Sony BDV E980 User Manual

4-261-380-13(1)  
Blu-ray Disc/DVD  
Home Theatre  
System  
Operating Instructions  
BDV-E980/BDV-E880/BDV-E580/BDV-T58  
13) Unplug this apparatus during  
lightning storms or when  
recommends that all viewers take  
regular breaks while watching 3D  
video images. The length and  
frequency of necessary breaks will  
vary from person to person. You  
must decide what works best. If you  
experience any discomfort, you  
should stop watching the 3D video  
images until the discomfort ends;  
consult a doctor if you believe  
necessary. You should also review  
(i) the instruction manual and/or the  
caution message of any other  
device used with, or Blu-ray Disc  
contents played with this product  
and (ii) our website (http://  
esupport.sony.com/) for the latest  
information. The vision of young  
children (especially those under six  
years old) is still under  
Important Safety  
Instructions  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
unused for long periods of time.  
14) Refer all servicing to qualified  
service personnel. Servicing is  
required when the apparatus  
has been damaged in any way,  
such as power-supply cord or  
plug is damaged, liquid has  
been spilled or objects have  
fallen into the apparatus, the  
apparatus has been exposed to  
rain or moisture, does not  
operate normally, or has been  
dropped.  
4) Follow all instructions.  
5) Do not use this apparatus near  
water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation  
openings. Install in accordance  
with the manufacturer’s  
instructions.  
8) Do not install near any heat  
sources such as radiators, heat  
registers, stoves, or other  
apparatus (including  
amplifiers) that produce heat.  
9) Do not defeat the safety  
purpose of the polarized or  
grounding-type plug. A  
The nameplate and the date of  
manufacture marking are located  
on the bottom exterior.  
development. Consult your doctor  
(such as a pediatrician or eye  
For the customers in  
Mexico and Latin  
America  
To reduce the risk of fire or electric  
shock, do not expose this apparatus  
to dripping or splashing, and do not  
place objects filled with liquids,  
such as vases, on the apparatus.  
doctor) before allowing young  
children to watch 3D video images.  
Adults should supervise young  
children to ensure they follow the  
recommendations listed above.  
polarized plug has two blades  
with one wider than the other. A  
grounding type plug has two  
blades and a third grounding  
prong. The wide blade or the  
third prong are provided for  
your safety. If the provided  
plug does not fit into your  
outlet, consult an electrician for  
replacement of the obsolete  
outlet.  
For the Blu-ray Disc/  
DVD receiver (HBD-  
E580/HBD-T58)  
(For the customers in  
the U.S.A.)  
The nameplate is located on the  
bottom exterior.  
Precautions  
10) Protect the power cord from  
being walked on or pinched  
particularly at plugs,  
This equipment must not be co-  
located or operated in conjunction  
with any other antenna or  
transmitter.  
On power sources  
• The unit is not disconnected from  
the mains as long as it is  
connected to the AC outlet, even  
if the unit itself has been turned  
off.  
convenience receptacles, and  
the point where they exit from  
the apparatus.  
11) Only use attachments/  
accessories specified by the  
manufacturer.  
This equipment complies with FCC  
radiation exposure limits set forth  
for an uncontrolled environment  
and meets the FCC radio frequency  
(RF) Exposure Guidelines in  
Supplement C to OET65.  
• As the main plug is used to  
disconnect the unit from the  
mains, connect the unit to an  
easily accessible AC outlet.  
Should you notice an abnormality  
in the unit, disconnect the main  
plug from the AC outlet  
immediately.  
12) Use only with the cart, stand,  
tripod, bracket, or table  
specified by the manufacturer,  
or sold with the apparatus.  
When a cart is used, use caution  
when moving the cart/  
apparatus combination to avoid  
injury from tip-over.  
This equipment should be installed  
and operated keeping the radiator at  
least 20cm or more away from  
person’s body (excluding  
extremities: hands, wrists, feet and  
ankles).  
On watching 3D video  
images  
Some people may experience  
discomfort (such as eye strain,  
fatigue, or nausea) while watching  
3D video images. Sony  
US  
3
LLC in the United States and  
other countries.  
Copy Protection  
Please be advised of the advanced  
• Java is a trademark of Oracle and/  
or its affiliates.  
content protection systems used in  
both Blu-ray Disc and DVD  
TM  
• “BD-LIVE” and  
media. These systems, called  
AACS (Advanced Access Content  
System) and CSS (Content  
• The Wi-Fi CERTIFIED™ Logo  
is a certification mark of the  
Wi-Fi Alliance.  
“BONUSVIEW” are trademarks  
of Blu-ray Disc Association.  
• “Blu-ray Disc” is a trademark.  
• “Blu-ray Disc,” “DVD+RW,”  
“DVD-RW,” “DVD+R,” “DVD-  
R,” “DVD VIDEO,” and “CD”  
logos are trademarks.  
Scramble System), may contain  
some restrictions on playback,  
analog output, and other similar  
features. The operation of this  
product and the restrictions placed  
may vary depending on the date of  
purchase, as the governing board of  
the AACS may adopt or change its  
restriction rules after the time of  
purchase.  
• The Wi-Fi Protected Setup™  
Mark is a mark of the Wi-Fi  
Alliance.  
• “Wi-Fi CERTIFIED™” and “Wi-  
Fi Protected Setup™” are  
trademarks of the Wi-Fi Alliance.  
• “PhotoTV HD” and the “PhotoTV  
HD” logo are trademarks of Sony  
Corporation.  
• “Blu-ray 3D” and “Blu-ray 3D”  
logo are trademarks of Blu-ray  
Disc Association.  
• “BRAVIA” is a trademark of  
Sony Corporation.  
• MPEG Layer-3 audio coding  
technology and patents licensed  
from Fraunhofer IIS and  
Thomson.  
• “AVCHD” and the “AVCHD”  
logo are trademarks of Panasonic  
Corporation and Sony  
Copyrights and  
Trademarks  
• This system incorporates with  
Dolby* Digital and Dolby Pro  
Logic (II) adaptive matrix  
surround decoder and the DTS**  
Digital Surround System.  
* Manufacturedunder license  
from Dolby Laboratories.  
Dolby, Pro Logic, and the  
double-D symbol are  
Corporation.  
• iPhone, iPod, iPod classic, iPod  
nano, and iPod touch are  
trademarks of Apple Inc.,  
registered in the U.S. and other  
countries.  
, “XMB,” and “xross media  
bar” are trademarks of Sony  
Corporation and Sony Computer  
Entertainment Inc.  
• “PLAYSTATION” is atrademark  
of Sony Computer Entertainment  
Inc.  
• Music and video recognition  
technology and related data are  
provided by Gracenote .  
trademarks of Dolby  
Laboratories.  
®
• “Made for iPod,” and “Made for  
iPhone” mean that an electronic  
accessory has been designed to  
connect specifically to iPod or  
iPhone, respectively, and has been  
certified by the developer to meet  
Apple performance standards.  
Apple is not responsible for the  
operation of this device or its  
compliance with safety and  
regulatory standards. Please note  
that the use of this accessory with  
iPod or iPhone may affect  
**Manufacturedunder license  
under U.S. Patent #’s:  
5,451,942; 5,956,674;  
5,974,380; 5,978,762;  
6,226,616; 6,487,535;  
Gracenote is the industry standard  
in music recognition technology  
and related content delivery. For  
more information, please visit  
CD, DVD, Blu-ray Disc, and  
music and video-related data from  
Gracenote, Inc., copyright ©  
2000-present Gracenote.  
Gracenote Software, copyright ©  
2000-present Gracenote. One or  
more patents owned by Gracenote  
apply to this product and service.  
See the Gracenote website for a  
nonexhaustive list of applicable  
Gracenote patents. Gracenote,  
CDDB, MusicID, MediaVOCS,  
the Gracenote logo and logotype,  
and the “Powered by Gracenote”  
logo are either registered  
7,212,872; 7,333,929;  
7,392,195; 7,272,567 &  
other U.S. and worldwide  
patents issued & pending.  
DTS, DTS-HD and the  
Symbol are registered  
trademarks, & DTS-HD  
Master Audio, and the DTS  
logos are trademarks of  
DTS, Inc. Product includes  
software. © DTS, Inc. All  
Rights Reserved.  
wireless performance.  
• Windows Media is either a  
registered trademark or trademark  
of Microsoft Corporation in the  
United States and/or other  
• This system incorporates High-  
Definition Multimedia Interface  
countries.  
This product contains technology  
subject to certain intellectual  
property rights of Microsoft. Use  
or distribution of this technology  
outside of this product is  
TM  
(HDMI ) technology.  
HDMI, the HDMI logo and High-  
Definition Multimedia Interface  
are trademarks or registered  
trademarks or trademarks of  
Gracenote in the United States  
and/or other countries.  
trademarks of HDMI Licensing  
prohibited without the appropriate  
US  
4
 
license(s) from Microsoft.  
Content owners use Microsoft  
PlayReady content access  
About These  
Operating  
Instructions  
• The instructions in these  
Operating Instructions  
describe the controls on the  
remote. You can also use the  
controls on the unit if they  
have the same or similar  
names as those on the remote.  
• In this manual, “disc” is used  
as a general reference for  
BDs, DVDs, Super Audio  
CDs, or CDs unless otherwise  
specified by the text or  
illustrations.  
• The instructions in this  
manual are for BDV-E580,  
BDV-E880, BDV-E980, and  
BDV-T58. BDV-E580 is the  
model used for illustration  
purposes. Any difference in  
operation is clearly indicated  
in the text, for example,  
“BDV-E580 only.”  
technology to protect their  
intellectual property, including  
copyrighted content. This device  
uses PlayReady technology to  
access PlayReady-protected  
content and/or WMDRM-  
protected content. If the device  
fails to properly enforce  
restrictions on content usage,  
content owners may require  
Microsoft to revoke the device’s  
ability to consume PlayReady-  
protected content. Revocation  
should not affect unprotected  
content or content protected by  
other content access technologies.  
Content owners may require you  
to upgrade PlayReady to access  
their content. If you decline an  
upgrade, you will not be able to  
access content that requires the  
upgrade.  
®
• DLNA , the DLNA Logo and  
DLNA CERTIFIED are  
trademarks, service marks, or  
certification marks of the Digital  
Living Network Alliance.  
• All other trademarks are  
trademarks of their respective  
owners.  
• Some illustrations are  
presented as conceptual  
drawings, and may be  
different from the actual  
products.  
• Other system and product names  
are generally trademarks or  
registered trademarks of the  
manufacturers. ™ and ® marks  
are not indicated in this document.  
• The items displayed on the  
TV screen may vary  
depending on the area.  
• The default setting is  
underlined.  
US  
5
 
Table of Contents  
Step 3: Connecting to the  
Network....................................27  
Step 4: Performing the Easy  
Setup ........................................29  
Step 6: Enjoying Surround  
Sound.......................................31  
Selecting the Effect to Suit  
the Source .......................................43  
Selecting the Audio Format, Multilingual  
Tracks, or Channel..........................43  
Enjoying Multiplex Broadcast  
Sound..............................................44  
Using the Control for HDMI Function for  
“BRAVIA” Sync ............................47  
Calibrating the Appropriate Settings  
Automatically .................................48  
Deactivating the Buttons on  
the Unit ...........................................51  
Controlling Your TV with the Supplied  
Remote............................................51  
Changing the Brightness of the Front  
Panel Display..................................51  
US  
6
Unpacking  
BDV-E580/BDV-T58  
• Front speakers (2)  
• Speaker cords (5, red/white/  
green/gray/blue)  
• HDMI cable (1)  
(BDV-T58 only)  
• Surround speakers (2)  
• FM wire antenna (aerial) (1)  
• Dock for iPod/iPhone  
(TDM-iP30) (1)  
or  
• Video cord (1)  
• Center speaker (1)  
• Subwoofer (1)  
• USB cable (1)  
• Remote commander  
(remote) (1)  
• Operating Instructions  
• Quick Setup Guide  
• Speaker Installation Guide  
• Software License  
• R6 (size AA) batteries (2)  
• Calibration mic (1)  
Information  
• Easy Setup Disc (DVD)  
US  
7
 
BDV-E880  
• Front speakers (2)  
• Speaker cords (5, red/white/  
green/gray/blue)  
• FM wire antenna (aerial) (1)  
or  
• Remote commander  
(remote) (1)  
• Speaker-bottom covers (2)  
• Bases (2)  
• R6 (size AA) batteries (2)  
• Calibration mic (1)  
• Surround speakers (2)  
• Lower parts of the front  
speakers (2)  
• HDMI cable (1)  
• Center speaker (1)  
• Subwoofer (1)  
• Screws (silver) (2)  
• Screws (black) (6)  
• Operating Instructions  
• Quick Setup Guide  
• Speaker Installation Guide  
• Software License  
Information  
US  
8
BDV-E980  
• Front speakers (2)  
• Speaker cords (5, red/white/  
green/gray/blue)  
• FM wire antenna (aerial) (1)  
or  
• Remote commander  
(remote) (1)  
• Speaker-bottom covers (4)  
• Bases (4)  
• R6 (size AA) batteries (2)  
• Calibration mic (1)  
• Surround speakers (2)  
• Lower parts of the front and  
surround speakers (4)  
• HDMI cable (1)  
• Operating Instructions  
• Quick Setup Guide  
• Speaker Installation Guide  
• Software License  
Information  
• Center speaker (1)  
• Subwoofer (1)  
• Screws (silver) (4)  
• Screws (black) (12)  
US  
9
Preparing the remote  
Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the  
markings inside the compartment.  
US  
10  
Index to Parts and Control  
For more information, refer to the pages indicated in parentheses.  
Front panel  
VOL  
VOL  
FUNCTION  
A Front panel display  
C
(USB) port (page 35)  
Used for connecting a USB device.  
B Soft-touch buttons/indicators  
D Power indicator  
Z (open/close) (page 34)  
Lights up while the system is turned on.  
Opens or closes the disc tray.  
E Disc tray (page 34)  
N (play)  
Starts or re-starts playback (resume play).  
Plays a slideshow when a disc containing  
JPEG image files is inserted.  
F
"/1 (on/standby)/Remote sensor  
Turns on the unit, or sets it to standby mode.  
About soft-touch buttons/  
indicators  
These buttons function when the soft-touch  
x (stop)  
Stops playback and remembers the stop  
point (resume point).  
button indicators are lit.  
The resume point for a title/track is the last  
point you played or the last photo for a  
photo folder.  
You can turn on/off the indicators by setting  
[Illumination/Display] (page 61). When you set  
[Illumination/Display] to [Simple/Off], the  
indicators turn off. In this case, touch any soft-  
touch button. When the indicators light up,  
touch the desired button.  
VOL +/–  
Adjusts the system’s volume.  
FUNCTION  
Selects the playback source.  
• These buttons work when you touch them lightly. Do  
not press on them with excessive force.  
US  
11  
   
Front panel display  
About the indications in the front panel display  
A Displays the system’s playing status.  
F Lights up when muting is on.  
B Lights up when repeat play is  
G Displays the system’s status, such as  
activated.  
radio frequency, etc.  
C Lights up when stereo sound is  
H Lights up when outputting 720p/1080i/  
1080p video signals from the HDMI  
(OUT) jack or 720p/1080i video signals  
from the COMPONENT VIDEO OUT  
jacks.  
received. (Radio only)  
D Lights up when the system is playing  
via the PARTY STREAMING function.  
E Lights up when the HDMI (OUT) jack is  
correctly connected to an HDCP (High-  
bandwidth Digital Content Protection)-  
compliant device with HDMI or DVI  
(Digital Visual Interface) input.  
US  
12  
 
