Samsung GH68 09404A User Manual

Depending on the software installed or your service provider or country, some

of the descriptions in this guide may not match your phone exactly.

* Depending on your country, your phone and accessories may appear

different from the illustrations in this guide.

Printed in Korea

Code No.:GH68-09404A

World Wide Web

http://www.samsungmobile.com

English(SEA). 03/2006. Rev. 1.0

Drive safely at all times

Do not use a hand-held phone while driving. Park

the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference. Using them

in an aircraft is both illegal and dangerous.

precautions

Switch off the phone near all medical

equipment

Failure to comply with the following

precautions may be dangerous or illegal.

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules in

force.

Interference

Keep your phone away from small children

All wireless phones may be subject to interference,

which could affect their performance.

Keep the phone and all its parts, including accessories,

out of the reach of small children.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

• The phone could explode if the battery is replaced

with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Water resistance

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

Qualified service

Only qualified service personnel may repair your

phone.

Emergency calls

For more detailed safety information, see "Health and

safety information" on page 89.

Key in the emergency number for your present

location, then press

•

Camera and camcorder

Use the camera module on your

phone to take a photo or record a

video.

About this Guide

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

Special

features of your phone

In this guide, the following instruction icons appear:

Indicates that you need to pay careful attention

to the subsequent information regarding safety

or phone features.

•

Image editor

Crop, resize, rotate, and decorate

your photos.

Indicates that you can get more information on

the referenced page.

ꢀ

Music player

Play MP3 music files using your

phone as a music player.

Indicates that you need to press the Navigation

keys to scroll to the specified option and then

select it.

→

Indicates a key on the phone. For example,

[

]

File viewer

[

]

Open documents in various

formats on the phone without

corruption.

Indicates a soft key, whose function is displayed

on the phone screen. For example, <Menu

< >

•

Bluetooth

•

Multimedia Message Service (MMS)

Send and receive MMS messages with a

combination of text, images, video, and audio.

Transfer media files and personal

data and connect to other devices

using free, wireless Bluetooth

technology. You can also use a

Bluetooth stereo headset to let you

enjoy music with high quality

stereo sound.

E-mail

Send and receive e-mails with images, video,

and audio attachments.

•

Web browser

•

Get personal with photo caller

See who’s calling you when their

very own photo displays.

Access the wireless web to get up-

to-the-minute information and a

wide variety of media content.

•

Java

Name card

Enjoy Java™-based embedded

games and download new games.

Create name cards with your

number and profile. Whenever

introducing yourself to others, use

this convenient electronic name

card.

Voice recorder

Record memos or sounds.

Browse the web...................................................... 16

Use Phonebook ...................................................... 17

Send messages...................................................... 18

View messages....................................................... 19

Use Bluetooth ........................................................ 20

Contents

Unpack

Make sure you have each item

Your phone

Enter text

AB, T9, Number, and Symbol modes

Call functions

Buttons, features, and locations

Get started

Advanced calling features

Menu functions

First steps to operating your phone

Install and charge the phone..................................... 7

Power on or off........................................................ 8

Keys and display ..................................................... 9

Access menu functions ............................................ 11

Customise your phone............................................. 12

Make/Answer calls .................................................. 14

All menu options listed

Solve problems

Help and personal needs

Health and safety information

Step outside the phone

Begin with your camera, the music player, the web, and

other special features

Index

Use the camera...................................................... 14

Play music............................................................. 15

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

1 Call log

ꢀ

p. 28

3 Applications

ꢀ

p. 34

5 Messages

ꢀ

p. 46

8 Camera

9 Settings

ꢀ

p. 69

p. 75

1 Recent contacts

2 Missed calls

3 Dialled calls

4 Received calls

5 Delete all

ꢀ

p. 28

p. 29

p. 30

1 Music player

2 Voice recorder

3 Image editor

4 Java world

5 World time

6 Alarm

7 Calculator

8 Convertor

9 Timer

ꢀp. 34

ꢀp. 37

ꢀp. 38

ꢀp. 40

ꢀp. 41

ꢀp. 42

ꢀp. 43

1 Create message

2 My messages

3 Templates

4 Delete all

5 Settings

6 SOS messages

7 Memory status

ꢀp. 47

ꢀp. 50

ꢀp. 54

ꢀp. 55

ꢀp. 60

ꢀ

1 Time and date

2 Phone settings

3 Display settings

4 Sound settings

5 Light settings

6 Network services

7 Bluetooth

8 Security

9 Connect settings

10 Reset settings

ꢀ

p. 75

p. 77

p. 79

p. 82

p. 84

p. 85

p. 87

6 Call time

7 Call costs^*

2 Phonebook

ꢀ

p. 30

6 My files

ꢀp. 61

10 Stopwatch

11 Key management

12 SIM AT^*

1 Contact list

2 Create contact

3 Group

ꢀ

p. 30

p. 31

p. 32

p. 33

p. 34

1 Images

2 Videos

3 Music

4 Sounds

5 Other files

6 Memory status

ꢀp. 61

ꢀp. 62

ꢀp. 63

ꢀp. 64

ꢀp. 66

4 Speed dial

4 Browser

ꢀp. 43

5 My namecard

6 Own number

7 Management

8 Service number^*

1 Home

ꢀp. 44

ꢀp. 45

ꢀp. 46

* Shows only if supported by your

SIM card.

2 Enter URL

3 Bookmarks

4 Saved pages

5 History

6 Clear cache

7 Browser settings

7 Calendar

ꢀp. 66

Unpack

Your phone

Make sure you have each item

Buttons, features, and locations

Earpiece

Flash

Camera lens

Display

Phone

Travel Adapter

Navigation keys

(Up/Down/Left/

Right)

Web access/

Confirm key

Right soft key

Volume keys

Left soft key

Camera key

Power on/off/

Menu exit key

Battery

User’s Guide

Dial key

Microphone

Delete key

You can obtain various accessories from

your local Samsung dealer.

Headset jack

The items supplied with your phone

and the accessories available at your

Samsung dealer may vary, depending

on your country or service provider.

Alphanumeric

keys

Special

function keys

Get started

First steps to operating your phone

Install the battery.

Replace the battery

cover.

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Install and charge the phone

Plug the travel adapter into the phone.

Remove the battery

cover.

Insert the SIM card.

Make sure that the gold-

coloured contacts are

face down.

Plug the adapter into a standard AC wall outlet.

If the phone is already

on, first turn it off by

pressing and holding

[

Get started

Power on or off

When the phone is completely charged (the

battery icon becomes still), unplug the adapter

from the power outlet.

Switch on

1. Open the phone.

2. Press and hold [

the phone.

] to turn on

Remove the adapter from the phone.

Do not turn on

the phone when

mobile phone

3. If necessary, enter the PIN and

press <OK>.

use is prohibited.

1. Open the phone.

Switch off

2. Press and hold [

Low battery indicator

Keypad lock

When the battery is low:

When you close the phone, the keypad lock feature

locks the exposed keys so that nothing will happen if

the keys are accidentally pressed.

•

a warning tone sounds,

the low battery message displays, and

To unlock the keypad, press <Unlock> and press

the empty battery icon

blinks.

<OK>.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

Keys and display

Keys

Enter numbers, letters, and some special

characters.

In Idle mode, press and hold [1] to access

Perform the function indicated on the bottom

your voicemail server. Press and hold [

0] to

line of the display.

enter an international call prefix.

Enter special characters.

In Idle mode, access your favourite menus

directly.ꢀp. 76

In Idle mode, press and hold [ ] to activate

or deactivate Quiet mode. Press and hold

In Menu mode, scroll through menu options.

[

] to enter a pause between numbers.

In Idle mode, launch the web browser.

In Menu mode, select the highlighted menu

option or confirm input.

Adjust the phone volume.

In Idle mode, with the phone open, adjust

the keypad tone volume. With the phone

closed, press and hold to turn on the display.

Make or answer a call.

In Idle mode, retrieve the recent numbers

dialled, missed, or received.

In Idle mode, press and hold to turn on the

camera.

Delete characters from the display or an

item in an application.

In Camera mode, take a photo or record a

video.

End a call.

Press and hold to switch the phone on or off.

In Menu mode, cancel input and return the

phone to Idle mode.

Get started

Display

New voicemail

Call diverting feature active

ꢀp. 79

Layout

Icons

display various icons.

Home Zone, if registered for the

appropriate service

Text and graphics

display messages,

instructions, and

Office Zone, if registered for the

appropriate service

information you enter.

Connected to Bluetooth hands-free

car kit or headset

Soft key function

indicators

Bluetooth activeꢀp. 82

Contacts

show the current functions

assigned to the soft keys.

Synchronised with PC

MP3 playback in progress

MP3 playback paused

Icons^*

Received signal strength

Call in progress

Alarm setꢀp. 41

Out of your service area; you

cannot make or receive calls

Call ringer set to vibrate

Quiet mode (Vibration)

Quiet mode (Mute)

ꢀp. 78

GPRS network

Connecting to GPRS network

Connected to Internet

Roaming network

New message

Mute mode, during a call

Battery power level

* Depending on your country or service provider, the icons

shown on the display may vary.

New e-mail

Access menu functions

Select an

option

1. Press the appropriate soft key.

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

2. Press the Navigation keys to

move to the next or previous

option.

display indicates their current role.

3. Press <Select>, <OK>, or

[

] to confirm the function

Select

Back

displayed or option highlighted.

4. To exit, choose either of the

following methods:

•

Press <Back> to move up

one level.

Press the right

soft key to return

to the previous

menu level.

Press the left

•

Press [

mode.

] to return to Idle

soft key to select

the highlighted

option.

Use shortcuts Press the number key

corresponding to the option you

want. For the index numbers 10, 11

and 12, press [0], [ ], and [ ],

respectively.

Get started

Customise your phone

You can set wallpaper for the idle

screen on the display.

Idle mode

wallpaper

1. In Idle mode, press <Menu

Display

1. In Idle mode, press <Menu

and select Settings Display

settings Wallpaper Main

display

and select Settings

settings Language

2. Select a language.

→

Phone

language

→

2. Select an image category.

3. Select an image.

1. In Idle mode, press <Menu

Call ringer

melody

and select Settings

settings

Ringtone

→

Sound

→

Incoming call

→

4. Press <Save>.

2. Select a ringtone category.

3. Select a ringtone.

You can change the colour for the

display components, such as title

bars and highlighted bars.

Menu mode

skin colour

4. Press <Save>.

1. In Idle mode, press <Menu

and select Settings Display

settings Skin

2. Select a colour pattern.

→

You can set the Navigation keys to

function as shortcuts to access

your favourite menus.

