 User Manual
Sylvania Tablet Accessory 76 009 DA User Manual