Rear panel  
SPEAKERS  
COMPONENT VIDEO OUT  
DIGITAL IN  
COAXIAL  
SAT/  
CABLE  
DIGITAL IN  
OPTICAL  
L
FRONT  
R
FRONT  
SUR  
L
SUBWOOFER  
SUR  
CENTER  
Y
P
B
PR  
AUDIO IN  
ECM-AC2  
R
L
FM  
COAXIAL  
75  
OUT  
ARC  
IN  
1
IN  
2
R
LAN (100)  
VIDEO OUT  
TV  
AUDIO  
A.CAL MIC  
ANTENNA  
A SPEAKERS jacks (page 20)  
G AUDIO (AUDIO IN L/R) jacks (page 24)  
B COMPONENT VIDEO OUT jacks (page  
H TV (DIGITAL IN OPTICAL) jack (page  
C
(USB) port (page 35)  
I LAN (100) terminal (page 27)  
J HDMI (IN 2) jack (page 24)  
K HDMI (IN 1) jack (page 24)  
L HDMI (OUT) jack (page 22)  
M VIDEO OUT jack (page 22)  
D SAT/CABLE (DIGITAL IN COAXIAL)  
jack (page 24)  
E ANTENNA (FM COAXIAL 75Ω) jack  
F A.CAL MIC jack (pages 29, 48)  
US  
13  
 
B Number buttons (pages 46, 51)  
Enters the title/chapter numbers, preset  
station number, etc.  
Remote control  
Selects the audio format/track.  
SPEAKERS  
TV AUDIO  
TV  
1
SUBTITLE (page 60)  
BRAVIA Sync  
DIMMER  
SLEEP  
Selects the subtitle language when  
multilingual subtitles are recorded on a BD-  
ROM/DVD VIDEO.  
1
4
7
2
5
8
3
6
9
FUNCTION  
2
3
4
9
SUBTITLE  
C Color buttons (yellow/blue/red/green)  
Short cut keys for selecting items on some  
BD menus (can also be used for Java  
interactive operations on BDs).  
FAVORITES AUDIO  
0
RED  
YELLOW  
BLUE  
GREEN  
TOP MENU  
POP UP/ MENU  
D TOP MENU  
Opens or closes the BD’s or DVD’s Top  
Menu.  
RETURN  
OPTIONS  
POP UP/MENU  
Opens or closes the BD-ROM’s Pop-up  
Menu, or the DVD’s menu.  
SOUND MODE  
SOUND MODE  
5
6
HOME  
PRESET  
TUNING  
DISPLAY  
REPLAY ADVANCE PRESET  
PLAY  
TUNING  
STOP  
OPTIONS (pages 31, 41. 52)  
PAUSE  
Displays the options menu on the TV screen  
or in the front panel display. (The location  
differs based on the selected function.)  
8
VOL TV VOL  
MUTING  
TV INPUT  
7
RETURN  
Returns to the previous display.  
C/X/x/c  
Number 5, AUDIO, VOL +, and N buttons  
have a tactile dot. Use the tactile dot as a  
reference when operating the remote.  
Moves the highlight to a displayed item.  
(enter)  
Enters the selected item.  
: For TV operations  
E SOUND MODE +/– (page 43)  
Selects the sound mode.  
Enters or exits the system’s home menu.  
A
Z (open/close)  
Opens or closes the disc tray.  
SPEAKERS TVyAUDIO  
Selects whether TV sound is output from  
the system’s speakers or the TV’s  
speaker(s). This function works only when  
you set [Control for HDMI] to [On]  
TV "/1 (on/standby) (page 51)  
Turns on the TV or sets it to standby mode.  
"/1 (on/standby) (pages 29, 45)  
Turns on the system or sets it to standby  
mode.  
US  
14  
 
F Playback operation buttons  
H DISPLAY (pages 34, 38, 52)  
Displays playback and web browsing  
information on the TV screen.  
./> (previous/next)  
Skip to the previous/next chapter, track, or  
file.  
Displays the preset radio station, frequency,  
etc., in the front panel display.  
Displays the stream information/decoding  
status in the front panel display when the  
function is set to other than “BD/DVD,”  
“FM,” and “AUDIO.” When the system is  
set to the “HDMI1,” “HDMI2,” “TV,” or  
“SAT/CABLE” function, the stream  
information/decoding status appears only  
when a digital signal is input.  
(replay/advance)  
Briefly replay the current scenes for 10  
seconds./Briefly fast forwards the current  
scenes for 15 seconds.  
m/M (fast/slow/freeze frame)  
Fast reverse/fast forward the disc during  
playback. Each time you press the button,  
the search speed changes.  
The stream information/decoding status  
may not appear depending on the stream or  
item being decoded.  
Activates slow-motion play when pressed  
for more than one second in pause mode.  
Plays one frame at a time when pressed in  
pause mode.  
I DIMMER (page 51)  
Changes the brightness of the front panel  
display.  
Slow-motion and single-frame playback are  
not available for Blu-ray 3D Discs.  
SLEEP (page 50)  
Sets the sleep timer.  
N (play)  
Starts or re-starts playback (resume play).  
Activates One-Touch Play (page 47) when  
the system is on and set to the “BD/DVD”  
function.  
FUNCTION (pages 30, 45)  
Selects the playback source.  
FAVORITES  
Displays the Internet contents added to the  
Favorites List. You can save 18 favorite  
Internet contents.  
X (pause)  
Pauses or re-starts playback.  
x (stop)  
Stops playback and remembers the stop  
point (resume point). The resume point for  
a title/track is the last point you played or  
the last photo for a photo folder.  
Radio operation buttons  
PRESET +/–  
TUNING +/–  
G MUTING  
Turns off the sound temporarily.  
VOL +/– (page 45)  
Adjusts the volume.  
TV VOL +/–  
Adjusts the TV volume.  
TV INPUT  
Switches the TV’s input source between the  
TV and other input sources.  
US  
15  
Getting Started  
Step 1: Installing the System  
How to position the system  
Install the system by referring to the illustration below.  
A Front speaker (L (left))  
B Front speaker (R (right))  
C Center speaker  
A
B
F
D Surround speaker (L (left))  
E Surround speaker (R (right))  
F Subwoofer  
C
G
G Unit  
D
E
• Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed,  
oiled, polished, etc.) floor, as staining or discoloration may result.  
• Do not lean or hang on a speaker, as it may fall down.  
• To assemble the speakers, refer to the supplied “Speaker Installation Guide.” (BDV-E880/BDV-E980 only)  
• You can install the speakers on a wall. For details, refer to the supplied “Speaker Installation Guide.”  
US  
16  
   
About the subwoofer’s speaker cord  
(BDV-E980 only)  
You can arrange the subwoofer’s speaker cord by changing which direction it protrudes from the  
bottom of the subwoofer.  
Bottom of the subwoofer  
When packing is opened:  
Speaker cord is connected.  
• To avoid short-circuiting the speakers, make sure that the speaker cord connection is not like the following  
examples. If there is a problem, correct it.  
Examples of an improper speaker cord connection  
Stripped speaker cord is touching  
another speaker terminal  
Stripped cords are touching each other  
due to excessive removal of insulation  
US  
17  
When installing the subwoofer with the wide side facing forward  
Toward the listening position  
1
2
Secure the speaker cord in the speaker cord holder to the right of the speaker terminal.  
Speaker cord holder to the  
right of the speaker terminal  
Speaker cord  
Thread the speaker cord through the gap along the side of the subwoofer.  
Gap  
US  
18  
When installing the subwoofer with the narrow side facing forward  
Toward the listening position  
1
2
Secure the speaker cord in the speaker cord holder to the left of the speaker terminal.  
Speaker cord holder to the left of  
the speaker terminal  
Speaker cord  
Thread the speaker cord through the gap along the side of the subwoofer.  
Gap  
US  
19  
Step 2: Connecting the System  
For connecting the system, read the information on the following pages.  
Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other  
connections are made.  
To assemble the speakers, refer to the supplied “Speaker Installation Guide.” (BDV-E880/BDV-E980  
only)  
• When you connect another component with a volume control, turn down the volume of the other components to a  
level where sound is not distorted.  
Connecting the speakers  
To connect speaker cords to the speaker  
You need to connect a speaker cord to each of the front, center, and surround speakers.  
The connector of the speaker cords and the color tube are color-coded based on the speaker type.  
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with  
the color tube to 3, and the speaker cord without the color tube to #. Do not catch the speaker cord  
insulation (rubber covering) in the speaker terminals.  
Rear or bottom of the speaker  
Color tube  
(+)  
(–)  
Connector  
US  
20  
   
To connect speaker cords to the unit  
Connect the speaker cords to match the color of the SPEAKERS jacks of the unit.  
When connecting to the unit, insert the connector until it clicks.  
White  
(Front left  
speaker (L))  
Purple  
(Subwoofer)  
Red  
(Front right  
speaker (R))  
Green  
(Center speaker)  
Rear panel of the unit  
SEAKERS  
FRONT  
R
FRONT  
SUR  
L
SUBWOOFER  
SUR  
CENTER  
R
L
Gray  
Blue  
(Surround right  
speaker (R))  
(Surround left  
speaker (L))  
US  
21  
Connecting the TV  
Connect the system to your TV to display the image of the system on your TV, and listen to TV sound  
via the system’s speakers.  
Depending on the jacks and functions on your TV, select the connection method.  
• When your TV has an HDMI jack that is marked “ARC1)”: Connection A  
• When your TV has an HDMI jack: Connections A and D  
• When your TV has component video input jacks: Connections B and D  
• When your TV does not have jacks above: Connections C and D  
Video connections  
Audio connection  
A
B
C
D
HDMI cable2)  
Video cord  
(not supplied)  
Digital optical cord  
(not supplied)  
Component  
video cable  
(not supplied)  
Image quality  
TV  
HDMI IN  
COMPONENT VIDEO IN  
VIDEO IN  
DIGITAL OUT  
OPTICAL  
Y
PB  
PR  
Green  
Red  
Blue  
Yellow  
Signal flow  
: Video signal  
or  
3)  
or  
A
B
C
D
: Audio signal  
Blue  
Yellow  
Green  
Red  
Rear panel of the unit  
COMPONNT VIDEO OUT  
DIGITAL IN  
OPTICAL  
Y
P
B
PR  
OUT  
ARC  
IN  
1
IN  
2
VIDEO OUT  
TV  
1)Audio Return Channel. For details, see “About Audio Return Channel” (page 23).  
2)The HDMI cable is supplied with BDV-E880/BDV-E980/BDV-T58 only.  
3)Available only when your TV is compatible with the Audio Return Channel function.  
US  
22  
   
A HDMI cable connection  
If your TV has an HDMI jack, connect to the TV with an HDMI cable. This will provide better image  
quality compared to other types of connections.  
When connecting with an HDMI cable, you need to select the type of output signal when performing  
the Easy Setup (page 29).  
For further HDMI settings, see “[HDMI Settings]” (page 61).  
About Audio Return Channel  
If your TV is compatible with the Audio Return Channel function, an HDMI cable connection also  
sends a digital audio signal from the TV. You do not need to make a separate audio connection for  
listening to TV sound. For setting the Audio Return Channel function, see [Audio Return Channel]  
B Component video cable connection  
If your TV does not have an HDMI jack, but has component video input jacks, connect to the TV with  
a component video cable. Picture quality will be improved compared to using a video cord connection.  
When connecting with a component video cable, you need to select the type of output signal in the Easy  
Setup (page 29).  
C Video cord connection  
If your TV does not have an HDMI jack or a component video input jack, make this connection.  
D Digital optical cord connection  
This connection sends an audio signal to the system from the TV. To listen to TV sound via the system,  
perform this connection. With this connection, the system receives a Dolby Digital multiplex broadcast  
signal and you can enjoy multiplex broadcast sound.  
• You can enjoy the TV sound by selecting the “TV” function (page 30).  
• If your TV does not have a digital optical output jack, you can connect the unit and your TV with an audio cord for  
listening to TV sound via the system. For connection details, see “Connecting the other components” (page 24).  
US  
23  
 
Connecting the other components  
When a component you wish to connect to the system has an HDMI  
(OUT) jack  
You can connect a component that has an HDMI (OUT) jack such as a set-top box/digital satellite  
®
receiver or PLAYSTATION 3, etc., with an HDMI cable. An HDMI cable connection can send both  
video and audio signals. By connecting the system and the component using an HDMI cable, you can  
enjoy high-quality digital picture and sound via the HDMI (IN 1) or HDMI (IN 2) jack.  
Rear panel of the unit  
OUT  
ARC  
IN  
1
IN  
2
or  
HDMI cable (not supplied)  
To the HDMI OUT jack of the set-top box/  
digital satellite receiver or  
PLAYSTATION®3, etc.  
HDMI OUT  
• Video signals from the HDMI (IN 1/ 2) jacks are sent to the HDMI (OUT) jack only when the “HDMI1” or  
“HDMI2” function is selected.  
• To send an audio signal from the HDMI (IN 1/ 2) jacks to the HDMI (OUT) jack, you may need to change the audio  
output setting. For details, see [Audio Output] in [Audio Settings] (page 59).  
US  
24  
   
When the component does not have an HDMI OUT jack  
Connect the system so that video signals from the system and other component are sent to the TV, and  
audio signals from the component are sent to the system as follows.  
TV  
Video out  
Component  
Audio out  
Signal flow  
System  
: Video signal  
: Audio signal  
If the component plays sound only, connect the audio output of the component to the system.  
Depending on the jacks on the component, select the connection method.  
• Component which has a digital coaxial output jack: A  
• Component which does not have a digital coaxial output jack: B  
Rear panel of the unit  
DIGITAL IN  
COAXIAL  
SAT/  
CABLE  
L
AUDIO IN  
AUDIO  
: Signal flow  
White  
Red  
A Digital coaxial cord  
(not supplied)  
B Audio cord  
(not supplied)  
Red  
White  
To the audio out jacks of the VCR, digital  
satellite receiver, PlayStation, or  
portable audio source, etc.  
To the digital coaxial out jack  
of the VCR or digital satellite  
receiver, etc.  
COAXIAL  
L
R
DIGITAL OUT  
AUDIO OUT  
• If you make connection above, set [Control for HDMI] in [HDMI Settings] of [System Settings] to [Off] (page 61).  
• You can enjoy component sound by selecting the “SAT/CABLE” function for connection A, or the “AUDIO”  
function for connection B (page 30).  
US  
25  
Connecting the antenna (aerial)  
Rear panel of the unit  
FM  
COAXIAL  
75  
ANTENA  
FM wire antenna (aerial)  
(supplied)  
or  
• Be sure to fully extend the FM wire antenna (aerial).  
• After connecting the FM wire antenna (aerial), keep it as horizontal as possible.  
• If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the unit to an outdoor FM  
antenna (aerial).  
US  
26  
 
Step 3: Connecting to the Network  
• To connect the system to your network, you need to make network settings that suit your usage environment and  
For BDV-E580/BDV-T58  
Select the method based on your LAN (Local Area Network) environment.  
• If you use a wireless LAN  
The system has built-in Wi-Fi, and you can connect the system to the network by making the network  
settings.  
• If you use other than a wireless LAN  
Connect to the network by making a LAN cable connection as follows.  
Internet  
LAN 00)  
Rear panel of the unit  
ADSL modem/  
cable modem  
Broadband router  
ETHER  
WAN  
LAN  
1
LAN  
2
LAN  
3
LAN  
4
LAN cable  
(not supplied)  
• The placement distance between the unit and your wireless LAN router differs based on your usage environment.  
If the system cannot connect to the network or the network connection is unstable, place the unit and the wireless  
LAN router closer to each other. When you cannot place the unit and the wireless LAN router closer to each other,  
use the optional USB Wireless LAN Adapter (Sony UWA-BR100* only).  
• To connect to a wireless LAN using a 5 GHz frequency band, you need the optional USB Wireless LAN Adapter  
(Sony UWA-BR100* only).  
* As of November 2010. The USB Wireless LAN Adapter may not be available in some regions/countries.  
• You can also get information for network settings from the following Sony support page:  
For customers in the U.S.:  
For customers in Canada:  
For customers in Mexico and Latin America:  
http://esupport.sony.com/LA  
US  
27  
   