You can protect the phone against

unauthorised use with a phone

password. The phone will require

the password on power-up.

Phone lock

shortcuts

1. In Idle mode, press <Menu

and select Settings Phone

settings Shortcut

2. Select a key.

→

1. In Idle mode, press <Menu

and select Settings

Security Change

password

2. Enter the default password,

→

3. Select a menu to be assigned to

the key.

00000000, and press <OK>.

3. Enter a new 4- to 8-digit

You can switch the phone to Quiet

mode to avoid disturbing other

people.

Quiet mode

password and press <OK>.

4. Enter the new password again

and press <OK>.

Press and hold [ ] in Idle mode.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

OK>.

Make/Answer calls

Step outside the phone

Begin with your camera, the music player, the web, and

other special features

1. In Idle mode, enter an area

Make a call

code and phone number.

Use the camera

2. Press [ ].

3. To end the call, press [ ].

1. Open the phone.

Take a photo

1. When the phone is ringing,

press [ ].

2. In Idle mode, press and hold

Answer a call

[

]

to turn on the camera.

2. To end the call, press [ ].

3. Aim the lens at the subject and

make any desired adjustments.

Press [

4. Press [

] or [ ] to take a

Adjust the

volume during

a call

photo. The photo is saved

automatically.

5. Press <Preview> to take

another photo.

1. In Idle mode, press <Menu

View a photo

and select My files

My photos

2. Select the photo you want.

→

Images

→

Play music

1. In Idle mode, press and hold

to turn on the camera.

Record a video

[

]

Use these methods:

Copy music

files to the

phone

2. Press [

] to switch to Record

] or [ to start

], < >, or [ ] to

•

Download from the wireless

web p. 43

mode.

ꢀ

3. Press [

]

•

Download from a computer

using the optional Samsung PC

recording.

4. Press [

Studio

User’s Guide

ꢀSamsung PC Studio

stop recording. The video is

saved automatically.

•

Receive via Bluetoothꢀp. 84

5. Press <Preview> to record

another video.

1. In Idle mode, press <Menu

and select Applications

Music player

2. Press <Options> and select

Add music Add all or Add

files

Create a play

list

→

1. In Idle mode, press <Menu

and select My files Videos

My video clips

2. Select the video you want.

Play a video

→

Step outside the phone

Browse the web

Using a built-in web browser, you can easily access the

wireless web to get a variety of up-to-date services

and information, and to download web content.

3. For Add files, press [

] to

Create a play

list

(continued)

select the files you want and

press <Select>.

4. Press <Back> to return to the

music player screen.

In Idle mode, press [

Launch the

web browser

1. From the music player screen,

Play music files

press [

2. During playback, use the

following keys:

•

To scroll through browser items,

press [Up] or [Down].

Navigate the

web

•

: pauses or resumes

playback.

•

To select an item, press [

To return to the previous page,

press <Back>.

•

Left: returns to the previous

file.

•

To move to the next page, press

•

Right: skips to the next file.

Up: opens the play list.

Options> and select Go

Forward

To access options, press

Options>.

→

: adjusts the volume.

Down: stops playback.

Use Phonebook

1. In Idle mode, press

Contacts>.

Find an entry

To the phone’s memory:

Add an entry

2. Enter the first few letters of the

name you want.

1. In Idle mode, enter a phone

number and press <Options>.

3. Select an entry.

2. Select Save contact

a number type.

→

Phone

4. Scroll to a number and press

→

[

]

to dial, or press [

] to

3. Specify contact information:

First name, Last name, Mobile,

Home, Office, Fax, Other, Email,

Caller ID, Ringtone, Group, and

Note.

edit contact information.

1. In Idle mode, press <Menu

and select Phonebook My

namecard

Create and

send a name

card

→

4. Press <Save> to save the entry.

2. Specify your contact

information.

To the SIM card:

1. In Idle mode, enter a phone

3. Press <Save> to save the

number and press <Options>.

name card.

2. Select Save contact

→

SIM.

4. To send the name card, press

3. Enter a name.

<Options> and select Send

via a sending method.

→

4. Press <Save> to save the entry.

Step outside the phone

Send messages

4. Select Image and video or

Sound

1. In Idle mode, press <Menu

Send a text

message (SMS)

5. For Image and video, select

Add image or Add video and

add an image or video clip.

and select Messages

message

2. Enter the message text.

3. Press <Options> and select

→

Create

Text message.

→

For Sound, select Add sound

and add a sound clip.

Save and send or Send only

6. Select Message

7. Enter the message text and

press [ ].

8. Press <Options> and select

Send

4. Enter destination numbers.

5. Press [

message.

] to send the

1. In Idle mode, press <Menu

and select Messages Create

Multimedia

Send a

9. Enter destination numbers or

addresses.

→

multimedia

message

(MMS)

message

→

10.Press [

message.

] to send the

2. Select Subject

3. Enter the message subject and

press [ ].

View messages

1. In Idle mode, press <Menu

Send an e-mail

and select Messages

message Email

2. Select Subject

3. Enter the e-mail subject and

press [ ].

4. Select Message

5. Enter the e-mail text and press

6. Select File attached

→

Create

When a notification appears:

View a text

message

→

1. Press <View>.

2. Select the message from the

Inbox.

From the Inbox:

1. In Idle mode, press <Menu

and select Messages My

messages Inbox

→

[

→

2. Select an SMS message ( ).

7. Add image, video, sound, music

files, or document files.

When a notification appears:

1. Press <View>.

View a

multimedia

message

8. Press <Options> and select

Send

9. Enter e-mail addresses.

10.Press [ ] to send the e-mail.

2. Press <Options> and select

Retrieve

3. Select the message from the

Inbox.

Step outside the phone

Use Bluetooth

From the Inbox:

View a

Your phone is equipped with Bluetooth technology,

enabling you to connect the phone wirelessly to other

Bluetooth devices and exchange data with them, talk

hands-free, or control the phone remotely.

multimedia

message

(continued)

1. In Idle mode, press <Menu

and select Messages

messages Inbox

→

2. Select an MMS message (

In Idle mode, press <Menu> and

Turn on

Bluetooth

select Settings

→

Bluetooth

→

1. In Idle mode, press <Menu

View an e-mail

Activation On

→

and select Messages

messages Email inbox

2. Select an account.

→

1. In Idle mode, press <Menu

and select Settings

Bluetooth My devices

Search for and

pair with a

Bluetooth

device

→

3. Press <Yes> to download new

→

e-mails or headers.

Search for new devices

4. Select an e-mail or a header.

2. Select a device.

5. If you selected a header, press

3. Enter a Bluetooth PIN or the

other device’s Bluetooth PIN, if

it has one, and press <OK>.

<Options> and select

Retrieve to view the body of

the e-mail.

When the owner of the other

device enters the same code,

pairing is complete.

1. Access an application,

Phonebook My files, or

Calendar

Send data

2. Scroll to an item.

3. Press <Options> and select

Send via

→

Bluetooth.

4. Select a device.

5. If necessary, enter the

Bluetooth PIN and press <OK>.

To receive data via Bluetooth, your

phone’s Bluetooth feature must be

active.

Receive data

If necessary, press <Yes> to

confirm that you are willing to

receive.

Using AB mode

Press the appropriate key until the character you want

appears on the display.

Enter text

AB, T9, Number, and Symbol modes

You can enter text in some features, such as

Messages, Phonebook, or Calendar, using AB mode, T9

mode, Number mode, and Symbol mode.

Characters in order displayed

Key

Upper case

Lower case

Changing the text input mode

•

Press and hold [ ] to switch between T9 mode

) and AB mode ( ). Depending on your

(

country, you may also be able to access an input

mode for your specific language.

•

Press [ ] to change case or switch to Number

mode (

Press and hold [ ] to switch to Symbol mode.

2. Enter the whole word before editing or deleting

characters.

Other AB mode operations

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

3. When the word displays correctly, go to step 4.

Otherwise, press [

choices for the keys that you have pressed.

For example, Of and Me use [ ] and [ ].

0] to display alternative word

•

Press [ ] to insert a space.

Press the Navigation keys to move the cursor.

4. Press [ ] to insert a space and enter the next

word.

Press [C] to delete characters one by one. Press

and hold [C] to clear the display.

Other T9 mode operations

•

Press [1] to enter periods or apostrophes

automatically.

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

•

Press [ ] to insert a space.

Press the Navigation keys to move the cursor.

Entering a word in T9 mode

Press [

] to delete characters one by one. Press

and hold [

C] to clear the display.

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter Hello in T9 mode.

2] to [9] to start entering a word. Press

Adding a new word to the T9 dictionary

This feature may not be available for some languages.

1. Enter the word that you want to add.

5], [5], and [6] to

T9 predicts the word that you are typing, and it

may change with each key that you press.

2. Press [0] to display alternative words for your key

Call functions

Advanced calling features

presses. When there are no more alternative

words, Add appears on the bottom line.

3. Press <Add>.

Making a call

1. In Idle mode, enter the area code and phone

number.

4. Enter the word you want using AB mode and press

<OK>.

Using Number mode

2. Press [ ].

Number mode enables you to enter numbers.

• Press [

C] to clear the last digit or press and hold

] to clear the whole display.

Press the keys corresponding to the digits you want.

• Press and hold [ ] to enter a pause between

numbers.

Using Symbol mode

Symbol mode enables you to insert symbols.

Making an international call

1. In Idle mode, press and hold [

appears.

]. The

character

Press

display more symbols

select a symbol

[Up] or [Down].

2. Enter the country code, area code, and phone

number, then press [ ].

the corresponding

number key.

Redialling recent numbers

clear the entered symbols

insert the symbols

[

1. In Idle mode, press [ ] to display the list of

recent numbers.

OK>.

2. Scroll to the number you want and press [ ].

Answering a call

Making a call from Phonebook

When you receive an incoming call, the phone rings

and displays the incoming call image.

Once you have stored a number in Phonebook, you

can dial the number by selecting it from Phonebook.

Press <Accept> or [ ] to answer the call.

ꢀp. 30

Tips for answering a call

You can also use the speed dial feature to assign your

most frequently called numbers to specific number

•

When Anykey answer is active, you can press

any key, except for <Reject> and [ ].

ꢀp. 76

keys.ꢀp. 32

•

Press <Reject> or [ ] to reject a call.

You can quickly dial a number from the SIM card using

its location number assigned when stored.

Press and hold [

ringer, depending on the Volume key

setting. p. 76

] to reject a call or mute the

1. In Idle mode, enter a location number and press

ꢀ

[

2. Press [Left] or [Right] to scroll through other

numbers.

Viewing missed calls

If you have missed calls, the screen displays how

many calls you have missed.

