Scientific Atlanta KB4200 User Manual

User’s Guide  
FCC Compliance  
FCC Declaration of Conformity  
This device complies with Part 15 of FCC Rules. Operation is subject to the  
following two conditions: 1) the device may not cause harmful interference,  
and 2) the device must accept any interference received, including interference that  
may cause undesired operation.  
KB4200 Wireless Keyboard  
Wireless Keyboard  
Model KB4200  
Manufactured by: Scientific-Atlanta, Inc.;  
4261 Communications Drive;  
Atlanta, Georgia 30093-2860; USA  
Telephone: 770-236-1077  
Note  
This equipment has been tested and found to comply with the limits for a class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential installation.  
This equipment generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference  
to radio communication. However, there is no guarantee that interference will not occur  
in a particular installation. If this equipment does cause harmful interference to radio  
or television reception, which can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference by one or more of the following  
measures:  
CBL  
MENU  
TV  
SELECT  
INFO  
EXIT  
SETTINGS  
GUIDE  
CHANNEL  
Esc  
F1  
F2  
F3  
F4  
F5  
F6  
F7  
F8  
F9  
F10  
F11  
F12  
Rec  
Print  
Scrn  
Scroll  
Lock  
FAV  
LAST  
Home  
Bypass  
1
2
3
4
5
6
7
8
9
0
_
-
~
`
!
1
@
2
#
3
$
4
%
5
^
6
&
7
*
8
(
9
)
0
+
=
Backspace  
{
[
}
]
|
\
Page  
Up  
Q
W
E
R
T
Y
U
I
O
P
Tab  
:
;
Caps  
Lock  
A
S
D
F
G
H
J
K
L
"
'
Page  
Down  
Enter  
Reorient or relocate the receiving antenna.  
<
>
.
?
/
Z
X
C
V
B
N
M
End  
Shift  
Shift  
,
Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
FN  
Ctrl  
Alt  
App1  
App2  
Insert  
Delete  
Consult the dealer or an experienced radio/ TV technician for help.  
Any changes or modifications not expressly approved by Scientific-Atlanta could void  
the users authority to operate this equipment.  
Canada EMI Regulation  
This Class B digital apparatus meets all requirements of the Canadian Interference  
Causing Equipment Regulations.  
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le  
matériel brouilleur du Canada.  
United States: Scientific-Atlanta, Inc., 5030 Sugarloaf Parkway, Box 465447, Lawrenceville, GA 30042  
Europe: Scientific-Atlanta Europe GmbH, Westerbachstrasse 28-32, 61476 Kronberg, Germany  
Asia-Pacific: Scientific-Atlanta (Singapore) Pte. Ltd., 1 Claymore Drive, #08-11 Orchard Towers,  
Singapore 229594  
o
Latin America: Scientific-Atlanta Argentina S.A., Carlos Pelligrini 1149, Piso 11 ,  
Capital Federal 1011, Buenos Aires, Argentina  
© 2001 Scientific-Atlanta, Inc.  
Printed in USA  
Part Number 745467 Rev C  
All rights reserved.  
www.scientificatlanta.com  
November 2001  
IMPORTANT RULES FOR SAFE OPERATION  
Remove the Battery Tab  
Important: You must remove the  
shipping tab from the battery compart-  
ment before using the KB4200  
Wireless Keyboard. Otherwise, the  
keyboard will not function.  
The battery compartment may contain a  
tab to prevent the batteries from draining  
during shipping. Before you use the  
keyboard, turn the keyboard over and  
make sure that the tab has been removed.  
If the tab is still in place, grasp the end of  
the tab and pull.  
Read and Retain These Instructions  
Liquid or Moisture  
Read all of the instructions before you  
operate this equipment. Give  
particular attention to all safety  
precautions. Retain the instructions  
for future reference.  
Do not expose this equipment to liquid or  
moisture. Do not place this equipment on a  
wet surface. Do not spill liquids on or near this  
equipment.  
Servicing  
Comply with all warning and caution  
statements in the instructions.  
Observe all warning and caution  
symbols that are affixed to this  
equipment.  
Do not open the cover of this equipment. If  
you open the cover, your warranty will be  
void. Refer all servicing to qualified personnel  
only. Contact your cable service provider for  
instructions.  
Program the Keyboard  
Introduction  
Follow these steps if none of the codes  
listed for your TV brand work, or if your  
TV brand is not listed.  
1. Make sure that the TV is turned on  
before you search the code library.  
2. Point your keyboard toward the TV.  
3. Press and hold SELECT and TV Power  
until the LED on your keyboard blinks  
twice.  
