Multi-light Array
Video bracket
90 Day Limited Warranty
Sima Products warrants this product against
defects in materials and workmanship for a period
of 90 days from the date of retail purchase. During
the warranty period, the product will be repaired or
replaced, at Sima’s option. You can register your
Multiple SL-20IR units can be assembled
into a multi-light array by connecting them
together using our patent-pending
interlocking design. There is no limit to the
number of units that can be interlocked.
To use the video bracket (included):
1. Attach the video bracket to the bottom
of your camcorder by screwing the nut
into the threaded mounting hole. Do
not over-tighten.
Infrared LED Night Vision
Video Light for Digital
Cameras & Camcorders
2. Position the bracket where desired. Tip:
to avoid blocking the light with the
camcorder’s viewing screen, angle the
bracket forward to a position where
the light is across from the lens.
3. Attach the SL-20IR to the shoe mount
on the video bracket. Adjust as
needed.
Conditions
To connect two units, simply slide the shoe
of one SL-20IR into the mounting slot on the
side or top of the other unit as shown below.
Tighten the adjustable nut to secure the unit.
Note: lights do not provide power to one
another. Each light must be charged and
switched ON/OFF individually.
Ship your unit, freight pre-paid, including
reasonable proof of date and place of purchase
and description of problem to:
Attn: Customer Service
c/o Sima Products
Bldg. #5
140 Pennsylvania Ave.
Oakmont, PA 15139
This package includes:
1- SL-20IR video light
1 - AC adapter
1 - video bracket
1 - user manual (this document)
This warranty is void if any defects are caused by abuse,
misuse, negligence or unauthorized repairs. All liability for
incidental or consequential damages is specifically
excluded. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. This
warranty gives you specific legal right and you may also
have other rights which vary from state to state.
Model SL-20IR
Light up the night
Printing instructions:
•
•
•
•
•
Manual is to be printed two-sided in black ink on white paper.
Size before folding is 4.25” x 11”.
Finished size (after folding) is 2.75” x 4.25”.
Manual is folded so that front cover with Sima logo and picture of SL-10L is showing.
Manual is to be inserted inside package.
|