3. Press <Dial> or [ ] to dial the number you want.

1. Press <View>.

Ending a call

Close the phone or press [ ].

2. If necessary, scroll through the missed calls.

3. Press [ ] to dial the number you want.

Call functions

Placing a call on hold/Retrieving

Press <Hold> or <Retrieve> to place a call on hold

or retrieve the call.

Using the headset

Use the headset to make or answer calls without

holding the phone.

Connect the headset to the jack on the left side of the

phone. The button on the headset works as follows:

Making a second call

You can make another call if your network supports

this function.

Press

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

redial the last call

answer a call

end a call

and hold the button twice.

the button.

4. Press <Options> and select End held call to end

the call on hold.

5. To end the current call, press [ ].

Options during a call

You can access a number of functions during a call.

Answering a second call

You can answer an incoming call while already on the

phone, if your network supports this function and you

Adjusting the volume during a call

Use [

] to adjust the earpiece volume during a call.

have activated the call waiting feature.

ꢀp. 80

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

1. Press [ ] to answer the call. The first call is

automatically put on hold.

2. Press <Swap> to switch between the calls.

3. Press <Options> and select End held call to end

•

Menu: access the phone's menu functions.

Voice on Voice off: switch off the phone's

the call on hold.

4. To end the current call, press [ ].

microphone so that the other person on the phone

cannot hear you, or switch it back on.

Using the speakerphone feature

Use the speakerphone feature to talk and listen with

the phone a short distance away.

•

Mute keys/Send keys: switch the key tones on

or off.

To communicate with answering machines or

computerised telephone systems, Send keys

must be selected.

Press [

] and then <Yes> to activate the

speakerphone feature. Press the key again to switch

back to the earpiece.

•

Send DTMF: send the DTMF (Dual tone multi-

frequency) tones as a group. The DTMF tones are

the tones used in phones for tone dialling,

sounding when you press the number keys. This

option is helpful for entering a password or an

account number when you call an automated

system, like a banking service.

Using In-call options

Press <Options> to access the following options

during a call:

•

Speaker on

feature or switch back to Normal mode.

Switch to headset Switch to phone: switch the

call to a Bluetooth headset or hands-free car kit or

back to the phone. To use this feature, you first

need to connect your headset to the phone.

/Normal: turn on the Speakerphone

•

Phonebook: access the contact list.

End held call: disconnect the call currently on

hold.

ꢀp. 83

•

Transfer: transfer the currently active call to a

caller on hold. The two callers can talk to each

other, but you are disconnected from the call.

Menu functions

All menu options listed

Join: set up a multi-party call by adding a caller

on hold to a currently active call. You can include

up to 5 people on a multi-party call.

Call log (Menu 1)

Select one: select one of multi-party call

participants. You can then use the following

options:

Use this menu to view the calls you have dialled,

received, or missed, and the length of calls. You can

also check the cost of your calls, if your SIM card

supports this function.

Private: have a private conversation with one

multi-party call participant. The other participants

can converse with each other. After the private

conversation, select Join to return both all private

participants to the multi-party call.

To access this menu, press <Menu> in Idle mode and

select Call log

Recent contacts (Menu 1.1)

Remove: disconnect one multi-party call

participant.

This menu displays the most recent calls dialled,

received, or missed.

Accessing a call record

1. Press [Left] or [Right] to move to another call

type.

2. Press [Up] or [Down] to scroll through the call list.

3. Press [

] to view the details of a call, or [ ] to

dial a number.

Using call record options

Delete all (Menu 1.5)

While viewing call details, press <Options> to access

the following options:

Use this menu to delete all of the records in each call

type.

•

Call: edit the number and dial it.

1. Press [

] to select the call types to be cleared.

Add to Phonebook: save the number to

Phonebook.

2. Press <Delete>.

3. Press <Yes> to confirm the deletion.

•

Send: send an SMS or MMS message to the

selected number.

Call time (Menu 1.6)

Delete: delete the selected call record or all

records.

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

Missed calls (Menu 1.2)

•

Last call time: check the length of your last call.

This menu displays the most recent calls you did not

answer.

Total dialled calls: check the total length of all

the calls you have dialled.

•

Total received calls: check the total length of all

the calls you have received.

Dialled calls (Menu 1.3)

This menu displays the most recent calls you have

dialled.

To reset the call timers, press <Reset>. You need to

enter the phone password.

Received calls (Menu 1.4)

The password is preset to 00000000. You can

change this password.ꢀp. 85

This menu displays the most recent calls you have

received.

Menu functions

Call costs (Menu 1.7)

Phonebook (Menu 2)

This network feature displays the cost of calls. This

menu is available only if supported by your SIM card.

Note that this is not intended to be used for billing

purposes.

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Phonebook.

•

Last call cost: check the cost of your last call.

To access this menu, press <Menu> in Idle mode and

Total cost: check the total cost of all of your calls.

If the total cost exceeds the maximum cost set in

Set max. cost, you must reset the counter before

you can make another call.

select Phonebook

Contact list (Menu 2.1)

Use this menu to search for numbers in Phonebook.

•

Max. cost: check the maximum cost limit set in

Finding an entry

1. Enter the first few letters of the name that you

want to find.

Set max. cost

•

Reset counters: reset the cost counters.

Set max. cost: set the maximum cost authorised

for your calls.

2. Select the name from the list.

3. Scroll to a number and press [ ] to dial or press

•

Price/Unit: set the price per unit that is applied

when the cost of your calls is calculated.

[

] to edit contact information.

Using Phonebook options

While viewing contact details, press <Options> to

access the following options:

•

Edit: edit contact information.

•

Send message: send an SMS or MMS message to

the selected number, or an e-mail to the selected

address.

•

Caller ID: assign an image to alert you to a

call from the person.

Ringtone: assign a ringtone to alert you to a

call from the person.

Group: assign the contact to a caller group.

Note: add a memo about the person.

•

Copy to: copy the contact to the phone’s memory

or to the SIM card.

•

Send via: send the contact via SMS, MMS, e-mail,

or Bluetooth.

3. Press <Save> to save the contact.

Delete: delete the selected contact.

Storing a number on the SIM card

1. Select SIM

Create contact (Menu 2.2)

2. Enter information about the contact.

Use this menu to add a new contact to Phonebook.

•

Name: assign a name.

Phone number: add a number.

Location: assign a location number.

Storing a number in the phone’s memory

1. Select Phone

2. Change the settings or enter information about the

contact.

To assign a caller ID image, ringtone, or group,

the contact must be saved to the phone’s

memory.

•

First name

Mobile Home

number in any type.

Email: assign an e-mail address.

Last name: assign a name.

Office Fax Other: add a

3. Press <Save> to save the contact.

•

Menu functions

•

Edit: change the group properties.

Group (Menu 2.3)

Send message: send an SMS, MMS, or e-mail

message to the group members you want.

Use this menu to organise your contacts in caller

groups.

•

Delete: delete the selected group or all groups.

Group members, however, will not be deleted from

Phonebook.

Creating a new caller group

1. Press <Options> and select Create group

2. Enter a name for the group.

Speed dial (Menu 2.4)

3. Select the caller ID line and set an image.

4. Select the ringtone line and set a melody.

5. Press <Save> to save the group.

Use this menu to assign a speed dial number (2 to 9)

for 8 of your most frequently called numbers.

Assigning speed dial numbers

Adding members to a caller group

1. Select a group.

1. Select a key location from

for your voicemail server.

. Key

is reserved

2. Press <Add>.

2. Select a contact from the contact list.

3. Press [

] to select the contacts to be added.

3. Select a number, if the contact has more than one

number.

4. Press <Select>.

Managing caller groups

Managing speed dial entries

While viewing the group list, press <Options> to

access the following options:

From the Speed dial screen, press <Options> to

access the following options:

•

View: display the members of the selected group.

•

Add: assign a number to an unassigned key.

Create group: add a new group.

•

View: check the name and number assigned to a

key.

•

Exchange namecard: exchange name cards with

another person via Bluetooth.

•

Change: assign a different number to a key.

Delete: delete the name card.

Remove: clear the speed dial setting for a key.

Own number (Menu 2.6)

Dialling speed dial entries

Use this menu to check your phone numbers, or to

assign a name to each of the numbers. Changes made

here do not affect the actual subscriber numbers on

your SIM card.

In Idle mode, press and hold the appropriate key.

My namecard (Menu 2.5)

Use this menu to create a name card and send it to

other people.

Management (Menu 2.7)

Use this menu to manage Phonebook entries.

Saving your name card

•

Save new contact to: select a default memory

location for saving contacts. If you select Always

ask, the phone will ask you to select a memory

location each time you save a number.

The procedure for creating your name card is the

same as the one for saving a phone number in the

phone’s memory.ꢀp. 31

Using name card options

•

Copy all to: copy all of the contacts stored on the

SIM card to the phone’s memory, or vice versa.

After saving your name card, press <Options> to

access the following options:

Delete all: delete all of the contacts from your

phone’s memory, your SIM card, or both.

•

Edit: edit the name card.

Send via: send the name card via SMS, MMS,

e-mail, or Bluetooth.

Menu functions

•

Memory status: check the number of contacts

you have stored in the phone’s memory and on the

SIM card.

Music player (Menu 3.1)

Use this menu to enjoy music. First, you need to save

music files onto your phone’s memory.

To enjoy high quality music, you can use an optional

Bluetooth stereo headset.

Service number (Menu 2.8)

Use this menu to view the list of Service Dialling

Numbers (SDN) assigned by your service provider,

including emergency numbers and numbers for

directory enquiries. This menu is available if your SIM

card supports SDN.

Normal headsets are not compatible with the music

player.

Downloading or receiving music files

Use these methods to save music files to your phone’s

memory:

1. Scroll to the number you want.

2. Press <Dial> or [ ].

•

Download from the wireless web

ꢀp. 43

Download from a computer using the optional

Samsung PC Studio

Guide

ꢀ

Samsung PC Studio User’s

Applications (Menu 3)

Use this menu to play Java games, play music files, or

edit photos. You can also use convenient features,

such as a voice recorder, alarm clock, calculator,

converter, and stopwatch.

•

Receive via an active Bluetooth connectionꢀp. 84

The downloaded or received files are stored in the

Music folder. p. 63

ꢀ

To access this menu, press <Menu> in Idle mode and

Creating a play list

1. From the music player screen, press <Options

select Applications

and select Add music

2. Select either of the following options:

Key

Function

•

Add all: add all of the files in the phone’s

memory to the play list.

Add files: add specific files to the play list.

Right

Skips to the next file.

Opens the play list.

•

Down

Stops playback.

3. If you select Add files, select the files you want

Adjusts the volume level.