For other models  
Select the method based on your LAN (Local Area Network) environment.  
Rear panel of the unit  
Internet  
2
LAN 00)  
1
ADSL modem/  
cable modem  
Broadband router  
ETHER  
WAN  
LAN  
1
LAN  
2
LAN  
3
LAN  
4
USB  
WirelessLAN  
Adapter  
(not supplied)  
LAN cable  
(not supplied)  
1 Wired Setup  
Use a LAN cable to connect to the LAN (100) terminal on the unit.  
2 USB Wireless Setup  
Use a wireless LAN via the USB Wireless LAN Adapter (Sony UWA-BR100* only).  
The USB Wireless LAN Adapter may not be available in some regions/countries.  
* As of November 2010.  
Turn the unit off before connecting the extension cable or inserting the USB Wireless LAN Adapter.  
After inserting the USB Wireless LAN Adapter to the base and connecting the extension cable to the  
(USB) port (front or rear), turn the unit on again.  
• The placement distance between the USB Wireless LAN Adapter and your wireless LAN router differs based on  
your usage environment. If the system cannot connect to the network or the network connection is unstable, move  
the USB Wireless LAN Adapter to a different position or place the USB Wireless LAN Adapter and the wireless  
LAN router closer to each other.  
• You can also get information for network settings from the following Sony support page:  
For customers in the U.S.:  
For customers in Canada:  
For customers in Mexico and Latin America:  
http://esupport.sony.com/LA  
US  
28  
2
Connect the calibration mic to the  
A.CAL MIC jack on the rear panel.  
Step 4: Performing the  
Easy Setup  
Set up the calibration mic at ear level using  
a tripod, etc. (not supplied). The front of  
each speaker should face the calibration  
mic, and there should be no obstruction  
between the speakers and the calibration  
mic.  
Before performing Step 4  
Make sure all connections are secure, and then  
connect the AC power cord (mains lead).  
Follow the Steps below to make the basic  
adjustments for using the system.  
Displayed items vary depending on the country  
model.  
2
C
-A  
M
"/1  
C
E
1
4
7
2
5
8
0
3
6
9
A.CAL MIC  
C/X/x/c,  
HOME  
Calibration mic  
1
Turn on the TV.  
3
4
Press [/1.  
Switch the input selector on your TV so  
that the signal from the system  
appears on the TV screen.  
The Easy Setup Display for OSD language  
selection appears.  
US  
29  
         
5
Perform the [Easy Setup]. Follow the  
on-screen instructions to make the  
basic settings using C/X/x/c, and  
Step 5: Selecting the  
Source  
.
Depending on the connection method  
(page 22), perform the following setting.  
• HDMI cable connection: Follow the  
You can select the playback source.  
instructions that are displayed on the TV  
screen.  
• Component video cable connection:  
Select the picture quality. The available  
settings are as follows, from lowest to  
highest picture quality: 480i*, 480p**,  
720p, and 1080i.  
1
4
7
2
5
8
0
3
6
9
FUNCTION  
* 480i/576i for Mexican and Latin American  
models.  
**480p/576p for Mexican and Latin American  
models.  
Press FUNCTION repeatedly until the  
desired function appears in the front panel  
display.  
• BD-ROM playback of protected content via  
component video output is only supported at  
480i* output resolution. For details, see “Copy  
Each time you press FUNCTION, the function  
changes as follows.  
* 480i/576i for Mexican and Latin American  
models.  
“BD/DVD” t “FM” t “HDMI1” t  
“HDMI2” t“TV” t “SAT/CABLE” t  
“AUDIO” t “BD/DVD” t …  
• Video cord connection: Select [16:9] or  
[4:3] so that the picture is displayed  
correctly.  
Function  
Source  
“BD/DVD”  
Disc, USB device, iPod/iPhone, or  
network device to be played by the  
system  
For details about [Auto Calibration]  
settings in [Easy Setup], see “Calibrating  
“FM”  
“HDMI1”/  
“HDMI2”  
Component that is connected to  
the HDMI (IN 1) or HDMI (IN 2)  
jack on the rear panel (page 24)  
To recall the Easy Setup Display  
1
Press HOME.  
“TV”  
Component (TV, etc.) that is  
connected to the TV (DIGITAL  
IN OPTICAL) jack on the rear  
panel, or a TV compatible with the  
Audio Return Channel function  
that is connected to the HDMI  
(OUT) jack on the rear panel  
The home menu appears on the TV screen.  
2
3
Press C/c to select  
Press X/x to select [Easy Setup], then  
press  
[Setup].  
.
4
Press C/c to select [Start], then press  
.
“SAT/CABLE” Component that is connected to  
the SAT/CABLE (DIGITAL IN  
COAXIAL) jack on the rear panel  
The Easy Setup Display appears.  
“AUDIO”  
Component that is connected to  
the AUDIO (AUDIO IN L/R)  
jacks on the rear panel (page 24)  
US  
30  
     
Step 6: Enjoying Surround Sound  
After performing the previous Steps and starting playback, you can easily enjoy surround sound. You  
can also select pre-programmed surround settings that are tailored to different kinds of sound sources.  
They bring the exciting and powerful sound of movie theaters into your home.  
1
4
7
2
5
8
0
3
6
9
X/x/c,  
OPTIONS  
Selecting surround settings based on your listening preference  
The setting method differs depending on the function.  
When playing via the “BD/DVD”* or “FM” function  
1
Press OPTIONS.  
The option menu appears on the TV screen.  
2
3
Press X/x to select [Surround Setting], then press  
.
Press X/x repeatedly until the surround setting you want appears on the TV screen.  
See the table below for surround sound setting descriptions.  
4
Press  
.
The setting is made.  
* Surround sound settings do not apply to Internet content.  
When playing via the “HDMI1,” “HDMI2,” “TV,” “SAT/CABLE,” or  
“AUDIO” function  
1
Press OPTIONS.  
The option menu appears in the front panel display.  
2
3
Press X/x repeatedly until “SUR. SET” appears in the front panel display, then press  
or c.  
Press X/x repeatedly until the surround setting you want appears in the front panel  
display.  
See the table below for surround sound setting descriptions.  
4
Press  
.
The setting is made.  
US  
31  
     
5
Press OPTIONS.  
The option menu in the front panel display turns off.  
About speaker output of each surround setting  
The table below describes the options when you connect all the speakers to the unit.  
The default setting is [A.F.D. Multi] (“A.F.D. MULTI”).  
Sound from  
Surround setting  
Effect  
Depending on the source.  
[A.F.D. Standard]  
“A.F.D. STD”  
The system discriminates the sound format of the source and  
presents sound as it was recorded/encoded.  
(AUTO FORMAT  
DIRECT STANDARD)  
[A.F.D. Multi]  
“A.F.D. MULTI”  
• 2 channel source: The system simulates surround sound  
from 2 channel sources and outputs sound from the 5.1  
channel speakers by duplicating 2 channel source sound  
across each speaker.  
(AUTO FORMAT  
DIRECT MULTI)  
• Multi-channel source: The system outputs sound from the  
speakers depending on the number of channels of the  
source.  
• [Dolby Pro Logic]  
“PRO LOGIC”  
• 2 channel source: The system simulates surround sound  
from 2 channel sources and outputs sound from the 5.1  
channel speakers.  
• [Dolby PL II Movie]  
“PLII MOVIE”  
– [Dolby Pro Logic] (“PRO LOGIC”) performs Dolby Pro  
Logic decoding.  
– [Dolby PL II Movie] (“PLII MOVIE”) performs Dolby  
Pro Logic II movie mode decoding.  
• Multi-channel source: The system outputs sound from the  
speakers depending on the number of channels of the  
source.  
• [DTS Neo:6  
Cinema]  
“NEO6 CIN”  
• [DTS Neo:6 Music]  
“NEO6 MUS”  
• 2 channel source: The system simulates surround sound  
from 2 channel sources and produces 6.1 channel sound.  
– [DTS Neo:6 Cinema] (“NEO6 CIN”) performs DTS  
Neo:6 Cinema mode decoding.  
– [DTS Neo:6 Music] (“NEO6 MUS”) performs DTS  
Neo:6 Music mode decoding.  
• Multi-channel source: The system outputs sound from the  
speakers depending on the number of channels of the  
source.  
[2ch Stereo]  
“2CH ST.”  
The system outputs the sound from the front speakers and  
subwoofer regardless of sound format or number of channels.  
Multi-channel surround formats are downmixed to 2  
channels.  
US  
32  
• When you select [A.F.D. Multi] (“A.F.D. MULTI”), depending on the disc or source, the beginning of the sound  
may be cut off while the optimum mode is automatically selected. To avoid cutting the sound, select [A.F.D.  
Standard] (“A.F.D. STD”).  
• When bilingual broadcast sound is input, [Dolby Pro Logic] (“PRO LOGIC”) and [Dolby PL II Movie] (“PLII  
MOVIE”) are not effective.  
• Depending on the input stream, the surround settings may not be effective.  
• When you play a Super Audio CD, surround settings are not activated.  
• You can also select the surround setting in [Surround Setting] of [Audio Settings] (page 60).  
• For functions other than “BD/DVD,” “FM,” and “AUDIO,” you can check whether [Dolby Pro Logic] (“PRO  
LOGIC”) or the DTS Neo:6 mode is activated by pressing DISPLAY repeatedly so that the stream information/  
decoding status appears in the front panel display.  
US  
33  
2
3
Prepare for BD-LIVE (BD-LIVE only).  
• Connect the system to a network  
Playback  
• Set [BD Internet Connection] to [Allow]  
Playing a Disc  
For playable discs, see “Playable Discs”  
Insert a BD-ROM with BONUSVIEW/  
BD-LIVE.  
The operation method differs depending on  
the disc. Refer to the operating instructions  
of the disc.  
1
2
Switch the input selector on your TV so  
that the signal from the system  
appears on your TV screen.  
Press Z, and place a disc on the disc  
tray.  
• To delete data in the USB memory, select [Erase BD  
Data] in [Video], and press . All data stored in  
the buda folder will be deleted.  
Enjoying Blu-ray 3D  
You can enjoy Blu-ray 3D Discs with the 3D  
logo*.  
*
1
Prepare for Blu-ray 3D Disc playback.  
3
Press Z to close the disc tray.  
• Connect the system to your 3D-  
compatible TV using a High-Speed  
HDMI cable (supplied with BDV-E880/  
BDV-E980/BDV-T58 only).  
• Set [3D Output Setting] and [TV Screen  
Size Setting for 3D] in [Screen Settings]  
appears on the home menu and playback  
starts.  
If playback does not start automatically,  
select  
in the  
[Video],  
[Music], or  
.
[Photo] category, and press  
2
Insert a Blu-ray 3D Disc.  
Enjoying BONUSVIEW/BD-LIVE  
The operation method differs depending on  
the disc. Refer to the operating instructions  
supplied with the disc.  
Some BD-ROMs with “BD-LIVE Logo*” have  
bonus content and other data that can be  
downloaded for enjoyment.  
• Refer also to the operating instructions of your 3D-  
compatible TV.  
*
1
Connect the USB device to the  
(USB) port on the rear of the unit.  
For local storage, use a 1 GB or larger USB  
memory.  
Rear panel  
USB memory  
US  
34  
           
Displaying the play information  
Playing from a USB  
Device  
You can check the playback information, etc.,  
by pressing DISPLAY.  
The displayed information differs depending on  
the disc type and system status.  
You can play video/music/photo files on the  
connected USB device.  
For playable types of files, see “Playable Types  
Example: when playing a BD-ROM  
1
Connect the USB device to the  
(USB) port on the unit.  
Refer to the operating instructions of the  
USB device before connecting.  
Rear panel  
USB device  
Front panel  
A
B
C
D
Output resolution/Video frequency  
Title number or name  
The currently selected audio setting  
Available functions (  
subtitle)  
angle,  
audio,  
E
Playback information  
Displays play mode, playing status bar, disc  
type, video codec, bit rate, repeat type, elapsed  
time, total playing time  
USB device  
2
Press HOME.  
F
G
Chapter number  
The home menu appears on the TV screen.  
The currently selected angle  
3
4
Press C/c to select  
[Video],  
[Music], or  
[Photo].  
Press X/x to select  
[USB device  
(front)] or  
[USB device (rear)], then  
press  
.
• Do not remove the USB device during  
operation. To avoid data corruption or damage  
to the USB device, turn the system off when  
connecting or removing the USB device.  
US  
35  
     
To enjoy an iPod/iPhone via the  
system  
Enjoying an iPod/iPhone  
You can enjoy the music/video*/photo* and  
charge the battery of an iPod/iPhone via the  
system.  
1
(For U.S. and Canada models)  
Connect the Dock for iPod/iPhone  
(supplied) to the front or rear  
(USB)  
port on the unit, then place the iPod/  
iPhone onto the Dock for iPod/iPhone.  
* U.S. and Canada models only.  
When you play a video/photo file, connect  
the video out jack of the Dock for iPod/  
iPhone to the video input jack of your TV  
with a video cord (supplied) before placing  
the iPod/iPhone onto the Dock for iPod/  
iPhone.  
Compatible iPod/iPhone models  
The compatible iPod/iPhone models are as  
follows. Update your iPod/iPhone with the latest  
software before using with the system.  
Made for iPod classic, iPod 5th generation  
(video), iPod nano 6th generation, iPod nano 5th  
generation (video camera), iPod nano 4th  
generation (video), iPod nano 3rd generation  
(video), iPod nano 2nd generation (aluminum),  
iPod nano 1st generation, iPod touch 4th  
generation, iPod touch 3rd generation, iPod  
touch 2nd generation, iPod touch 1st generation,  
iPhone 4, iPhone 3GS, iPhone 3G, iPhone  
Front panel  
TV  
or  
Rear panel  
VIDEO IN  
Dock for  
iPod/iPhone  
USB cable (supplied)  
USB  
DE  
Video cord (supplied)  
US  
36  
 