4. Using the keys on your keyboard, press  
991. The LED blinks twice.  
5. Press the TV Power key to try the  
first code.  
Your KB4200 Wireless Keyboard (keyboard)  
allows you to enter text for e-mail and other  
applications through your Explorer® Digital  
Home Communications Terminal (DHCT).  
You can also use your keyboard to control your  
DHCT and your TV.  
Comply with all instructions that  
accompany this equipment.  
PowerSources  
A label on this equipment indicates the correct  
power source for this equipment. Use only AA  
alkaline batteries in this equipment.  
Cleaning the Equipment  
Your cable service provider has programmed  
your keyboard to operate your DHCT. To  
program your keyboard to operate your TV,  
use the procedures in this guide.  
Note: If you have questions about the  
operation of this keyboard, contact your cable  
service provider.  
Use a damp cloth to clean this equip-  
ment. Do not use either a liquid cleaner  
or an aerosol cleaner to clean this  
equipment. Do not use a magnetic/static  
dust removal device.  
DamageThatRequiresService  
For damage that requires service, contact your  
cable service provider. Refer service to  
qualified personnel when any of the following  
occurs.  
6. Did the TV turn off?  
Program for TV Operation  
Follow these steps to program your keyboard  
for TV operation.  
1. Make sure the power to your TV is turned  
on before you program your keyboard.  
2. Locate your TV brand in the TV Setup  
Codes table in this guide. If your TV brand  
is not listed, go to Searching the Code  
Library.  
3. Point your keyboard away from the DHCT,  
the TV, and the VCR.  
4. On your keyboard, press and hold SELECT  
and TV Power until the LED on your  
keyboard blinks twice.  
5. Using the numeric keys on your keyboard,  
enter the 3-digit setup code for your TV  
brand. The LED on your keyboard blinks  
twice.  
6. Point your keyboard toward the TV and test  
the POWER, VOLUME, and MUTE  
functions.  
If yes, press SELECT.  
If no, press the TV Power key  
again to try the next code.  
CAUTION:  
Liquid enters the equipment  
Do not place a magnet or any  
type of magnetic/static dust  
removal device, such as a  
duster, on or near this equip-  
ment. Magnetic/static devices  
may affect the operation of this  
equipment.  
Note: The LED blinks three times  
when you reach the end of the library.  
7. Confirm that the setup code is correct  
by pointing your keyboard toward the  
TV and testing the POWER,  
A heavy object falls on the equipment  
There is exposure to rain or water  
If you drop or damage the equipment  
Operation is not normal (the instructions  
describe the proper operation).  
VOLUME, and MUTE functions.  
ProgramforVolumeControl  
Upon completion of any service or repairs to  
this keyboard, ask the service technician to  
perform safety checks to determine that the  
equipment is in proper operating condition.  
You can program your keyboard to  
control the volume and mute functions  
through either the TV or the DHCT. The  
default is to control the volume through  
the TV. Follow these steps to program  
your keyboard for volume control.  
1. Point your keyboard away from the  
DHCT and the TV.  
Placement  
Place this equipment on a stable surface  
when storing. The surface must support  
the size and weight of this equipment.  
2. Press and hold SELECT and CBL  
Power until the LED on your  
keyboard blinks twice.  
3. Using the keys on your keyboard, press  
993. The LED blinks twice.  
4. Press either TV Power or CBL Power  
to indicate which device you will use to  
control the Volume and Mute keys.  
The LED blinks twice.  
WARNING:  
Avoid personal injury and  
damage to this equipment.  
Placing this equipment on an  
unstable surface may cause it  
to fall.  
7. If these functions do not operate, repeat  
this procedure from step 1. Use the next  
setup code for your TV brand, if available.  
Search the Code Library  
If none of the listed TV codes work, you can  
enter a code that searches the library of codes.  
Your keyboard automatically selects the proper  
code for your TV.  
5. Point your keyboard toward the TV or  
DHCT and press the VOL+ and VOL-  
keys to confirm that the correct  
device adjusts the volume.  
1
2

Vizio Car Satellite TV System E390VL User Manual
Sony VPLL ZM31 User Manual
Sony TC TX595 User Manual
Sony PCM R700 User Manual
Sony HANDYCAM SR67 User Manual
Sony HANDYCAM PJ30 User Manual
Sony Cyber shot DSCW190R User Manual
Sony Camcorder EVI H100S User Manual
Sanyo Car Satellite TV System DP39843 User Manual
Samsung SYNCMASTER 320MX 3 User Manual