Turns 3D sound on or off.

Changes the playback animation.

Changes the repeat mode.

Changes the equaliser mode.

Changes the skin type.

Turns Shuffle mode on or off.

and press <Select>.

4. Press <Back> to return to the music player

screen.

Playing music files

1. From the music player screen, press <Options

and select Play via

2. Select Phone to use the phone speaker.

Select Bluetooth stereo headset to use a

Bluetooth headset and then search for and connect

to the headset.

Using music player options

From the music player screen, press <Options> to

access the following options:

During playback, use the following keys:

•

Play via: select a sound output mode, Phone or

Bluetooth stereo headset

Play Pause: begin or pause playback.

Key

Function

Pauses or resumes playback.

Returns to the previous file.

•

Left

Menu functions

•

Transfer to Phone

switch the sound output to the phone speaker or a

Bluetooth headset.

Bluetooth stereo headset

MP3 overrides other sounds: set the music

player to continue playback even if you exit it.

Equaliser: select an equaliser setting.

•

Open playlist: access the play list of the current

album or album list. On the album list, you can set

up multiple albums.

3D sound: turn 3D sound on or off.

Visualisation: change the playback animation

and select the length of time the backlight remains

on while playing MP3 files.

•

Go to music: access the Music folder.

Send via: send the current file via e-mail or

Bluetooth.

Skin: select a skin type.

Volume: select a volume level.

Details: access the file properties.

•

Set as: set the file as your call ringtone or as a

ringtone for a Phonebook entry.

•

Key management: manage the license keys you

have acquired.

Activate key: get a license key when the key for

the selected DRM file expires.

Accessing the play list

Remove from playlist: remove the selected file

from the play list.

From the music player screen, press [Up].

Press <Options> to access the following options:

Settings: change the default settings for playing

music files.

•

Play via: select a sound output mode, Phone or

Bluetooth stereo headset and then play the

currently selected file.

Repeat mode: select a repeat mode.

Shuffle: set the music player to play tracks in

random order.

•

Add music: add files to the play list.

•

Go to album list: access the album list.

3. Press <Stop> or [Down] to end recording. The

voice memo is saved automatically.

Move to: move the selected file to another album.

Copy to: copy the selected file to another album.

4. Press [

] to review the voice memo, or [Up] to

record a new memo.

Move track in playlist: move the selected file to

the position you want within the play list.

Playing a voice memo

•

Activate key: get a new license key when the key

for the selected DRM file expires.

1. From the Voice recorder screen, press <Options>

and select Go to My voice clips.

Remove: remove the selected file or all files from

the play list.

2. Select a voice memo.

During playback, use the following keys:

•

Details: access the file properties.

Key

Function

Key management: manage the license keys you

Pauses or resumes playback.

Moves backward in a memo.

Moves forward in a memo.

Adjusts the volume.

Stops playback.

have acquired.

Left

Right

Voice recorder (Menu 3.2)

Use this menu to record voice memos. A voice memo

can be up to one hour long.

Recording a voice memo

Down

1. Press [

2. Speak into the microphone.

Press [ ] to pause or resume recording.

] to start recording.

Menu functions

4. Press <Done>.

Changing the recording mode

5. Press <Options> and select Save as

You can change the recording mode of the voice

recorder. The maximum recording time is determined

by this setting. Before recording a memo, press

6. Enter a new file name and press <OK>.

Transforming

1. Select a photo or take a new photo.

<Options> and select Settings

→

a recording mode:

•

Limit for multimedia message: record a voice

memo for adding to an MMS message.

2. Press <Options> and select Transform

→

option:

•

Limit for email: record a voice memo for adding

to an e-mail.

•

Resize: change the photo size.

Rotate: rotate the photo 90 degrees.

Flip: flip the photo.

Maximum 1 hour: record a voice memo of up to

one hour.

3. Press <Done>.

Image editor (Menu 3.3)

4. Press <Options> and select Save as

Use this menu to edit your photos using various

editing tools.

5. Enter a new file name and press <OK>.

Cropping

1. Select a photo or take a new photo.

Applying an effect

1. Press <Options> and select New image

or Take photo

→

Open

2. Press <Options> and select Crop

3. Move the cropping frame to the area of the image

you want.

2. Select a photo or take a new photo.

3. Press <Options> and select Effects

→

an effect

Press <Options> and select Resize to change the

frame size.

option.

4. Press <Options> and select Done

1. Select a photo or take a new photo.

5. Press <Options> and select Save as

2. Press <Options> and select Merge stamp. The

background photo appears in the image box next

6. Enter a new file name and press <OK>.

Adding visual features

3. Press <Options> and select Add image

You can decorate photos by adding a frame, an image,

or a note.

4. Add a photo by selecting or taking a photo. The

added photo appears in the image box next to

. This will be the stamp.

1. Select a photo or take a new photo.

2. Press <Options> and select Insert

→

a feature

5. Press <Options> and select Merge. The stamp

photo is added to the background photo as an

outline.

type.

3. Select an item or enter text to be inserted.

4. Adjust the position of the inserted item and press

6. Press <Options> to access the following stamp

<Done>.

edit options:

5. Press <Options> and select Save as

•

Resize: change the stamp size.

Move: change the position of the stamp.

Rotate: rotate the stamp.

Stamp colour: change the stamp colour.

Shadow on: apply a shadow to the stamp.

6. Enter a new file name and press <OK>.

Merging a stamp effect

This editing tool allows you to make an outline stamp

of a photo and then merge it with another photo. You

can use this tool to create your own photo postcard by

taking a photo of a handwritten message and merging

it with a photo.

7. When you have finished, press <Options> and

select Done

8. Press <Options> and select Save as

Menu functions

9. Enter a new file name and press <OK>.

•

Permissions: set permission settings for services

charging you additional costs, such as network

access and SMS.

Java world (Menu 3.4)

•

Upgrade: upgrade the application to the latest

version.

Use this menu to access the embedded Java games

and downloaded Java applications.

Send information via text message: send the

URL containing the application via SMS.

Accessing an embedded game

1. Select My games

→

a game.

Memory status: access memory information for

applications.

2. Press [ ].

Using Java application options

Settings: select a connection profile to be used for

applications requiring network access. You can also

From the application list, press <Options> to access

create or edit a profile.ꢀp. 85

the following options:

•

Start: launch the selected application.

World time (Menu 3.5)

Move to: move the application to another folder.

Use this menu to set your local time zone and find out

what time it is in another part of the world.

Delete: delete the selected application or all

applications, except for the embedded games.

Viewing world time

•

Lock/Unlock: lock the application to protect it

from being deleted, or unlock the application.

1. From the world map, press [Left] or [Right] to

scroll to the city you want. As the time line moves,

the time and date of the given zone display.

Details: access the application properties.

2. Press [

zone.

] to save the city as your local time

Applying daylight saving time

Stopping an alarm

1. From the world map, press <Options> and select

•

For a non-wake-up alarm, press any key.

For a wake-up alarm, press <Confirm> or [

Press any key, except <Confirm> and [

Apply daylight saving time

], to

2. Press [ ] to select the time zones you want.

3. Press <Save>.

cause it to sound again after 5 minutes. You can do

this a maximum of 5 times.

Alarm (Menu 3.6)

Setting the alarm to sound even if the phone

is off

Use this menu to set alarms. The alert type for a

normal alarm corresponds to the call alert type

settings. A wake-up alarm is not affected by your

sound settings.

From the Alarm screen, select Auto power

→

On.

If the phone is off when it is time for the alarm to

sound, the phone switches on and sounds the alarm.

Setting an alarm

1. Select the type of alarm.

Deactivating an alarm

1. Select the alarm you want to deactivate.

2. Select Off on the Alarm line.

3. Press <Save>.

2. Set each alarm option:

•

Alarm: activate the alarm.

Alarm time: enter the time for the alarm to

ring.

Calculator (Menu 3.7)

•

AM/PM: set AM or PM in 12-hour format.

Repeat: select a repeat option.

Alarm tone: select an alarm tone.

Use this menu to perform basic arithmetic functions,

such as addition, subtraction, multiplication, and

division.

3. Press <Save>.

Menu functions

1. Enter the first number.

4. Press [Left] or [Right] to select the unit to which

you want to convert.

•

Press <.()> to insert a decimal point or

bracket.

Press

The equivalent value for the amount you entered

displays.

•

[

] or [

]

to move the cursor.

2. Press one of the Navigation keys to access the

math function you want.

For the currency converter, you can view and set

currency rates by pressing <View rate>.

3. Enter the second number.

Timer (Menu 3.9)

4. Press [

] to view the result.

Use this menu to set a period of time for the phone to

count down. The phone will sound an alarm when the

specified period of time has expired.

5. If necessary, repeat from step 2 to continue the

calculation.

Converter (Menu 3.8)

Starting the timer

Use this menu for common conversions, such as

currency and temperature.

1. Press <Set>.

2. Enter the length of time you want to count down

1. Select a converter.

and press <OK>.

2. Press [Left] or [Right] to select the original unit

and press [Down].

3. Press [

] to start counting down.

Stopping the timer

3. Enter the value to be converted and press [Down].

•

Press any key when the timer rings.

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature to above

zero (+) or below zero (-).

Press [

before it rings.

] on the Timer screen to stop the timer

Stopwatch (Menu 3.10)

SIM AT (Menu 3.12)

Use this menu to measure elapsed time. The

maximum time is 10 hours.

This menu is available if you use a SIM AT card that

supports SIM Application Toolkit menus and provides

additional services, such as news, weather, sports,

entertainment, and location services. Available

services may vary, depending on your service

provider’s plans. For details, see your SIM card

instructions or contact your service provider.

1. Press [

] to start the stopwatch.

2. Press [

] to check an interval. You can repeat

this step for a total of 4 intervals.

Key management (Menu 3.11)

Use this menu to manage the license keys you have

acquired to activate media contents locked by DRM

systems.

Browser (Menu 4)

The Wireless Application Protocol (WAP) browser on

your phone allows you to access the wireless web.

From the wireless web, you can access up-to-date

information and a wide variety of media content, such

as games, wallpapers, ringtones, and music files.

Press <Options> to access the following options:

•

View: open the corresponding media content.

Delete: delete the selected licence key.

Go to My Messages: access the message

To access this menu, press <Menu> in Idle mode and

containing the media content.

select Browser

•

Go to My Items: access the corresponding file

folder.

Details: access the properties of the licence key.

Menu functions

Using page options

Home (Menu 4.1)

From any web page, press <Options> to access the

following options:

Use this menu to connect your phone to the network

and load the homepage of the wireless web service

provider. You can also press [

] in Idle mode.

•

Go to: access the linked web page.