(For other models)  
You can operate the iPod/iPhone using the  
buttons on the remote.  
Connect the iPod/iPhone to the  
(USB) port on the unit with the iPod/  
iPhone’s USB cable.  
For operation details, refer to the operating  
instructions of the iPod/iPhone.  
Rear panel  
• To change a system setting, such as the surround  
setting, while viewing images from your iPod/iPhone  
on your TV, select the input on your TV for this  
system before operating the system. (U.S. and  
Canada models only.)  
USB cable that is connected to the iPod/iPhone  
Front panel  
To operate the iPod/iPhone using  
the remote  
You can operate the iPod/iPhone using the  
buttons on the remote. The following table  
shows an example of buttons that can be used.  
(Depending on the iPod/iPhone model, the  
operation may be different.)  
For  
[Video]*/  
[Music]  
USB cable that is connected to the iPod/iPhone  
Press  
Operation  
2
3
Press HOME.  
N
Starts play.  
The home menu appears on the TV screen.  
X
Pauses play.  
Press C/c to select  
[Video]*,  
x
Stops play.  
[Music], or [Photo]*.  
m or M  
. or >  
Fast reverses or forwards.  
* U.S. and Canada models only.  
Goes to the previous/next file or  
chapter (if any).  
4
Press X/x to select [iPod (front)] or  
[iPod (rear)], then press  
.
For  
[Photo]*  
x If you selected [Video]* or [Music] in  
Step 3  
Press  
Operation  
The video/music files are listed on the TV  
screen. Go to the next Step.  
N, X  
Starts/pauses play.  
When you press and hold either of  
these buttons for several seconds,  
the connected iPod/iPhone enters  
sleep mode.  
x If you selected [Photo] in Step 3*  
[Please change the TV input to the video  
input] appears on the TV screen. Switch the  
input selector on your TV so that the signal  
from the iPod/iPhone appears on your TV  
screen. Then, start the slideshow by  
x
Pauses play.  
m or M  
. or >  
Fast reverses or forwards.  
Goes to the previous/next file.  
When you press and hold either of  
these buttons, the connected iPod/  
iPhone fast reverses or fast forwards.  
operating the iPod/iPhone directly.  
* U.S. and Canada models only.  
5
Press C/X/x/c and  
that you want to play.  
to select the file  
DISPLAY  
Turns the backlight on (or extends it  
for 30 seconds).  
The sound from the iPod/iPhone is played  
on the system.  
OPTIONS, C Returns to previous display/folder  
hierarchy.  
X/x  
, c  
Selects the previous/next item.  
Enters the selected item.  
When you play a video file, switch the input  
selector on your TV so that the signal from  
the iPod/iPhone appears on your TV screen.  
(U.S. and Canada models only)  
* U.S. and Canada models only.  
US  
37  
• The iPod/iPhone is charged when connected to the  
system while the system is turned on.  
Playing via a Network  
• You cannot transfer songs onto the iPod/iPhone from  
this system.  
Streaming BRAVIA Internet  
Video  
• Sony cannot accept responsibility in the event that  
data recorded to iPod/iPhone is lost or damaged when  
using an iPod/iPhone connected to this unit.  
• This product has been designed specifically to work  
with iPod/iPhone and has been certified to meet  
Apple performance standards.  
BRAVIA Internet Video serves as a gateway  
delivering selected Internet content and a variety  
of on-demand entertainment straight to your  
unit.  
• Do not remove the iPod/iPhone during operation. To  
avoid data corruption or damage to the iPod/iPhone,  
turn the system off when connecting or removing the  
iPod/iPhone.  
• For customers in the U.S. and Canada:  
Some Internet content requires registration via a PC  
before it can be played. For further details, visit the  
following website:  
• The system only recognizes iPods/iPhones that have  
previously been connected to the system.  
• The System Audio Control function does not work  
while playing video/photo files via the iPod/iPhone  
(U.S. and Canada models only).  
• When you connect an iPod that is not compatible with  
the video output function and select [iPod (front)]  
or [iPod (rear)] in [Video] or [Photo], an alert  
message appears on the TV screen (U.S. and Canada  
models only).  
1
Prepare for BRAVIA Internet Video.  
Connect the system to a network (page 27).  
2
3
Press C/c to select  
[Video],  
[Music], or [Photo].  
• The system can recognize up to 3,000 files (including  
folders).  
Press X/x to select an Internet content  
provider icon, then press  
.
If the Internet content list has not been  
retrieved, it will be represented by an  
unacquired icon or a new icon.  
To use the control panel  
The control panel appears when the video file  
starts playing. The displayed items may differ  
depending on Internet content providers.  
To display again, press DISPLAY.  
A
B
Control display  
Press C/X/x/c or  
for playback operations.  
Playing status bar  
Status bar, cursor indicating the current  
position, playing time, duration of the video  
file  
US  
38  
     
C Network condition indicator  
Indicates signal strength for a wireless  
connection.  
Indicates a wired connection.  
To play files stored on a DLNA  
server via the system (DLNA  
Player)  
Select the DLNA server icon from  
[Video],  
D
E
F
Network transmission speed  
The next video file name  
[Music], or  
then select the file that you want to play.  
[Photo] in the home menu,  
The currently selected video file name  
Server  
Playing files on a Home  
Network (DLNA)  
You can play video/music/photo files on other  
DLNA-certified components by connecting  
them to your home network.  
Player  
(This system)  
This unit can be used as a player and renderer.  
• Server: Stores and sends files  
• Player: Receives and plays files from the  
server  
To play remote files by operating  
the system (Renderer) via a DLNA  
controller  
You can operate the system with a DLNA-  
certified controller, such as iPhone, when  
playing files stored on a DLNA server.  
• Renderer: Receives and plays files from the  
server, and can be operated by another  
component (controller)  
• Controller: Operates the renderer component  
Server  
Server  
Renderer  
Controller  
(This system)  
Player  
Player  
(This system)  
Control this system using a DLNA controller.  
For details of operation, see the operating  
instructions of the DLNA controller.  
Prepare for using the DLNA function.  
• Connect the system to a network (page 27).  
• Prepare other DLNA-certified components.  
For details, see the operating instructions of  
the components.  
• Do not operate the system with the supplied remote  
and a DLNA controller at the same time.  
• For details about the DLNA controller, refer to the  
operating instructions of the DLNA controller.  
• The system is compatible with the “Play To” function  
®
of Windows Media Player 12 that comes standard  
with Windows 7.  
US  
39  
 
Playing the same music in  
different rooms (PARTY  
STREAMING)  
• The sale and product lineup of products that are  
compatible with the PARTY STREAMING function  
differ depending on the area.  
Searching for video/music  
information  
You can play the same music at the same time  
across all Sony components which are  
compatible with the PARTY STREAMING  
function and connected to your home network.  
You can acquire content information using  
Gracenote technology and search for related  
information.  
There are two kinds of PARTY STREAMING-  
compatible components.  
1
2
Connect the system to a network  
• PARTY host: Sends and plays files  
• PARTY guest: Receives and plays files  
Insert a disc or connect a USB device  
with content about which you want to  
search.  
This unit can be used as a PARTY host or  
PARTY guest.  
You can perform a video search from a BD-  
ROM or DVD-ROM, and a music search  
from a CD-DA (music CD) or USB device.  
PARTY host  
(This system)  
3
4
Press C/c to select  
[Video] or  
[Music].  
Press X/x to select  
[Video Search]  
or  
[Music Search].  
The content information is displayed.  
PARTY guest  
PARTY guest  
Prepare for PARTY STREAMING.  
• Connect the system to a network (page 27).  
• Connect components which are compatible  
with the PARTY STREAMING function.  
A
B
Content details  
Displays a list of related information, such as  
title, cast, track, or artist.  
To use the system as PARTY host  
Select a track in  
[Music], then select [Start  
Party] from the options menu to start a PARTY.  
To close the PARTY, press HOME.  
[Playback History]  
Displays a list of previously played BD-ROM/  
DVD-ROM/CD-DA (music CD) titles. Select  
a title to acquire content information.  
To use the system as PARTY  
guest  
C
[Search History]  
Select  
[Party] in  
[Music], then select the  
Displays a list of previous searches performed  
via the [Video Search] or [Music Search]  
function.  
PARTY host device icon.  
To leave the PARTY, press OPTIONS, then  
select [Leave Party].  
To close the PARTY, press OPTIONS, then  
select [Close Party].  
US  
40  
To search for further related  
information  
Select an item in the lists, and select  
[Video] only  
Items  
[A/V SYNC]  
Details  
[Information Search] or [Internet Video Search].  
Adjusts the gap between  
picture and sound. For  
details, see “Adjusting the  
Available Options  
Various settings and playback operations are  
available by pressing OPTIONS. The available  
items differ depending on the situation.  
[3D Output Setting] Sets whether or not to output  
3D video automatically.  
• 3D video from the HDMI  
(IN 1) or HDMI (IN 2) jack  
is output regardless of this  
setting.  
Common options  
Items  
Details  
[Video Settings]  
• [Picture Quality Mode]:  
Selects the picture settings  
for different lighting  
environments.  
[Surround Setting]  
Changes the surround setting  
[Repeat Setting]  
[3D Menu]  
Sets repeat playback.  
• [FNR]: Reduces the random  
noise appearing in the  
picture.  
[3D Depth Adjustment]:  
Adjusts the depth of 3D  
images.  
• [BNR]: Reduces the  
mosaic-like block noise in  
the picture.  
[Favorites List]  
[Play/Stop]  
Displays the Favorites List.  
Starts or stops playback.  
• [MNR]: Reduces minor  
noise around the picture  
outlines (mosquito noise).  
[Play from beginning] Plays the item from the  
beginning.  
[Add to Favorites]  
Adds an Internet content item  
to the Favorites List.  
[Pause]  
Pauses playback.  
[Top Menu]  
Displays the BD’s or DVD’s  
Top Menu.  
[Remove from  
Favorites]  
Erases an Internet content  
item from the Favorites List.  
[Menu/Popup Menu] Displays the BD-ROM’s  
[Start Party]  
Starts a party with the  
selected source.  
Pop-up Menu or DVD’s  
menu.  
This item may not appear  
depending on the source.  
[Title Search]  
Searches for a title on BD-  
ROMs/DVD VIDEOs and  
starts playback from the  
beginning.  
[Leave Party]  
Leaves from a party which  
the system is participating in.  
The PARTY STREAMING  
function continues among  
other participating devices.  
[Chapter Search]  
[Angle]  
Searches for a chapter and  
starts playback from the  
beginning.  
[Close Party]  
Closes a party which the  
system is participating in. The  
PARTY STREAMING  
function ends for all other  
participating devices.  
Switches to other viewing  
angles when multi-angles are  
recorded on BD-ROMs/DVD  
VIDEOs.  
[IP Content Noise  
Reduction]  
Adjusts the video quality for  
Internet content.  
[Video Search]  
Displays information on the  
BD-ROM/DVD-ROM based  
on Gracenote technology.  
US  
41  
   
[Music] only  
When playing via the “BD/DVD”  
function  
Items  
Details  
1
Press OPTIONS.  
[Add Slideshow  
BGM]  
Registers music files in the  
USB memory as slideshow  
background music (BGM).  
The option menu appears on the TV screen.  
2
3
Press X/x to select [A/V SYNC], then  
[Music Search]  
Displays information on the  
audio CD (CD-DA) based on  
Gracenote technology.  
press  
.
Press C/c to adjust the delay between  
the picture and sound.  
[Shuffle Setting]  
Sets shuffle playback.  
You can adjust from 0 ms to 300 ms in 25  
ms increments.  
(iPod/iPhone only)  
[Photo] only  
4
Press  
.
The setting is made.  
Items  
Details  
[Slideshow]  
Starts a slideshow.  
Changes the slideshow speed.  
When playing via the “HDMI1,”  
“HDMI2,” “TV,” “SAT/CABLE,” or  
“AUDIO” function  
[Slideshow Speed]  
[Slideshow Effect]  
Sets the effect when playing a  
slideshow.  
1
Press OPTIONS.  
[Slideshow BGM]  
• [Off]: Turns off the  
function.  
The option menu appears in the front panel  
display.  
• [My Music from USB]: Sets  
the music files registered in  
[Add Slideshow BGM].  
• [Play from Music CD]: Sets  
the tracks on CD-DAs  
(music CDs).  
2
3
Press X/x repeatedly until “A/V SYNC”  
appears in the front panel display, then  
press  
or c.  
Press X/x to adjust the delay between  
the picture and sound.  
[Rotate Left]  
Rotates the photo  
counterclockwise by  
90 degrees.  
You can adjust from 0 ms to 300 ms in 25  
ms increments.  
[Rotate Right]  
[View Image]  
Rotates the photo clockwise  
by 90 degrees.  
4
5
Press  
.
The setting is made.  
Displays the selected picture.  
Press OPTIONS.  
The option menu in the front panel display  
turns off.  
Adjusting the delay between  
the picture and sound  
(A/V SYNC)  
When the sound does not match the pictures on  
the TV screen, you can adjust the delay between  
the picture and sound.  
The setting method differs depending on the  
function.  
• Depending on the input stream, A/V SYNC may not  
be effective.  
US  
42  
     
at low volume. It is useful for watching movies  
at night.  
Sound Adjustment  
• Depending on the disc or source, when you select  
“AUTO,” the beginning of the sound may be cut off  
as the system selects the optimum mode  
automatically. To avoid cutting the sound, select  
other than “AUTO.”  
Selecting the Effect to  
Suit the Source  
You can select a suitable sound mode for movies  
or music.  
• Depending on the input stream, the sound mode may  
not be effective.  
• When you play a Super Audio CD, this function does  
not work.  
• When “NIGHT” is selected and sound is output from  
the center speaker, this effect is more pronounced, as  
speech (movie dialog, etc.) is easy to hear. When  
sound is not output from the center speaker, the  
system optimally adjusts the volume.  
1
4
7
2
5
8
0
3
6
9
SOUND  
MODE +/–  
Selecting the Audio  
Format, Multilingual  
Tracks, or Channel  
Press SOUND MODE +/– repeatedly during  
playback until the desired mode appears in  
the front panel display.  
When the system is playing a BD/DVD VIDEO  
recorded in multiple audio formats (PCM,  
Dolby Digital, MPEG audio, or DTS) or  
multilingual tracks, you can change the audio  
format or language.  
• “AUTO”: The system selects “MOVIE” or  
“MUSIC” automatically to produce the sound  
effect depending on the disc or sound stream.  
• “MOVIE”: The system provides the sound for  
movies.  
With a CD, you can select the sound from the  
right or left channel and listen to the sound of the  
selected channel through both the right and left  
speakers.  
• “MUSIC”: The system provides the sound for  
music.  
• “SPORTS”: The system adds reverberation for  
sports programs.  
• “GAME ROCK”: The system provides the  
sound for music/rhythm games.  
1
4
7
2
5
8
0
3
6
9
• “OMNI-DIR”: The same sound is audible  
anywhere in the room.  
AUDIO  
• “3D SUR.”: “3D SUR.” is a unique Sony  
algorithm used for playing 3D (three-  
dimensional) content that provides a 3D sound  
experience with depth and presence by  
creating a virtual sound field close to your  
ears.  
• “HALL”: The system reproduces the sound of  
a concert hall.  
Press AUDIO repeatedly during playback to  
select the desired audio signal.  
• “NIGHT”: You can enjoy sound effects or  
dialog, as you would in a movie theater, even  
The audio information appears on the TV  
screen.  
US  
43  
             
x BD/DVD VIDEO  
Depending on the BD/DVD VIDEO, the choice  
of language varies.  
Enjoying Multiplex  
Broadcast Sound  
(DUAL MONO)  
You can enjoy multiplex broadcast sound when  
the system receives or plays a Dolby Digital  
multiplex broadcast signal.  
When 4 digits are displayed, they indicate a  
(page 76) to confirm which language the code  
represents. When the same language is  
displayed two or more times, the BD/DVD  
VIDEO is recorded in multiple audio formats.  
x DVD-VR  
The types of sound tracks recorded on a disc are  
displayed.  
Example:  
• To receive the Dolby Digital signal, you need to  
connect a TV or other component to the unit with a  
digital coaxial or optical cord (pages 22, 24). If your  
TV is compatible with the Audio Return Channel  
function (pages 22, 61), you can receive a Dolby  
Digital signal via an HDMI cable.  
• [ Stereo]  
• [ Stereo (Audio1)]  
• [ Stereo (Audio2)]  
• [ Main]  
• [ Sub]  
1
4
7
2
5
8
0
3
6
9
• [ Main/Sub]  
AUDIO  
• [ Stereo (Audio1)] and [ Stereo (Audio2)] do not  
appear when only one audio stream is recorded on the  
disc.  
x CD  
• [ Stereo]: The standard stereo sound.  
• [ 1/L]: The sound of the left channel  
(monaural).  
Press AUDIO repeatedly until the desired  
signal appears in the front panel display.  
• [ 2/R]: The sound of the right channel  
(monaural).  
• “MAIN”: Sound of the main language will be  
output.  
• [ L+R]: The sound of both the left and right  
channels output from each individual speaker.  
• “SUB”: Sound of the sub language will be  
output.  
• “MAIN/SUB”: Mixed sound of both the main  
and sub languages will be output.  
US  
44  
     