Go to homepage: return to the homepage.

Enter URL: enter a URL address manually.

Navigating the web browser

Press

[Up] or [Down].

Go: move backward or forward through pages in

history.

scroll through browser

items

•

Reload: reload the current page with updated

information.

select a browser item

[

], or <Options>

and select Go to

Bookmarks: bookmark the current page or access

the bookmark list.

return to the previous

page

Back>, or <Options

Send URL: send the URL of the current page via

SMS or e-mail.

and select Go Back

→

move to the next page

<Options> and select Go

To DesktopView/To SmartFitView: change the

display mode of the browser.

→

Forward

•

Save: save the selected image or page.

Page details: access the page properties.

Browser options: change the various settings for

the browser.

Cache: change the cache mode or clear the cache.

A cache is a temporary memory that stores

recently accessed web pages.

Bookmarks (Menu 4.3)

Use this menu to save URL addresses in order to

quickly access web pages.

Cookies: change the cookie acceptance mode or

delete cookies. Cookies are pieces of personal

information sent to a web server while navigating

the web.

Adding a bookmark

1. Press <Add>. If a bookmark has already been

saved, press <Options> and select Add

bookmark

Preferences: change the browser display and

sound settings.

2. Enter a title for the bookmark and press [Down].

3. Enter a URL address and press <Save>.

Certificates: access certificate information.

About browser: access version and copyright

information about the browser.

Accessing a bookmarked page

Selecting a bookmark item launches the web browser

and accesses the associated web page.

Exiting the browser

Press [ ] to end the network connection and exit the

browser.

Using bookmark options

On the Boomarks screen, press <Options> to access

the following options:

Enter URL (Menu 4.2)

•

Go to: access the bookmarked web page.

Go to homepage: access the homepage.

Enter URL: enter a URL address manually.

Use this menu to manually enter a URL address and

access the associated web page.

You can add the entered URL to the Bookmark list by

selecting Add bookmark

Menu functions

•

Edit bookmark: edit the URL address and title of

the bookmark.

Clear cache (Menu 4.6)

Use this menu to clear information stored in the cache.

•

Add bookmark: add a new bookmark.

Browser settings (Menu 4.7)

Send URL: send the URL address of the bookmark

via SMS or e-mail.

Use this menu to select a connection profile to be used

for accessing the wireless web. You can also create or

•

Delete: delete the selected bookmark or all

bookmarks.

edit a profile.ꢀp. 85

Saved pages (Menu 4.4)

Messages (Menu 5)

You can access the list of pages you have saved while

online.

Use the Messages menu to send and receive text

messages, multimedia messages, and e-mails. You

can also use push message and cell broadcast

message features.

If you select a link on the page, the phone switches to

online to access the linked page.

History (Menu 4.5)

To access this menu, press <Menu> in Idle mode and

select Messages

You can access the list of pages you have accessed

recently.

Select a URL from the list to access the corresponding

web page.

•

Attach: attach a Phonebook entry as a name

card or calendar data as a data format

attachment.

Save in: save the message in another box.

Input language: change the language to be

used in T9 input mode.

Create message (Menu 5.1)

Use this menu to create and send messages.

Text message (Menu 5.1.1)

•

Short Message Service (SMS) allows you to send or

receive text messages that may include simple

pictures, animated images, and melodies.

•

Text style: change the text attributes.

Input method: change the text input mode.

1. Enter your message.

3. When you have finished, press <Options> and

select Save and send or Send only

The maximum number of characters allowed in a

message varies by service provider. If your

message exceeds the maximum number of

characters, the phone will split the message.

4. Enter a destination number.

To send the message to more than one recipient,

fill in additional destination fields.

2. Press <Options> to access the following options

for creating a message:

5. Press [

] to send the message.

•

Save and send: save the message in Outbox

and then send it.

Multimedia message (Menu 5.1.2)

Multimedia Message Service (MMS) delivers messages

containing a combination of text, image, video, and

audio, from phone to phone or from phone to e-mail.

•

Send only: just send the message.

Insert: add a template, Phonebook entry, or

bookmark to text.

1. Select the Subject line.

•

Add image/Add animation/Add melody:

2. Enter the message subject and press [

attach a simple image, animated image, or

melody.

Menu functions

3. Select the Image and video or Sound line and

•

Delete page: delete an added page.

Edit page: change the duration of page display

or move the page forward among the other

pages.

Attach: attach a Phonebook entry as a name

card or calendar data as a data format

attachment, or a document file stored in the

Other files folder.

add an image, a video, or a sound file.

• The maximum size allowed for a message can

differ, depending on your service provider.

• Depending on the file type or DRM (Digital

Rights Management) system, some files may

not be able to be forwarded.

•

4. Select the Message line.

•

Remove subject

Remove media Remove sound

remove an added item.

7. When you have finished, press <Options> and

select Send

Remove message

5. Enter the message text and press [

/Remove:

6. Press <Options> to access the following options:

•

Edit: edit the subject or text of your message.

Change image Change video Change

sound: replace an added item.

8. Enter a phone number or e-mail address.

•

Preview: view the message as it will be shown

on the recipient’s phone.

To send the message to more than one recipient,

fill in additional destination fields.

•

View: open the selected attachment.

Send: send the message.

Save in: save the message in another box.

Add page: add pages. Move to each page by

pressing [Left] or [Right].

9. Press [

] to send the message.

•

Save in: save the e-mail in another box.

Attach: attach name cards or calendar data as

data format attachments.

Email (Menu 5.1.3)

You can create and send e-mails that include text,

audio, and images. To use this feature, you need to

subscribe to an e-mail service and set up your e-mail

6. Press <Options> to access the following options:

account and profile.

ꢀp. 58

•

Edit: edit the subject or text.

Add image Add video Add sound

music Add other files: add media files or

document files stored in the phone’s memory.

View: open the selected attachment.

Send: send the e-mail.

Save in: save the e-mail in another box.

Attach: attach name cards or calendar data as

data format attachments.

1. Select the Subject line.

/Add

2. Enter the subject of your e-mail and press [

3. Select the Message line.

•

4. Enter the e-mail text and press [

5. Select the File attached line and select one of the

following options:

•

Add image/Add video/Add sound/Add

music: add media files stored in the phone’s

•

Remove subject/Remove message: clear

memory.

the subject or text.

Remove attachment: delete the selected

attachment.

Remove all attachments: delete all

attachments.

Depending on the file type or DRM (Digital

Rights Management) system, some files may

not be able to be forwarded.

•

Add other files: add document files stored in

the Other files folder.

Send: send the e-mail.

7. When you have finished, press <Options> and

select Send

Menu functions

8. Enter an e-mail address.

•

Push message from web servers.

To send the e-mail to more than one recipient, fill

in additional destination fields.

Configuration message, containing network

parameters from your service provider.

9. Press [

] to send the e-mail.

•

CB (Cell broadcast) message from your

service provider.

My messages (Menu 5.2)

Delivery report for your sent messages

Use this menu to access messages you have received,

sent, or which have failed in sending.

• Depending on the DRM (Digital Rights

Management) system, messages having web

content may not be able to be forwarded.

Inbox (Menu 5.2.1)

• A

icon next to a message means that the

This folder stores all of the messages you have

received, except for e-mails.

message is of high priority. A grey-coloured

message icon indicates low priority.

Viewing a message

Using message options

The following icons may appear on the message list to

show the message type:

While viewing a message, press <Options> to access

the following options:

•

SMS

MMS

SMS messages

•

Reply via: reply to the sender via SMS or MMS.

Forward: forward the message to other people.

Delete: delete the message.

MMS notification ( : Being retrieved,

: Failed to retrieve)

•

Voicemail

•

Move to phone

message between the SIM card and the phone’s

memory.

Move to SIM: move the

•

Delete: delete the message.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Attached items: save media content from the

message to your phone’s memory.

Attached items: save media content from the

message to your phone’s memory.

Protection: protect the message from being

deleted.

Protection: protect the message from being

deleted. You can protect only those messages

stored in the phone’s memory.

Details: access the message properties.

Configuration messages

•

Install: apply the configuration specified in the

message to your phone.

•

Add to block list: add the sender’s number to the

Block list to reject the messages from the sender.

•

Delete: delete the message.

MMS messages

/MMS notifications

Protection: protect the message from being

deleted.

•

Retrieve: retrieve the MMS message from the

MMS server.

Push messages

Reply via text message: reply to the sender via

SMS.

•

Go to URL: connect to the URL specified in the

message.

Reply via multimedia message to: reply to the

sender via MMS.

•

Delete: delete the message.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Forward: forward the message to other people.

Menu functions

•

Protection: protect the message from being

deleted.

Outbox (Menu 5.2.3)

This folder stores messages that the phone is

attempting to send or has failed to send.

CB messages

•

Save: save the message to the phone’s memory.

The following icons are available to show the message

status:

Delete: delete the message.

•

Being sent

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Failed to send

Delivery reports

While viewing a message, press <Options> to access

the following options:

•

Delete: delete the report.

•

Send again: retry sending the message.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the report.

Forward: forward the message to other people.

•

Protection: protect the report from being deleted.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Drafts (Menu 5.2.2)

•

Delete: delete the message.

This folder stores messages you have saved to send at

a later time.

Protection: protect the message from being

deleted.

When you select a message, it opens in Edit mode so

that you can edit and send the message.

•

Details: access the message properties.

The following icons may appear on the list to show

the e-mail status:

Sent box (Menu 5.2.4)

This folder stores messages that you have sent.

•

Retrieved from the server

Being retrieved

Failed to retrieve

While viewing a message, press <Options> to access

the following options:

•

Forward: forward the message to other people.

icon next to a message means that the

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

message is of high priority. A grey-coloured

message icon indicates low priority.

•

Delete: delete the message.

3. Select an e-mail or a header.

Protection: protect the message from being

deleted.

4. Press [ ] or [ ] to view other pages in the

e-mail.

•

Details: access the message properties.

5. Press [Left] or [Right] to view the previous or next

e-mail.

Email inbox (Menu 5.2.5)

This folder stores e-mails that you have received.

Viewing an e-mail

Using e-mail options

While viewing the e-mail or header, press <Options

1. Select an e-mail account.

to access the following options:

2. Press <Yes> when Check new mail displays, or

•

Retrieve: retrieve the body of the e-mail from the

e-mail server.

press <Options> and select Check new mail

The phone checks the e-mail server and downloads

new e-mails.

•

Reply to: send a reply to the sender or to the

sender and all other recipients.

Menu functions

•

Forward: forward the e-mail to other people.

On the folder list, press <Options> to access the

following options:

•

Delete: delete the e-mail.

•

Open: open the selected folder.

Add to block list: add the sender’s e-mail

address or subject to the Block list to reject

e-mails from that address or containing that

subject.

Create folder: add a new folder.

Rename folder: change the folder name.

Delete: delete the selected folder.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the e-mail.

Templates (Menu 5.3)

Attached items: save the attached files from the

e-mail to your phone’s memory.

Use this menu to make and use templates of

frequently used messages.

•

Protection: protect the e-mail from being deleted.

Text message templates (Menu 5.3.1)

Details: access the e-mail properties.

You can create SMS templates with the sentences you

use frequently so that you can retrieve and insert

them when composing an SMS message.

My folders (Menu 5.2.6)

Use this menu to create new folders and organise your

messages.

Creating a template

Creating a new folder

1. Press <Yes>.

1. Select an empty location.

2. Enter a message and press <OK>.

Using template options

2. Enter a folder name and press <OK>.

Using folder options

From the template list, press <Options> to access

the following options:

•

Edit: edit the selected template.

1. Press [

cleared.

] to select the message folders to be

Send message: create and send a new message.

Delete: delete the selected template.

Add new: add a new template.

Pressing the key twice displays the message types

so that you can specify the ones to be cleared.

2. Press <Delete>.

Multimedia message templates (Menu 5.3.2)

3. Press [

] to select the check box to delete

You can access embedded MMS templates or ones you

have saved so that you can use them in composing an

MMS message.

protected messages, and then press <Yes>.

4. Press <Yes> to confirm the deletion.

Settings (Menu 5.5)

From the template list, press <Options> to access

the following options:

Use this menu to set up various options for using the

messaging service.

•

View: open the selected template.

Edit: edit the template.

Text message (Menu 5.5.1)

Send message: create and send a new message.

You can configure SMS settings.

Delete: delete the selected template or all

templates, except for the embedded ones.

•

Sending options: set up the options for sending

SMS messages:

Send read receipt: send a read-reply request

along with your message.

Delete all (Menu 5.4)

Use this menu to delete messages in each message

folder all at once.

Send delivery receipt: set the network to inform

you when your messages have been delivered.

Menu functions

Bearer selection: select either GSM or GPRS

prefer, depending on your network.

•

Sending options: set up the options for sending

MMS messages:

•

Block list: store the phone numbers from which

you want to reject messages.

Send delivery receipt: set the network to inform

you when your messages have been delivered.

•

Current profile: select an SMS setting profile.

Hide address: set your address to be hidden from

the recipient’s phone.

Profile settings: set the properties of each

profile.

Send read receipt: send a read-reply request

along with your messages.

Service centre: store or change the number of

your SMS server.

Priority: set the priority level of messages.

Default destination: enter the default

destination. It will be displayed on the first field on

the Recipients field.

Expiry date: set the length of time messages are

stored in the MMS server.

Delivery time: set a time delay before messages

Default type: set the default message type. The

network can convert the messages into the

selected format.

are sent.

Outgoing message size: select a maximum size

of attached items allowed for messages.

Validity period: set the length of time your

messages are stored in the SMS server.

•

Receiving options: set up the options for

receiving MMS messages:

Setting name: enter a profile name.

Reject unknown sender: reject messages from

unknown senders.

Multimedia messages (Menu 5.5.2)

Advert allowed: accept advertisements.

You can configure MMS settings.

Information allowed: accept information

messages.

•

Multimedia message profiles: select a

connection profile to be used for MMS. You can also

create or edit a profile.ꢀp. 85

Report allowed: set the network to inform the

sender when a message has been delivered to you.

Emails (Menu 5.5.3)

Home reception: determine if your phone

retrieves new messages automatically when you

are in your home service area.

You can configure default e-mail settings.

You cannot change e-mail profile and account

settings while an e-mail is being sent or retrieved.

Roaming reception: determine if your phone

retrieves new messages automatically when you

are roaming on another network.

•

Sending options: set up the options for sending

e-mails:

Keep a copy: send a copy of your e-mails to your

e-mail account.

Reception within home network or abroad has the

following options:

Send delivery receipt: set the network to inform

you when your e-mails have been delivered.

Automatic: the phone automatically retrieves

messages from the server.

Send read receipt: send a read-reply request

along with e-mails.

Reject: the phone rejects all messages.

Manual: the phone displays notifications. Use

the Retrieve option to manually download new

messages.

Reply-To address: set an e-mail address to

receive read-reply messages from recipients.

Priority: select the priority level of e-mails.

Menu functions

Add signature: attach your name, phone number,

a simple memo, or a tag line to your

e-mails.

Download method: set whether the phone

downloads e-mail headers only or e-mail headers

and bodies both.

Edit name: edit the name in your signature.

Keep in server: leave copies of e-mails on the e-

mail server after retrieving.

Edit telephone number: edit the phone number

in your signature.

•

Block list: specify e-mail addresses or subjects

you want to reject.

Edit note: edit the tag line in your signature.

Email accounts: set up an e-mail account and

select an account to be used.

•

Receiving options: set up the options for

receiving e-mails:

Current account: select an account.

Check interval: determine how often the phone

checks the server for incoming e-mails. If you

select Do not notify, use the Check new email

option to receive new e-mails manually.

Account settings: configure e-mail accounts

using different e-mail servers. Set the options for

each account:

Send read receipt: determine whether or not the

phone sends a read-reply for incoming e-mails. If

you select Announce, the phone asks you to send

a read-reply.

Account name: enter a name for the currently

selected account.

User name: enter a user name.

Email address: enter your e-mail address.

Download limit: determine the maximum size for

incoming e-mails. Your phone will reject

e-mails that exceed the specified size.

SMTP server: enter the IP address or host name

of the outgoing e-mail server.

SMTP port: enter the SMTP port number.

Connect to POP3 server first

IMAP4 server first: connect to the POP3 or

IMAP4 server for authentication before

Connect to

APOP login: connect to the server by using the

APOP login scheme.

Secure connection: use a secure connection for

the e-mail service.

connecting to the SMTP server to send e-mails.

Protocol type: select the protocol for the

incoming e-mail server. The remaining options

depend on the protocol type setting.

When the protocol type is IMAP4

IMAP4 server: enter the IP address or host

name of the server that receives your e-mail.

IMAP4 port: enter the IMAP4 port number.

User ID: enter the IMAP4 user name.

Password: enter the IMAP4 password.

When the protocol type is POP3

POP3 server: enter the IP address or host name

of the server that receives your e-mail.

POP3 port: enter the POP3 port number.

User ID: enter the POP3 user name.

Password: enter the POP3 password.

User SMTP authentication: enable SMTP

authentication, which requires the user to login

before sending e-mails.

User SMTP authentication: enable SMTP

authentication, which requires the user to login

before sending e-mails.

Same as IMAP4: select if you want the SMTP

server to have the same parameters as the

IMAP4 server.

Same as POP3: select if you want the SMTP

server to have the same parameters as the POP3

server.

SMTP user ID: enter the SMTP user name.

SMTP password: enter the SMTP password.

Include attachments: select this option to

receive attachments with e-mails.

SMTP user ID: enter the SMTP user name.

SMTP password: enter the SMTP password.

Menu functions

Email retrieval limit: set the number of

headers you will retrieve from the server.

•

Language: select the preferred languages in

which CB messages display.

Secure connection: use a secured connection

for e-mail service.

SOS messages (Menu 5.6)

You can send SOS messages to your family or friends

in case of an emergency. When the phone is locked,

•

Email profiles: select a connection profile to be

used for e-mail services. You can also create or

press

[

] quickly four or more times in succession to

edit a profile.ꢀp. 85

send the SOS message.

Push messages (Menu 5.5.4)

•

Message sending: Select whether you send a

message or not in an emergency.

You can change the settings for receiving push

messages from the wireless web server.

Recipients: Specify the phone numbers to which

you want to send SOS messages.

•

Receive: set how your phone receives push

messages.

Repeat sending: Select how many times you

send a message repeatedly.

•

Block list: manage blocked server addresses.

Broadcast messages (Menu 5.5.5)

Incoming SOS alert: Select whether you allow a

incoming SOS alert or not.

You can change the settings for receiving CB

messages.

Text: Check the preset SOS message text.

•

Receive: select to receive CB messages, or not.

Memory status (Menu 5.7)

Channel list: indicate the channels from which

you wish to receive CB messages. Please contact

your service provider for further details.

Use this menu to view the amount of memory

currently in use in each folder.

Your service provider supports only count-based or

unlimited-access DRM files.

My files (Menu 6)

The My files menu allows you to access images,

videos, music files, and sound files stored in the

phone’s memory.

Images (Menu 6.1)

This menu displays photos you have taken and images

you have downloaded, received in messages, or

imported from your computer.

To access this menu, press <Menu> in Idle mode and

select My files

Tips for Digital Rights Management

Viewing an image

1. Select an image folder.

2. Select an image.

As a result of the Digital Rights Management (DRM)

system, some of the media items you download from

the Internet or receive by MMS may require a license

key to access them.

Viewing a slide show

You can view your photos as a slide show, a sequential

presentation of each photo in the current folder.

You can acquire the key from the website which owns

the rights to the content; use the Activate key

option.

1. Select My photos

Note the following icons on the list:

2. Press <Options> and select Slide show

•

: Forwardable item with a valid key.

: Forwardable item without a valid key.

: Unforwardable item with a valid key.

: Unforwardable item without a valid key.

3. Select an interval option. The slide show begins.

4. Press <Stop> to stop the slide show.

Using image options

While viewing an image, press <Options> to access

the following options:

Menu functions

•

List: return to the image list.

•

Key management: manage the license keys you

have acquired.

•

Send via: send the file via MMS, e-mail, or

Bluetooth.

Videos (Menu 6.2)

Set as: set the image as wallpaper for the display

or as a caller ID image for a Phonebook entry.

This menu displays video clips you have recorded,

downloaded, received in messages, or imported from

your computer.

Edit: edit the image using the Image editor if it is

a photo taken by the camera on the phone.

ꢀ

p. 38

Video clips recorded on other devices, such as

camcorders, may not play correctly.

•

Activate key: get a license key when the key for

the selected DRM file expires.

Playing a video clip

1. Select a video folder.

2. Select a video clip.

•

Delete: delete the file.

Rename: change the file name.

Move to Favourite images

/Move to My

During playback, use the following keys:

photos Move to Downloaded images: move

the file to another folder.

Key

Function

•

Bluetooth visibility: share the file or all files with

other Bluetooth devices.

Pauses or resumes playback.

Left

Returns to the previous file. Moves

backward in a file when held down.

•

Protection: protect the file from being deleted.

Details: access the file properties.

Right

Skips to the next file. Skips forward in

a file when held down.