3
Adjust the volume by pressing  
VOL +/–.  
Tuner  
If an FM program is noisy  
If an FM program is noisy, you can select  
monaural reception. There will be no stereo  
effect, but reception will improve.  
Listening to the Radio  
You can enjoy radio sound with the system’s  
speakers.  
1
Press OPTIONS.  
The option menu appears on the TV screen.  
"/1  
2
3
Press X/x to select [FM Mode], then  
1
4
7
2
5
8
0
3
6
9
Number  
buttons  
press  
.
FUNCTION  
Press X/x to select [Monaural].  
• [Stereo]: Stereo reception.  
• [Monaural]: Monaural reception.  
C/X/x/c,  
OPTIONS  
4
Press  
.
HOME  
PRESET +/–  
The setting is made.  
TUNING +/–  
To turn off the radio  
x
Press "/1.  
VOL +/–  
Current station  
Presetting radio stations  
Current preset number  
You can preset up to 20 stations. Before tuning,  
make sure to turn down the volume to minimum.  
FM  
7
1
2
Press FUNCTION repeatedly until “FM”  
appears in the front panel display.  
88.00 MHz  
Press and hold TUNING +/– until the  
auto scanning starts.  
Scanning stops when the system tunes in a  
station.  
1
2
Press FUNCTION repeatedly until “FM”  
appears in the front panel display.  
3
Press OPTIONS.  
The option menu appears on the TV screen.  
Select the radio station.  
4
5
6
Press X/x to select [Preset Memory],  
then press  
Press X/x to select the preset number  
you want, then press  
.
Automatic tuning  
Press and hold TUNING +/– until the auto  
scanning starts.  
.
[Auto Tuning] appears on the TV screen.  
Scanning stops when the system tunes in a  
station.  
Repeat Steps 2 to 5 to store other  
stations.  
To change the preset number  
To stop the automatic tuning manually,  
press TUNING +/– or x.  
Select the desired preset number by pressing  
PRESET +/–, then perform the procedure from  
Step 3.  
Manual tuning  
Press TUNING +/– repeatedly.  
US  
45  
         
Selecting the preset station  
1
Press FUNCTION repeatedly until “FM”  
appears in the front panel display.  
The last received station is tuned in.  
2
Press PRESET +/– repeatedly to select  
the preset station.  
The preset number and frequency appear on  
the TV screen and front panel display.  
Each time you press the button, the system  
tunes in one preset station.  
• You can select the preset station number directly  
by pressing the number buttons.  
• Each time you press DISPLAY, the display in  
the front panel display changes as follows:  
Frequency t Preset number t Stream  
information/Decode status t Frequency t …  
US  
46  
 
• When the system is turned on, the sound of the  
TV or other components can be output from  
the speakers of the system.  
Other Operations  
• When sound from the TV or other components  
is output via the speakers of the system, you  
can change the speakers to which TV sound is  
output by pressing  
Using the Control for  
HDMI Function for  
“BRAVIA” Sync  
This function is available on TVs with the  
“BRAVIA” Sync function.  
By connecting Sony components that are  
compatible with the Control for HDMI function  
via an HDMI cable, operation is simplified.  
SPEAKERS TVyAUDIO.  
• When sound from the TV or other components  
is output via the speakers of the system, you  
can adjust the volume and turn off the sound of  
the system by operating the TV.  
• While the TV is in PAP (picture and picture) mode,  
or the system is playing video/photo files from the  
iPod/iPhone, the System Audio Control function will  
not work.  
• Some functions can only be used if the connected TV  
is compatible, and require prior setting via the TV.  
Refer to the operating instructions of the TV.  
• To use the System Audio Control function, you need  
to make an audio connection between the system and  
• Depending on the TV, when you adjust the unit’s  
volume, the volume level appears on the TV screen.  
In this case, the volume level that appears on the TV  
screen and the unit’s front panel display may differ.  
Audio Return Channel  
You can enjoy TV sound via the system by using  
just one HDMI cable. For details of the setting,  
Using “BRAVIA” Sync  
Control for HDMI - Easy Setting  
You can set the system’s [Control for HDMI]  
function automatically by enabling the  
corresponding setting on the TV.  
For details about the Control for HDMI  
Remote Easy Control  
You can control the basic functions of the  
system via the TV remote when the system’s  
video output is displayed on the TV screen.  
Language Follow  
System Power Off  
You can turn the system off in sync with the TV.  
When you change the language for the on-screen  
display of the TV, the system’s on-screen  
display language is also changed after turning  
the system off and on.  
• The system does not turn off automatically while  
playing music or when set to the “FM” function.  
Routing Control  
One-Touch Play  
When you perform One-Touch Play on the  
connected component, the system turns on and  
sets the system’s function to “HDMI1” or  
“HDMI2” (depending on the HDMI input jack  
in use), and your TV’s input is automatically set  
to the HDMI input to which the system is  
connected.  
When you press N on the remote, the system  
and your TV turn on, and your TV’s input is set  
to the HDMI input to which the system is  
connected.  
System Audio Control  
You can simplify operation to enjoy sound from  
the TV or other components.  
• Make sure that the component is connected to the  
system via an HDMI cable, and the Control for  
HDMI function of the connected component is set to  
on.  
You can use the System Audio Control function  
as follows:  
US  
47  
         
Calibrating the  
Appropriate Settings  
Automatically  
[Auto Calibration]  
2
C
-A  
M
C
E
A.CAL MIC  
D.C.A.C. (Digital Cinema Auto Calibration) can  
set the appropriate surround sound  
automatically.  
• The system outputs a loud test sound when [Auto  
Calibration] starts. You cannot turn the volume  
down. Give consideration to children and neighbors.  
Calibration mic  
1
Press HOME.  
The home menu appears on the TV screen.  
2
3
Press C/c to select  
Press X/x to select [Audio Settings],  
then press  
Press X/x to select [Auto Calibration],  
then press  
[Setup].  
.
4
.
6
7
Press X/x to select [OK].  
The confirmation display for [Auto  
Calibration] appears.  
To cancel, select [Cancel].  
5
Connect the calibration mic to the  
A.CAL MIC jack on the rear panel.  
Press  
.
[Auto Calibration] starts.  
Set up the calibration mic at ear level using  
a tripod, etc. (not supplied). The front of  
each speaker should face the calibration  
mic, and there should be no obstruction  
between the speakers and the calibration  
mic.  
The system adjusts the speaker settings  
automatically.  
Be quiet during the measurement.  
• Before [Auto Calibration], make sure that the  
surround amplifier turns on and you install the  
surround amplifier in the appropriate location. If  
you install the surround amplifier in an improper  
location, such as another room, proper  
measurement will not be obtained.  
8
Confirm the conclusions of [Auto  
Calibration].  
The speakers connected to the unit are listed  
as [Yes] on the TV screen.  
• If measurement fails, follow the message then  
retry [Auto Calibration].  
• The measurement for [Subwoofer] is always  
[Yes] and [Speaker Settings] returns to the  
default setting when you perform [Auto  
Calibration].  
US  
48  
       
[Surround]  
9
Press X/x to select [OK] or [Cancel],  
then press  
.
[Yes]: Normally select this.  
[None]: Select this if no surround speaker is  
used.  
x The measurement is OK.  
Disconnect the calibration mic, then select  
[OK]. The result is implemented.  
[Subwoofer]  
[Yes]  
x The measurement is not OK.  
Follow the message, then select [OK] to  
retry.  
x [Distance]  
When you move the speakers, be sure to set the  
parameters of the distance (A) from the  
listening position to the speakers.  
You can set the parameters from 0 to 23 feet (0.0  
to 7.0 meters).  
• While the Auto Calibration function is working, do  
not operate the system.  
The speakers in the illustration correspond to the  
following:  
Setting the Speakers  
[Speaker Settings]  
To obtain the best possible surround sound, set  
connection of the speakers and their distance  
from your listening position. Then use the test  
tone to adjust the level and the balance of the  
speakers to the same level.  
1Center speaker  
2Front left speaker (L)  
3Front right speaker (R)  
4Subwoofer  
5Surround left speaker (L)  
6Surround right speaker (R)  
1
2
3
1
Press HOME.  
The home menu appears on the TV screen.  
2
3
Press C/c to select  
Press X/x to select [Audio Settings],  
then press  
Press X/x to select [Speaker Settings],  
then press  
[Setup].  
4
A
.
4
.
The [Speaker Settings] display appears.  
5
Press X/x to select the item, then press  
A
.
5
6
Check the following settings.  
[Front Left/Right] 10 ft/3.0 m: Set the front  
speaker distance.  
x [Connection]  
[Center]* 10 ft/3.0 m: Set the center speaker  
distance.  
[Surround Left/Right]* 10 ft/3.0 m: Set the  
surround speaker distance.  
If you do not connect center or surround  
speakers, set the parameters for [Center] and  
[Surround]. Since the front speaker and  
subwoofer settings are fixed, you cannot change  
them.  
[Subwoofer] 10 ft/3.0 m: Set the subwoofer  
distance.  
[Front]  
* This item appears when you set it to [Yes] in the  
[Connection] setting.  
[Yes]  
[Center]  
[Yes]: Normally select this.  
[None]: Select this if no center speaker is used.  
• Depending on the input stream, [Distance] may not  
be effective.  
US  
49  
         
9
Press X/x to select [Off], then press  
.
• You can change measurement units (feet or meters)  
by pressing the color button (RED).  
• The test tone signals are not output from the HDMI  
(OUT) jack.  
x [Level]  
You can adjust the sound level of the speakers.  
You can set the parameters from –6.0 dB to +6.0  
dB. Be sure to set [Test Tone] to [On] for easy  
adjustment.  
• To adjust the volume of all the speakers at one time,  
press VOL +/–.  
[Front Left/Right] 0.0 dB: Set the front speaker  
level.  
[Center]* 0.0 dB: Set the center speaker level.  
[Surround Left/Right]* 0.0 dB: Set the surround  
speaker level.  
[Subwoofer] 0.0 dB: Set the subwoofer level.  
* This item appears when you set it to [Yes] in the  
[Connection] setting.  
Using the Sleep Timer  
You can set the system to turn off at a preset  
time, so you can fall asleep listening to music.  
The time can be preset in intervals of 10  
minutes.  
Press SLEEP.  
Each time you press SLEEP, the minutes display  
(the remaining time) in the front panel display  
changes by 10 minutes.  
x [Test Tone]  
The speakers will emit a test tone to adjust  
[Level].  
When you set the sleep timer, the remaining  
time appears every 5 minutes.  
[Off]: The test tone is not emitted from the  
speakers.  
When the remaining time is less than 2 minutes,  
“SLEEP” flashes in the front panel display.  
[On]: The test tone is emitted from each speaker  
in sequence while adjusting level. When you  
select one of the [Speaker Settings] items, the  
test tone is emitted from each speaker in  
sequence.  
To check the remaining time  
Press SLEEP once.  
Adjust the sound level as follows.  
To change the remaining time  
1
2
Set [Test Tone] to [On].  
Press SLEEP repeatedly to select the desired  
time.  
Press X/x to select [Level], then press  
.
3
4
Press X/x to select the desired speaker  
type, then press  
.
Press C/c to select the left or right  
speaker, then press X/x to adjust the  
level.  
5
6
7
Press  
.
Repeat Steps 3 to 5.  
Press RETURN.  
The system returns to the previous display.  
8
Press X/x to select [Test Tone], then  
press  
.
US  
50  
         
Code numbers of controllable  
TVs  
If more than one code number is listed, try  
entering them one at a time until you find the  
code that works with your TV.  
Deactivating the Buttons  
on the Unit  
(Child Lock)  
Manufacturer  
SONY  
Code number  
You can deactivate the buttons on the unit  
(except for "/1) for preventing misoperation,  
such as child mischief (child lock function).  
01 (default)  
LG  
02  
PANASONIC  
SAMSUNG  
SHARP  
05  
Press x on the unit for more than 5  
seconds.  
02, 06  
03  
“LOCKED” appears in the front panel display.  
The child lock function is activated and the  
buttons on the unit are locked. (You can operate  
the system by using the remote.)  
TOSHIBA  
VIZIO  
04  
07  
To cancel, press x for more than 5 seconds so  
that “UNLOCK” appears in the front panel  
display.  
Changing the Brightness  
of the Front Panel  
Display  
• When you operate the buttons on the unit while the  
child lock function is on, “LOCKED” flashes in the  
front panel display.  
Press DIMMER.  
Each time you press DIMMER, the brightness of  
the front panel display is changed.  
Controlling Your TV with  
the Supplied Remote  
By adjusting the remote signal, you can control  
your TV with the supplied remote.  
Saving Power in Standby  
Mode  
• When you replace the batteries of the remote, the  
code number may reset itself to the default (SONY)  
setting. Reset the appropriate code number.  
Check that the following settings are both made:  
– [Control for HDMI] in [HDMI Settings] is set  
to [Off] (page 61).  
– [Quick Start Mode] is set to [Off] (page 62).  
Preparing the remote for  
controlling the TV  
Press and hold TV "/1 while entering your  
TV’s manufacturer’s code (see the table)  
using the number buttons. Then release TV  
"/1.  
If the setting is unsuccessful, the currently  
registered code is not changed. Re-enter the  
code number.  
US  
51  
               
A
B
Page title  
Cursor  
Browsing Websites  
You can connect to the Internet and enjoy  
websites like the Sony homepage using the  
system.  
Move by pressing C/X/x/c. Place the cursor  
on the link you want to view, then press  
The linked website is displayed.  
.
C
D
Page address  
SSL icon  
1
2
Prepare for Internet browsing.  
Appears when the linked URL is secured.  
Connect the system to a network (page 27).  
E
F
G
H
Signal strength indicator  
Appears when the system is connected to a  
wireless network.  
Press HOME.  
The home menu appears on the TV screen.  
Progress bar/Loading icon  
Appears when the page is being read, or during  
file download/transfer.  
3
4
Press C/c to select  
Press X/x to select [Internet Browser],  
then press  
The [Internet Browser] display appears.  
[Network].  
.
Text input field  
Press , then choose [Input] from the options  
menu to open the software keyboard.  
• Some websites may not display correctly, or not  
function.  
Scroll bar  
Press C/X/x/c to move the page display left,  
up, down, or right.  
To enter a URL  
Select [URL entry] from the options menu.  
Enter the URL using the software keyboard,  
then select [Enter].  
Available options  
Various settings and operations are available by  
pressing OPTIONS.  
The available items differ depending on the  
situation.  
To set the default start page  
While the page you want to set is displayed,  
select [Set as start page] from the options menu.  
To quit Internet Browser  
Items  
Details  
Press HOME.  
[Browser Setup]  
Displays the Internet Browser  
settings.  
• [Zoom]: Increases or  
decreases the size of the  
displayed contents.  
• [JavaScript Setup]: Sets  
whether to enable or disable  
JavaScript.  
Internet Browser display  
You can check website information by pressing  
DISPLAY. The display information differs  
depending on the website and page status.  
• [Cookie Setup]: Sets  
whether or not to accept  
browser cookies.  
• [SSL Alarm Display]: Sets  
whether to enable or disable  
SSL.  
[Input]  
Displays the software  
keyboard to enter characters  
while browsing a website.  
[Break]  
Moves the cursor to the next  
line in the text input field.  
US  
52  
   
Items  
Details  
[Delete]  
Erases one character on the  
left side of the cursor during  
text input.  
Setting up the Network  
[Internet Settings]  
[Window List]  
Displays a list of all currently  
opened websites.  
Before setting, connect the system to the  
network. For details, see “Step 3: Connecting to  
Allows you to return to a  
previously displayed website  
by selecting the window.  
To open the setting display  
[Bookmark List]  
Displays the bookmark list.  
1
Press HOME.  
[Character encoding] Sets the character code.  
[Previous page]  
Moves to a previously  
displayed page.  
1
4
7
2
5
8
0
3
6
9
[Next page]  
Moves to the previously  
displayed next page.  
[Cancel loading]  
[Reload]  
Stops loading a page.  
Reloads the same page.  
[URL entry]  
Allows you to enter a URL  
when the software keyboard  
is displayed.  
HOME  
[Add to Bookmark]  
[Set as start page]  
Adds the currently displayed  
website to the bookmark list.  
Sets the currently displayed  
website as the default start  
page.  
The home menu appears on the TV screen.  
Press C/c to select [Setup].  
2
3
[Open in new  
window]  
Opens a link in a new  
window.  
[Display certificate] Displays server certificates  
sent from pages that support  
SSL.  
Press X/x to select [Network Settings],  
then press  
.
US  
53  
     