•

Bluetooth visibility: share the file or all files with

other Bluetooth devices.

Key

Function

Adjusts the volume.

Stops playback.

•

Protection: protect the file from being deleted.

Down

Details: access the file properties.

Key management: manage the license keys you

have acquired.

Using video options

After playback, press <Options> to access the

following options:

Music (Menu 6.3)

•

List: return to the video list.

This menu displays MP3 files you have downloaded or

imported from your computer.

Send via: send the file via MMS, e-mail, or

Bluetooth.

Select a file. The music player opens.

ꢀp. 35

•

Set as main display: set the video clip, if saved

as a 3GP file, as wallpaper for the display.

When you play a file from this menu, without first

adding it to the play list in the music player,

background play is not supported.

Activate key: get a license key when the key for

the selected DRM file expires.

•

Delete: delete the file.

Rename: change the file name.

Move to Favourite videos

clips Move to Downloaded videos: move the

file to another folder.

/Move to My video

Menu functions

•

Move to Favourite sounds

clips Move to Downloaded sounds: move the

file to another folder.

/Move to My voice

Sounds (Menu 6.4)

This menu displays voice memos you have recorded,

and sound files you have downloaded, received in

messages, or imported from your computer.

Bluetooth visibility: share the file or all files with

other Bluetooth devices.

Playing a sound clip

1. Select a sound folder.

•

Protection: protect the file from being deleted.

Details: access the file properties.

2. Select a sound clip. For a voice memo, see Voice

Key management: manage the license keys you

have acquired.

recorder

ꢀp. 37

Using sound options

Other files (Menu 6.5)

While playing a sound file, press <Options> to access

the following options:

Use this menu to view various document files and files

stored in the phone’s memory without corruption.

Available file formats are DOC, XLS, PPT, PDF, and TXT.

•

List: return to the sound list.

Send via: send the file via MMS, e-mail, or

Bluetooth.

Viewing a file

•

Set as: set the sound as your call ringtone or a

ringtone for a Phonebook entry.

Select a file. Picsel File Viewer runs to open the

document.

Activate key: get a license key when the key for

the selected DRM file expires.

• Depending on the file size or memory capacity of

Picsel File Viewer, a file may not open properly.

• If a document file contains languages

unsupported by Picsel File Viewer, the content of

the document will not display correctly.

•

Delete: delete the file.

Rename: change the file name.

Use the following keys to view the document:

Using document options

While viewing a document, press <Options> to

access the following options:

Key

Function

Up/Down/

Left/Right

Pans around the page.

•

Full screen view/Normal view: change the

display to Full screen view or Normal view.

Zooms in.

•

Zoom: zoom in or out.

Zooms out.

Fit to: fit the document to the page size, screen

width, or screen height.

Fits the document to the page size.

Returns to the first page.

Returns to the previous page.

Rotates the document.

Moves to the next page.

Moves to the last page.

•

Go to: move to another page of the document.

Rotate: rotate the document.

Screen panning

panning mode to by screen or by preset pixel.

Hide controller Show controller: hide or display

/Normal panning: change the

•

the shortcut tool bar in Full screen view.

Send via: send the file via MMS, e-mail, or

Changes the display to Full screen

view or Normal screen view.

Bluetooth.

•

Delete: delete the selected file.

Rename: change the file name.

Bluetooth visibility: share the file or all files with

other Bluetooth devices.

Menu functions

•

Protection: protect the file from being deleted.

Selecting a day

•

Details: access the file properties.

•

Press [Left] or [Right] to move by day.

Press [Up] or [Down] to move by week.

Shortcuts: view the functions of the keys you can

use in Picsel File Viewer.

Press [

] to move by month.

Using calendar options

Memory status (Menu 6.6)

Press <Options> to access the following options:

Use this menu to view memory information for media

items in the phone’s memory. For the phone’s

memory, press [Left] or [Right] to view the memory

status by size or number of items.

•

View by: change the view mode of the calendar.

p. 69

Create: add a new item.

ꢀ

•

ꢀnext section

Go to: select today’s date or enter a specific date.

Event list: sort items by type of item.

Calendar (Menu 7)

The Calendar menu enables you to keep track of your

schedule.

Delete: delete the items stored on the calendar by

using various deleting options.

You can delete recurring events in Day view only.

To access this menu, press <Menu> in Idle mode and

select Calendar

•

Missed alarm events: view items whose alarms

you have missed.

Consulting the calendar

Memory status: access memory information for

the items stored on the calendar.

When you enter the Calendar menu, the calendar in

Month view appears with today’s date indicated by a

blue box.

•

Location: enter information about the location

of the appointment.

Alarm: set an alarm for the appointment.

Before: set how long before the appointment

the alarm is to alert you.

Alarm tone: select an alarm tone.

Repeat: set the appointment to recur and

select a repeat unit.

Until: set the ending date, if the appointment

will recur.

Creating an item

You can store appointments, anniversaries, memos,

and tasks on the calendar. More than one item per day

can be stored.

•

Entering a new appointment

1. Select a date on the calendar.

•

2. Press <Options> and select Create

Appointment

3. Enter information or change the settings:

→

•

4. Press <Save> to save the appointment.

•

Subject: enter a title for the appointment.

Details: enter the appointment details.

Start date and Start time: enter the starting

date and time for the appointment.

AM/PM: select AM or PM in 12-hour time

format.

End date and End time: enter the ending date

and time for the appointment.

AM/PM: select AM or PM in 12-hour time

format.

Entering a new anniversary

1. Select a date on the calendar.

2. Press <Options> and select Create

Anniversary

3. Enter information or change the settings:

→

•

Occasion: enter information about the

anniversary.

•

Date: enter the date.

Alarm: select to set an alarm for the

anniversary.

Menu functions

•

Before: set how long before the anniversary

the alarm is to alert you.

Alarm time: enter the time for the alarm to

ring.

AM/PM: select AM or PM in 12-hour time

format.

Alarm tone: select an alarm tone.

Repeat every year: set the phone to remind

you of the anniversary every year.

•

Due date: enter the ending date.

Select priority: select a priority level.

4. Press <Save> to save the task.

Viewing an item

Once you have scheduled things, the item icons and

the number of items for a specific day appears at the

bottom of the calendar.

•

Appointment

Task

•

Anniversary

Memo

4. Press <Save> to save the anniversary.

Entering a memo

1. Select a date on the calendar.

Accessing an item

1. Select a date on the calendar to display the items

for the day.

2. Press <Options> and select Create

→

Memo.

3. Enter a memo and press <Save>.

2. Select an item to view its details.

Entering a task

1. Select a date on the calendar.

2. Press <Options> and select Create

3. Press [Left] or [Right] to access the other items

scheduled for the selected day.

→

Task

Using options

3. Enter information or change the settings:

While viewing an item, press <Options> to access

the following options:

•

Task: enter information about the task.

Start date: enter the starting date.

•

Edit: edit the item.

•

Create: add a new item.

•

Task priority (Red: high, Blue: normal, Grey:

low)

Send via: send the item via SMS, MMS, e-mail, or

Bluetooth.

Completed task

•

View by: change the view mode of the calendar.

Week view

Delete: delete the item.

You can view items for the selected week. A cell on the

timetable indicates the presence of a schedule item.

Select a cell in the day you want.

Memory status: access memory information for

the items stored on the calendar.

Viewing an item in a different mode

Camera (Menu 8)

You can use the camera module embedded in your

phone to take photos and record videos.

You can change the calendar display to Day view or

Week view. Press <Options> and select View by

view mode.

→

Day view

To access this menu, press <Menu> in Idle mode and

select Camera, or press and hold [

You can view items for the selected date. Select an

item to view its details.

• Do not take photos of people without their

permission.

• Do not take photos in a place where cameras are

not allowed.

• Do not take photos in a place where you may

interfere with another person’s privacy.

The following icons may display to indicate the item

status:

•

Alarm set

Recurring time

Menu functions

In Capture mode, press < > to access the following

options:

Taking a photo

You can take photos in various modes. The camera

produces JPEG photos.

•

Record video: switch to Record mode.

Shooting mode: take a photo in the following

modes:

When you take a photo in direct sunlight or in bright

conditions, shadows may appear on the photo.

Single shot: take a photo in Normal mode. You

can select whether or not the camera automatically

saves a photo.

1. Access the Camera menu or press and hold [

]

turn on the camera.

2. Make any desired adjustments.

Multi shot: take a series of action stills. You can

select the number of photos the camera will take

and the shooting speed.

•

Press < > to access camera options.

next section

Use the keypad to change the camera settings

or switch to other modes. p. 71

3. Press [ ] or [ to take a photo. The photo is

saved in the My photos folder.

ꢀ

•

Mosaic shot: take several stills and save them in

one frame. You can select the layout.

ꢀ

]

•

Effects: change the colour tone or apply a special

effect.

•

Frames: apply a decorative frame.

4. To Press

access photo options Options>.

Flash: determine the use of the flash.

ꢀp. 72

Timer: set a time delay before the camera takes a

photo.

delete the photo

[C] and then <Yes>.

•

Go to My photos: access the My photos folder.

return to Capture mode

<Preview>.

Using camera options in Capture mode

•

Settings: change the default settings for taking a

photo.

•

Camera shortcuts: view the functions of the keys

you can use in Capture mode.

Size: select an image size.

Using the keypad in Capture mode

Quality: select an image quality setting.

Viewfinder: select a preview screen.

Shutter sound: select the sound that you hear

You can use the keypad to customise your camera

settings in Capture mode.

Key

Function

when you press the shutter release, [

] or [ ].

Left/Right

Up/Down

Adjusts the brightness.

Zooms in or out.

Zoom sound: turn the sound effect for zooming

on or off.

Brightness sound: turn the sound effect for

brightness adjustment on or off.

Flips the image vertically.

Shows the mirror image.

Switches to Record mode.

Changes the image size.

White balance: adjust the colour balance of the

image. You can make your photo appear warmer

or cooler.

ꢀp. 72

ISO: change the ISO setting, which controls the

sensitivity of your camera. For low light situations,

select a higher ISO number. The higher the ISO

number, the faster the camera shutter functions

and the more sensitive the camera is to light.

Higher ISO settings may bring some distortion to

an image.

Changes the image quality.

Changes the shooting mode.

Changes the colour tone or applies a

special effect.

Changes the ISO setting.

Menu functions

•

Edit: edit the photo using the Image editor.

p. 38

Key

Function

ꢀ

Selects a decorative frame.

Sets the timer.

•

Delete: delete the file.

Rename: change the file name.

Go to My photos: access the My photos folder.

Goes to the My photos folder.

Changes the preview screen.