4
Press X/x to select [Internet Settings],  
then press  
The [Internet Settings] display appears.  
4
5
Press X/x to select [Save & Connect],  
then press  
.
.
The system starts checking the network  
connection.  
Check that the message [Internet  
Settings is now complete.] appears,  
then press  
.
The setup is finished. If the message does  
not appear, follow the on-screen messages.  
Manual setting  
1
Press X/x to select [Wired Setup] on  
the [Internet Settings] display, then  
• The [Internet Settings] items are necessary to connect  
to the Internet. Enter the respective (alphanumeric)  
values for your broadband router or Wireless LAN  
router. The items that need to be set may differ,  
depending on the Internet service provider or the  
router. For details, refer to the instruction manuals  
that have been provided by your Internet service  
provider or supplied with the router.  
press  
Press X/x to select [Custom], then  
press  
Press X/x to select the network setting  
type, then press  
.
2
3
.
.
• [Auto]: The system sets the IP address  
automatically, and the [DNS Settings]  
display appears.  
• For more information, go to the following URL.  
For customers in the U.S.:  
When you select [Auto] and press  
system sets the DNS setting  
automatically.  
, the  
For customers in Canada:  
When you select [Specify IP address] and  
press  
, enter the DNS settings  
manually.  
For customers in Mexico and Latin America:  
http://esupport.sony.com/LA  
Press C/X/x/c and the number buttons to  
set the following items, then press  
.
– [Primary DNS]  
– [Secondary DNS]  
When connecting to the LAN  
with a LAN cable  
• [Specify IP address]: Enter the network  
settings manually according to your  
network environment.  
Press C/X/x/c and the number buttons to  
set the following items, then press  
Follow the Steps below for connecting to a LAN  
(Local Area Network).  
.
– [IP Address]  
Auto setting  
– [Subnet Mask]  
1
Press X/x to select [Wired Setup] on  
the [Internet Settings] display, then  
– [Default Gateway]  
– [Primary DNS]  
press  
.
– [Secondary DNS]  
2
Press X/x to select [Auto], then press  
.
4
Press X/x to select the proxy server  
setting, then press  
.
The system performs the network setting  
automatically, and internet settings appear  
on the TV screen.  
• [No]: A proxy server is not used.  
• [Yes]: Enter the proxy server setting.  
Press C/X/x/c and the number buttons,  
3
Press c.  
then press  
.
US  
54  
     
The value of the internet settings appears on  
the TV screen.  
above.  
5
6
Press c.  
When your wireless router is not  
compatible with the WPS  
function  
Press X/x to select [Save & Connect],  
then press  
.
The system starts checking the network  
connection.  
1
2
3
Press X/x to select [Wireless  
Setup(built-in)]* or [USB Wireless  
Setup] on the [Internet Settings]  
7
Check that the message [Internet  
Settings is now complete.] appears,  
display, then press  
.
then press  
.
* BDV-E580/BDV-T58 only.  
The setup is finished. If the message does  
not appear, follow the on-screen messages.  
Press X/x to select [Scan], then press  
.
The system searches for available wireless  
LANs, then the list of wireless LANs  
appears.  
When connecting to the  
wireless LAN with the system’s  
built-in Wi-Fi or the USB  
Wireless LAN Adapter  
Press X/x to select the wireless LAN  
name, then press  
.
x When the selected wireless LAN is  
unsecured  
Follow the Steps below for connecting to a  
wireless LAN (Local Area Network).  
Setup of wireless LAN connectivity is  
finished. Next, enter the IP address settings  
by following the Steps of “Auto setting” or  
When your wireless router is  
compatible with the WPS  
function  
x When the selected wireless LAN is  
secured  
The display for entering a WEP or WPA  
key appears. Go to Step 5.  
1
Press X/x to select [Wireless  
Setup(built-in)]* or [USB Wireless  
Setup] on the [Internet Settings]  
display, then press  
.
x To specify the wireless LAN name  
Select [Manual Entry].  
* BDV-E580/BDV-T58 only.  
2
3
Press X/x to select [Wi-Fi Protected  
The input display appears. Enter the  
wireless LAN name by following the on-  
screen messages, then press c.  
Setup (WPS)], then press  
.
Activate the WPS function of your  
wireless router, press X/x to select  
[Start], then press  
.
For details about activating the WPS  
function, see the operating instructions of  
your router.  
4
Check that the message [Wi-Fi  
Protected Setup was successful.]  
appears, then press c.  
Setup of wireless LAN connectivity and the  
IP address is finished.  
Next, enter the proxy server setting. Follow  
Steps 4 to 7 of “Manual setting” in “When  
US  
55  
4
Press X/x to select the security mode,  
then press  
WEP  
.
WEP applies security to communications to  
prevent outsiders from intercepting  
communications or intruding into your wireless  
network. WEP is a legacy security technology  
that enables older device which do not support  
TKIP/AES to be connected.  
• [None]: Select this if the wireless LAN is  
unsecured. Setup of wireless LAN  
connectivity is finished. Next, enter the IP  
address settings by following the Steps of  
WPA-PSK (TKIP), WPA2-PSK  
(TKIP)  
TKIP is a security technology developed in  
response to the deficiencies of WEP. TKIP  
assures a higher security level than WEP.  
• [WEP]: The wireless LAN is protected by  
a WEP key.  
• [WPA/WPA2-PSK]: The wireless LAN is  
protected by a WPA-PSK or WPA2-PSK.  
• [WPA2-PSK]: The wireless LAN is  
protected by a WPA2-PSK.  
WPA-PSK (AES), WPA2-PSK (AES)  
AES is a security technology that uses an  
advanced security method distinct from WEP  
and TKIP.  
AES assures a higher security level than WEP or  
TKIP.  
5
Enter the WEP key/WPA key by  
following the on-screen messages,  
then press c.  
Setup of wireless LAN connectivity is  
finished. Next, enter the IP address settings  
by following the Steps of “Auto setting” or  
About wireless LAN security  
Since communication via the wireless LAN  
function is established by radio waves, the  
wireless signal may be susceptible to  
interception. To protect wireless  
communication, this system supports various  
security functions. Be sure to correctly  
configure the security settings in accordance  
with your network environment.  
No Security  
Although you can easily make settings, anyone  
can intercept wireless communication or intrude  
into your wireless network, even without any  
sophisticated tools. Keep in mind that there is a  
risk of unauthorized access or interception of  
data.  
US  
56  
 
Icon  
Explanation  
Makes the audio settings  
Settings and Adjustments  
according to the type of  
connecting jacks.  
Using the Setup Display  
You can make various adjustments of items such  
Makes detailed settings for BD/  
as picture and sound.  
DVD playback.  
Select  
(Setup) on the home menu when you  
Makes detailed settings for the  
need to change the settings of the system.  
The default settings are underlined.  
Parental Control function.  
Makes detailed settings for  
Super Audio CD playback.  
• Playback settings stored in the disc take priority over  
the Setup Display settings and not all the functions  
described may work.  
Makes the system-related  
settings.  
1
2
Press HOME.  
The home menu appears on the TV screen.  
Makes detailed settings for  
Internet and network.  
Press C/c to select  
[Setup].  
Re-runs the Easy Setup to make  
the basic settings.  
Resets the system to the factory  
settings.  
3
Press X/x to select the setup category  
[Network Update]  
icon to change, then press  
.
Example: [Screen Settings]  
You can update and improve the functions of the  
system.  
You can setup the following options.  
For information about update functions, refer to  
the following website:  
Icon  
Explanation  
Updates the software of the  
system.  
For customers in the U.S.:  
Makes the screen settings  
according to the type of  
connecting jacks.  
For customers in Canada:  
US  
57  
           
x [DVD Aspect Ratio]  
[Letter Box]: Displays a wide picture with black  
bands on the top and bottom.  
For customers in Mexico and Latin America:  
http://esupport.sony.com/LA  
During a software update, “UPDATING”  
appears in the front panel display. After the  
update completes, the main unit automatically  
turns off. Please wait for the software update to  
complete; do not turn the main unit on or off, or  
operate the main unit or TV.  
[Pan & Scan]: Displays a full-height picture on  
the entire screen, with trimmed sides.  
[Screen Settings]  
x [3D Output Setting]  
[Auto]: Normally select this.  
x [Cinema Conversion Mode]  
[Auto]: Normally select this. The unit  
automatically detects whether the material is  
video-based or film-based, and switches to the  
appropriate conversion method.  
[Video]: The conversion method suited for  
video-based material will always be selected  
regardless of the material.  
[Off]: Select this to display all contents in 2D.  
• 3D video from the HDMI (IN 1) or HDMI (IN 2) jack  
is output regardless of this setting.  
x [TV Screen Size Setting for 3D]  
Sets the screen size of your 3D compatible TV.  
x [Output Video Format]  
• This setting does not apply to 3D video from the  
HDMI (IN 1) or HDMI (IN 2) jack.  
[HDMI]: Normally select [Auto]. Select  
[Original Resolution] to output the resolution  
recorded on the disc. (When the resolution is  
lower than SD resolution, it is scaled up to SD  
resolution.)  
[Component Video]: Select the resolution that  
suits your TV.  
[Video]: Automatically sets the lowest  
resolution.  
x [TV Type]  
[16:9]: Select this when connecting to a wide-  
screen TV or a TV with a wide-mode function.  
[4:3]: Select this when connecting to a 4:3  
screen TV without a wide-mode function.  
x [Screen Format]  
[Original]: Select this when connecting to a TV  
with a wide-mode function. Displays a 4:3  
screen picture in 16:9 aspect ratio even on a  
wide-screen TV.  
[Fixed Aspect Ratio]: Changes the picture size  
to fit the screen size with the original picture  
aspect ratio.  
• If no picture appears when setting [HDMI] or  
[Component Video] resolution, try another resolution  
setting.  
• When connecting via the COMPONENT VIDEO  
OUT jack and [Component Video] is selected, BD-  
ROM playback of protected content is only supported  
at 480i* output resolution (pages 22, 29).  
* 480i/576i for Mexican and Latin American  
models.  
US  
58  
                     
x [BD/DVD-ROM 1080/24p Output]  
[Auto]: Outputs 1920 × 1080p/24 Hz video  
signals only when connecting a 1080/24p-  
compatible TV using the HDMI (OUT) jack.  
[Off]: Select this when your TV is not  
compatible with 1080/24p video signals.  
[Audio Settings]  
x [BD Audio MIX Setting]  
[On]: Outputs the audio obtained by mixing the  
interactive audio and secondary audio to the  
primary audio.  
x [YCbCr/RGB (HDMI)]  
[Off]: Outputs the primary audio only.  
[Auto]: Automatically detects the type of  
external device, and switches to the matching  
color setting.  
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video  
signals.  
x [Audio DRC]  
You can compress the dynamic range of the  
sound track.  
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video  
signals.  
[RGB]: Select this when connecting to a device  
with an HDCP-compliant DVI jack.  
[Auto]: Performs playback at the dynamic range  
specified by the disc (BD-ROM only).  
[Off]: No compression of dynamic range.  
[On]: The system reproduces the sound track  
with the kind of dynamic range that the  
recording engineer intended.  
x [HDMI Deep Color Output]  
[Auto]: Normally select this.  
[16bit], [12bit], [10bit]: Outputs 16bit/12bit/  
10bit video signals when the connected TV is  
compatible with Deep Color.  
[Off]: Select this when the picture is unstable or  
colors appear unnatural.  
x [Attenuate - AUDIO]  
Distortion may occur when you listen to a  
component connected to the AUDIO (AUDIO  
IN L/R) jacks. You can prevent distortion by  
reducing the input level on the unit.  
x [Pause Mode] (BD/DVD VIDEO/DVD-R/  
DVD-RW only)  
[On]: Attenuates the input level. The output  
level is changed.  
[Auto]: The picture, including subjects that  
move dynamically, is output with no jitter.  
Normally select this position.  
[Frame]: The picture, including subjects that do  
not move dynamically, is output in high  
resolution.  
[Off]: Normal input level.  
x [Audio Output]  
You can select the output method where the  
audio signal is output.  
[Speaker]: Outputs multi-channel sound from  
the system’s speakers only.  
[Speaker + HDMI]: Outputs multi-channel  
sound from the system’s speakers and 2-channel  
linear PCM signals from the HDMI (OUT) jack.  
[HDMI]: Outputs sound from the HDMI (OUT)  
jack only. Sound format depends on the  
connected component.  
• When [Control for HDMI] is set to [On] (page 61),  
[Audio Output] is set to [Speaker + HDMI]  
automatically and this setting cannot be changed.  
• When [Audio Output] is set to [HDMI], the output  
signal format for the “TV” and “SAT/CABLE”  
function is 2-channel linear PCM.  
US  
59  
                         
x [Sound Effect]  
You can set the system’s sound effects (SOUND  
MODE and [Surround Setting]) to on/off.  
[BD/DVD Viewing  
Settings]  
You can make detailed settings for BD/DVD  
playback.  
[On]: Enables all of the system’s sound effects.  
The upper limit of sampling frequency is set to  
48 kHz.  
[Off]: The sound effects are disabled. Select this  
when you do not want to set the upper limit of  
sampling frequency.  
x [BD/DVD Menu]  
You can select the default menu language for  
BD-ROMs or DVD VIDEOs.  
When you select [Select Language Code], the  
display for entering the language code appears.  
Enter the code for your language by referring to  
x [Surround Setting]  
You can select the surround setting. For details,  
x [Audio]  
x [Speaker Settings]  
You can select the default track language for  
BD-ROMs or DVD VIDEOs.  
When you select [Original], the language given  
priority in the disc is selected.  
To obtain the best possible surround sound, set  
the speakers. For details, see “Setting the  
When you select [Select Language Code], the  
display for entering the language code appears.  
Enter the code for your language by referring to  
x [Auto Calibration]  
You can calibrate the appropriate settings  
automatically. For details, see “Calibrating the  
x [Subtitle]  
You can select the default subtitle language for  
BD-ROMs or DVD VIDEOs.  
When you select [Select Language Code], the  
display for entering the language code appears.  
Enter the code for your language by referring to  
x [BD Hybrid Disc Playback Layer]  
[BD]: Plays BD layer.  
[DVD/CD]: Plays DVD or CD layer.  
x [BD Internet Connection]  
[Allow]: Normally select this.  
[Do not allow]: Prohibits Internet connection.  
US  
60  
                           
[Parental Control  
Settings]  
[Music Settings]  
You can make detailed settings for Super Audio  
CD playback.  
x [Password]  
x [Super Audio CD Playback Layer]  
[Super Audio CD]: Plays the Super Audio CD  
layer.  
Set or change the password for the Parental  
Control function. A password allows you to set  
a restriction on BD-ROM, DVD VIDEO, or  
Internet video playback. If necessary, you can  
differentiate the restriction levels for BD-ROMs  
and DVD VIDEOs.  
[CD]: Plays the CD layer.  
x [Super Audio CD Playback Channel]  
[DSD 2ch]: Plays the 2ch area.  
[DSD Multi]: Plays the multi-channel area.  
x [Parental Control Area Code]  
Playback of some BD-ROMs or DVD VIDEOs  
can be limited according to the geographic area.  
Scenes may be blocked or replaced with  
different scenes. Follow the on-screen  
[System Settings]  
You can make the system-related settings.  
instructions and enter your four-digit password.  
x [BD Parental Control]  
x [OSD]  
Playback of some BD-ROMs can be limited  
according to the age of the users. Scenes may be  
blocked or replaced with different scenes.  
Follow the on-screen instructions and enter your  
four-digit password.  
You can select your language for the system on-  
screen displays.  
x [Illumination/Display]  
You can select the status of the soft-touch  
buttons (page 11) and front panel display  
x [DVD Parental Control]  
Playback of some DVD VIDEOs can be limited  
according to a predetermined level such as the  
age of the users. Scenes may be blocked or  
replaced with different scenes. Follow the  
on-screen instructions and enter your four-digit  
password.  
[Standard/On]: The soft-touch buttons and the  
front panel display stay illuminated.  
[Simple/Off]: The soft-touch buttons and the  
front panel display turn off when the system is  
not being operated.  
x [Internet Video Parental Control]  
Playback of some Internet videos can be limited  
according to the age of the users. Scenes may be  
blocked or replaced with different scenes.  
Follow the on-screen instructions and enter your  
four-digit password.  
x [HDMI Settings]  
[Control for HDMI]  
[On]: On. You can operate mutually between  
components that are connected with an HDMI  
cable.  
[Off]: Off.  
x [Internet Video Unrated]  
[Allow]: Allows the playback of unrated  
Internet videos.  
[Block]: Blocks the playback of unrated Internet  
videos.  
[Audio Return Channel]  
This function is available when you connect the  
system and TV that is compatible with the Audio  
Return Channel function.  
US  
61  
                                       
[Auto]: The system can receive the digital audio  
signal of the TV automatically via an HDMI  
cable.  
[Off]: Off.  
[Network Settings]  
You can make detailed settings for Internet and  
network.  
• This function is available only when [Control for  
HDMI] is set to [On].  
x [Internet Settings]  
Connect the system to the network beforehand.  
x [Quick Start Mode]  
[On]: Shortens the startup time from standby  
mode. You can operate the system quickly after  
turning it on.  
x [Network Connection Diagnostics]  
You can run the network diagnostic to check if  
the network connection has been made properly.  
[Off]: The default setting.  
x [Auto Standby]  
[On]: Turns on the [Auto Standby] function.  
When you do not operate the system for about  
30 minutes, the system enters standby mode  
automatically.  
x [Connection Server Settings]  
Sets whether or not to display the connected  
DLNA server.  
[Off]: Turns off the function.  
x [Renderer Options]  
[Auto Access Permission]: Sets whether or not  
to allow automatic access from newly detected  
DLNA controller.  
[Smart Select]: Allows a Sony DLNA controller  
to find the system as the target component to  
operate by using the infrared ray. You can set  
this function to on or off.  
x [Auto Display]  
[On]: Automatically displays information on the  
screen when changing the viewing titles, picture  
modes, audio signals, etc.  
[Off]: Displays information only when you  
press DISPLAY.  
[Renderer Name]: Displays the system’s name  
as it is listed on other DLNA devices on the  
network.  
x [Screen Saver]  
[On]: Turns on the screen saver function.  
[Off]: Off.  
x [Renderer Access Control]  
Sets whether or not to accept commands from  
DLNA controllers.  
x [Software Update Notification]  
[On]: Sets the system to inform you of newer  
software version information (page 57).  
[Off]: Off.  
x [Party Auto Start]  
[On]: Starts a PARTY or joins an existing  
PARTY at the request of a networked device  
compatible with the PARTY STREAMING  
function.  
x [Gracenote Settings]  
[Auto]: Automatically downloads disc  
information when you stop playback of the disc.  
To download, the system must be connected to  
the network.  
[Off]: Off.  
[Manual]: Downloads disc information when  
[Video Search] or [Music Search] is selected.  
x [Media Remote Device Registration]  
Registers your “Media remote” device.  
x [System Information]  
You can display the system’s software version  
information and the MAC address.  
x [Registered Media Remote Devices]  
Displays a list of your registered “Media  
remote” devices.  
US  
62  
                                     
[Easy Setup]  
Re-runs the Easy Setup to make the basic  
settings. Follow the on-screen instructions.  
[Resetting]  
x [Reset to Factory Default Settings]  
You can reset the system settings to the factory  
default by selecting the group of settings. All the  
settings within the group will be reset.  
x [Initialize Personal Information]  
You can erase your personal information stored  
in the system.  
US  
63  
           
• Do not place the system in a place where medical  
equipment is in use. It may cause a malfunction of  
medical equipment.  
Additional Information  
Precautions  
On safety  
• To prevent fire or shock hazard, do not place objects  
filled with liquids, such as vases, on the system, or  
place the system near water, such as near a bathtub or  
shower room. Should any solid object or liquid fall  
into the cabinet, unplug the system and have it  
checked by qualified personnel before operating it  
any further.  
• If you use a pacemaker or other medical device,  
consult your physician or the manufacturer of your  
medical device before using the wireless LAN  
function.  
On operation  
• If the system is brought directly from a cold to a warm  
location, or is placed in a very damp room, moisture  
may condense on the lenses inside the unit. Should  
this occur, the system may not operate properly. In  
this case, remove the disc and leave the system turned  
on for about half an hour until the moisture  
evaporates.  
• Do not touch the AC power cord (mains lead) with  
wet hands. Doing so may cause an electric shock.  
• When you move the system, take out any disc. If you  
do not, the disc may be damaged.  
On power sources  
• If anything falls into the cabinet, unplug the unit and  
have it checked by qualified personnel before  
operating it any further.  
• Unplug the unit from the wall outlet (mains) if you do  
not intend to use it for an extended period of time. To  
disconnect the cord, pull it out by the plug, never by  
the cord.  
On adjusting volume  
• Do not turn up the volume while listening to a section  
with very low level inputs or no audio signals. If you  
do, the speakers may be damaged when a peak level  
section is suddenly played.  
On placement  
• Place the system in a location with adequate  
ventilation to prevent heat build-up in the system.  
• At high volume, over long periods of time, the cabinet  
becomes hot to the touch. This is not a malfunction.  
However, touching the cabinet should be avoided. Do  
not place the system in a confined space where  
ventilation is poor as this may cause overheating.  
• Do not block the ventilation slots by putting anything  
on the system. The system is equipped with a high  
power amplifier. If the ventilation slots are blocked,  
the system can overheat and malfunction.  
On cleaning  
• Clean the cabinet, panel, and controls with a soft cloth  
slightly moistened with a mild detergent solution. Do  
not use any type of abrasive pad, scouring powder or  
solvent such as alcohol or benzine.  
If you have any questions or problems concerning  
your system, please consult your nearest Sony dealer.  
On cleaning discs, disc/lens  
cleaners  
• Do not use cleaning discs or disc/lens cleaners  
(including wet or spray types). These may cause  
the apparatus to malfunction.  
• Do not place the system on surfaces (rugs, blankets,  
etc.) or near materials (curtains, draperies) that may  
block the ventilation slots.  
• Do not install the system in a confined space, such as  
a bookshelf or similar unit.  
• Do not install the system near heat sources such as  
radiators, air ducts, or in a place subject to direct  
sunlight, excessive dust, mechanical vibration, or  
shock.  
On replacement of parts  
• In the events that this system is repaired, repaired  
parts may be collected for reuse or recycling  
purposes.  
• Do not install the system in an inclined position. It is  
designed to be operated in a horizontal position only.  
• Keep the system and discs away from components  
with strong magnets, such as microwave ovens, or  
large loudspeakers.  
On your TV’s color  
• If the speakers should cause the TV screen to have  
color irregularity, turn off the TV then turn it on after  
15 to 30 minutes. If color irregularity should persist,  
place the speakers further away from the TV set.  
• Do not place heavy objects on the system.  
• Do not place metal objects in front of the front panel.  
They may limit reception of radio waves.  
US  
64  
   
IMPORTANT NOTICE  
Caution: This system is capable of holding a still  
Notes about the Discs  
On handling discs  
• To keep the disc clean, handle the disc by its  
edge. Do not touch the surface.  
video image or on-screen display image on your  
television screen indefinitely. If you leave the still  
video image or on-screen display image displayed  
on your TV for an extended period of time you risk  
permanent damage to your television screen.  
Projection televisions are especially susceptible to  
this.  
• Do not stick paper or tape on the disc.  
On moving the system  
• Before moving the system, make sure that there is no  
disc inserted, and remove the AC power cord (mains  
lead) from the wall outlet (mains).  
• Do not expose the disc to direct sunlight or  
heat sources such as hot air ducts, or leave it in  
a car parked in direct sunlight as the  
temperature may rise considerably inside the  
car.  
• After playing, store the disc in its case.  
On cleaning  
• Before playing, clean the disc with a cleaning  
cloth.  
Wipe the disc from the center out.  
• Do not use solvents such as benzine, thinner,  
commercially available cleaners, or anti-static  
spray intended for vinyl LPs.  
This system can only play a standard circular  
disc. Using neither standard nor circular discs  
(e.g., card, heart, or star shape) may cause a  
malfunction.  
Do not use a disc that has a commercially  
available accessory attached, such as a label or  
ring.  
US  
65  
 
Troubleshooting  
If you experience any of the following difficulties while using the system, use this troubleshooting  
guide to help remedy the problem before requesting repairs. Should any problem persist, consult your  
nearest Sony dealer.  
Note that if service personnel changes some parts during repair, these parts may be retained.  
General  
Symptom  
Problems and solutions  
The power is not turned on.  
The remote does not function.  
• Check that the AC power cord (mains lead) is connected securely.  
• The distance between the remote and the unit is too far.  
• The batteries in the remote are weak.  
The disc tray does not open and • Try the following: 1 Press and hold N and Z on the unit for more than 5  
you cannot remove the disc even seconds to open the disc tray. 2 Remove the disc. 3 Disconnect the AC power  
after you press Z.  
cord (mains lead) from the wall outlet (mains), then reconnect after several  
minutes.  
The system does not work  
normally.  
• Disconnect the AC power cord (mains lead) from the wall outlet (mains), then  
reconnect after several minutes.  
Messages  
Symptom  
Problems and solutions  
[A new software version is  
available. Please go to the  
“Setup” section of the menu and  
select “Network Update” to  
perform the update.] appears on  
the TV screen.  
• See [Network Update] (page 57) to update the system to a newer software  
version.  
“PROTECTOR” and “PUSH  
Press "/1 to turn off the system, and check the following items after  
PWR” appear alternately in the “STANDBY” disappears.  
front panel display.  
• Are the + and – speaker cords short-circuited?  
• Are you using only the specified speakers?  
• Is anything blocking the ventilation holes of the system?  
• After checking the above items and fixing any problems, turn on the system. If  
the cause of the problem cannot be found even after checking all the above  
items, consult your nearest Sony dealer.  
“LOCKED” appears in the front • Set the child lock function to off (page 51).  
panel display.  
“DEMO LOCK” appears in the • Contact your nearest Sony dealer or local authorized Sony service facility.  
front panel display.  
“Exxxx” appears in the front  
panel display.  
• Contact your nearest Sony dealer or local authorized Sony service facility and  
give the error code.  
appears without any  
messages on the entire TV  
screen.  
• Contact your nearest Sony dealer or local authorized Sony service facility.  
US  
66  
 
Picture  
Symptom  
Problems and solutions  
There is no picture.  
• Check the output method on your system (page 22).  
There is no picture when you  
make an HDMI cable  
connection.  
• The unit is connected to an input device that is not HDCP (High-bandwidth  
Digital Content Protection) compliant (“HDMI” on the front panel does not  
light up) (page 22).  
3D images from the HDMI (IN • Depending on the TV or video component, 3D images may not appear.  
1) or HDMI (IN 2) jack do not  
appear on the TV screen.  
There is no picture or output  
• When playing a BD-ROM, a high-resolution image may not be output because  
resolution is low when you make of copy protection limitations. We recommend to make a HDMI connection  
a component video cable  
connection.  
No picture appears when the  
• Press and hold N and VOL – on the unit for more than 5 seconds to reset the  
video output resolution selected video output resolution to the lowest resolution.  
in [Output Video Format] is  
incorrect.  
The dark area of the picture is too • Set [Picture Quality Mode] to [Standard] (default) (page 41).  
dark/the bright area is too bright  
or unnatural.  
The picture is not output  
correctly.  
• Check the [Output Video Format] settings in [Screen Settings] (page 58).  
• If the analog and digital signals are output at the same time, set [BD/DVD-  
ROM 1080/24p Output] in [Screen Settings] to [Off] (page 59).  
• For BD-ROMs, check the [BD/DVD-ROM 1080/24p Output] settings in  
[Screen Settings] (page 59).  
Picture noise appears.  
• Clean the disc.  
• If the picture output from your system goes through your VCR to get to your  
TV, the copy-protection signal applied to some BD/DVD programs could affect  
picture quality. If you still experience problems even when you connect your  
unit directly to your TV, try connecting your unit to the other input jacks.  
An image is not displayed on the • Check the setting of [TV Type] in [Screen Settings](page 58).  
entire TV screen.  
• The aspect ratio on the disc is fixed.  
Color irregularity occurs on the • If the speakers are used with a CRT-based TV or projector, install the speakers  
TV screen.  
at least 1.0 ft (0.3 meters) from the TV set.  
• If the color irregularity persists, turn off the TV set once, then turn it on after 15  
to 30 minutes.  
• Make sure that no magnetic object (magnetic latch on a TV stand, health care  
device, toy, etc.) is placed near the speakers.  
There is no picture after playing • Select the input on your TV for this system.  
a video/photo file on the iPod/  
iPhone. (U.S. and Canada  
models only.)  
US  
67  
Sound  
Symptom  
Problems and solutions  
There is no sound.  
• The speaker cord is not connected securely.  
• Check the speaker settings (page 49).  
The Super Audio CD sound of a • HDMI (IN 1) and HDMI (IN 2) does not accept an audio format that contains  
component that is connected to  
the HDMI (IN 1) or HDMI (IN  
2) jack is not output.  
copy protection. Connect the analog audio output of the component to the  
AUDIO (AUDIO IN L/R) jacks of the unit.  
There is no sound from the TV • Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On]  
via the HDMI (OUT) jack when (page 61). Also, set [Audio Return Channel] in [HDMI Settings] of [System  
using the Audio Return Channel Settings] to [Auto] (page 61).  
function.  
• Make sure that your TV is compatible with the Audio Return Channel function.  
• Make sure that an HDMI cable is connected to a jack on your TV that is  
compatible with the Audio Return Channel function.  
The system does not output  
• Set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Off]  
sound correctly when connected (page 61).  
to a set-top box.  
Severe hum or noise is heard.  
• Move your TV away from the audio components.  
• Clean the disc.  
The sound loses stereo effect  
when you play a CD.  
• Select stereo sound by pressing AUDIO (page 43).  
The sound comes from the center • Depending on the disc, the sound may come from the center speaker only.  
speaker only.  
No sound or only a very low-  
level sound is heard from the  
surround speakers.  
• Check the speaker connections and settings (pages 20, 49).  
• Check the surround setting (page 31).  
• Depending on the source, the effect of the surround speakers may be less  
noticeable.  
• A 2 channel source is being played.  
Distortion occurs in the sound of • Reduce the input level for the connected component by setting [Attenuate -  
a connected component.  
Tuner  
Symptom  
Problems and solutions  
Radio stations cannot be tuned • Check that the antenna (aerial) is connected securely. Adjust the antenna  
in.  
(aerial) or connect an external antenna (aerial) if necessary.  
• The signal strength of the stations is too weak (when tuning in with automatic  
tuning). Use manual tuning.  
Playback  
Symptom  
Problems and solutions  
The disc does not play.  
• The region code on the BD/DVD does not match the system.  
• Moisture has condensed inside the unit and may cause damage to the lenses.  
Remove the disc and leave the unit turned on for about half an hour.  
• The system cannot play a recorded disc that is not correctly finalized (page 71).  
File names are not displayed  
correctly.  
• The system can only display ISO 8859-1-compliant character formats. Other  
character formats may be displayed differently.  
• Depending on the writing software used, the input characters may be displayed  
differently.  
US  
68  
Symptom  
Problems and solutions  
A disc does not start playing  
from the beginning.  
• Resume play has been selected. Press OPTIONS and select [Play from  
beginning], then press  
.
Playback does not start from the • The resume point may be cleared from memory depending on the disc when  
resume point where you last  
stopped playing.  
– you open the disc tray.  
– you disconnect the USB device.  
– you play other content.  
– you turn off the unit.  
The language for the soundtrack/ • Try using the BD’s or DVD’s menu.  
subtitle or angles cannot be  
changed.  
• Multi-lingual tracks/subtitles or multi-angles are not recorded on the BD or  
DVD being played.  
Bonus contents or other data that • Try the following: 1 Remove the disc. 2 Turn the system off. 3 Remove and  
are contained in a BD-ROM  
cannot be played.  
reconnect the USB device (page 35). 4 Turn the system on. 5 Insert the BD-  
ROM with BONUSVIEW/BD-LIVE.  
USB device  
Symptom  
Problems and solutions  
The USB device is not  
recognized.  
• Try the following: 1 Turn the system off. 2 Remove and reconnect the USB  
device. 3 Turn the system on.  
• Make sure that the USB device is securely connected to the  
• Check if the USB device or a cable is damaged.  
• Check if the USB device is on.  
(USB) port.  
• If the USB device is connected via a USB hub, disconnect it and connect the  
USB device directly to the unit.  
BRAVIA Internet Video  
Symptom  
Problems and solutions  
The picture/sound is poor/certain • Picture/sound quality may be poor depending on Internet content providers.  
programs display with a loss of  
detail, especially during fast-  
motion or dark scenes.  
• Picture/sound quality may be improved by changing the connection speed.  
Sony recommends a connection speed of at least 2.5 Mbps for standard-  
definition video and 10 Mbps for high-definition video.  
• Not all videos contain sound.  
The picture is small.  
• Press X to zoom in.  
“BRAVIA” Sync ([Control for HDMI])  
Symptom  
Problems and solutions  
The [Control for HDMI]  
function does not work  
(“BRAVIA” Sync).  
• Check that [Control for HDMI] is set to [On] (page 61).  
• If you change the HDMI connection, turn the system off and on again.  
• If power failure occurs, set [Control for HDMI] to [Off], then set [Control for  
HDMI] to [On] (page 61).  
• Check the following and refer to the operating instructions supplied with the  
component.  
– the connected component is compatible with the [Control for HDMI]  
function.  
– the connected component’s setting for the [Control for HDMI] function is  
correct.  
US  
69  
Network connection  
Symptom  
Problems and solutions  
The system cannot connect to the • Check the network connection (page 27) and the network settings (page 62).  
network.  
Built-in/USB wireless LAN connection  
Symptom  
Problems and solutions  
You cannot connect your PC to • The wireless settings of the router may change automatically if you use the  
the Internet after [Wi-Fi  
Protected Setup (WPS)] is  
performed.  
Wi-Fi Protected Setup function before adjusting the settings of the router. In  
this case, change the wireless settings of your PC accordingly.  
You cannot connect the system • Check if the wireless LAN router is on.  
to your wireless LAN router.  
• Depending on the usage environment, including the wall material, radio wave  
reception conditions, or obstacles between the system and the wireless LAN  
router, the possible communication distance may be shortened. Move the  
system and the wireless LAN router closer to each other.  
• Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or  
digital cordless device, may interrupt the communication. Move the unit away  
from such devices, or turn off such devices.  
The desired wireless router is not • Press RETURN to return to the previous screen, and try [Scan] again. If the  
detected even if [Scan] is  
performed.  
desired wireless router is still not detected, press RETURN to select [Manual  
registration].  
The system cannot connect to the • The distance between the unit and the wireless LAN router is too far (page 27).  
network or the network  
connection is unstable.  
US  
70  
Notes on discs  
Playable Discs  
This product is designed to play back discs that  
conform to the Compact Disc (CD) standard.  
DualDiscs and some music discs encoded with  
copyright protection technologies do not  
conform to the Compact Disc (CD) standard.  
Therefore, these discs may not be compatible  
with this product.  
1)  
Blu-ray Disc  
BD-ROM  
2)  
BD-R/BD-RE  
DVD-ROM  
3)  
DVD  
DVD-R/DVD-RW  
DVD+R/DVD+RW  
3)  
Note on playback operations of a  
BD/DVD  
CD  
CD-DA (Music CD)  
CD-ROM  
CD-R/CD-RW  
Super Audio CD  
Some playback operations of a BD/DVD may be  
intentionally set by software producers. Since  
this system plays a BD/DVD according to the  
disc contents the software producers designed,  
some playback features may not be available.  
1)Since the Blu-ray Disc specifications are new and  
evolving, some discs may not be playable depending  
on the disc type and the version. Also, the audio  
output differs depending on the source, connected  
output jack, and selected audio settings.  
2)BD-RE: Ver.2.1  
Note about double-layer BDs/  
DVDs  
The playback picture and sound may be  
momentarily interrupted when the layers switch.  
BD-R: Ver.1.1, 1.2, 1.3 including organic pigment  
type BD-R (LTH type)  
BD-Rs recorded on a PC cannot be played if  
postscripts are recordable.  
3)A CD or DVD disc will not play if it has not been  
correctly finalized. For more information, refer to the  
operating instructions supplied with the recording  
device.  
Region code (BD-ROM/DVD  
VIDEO only)  
Your system has a region code printed on the  
rear of the unit and will only play a BD-ROM/  
DVD VIDEO (playback only) labeled with  
ALL  
identical region codes or  
.
Discs that cannot be played  
• BDs with cartridge  
• BDXLs  
• DVD-RAMs  
• HD DVDs  
• DVD Audio discs  
• PHOTO CDs  
• Data part of CD-Extras  
• Super VCDs  
• Audio material side on DualDiscs  
• For U.S. and Canada models: A disc recorded  
in a color system other than NTSC, such as  
PAL  
(This system conforms to the NTSC color  
system.)  
US  
71  
     
• Some files may not play depending on the file format,  
the file encoding, the recording condition, or DLNA  
server condition.  
Playable Types of Files  
Video1)  
• Some files edited on a PC may not play.  
• The system can recognize the following files or  
folders in BDs, DVDs, CDs and USB devices:  
– up to folders in the 5th tree  
File format  
Extensions  
2)5)  
MPEG-1 Video/PS  
“.mpg,” “.mpeg,” “.m2ts,”  
“.mts”  
MPEG-2 Video/PS,  
2)6)  
TS  
– up to 500 files in a single tree  
• The system can recognize the following files or  
folders stored in the DLNA server:  
Xvid  
“.avi”  
2)5)  
MPEG4/AVC  
“.mkv,” “.mp4,” “.m4v,”  
“.m2ts,” “.mts”  
– up to folders in the 20th tree  
– up to 999 files in a single tree  
2)5)  
WMV9  
“.wmv,” “.asf”  
3)5)  
• Some USB devices may not work with this system.  
• The system can recognize Mass Storage Class (MSC)  
devices (such as flash memory or an HDD), Still  
Image Capture Devices (SICDs), and 101-key  
AVCHD  
Music  
keyboards (front  
(USB) port only).  
File format  
Extensions  
• To avoid data corruption or damage to USB memory  
or other devices, turn the system off before  
connecting or removing USB memory or other  
devices.  
MP3 (MPEG-1 Audio  
Layer III)  
“.mp3”  
2)4)5)  
AAC  
“.m4a”  
“.wma”  
“.wav”  
2)4)  
• The system may not play high bit rate video files from  
a DATA CD smoothly. It is recommended to play  
high bit rate video files using a DATA DVD.  
WMA9 Standard  
LPCM  
Photo1)  
File format  
JPEG  
Extensions  
“.jpg,” “.jpeg”  
“.gif”  
GIF  
PNG  
“.png”  
1)The system does not play these files via the DLNA  
renderer function.  
2)The system does not play files encoded with DRM.  
3)The system plays AVCHD-format files that are  
recorded via a digital video camera, etc. To watch  
AVCHD-format files, the disc with AVCHD-format  
files on it must be finalized.  
4)The system does not play files encoded with  
Lossless, etc.  
5)The system does not play these files via the DLNA  
function.  
6)The system plays SD resolution only via the DLNA  
function.  
US  
72  
   
Supported Audio Formats  
Audio formats supported by this system are as follows.  
Format  
LPCM 2ch  
LPCM 5.1ch  
LPCM 7.1ch  
Dolby Digital Dolby  
TrueHD,  
DTS  
DTS-ES  
Discrete 6.1,  
DTS-ES  
Matrix 6.1,  
DTS96/24  
DTS-HD  
High  
Resolution  
Audio  
DTS-HD  
Master  
Audio  
Function  
DolbyDigital  
Plus  
“BD/DVD”  
a
a
a
a
a
a
a
a
a
a
a
“HDMI1”  
“HDMI2”  
“SAT/CABLE”  
“TV”  
a
a
a
(DIGITAL IN)  
a: Supported format.  
–: Unsupported format.  
• HDMI (IN 1) and HDMI (IN 2) do not input sound in the case of an audio format that contains copy protections  
such as Super Audio CD or DVD-Audio.  
• For the LPCM 2ch format, the supported sampling frequency of the digital signal is up to 96 kHz when using the  
“HDMI1” or “HDMI2” function, and 48 kHz when using the “TV” or “SAT/CABLE” function.  
US  
73  
 
USB Section  
(USB) port:  
Type A (For connecting  
USB memory, memory  
card reader, digital still  
camera, and digital video  
camera)  
Specifications  
Amplifier Section  
U.S.models:  
AUDIO POWER SPECIFICATIONS  
POWER OUTPUT AND TOTAL HARMONIC  
DISTORTION:  
LAN Section  
LAN (100) terminal  
100BASE-TX Terminal  
(FTC)  
Front L + Front R:  
Wireless LAN Section (BDV-E580/BDV-T58)  
Standards Compliance IEEE 802.11 b/g/n  
Frequency and Channel 2.4 GHz - 2.4835 GHz  
[CH1 -11]  
With 3 ohms loads, both  
channels driven, from 180  
- 20,000 Hz; rated 60 watts  
per channel minimum  
RMS power, with no more  
than 1% total harmonic  
distortion from 250 milli  
watts to rated output.  
FM Tuner Section  
System  
PLL quartz-locked digital  
synthesizer  
Tuning range  
U.S. and Canada models: 87.5 MHz - 108.0 MHz  
(100 kHz step)  
Other models:  
POWER OUTPUT (rated)  
Front L/Front R:  
Other models:  
87.5 MHz - 108.0 MHz (50  
kHz step)  
108 W + 108 W (at 3 ohms,  
1 kHz, 1% THD)  
Antenna (aerial)  
Antenna (aerial) terminals 75 ohms, unbalanced  
FM wire antenna (aerial)  
POWER OUTPUT (reference)  
Front L/Front R/Center/Surround L/Surround R:  
167 W (per channel at  
Speakers  
3 ohms, 1 kHz)  
Front/Surround (SS-TSB106) for BDV-E580/  
BDV-T58  
Subwoofer:  
Inputs (Analog)  
AUDIO (AUDIO IN)  
Inputs (Digital)  
SAT/CABLE (COAXIAL)  
165 W (at 3 ohms, 80 Hz)  
Sensitivity: 450/250 mV  
Surround (SS-TSB106) for BDV-E880  
Dimensions (approx.)  
96 mm × 245 mm × 96 mm  
(3 7/8 in × 9 3/4 in × 3 7/8 in)  
(w/h/d)  
TV (Audio Return Channel/OPTICAL)  
Supported formats: LPCM  
Mass (approx.)  
0.6 kg (1 lb 6 oz)  
2CH (up to 48 kHz), Dolby  
Digital, DTS  
Front (SS-TSB108) for BDV-E880/BDV-E980  
Dimensions (approx.)  
96 mm × 775 mm × 72 mm  
(3 7/8 in × 30 5/8 in ×  
2 7/8 in) (w/h/d) (wall-  
mounted part)  
HDMI (IN 1)/HDMI (IN 2)  
Supported formats: LPCM  
2CH (up to 96 kHz), Dolby  
Digital, DTS  
275 mm × 1,205 mm × 245  
mm (10 7/8 in × 47 1/2 in ×  
9 3/4 in) (w/h/d) (whole  
speaker)  
1.4 kg (3 lb 2 oz) (wall-  
mounted part)  
Video Section  
Outputs  
VIDEO: 1 Vp-p 75 ohms  
COMPONENT:  
Y: 1 Vp-p 75 ohms  
PB, PR: 0.7 Vp-p  
75 ohms  
Mass (approx.)  
2.7 kg (6 lb) (whole  
speaker)  
HDMI Section  
Connector  
Type A (19pin)  
BD/DVD/Super Audio CD/CD System  
Signal format system  
U.S. and Canada models: NTSC  
Other models:  
NTSC/PAL  
US  
74  
 
Surround (SS-TSB109) for BDV-E980  
Dimensions (approx.) 96 mm × 775 mm × 72 mm  
(3 7/8 in × 30 5/8 in ×  
2 7/8 in) (w/h/d) (wall-  
mounted part)  
275 mm × 1,205 mm × 245  
mm (10 7/8 in × 47 1/2 in ×  
9 3/4 in) (w/h/d) (whole  
speaker)  
Mass (approx.)  
1.3 kg (2 lb 14 oz) (wall-  
mounted part)  
2.6 kg (5 lb 12 oz) (whole  
speaker)  
Center (SS-CTB103)  
Dimensions (approx.)  
315 mm × 59 mm × 53 mm  
(12 1/2 in × 2 3/8 in ×  
2 1/8 in) (w/h/d)  
Mass (approx.)  
0.4 kg (15 oz)  
Subwoofer (SS-WSB104) for BDV-E580/  
BDV-E880/BDV-T58  
Dimensions (approx.)  
380 mm × 330 mm × 191  
mm (15 in × 13 in ×  
7 5/8 in) (w/h/d)  
Mass (approx.)  
6.3 kg (13 lb 15 oz)  
Subwoofer (SS-WSB105) for BDV-E980  
Dimensions (approx.)  
415 mm × 340 mm × 215  
mm (16 3/8 in × 13 1/2 in ×  
8 1/2 in) (w/h/d)  
Mass (approx.)  
7.8 kg (17 lb 4 oz)  
General  
Power requirements  
U.S. and Canada models: 120 V AC, 60 Hz  
Other models:  
110 V - 240 V AC,  
50/60 Hz  
Power consumption  
BDV-E580/BDV-T58  
On: 170 W  
Standby: 0.3 W (at the  
Power Saving mode)  
On: 165 W  
Standby: 0.3 W (at the  
Power Saving mode)  
430 mm × 75 mm × 320  
mm (17 in × 3 in ×  
12 5/8 in) (w/h/d) incl.  
projecting parts  
BDV-E880/BDV-E980  
Dimensions (approx.)  
Mass (approx.)  
4.1 kg (9 lb 1 oz)  
Design and specifications are subject to change  
without notice.  
• Standby power consumption 0.3W.  
• Over 85% power efficiency of amplifier block is  
achieved with the full digital amplifier, S-Master.  
US  
75  
Language Code List  
The language spellings conform to the ISO 639: 1988 (E/F) standard.  
Parental Control/Area Code List  
US  
76  
   
Index  
Numerics  
F
Q
R
A
G
Registered Media Remote  
Devices 62  
Reset to Factory Default  
Settings 63  
H
HDMI  
I
Initialize Personal Information  
63  
S
B
BD Hybrid Disc Playback  
Layer 60  
Internet Video Parental Control  
61  
BD/DVD-ROM 1080/24p  
Output 59  
L
Super Audio CD Playback  
Channel 61  
Super Audio CD Playback  
Layer 61  
M
Media Remote Device  
Registration 62  
C
N
Network Connection  
Diagnostics 62  
T
TV Screen Size Setting for 3D  
58  
D
O
D.C.A.C. (Digital Cinema Auto  
Calibration) 48  
U
P
W
E
US  
77  
 
The software of this system may be updated in the future. To find out details on any  
available updates, please visit the following URL.  
For customers in the U.S.:  
For customers in Canada:  
For customers in Mexico and Latin America:  
http://esupport.sony.com/LA  
(1)  
©2011 Sony Corporation  
Printed in Malaysia  

Vista Davis & Sanford PROGR18 User Manual
Victor Technology 930 2 User Manual
Toshiba Cash Register Electronic Cash Register User Manual
Toastmaster FBL500SS User Manual
Sony XR C5500 User Manual
Sony Full HD Flash Camcorder HDR CX260V User Manual
Sony FDRAX1 User Manual
Sony Camcorder DVW 970 User Manual
Sony 55 User Manual
Samsung Car Video System B2330H User Manual