Determines the use of the flash.

Changes the white balance.

ꢀp. 61

•

Protection: protect the file from being deleted.

Details: access the file properties.

Recording a video

Using photo options

You can record a video of what is displayed on the

camera screen and save it.

After saving a photo, press <Options> to access the

following options:

1. In Capture mode, press [

1].

•

View: access one of the multi-shot photos.

2. Make any desired adjustments.

Viewfinder: return to Capture mode.

•

Press < > to access camera options.

next section

Use the keypad to change the camera settings

or switch to other modes. p. 74

3. Press [ ] or [ to start recording.

ꢀ

Send via: send the file via MMS, e-mail, or

Bluetooth.

•

ꢀ

•

Set as: set the photo as wallpaper for the display

or as a caller ID image for a Phonebook entry.

]

4. Press [

], < >, or [

]

to stop recording. The

•

Go to My video clips: access the My video clips

folder.

video is automatically saved in the My video clips

folder.

Settings: change the following settings for

recording a video:

5. To

Press

Recording mode: select a video recording mode.

play back the video clip

access video options

delete the video clip

return to Record mode

[

Options>.

Select Limit for multimedia messages/

Wallpaper to record a video suitable for

messaging or for setting as wallpaper. The video

clip is saved in 3GP format.

ꢀp. 74

[C] and then <Yes>.

<Preview>.

Select Normal to record a video within the limit of

the currently available memory. The video clip is

saved in MP4 format.

Using camera options in Record mode

In Record mode, press < > to access the following

options:

Size: select a frame size.

Quality: select an image quality.

Viewfinder: select a preview screen.

Record audio: record audio with a video clip.

•

Take photo: switch to Capture mode.

Effects: change the colour tone or apply a special

effect.

Zoom sound: turn the sound effect for zooming

on or off.

•

Flash: determine the use of the flash.

Timer: set a time delay before the camera starts

recording.

Brightness sound: turn the sound effect for

brightness adjustment on or off.

Menu functions

White balance: adjust the colour balance of the

image. You can make your video appear warmer or

cooler.

Key

Function

Changes the colour tone or applies a

special effect.

•

Camcorder shortcuts: view the functions of the

keys you can use in Record mode.

Mutes or unmutes audio.

Sets the timer.

Using the keypad in Record mode

You can use the keypad to customise your camera

settings in Record mode:

Goes to the My video clips folder.

Changes the preview screen.

Determines the use of the flash.

Changes the white balance.

Key

Function

Left/Right

Up/Down

Adjusts the brightness.

Zooms in or out.

Using video options

Flips the image vertically.

Shows the mirror image.

Switches to Capture mode.

Changes the frame size.

After saving a video clip, press <Options> to access

the following options:

ꢀp. 70

•

Viewfinder: return to Record mode.

Send via: send the file via MMS, e-mail, or

Bluetooth.

Changes the image quality.

Changes the video recording mode.

•

Set as main display: set the video clip, if saved

as a 3GP file, as wallpaper for the display.

•

Delete: delete the file.

specify your time zone in the World time menu.

ꢀ

•

p. 40

Rename: change the file name.

Set time: enter the current time.

AM/PM: select AM or PM in 12-hour time format.

Time format: select a time format.

Set date: enter the current date.

Date format: select the date format.

Go to My video clips: access the My video clips

folder.

•

ꢀp. 62

•

Protection: protect the file from being deleted.

•

Details: access the file properties.

•

Calendar starting day: set which day of the

week the calendar starts with.

Settings (Menu 9)

Phone settings (Menu 9.2)

The Settings menu provides you with various setting

options to customise the phone to your preferences

and needs. You can also reset the settings to their

default status.

Many different features of your phone’s system can be

customised to suit your preferences.

Some menus may not be available, depending on

your service provider.

To access this menu, press <Menu> in Idle mode and

select Settings

Language (Menu 9.2.1)

Time and date (Menu 9.1)

Use this menu to select one of several languages for

the display text. If you select Automatic, the phone

uses the same language as the SIM card.

Use this menu to change the time and date displayed

on your phone. Before setting the time and date,

Menu functions

Using shortcut options

Greeting message (Menu 9.2.2)

Use this menu to enter the greeting that is displayed

briefly when the phone is switched on.

Press <Options> to access the following options:

•

Change: assign or change a shortcut menu.

Remove: deactivate the shortcut assignment to

the selected key.

Slide settings (Menu 9.2.3)

Use this menu to set how the phone reacts when you

open it for an incoming call, and when you close it

while using a function.

•

Remove all: deactivate all shortcut assignments.

Volume key (Menu 9.2.5)

•

Up: set whether or not to answer a call by opening

the phone.

Use this menu to set whether the phone mutes the call

ringer or rejects a call if you press and hold [

when a call comes in.

]

•

Down: set whether or not the phone maintains

the menu you are using when you close the phone.

Extra settings (Menu 9.2.6)

When you set Down to Continue operation, the

keypad lock works only in Idle mode.

You can turn the automatic redialling or answering

feature on or off.

Shortcut (Menu 9.2.4)

•

Auto redial: set the phone to make up to ten

attempts to redial a phone number after an

unsuccessful call.

You can use the Navigation keys as shortcuts to access

specific menus directly from Idle mode. Use this menu

to assign a shortcut to a key.

•

Anykey answer: answer an incoming call by

Assigning a shortcut menu

pressing any key, except [ ] and <Reject>.

1. Select a key to be used as a shortcut key.

2. Select the menu to be assigned to the key.

Brightness (Menu 9.3.4)

Display settings (Menu 9.3)

You can adjust the brightness of the display for

varying lighting conditions.

Use this menu to change settings for the display.

Wallpaper (Menu 9.3.1)

Dialling display (Menu 9.3.5)

You can set up the idle screen on the display.

Use this menu to select a font colour for the numbers

entered while dialling.

•

Main display: select an image or video clip to be

displayed on the display.

Show caller information (Menu 9.3.6)

•

Text position: select a text position. If you don’t

want to display text in Idle mode, select Off

Use this menu to set the phone to display missed call

notifications with the most recently missed caller’s

information.

•

Text mode: select a font style.

Text colour: select a font colour.

Graphic logo: set the phone to display a graphic

icon instead of the service provider’s logo on the

idle screen. This is only available if a graphic icon

has been received in a message.

Sound settings (Menu 9.4)

Use this menu to customise various sound settings.

Incoming call (Menu 9.4.1)

Main menu style (Menu 9.3.2)

Use this menu to change the sound settings for

incoming calls.

You can select a display style for the main menu

screen.

•

Ringtone: select a ringtone to be used for the call

ringer.

Skin (Menu 9.3.3)

•

Volume: select a ringtone volume.

You can select a skin colour pattern for Menu mode.

Menu functions

•

Alert type: specify how you are to be informed of

incoming calls.

Slide tone (Menu 9.4.5)

Use this menu to select the tone that the phone

sounds when you open or close the phone.

Keypad tone (Menu 9.4.2)

Use this menu to select the tone that the phone

sounds when you press a key.

Quiet mode (Menu 9.4.6)

Use this menu to set how the phone acts to alert you

to a specific event while in Quiet mode.

You can adjust the keypad tone volume using [

in Idle mode.

]

Extra tones (Menu 9.4.7)

Message tone (Menu 9.4.3)

Use this menu to customise additional tones for the

phone.

Use this menu to change the sound settings for

incoming SMS messages, MMS messages, e-mails,

and CB messages individually.

•

Minute minder: set the phone to beep every

minute during an outgoing call to keep you

informed of the length of your call.

•

Tone: select one of several message tones.

Alert type: specify how you are to be informed

when a message comes in.

•

Connection tone: set the phone to beep when an

outgoing call connects to the system.

•

Repetition: specify how often the phone informs

you of a new message.

Alerts on call: set the phone to beep when you

receive a new message or when the time for an

alarm comes during a call.

Power on/off (Menu 9.4.4)

•

Indicative tone: set the phone to beep when a

pop-up window displays.

Use this menu to select the melody that the phone

sounds when it is switched on or off.

External light (Menu 9.5.3)

Light settings (Menu 9.5)

Use this menu to activate or deactivate the use of the

service light on the front of the phone. The service

light blinks at regular intervals when your network is

available.

Use this menu to change settings for the light.

Backlight time (Menu 9.5.1)

You can select the length of time the backlight or

display stays on.

Network services (Menu 9.6)

•

Main display normal: select the length of time

the backlight stays on.

Use this menu to access network services. Please

contact your service provider to check their availability

and subscribe to them, if you wish.

•

Main display dim: select the length of time the

display stays on in Dim mode after the backlight

turns off. After a specified time, the display turns

off.

Call diverting (Menu 9.6.1)

This network service reroutes incoming calls to a

phone number that you specify.

Keypad light (Menu 9.5.2)

You can set how the phone controls the use of the

keypad light.

1. Select a call diverting option:

•

Divert always: divert all calls.

Busy: divert calls when you are on another

call.

•

Any time: the keypad light is always used.

Night time: the keypad light is used only between

5:00 PM and 9:00 AM.

•

No reply: divert calls when you do not answer

the phone.

•

Custom time: specify the time period that the

keypad light is used.

Menu functions

•

Unreachable: divert calls when you are not in

an area covered by your service provider or

when your phone is switched off.

•

All incoming calls: prohibit incoming calls.

Incoming while abroad: prohibit incoming

calls when you use your phone outside of your

home country.

•

Cancel all: cancel all call diverting options.

•

Cancel all: cancel all call barring settings,

allowing calls to be sent and received normally.

Change barring password: change the call

barring password obtained from your service

provider.

2. Select the type of calls to be diverted.

3. Select Activate. To deactivate call diverting, select

Deactivate

4. Move to the Divert to line.

5. Enter the number to which calls are to be diverted.

2. Select the type of calls to be barred.

6. If you selected No reply, move to the Seconds

line and select the length of time the network

delays before diverting a call.

3. Select Activate. To deactivate call barring, select

Deactivate

4. Enter the call barring password supplied by your

7. Press <Select>.

service provider and press <Select>.

Call barring (Menu 9.6.2)

Call waiting (Menu 9.6.3)

This network service allows you to restrict your calls.

1. Select a call barring option:

This network service informs you when someone is

trying to reach you while you are on another call.

•

All outgoing calls: prohibit all outgoing calls.

International: prohibit international calls.

International except home: only allow calls

to numbers within the current country when

you are abroad, and to your home country.

1. Select the type of calls to which call waiting option

will apply.

2. Select Activate. To deactivate call waiting, select

Deactivate

•

Connect to voice server: connect to the

voicemail server to listen to your messages.

Network selection (Menu 9.6.4)

This network service allows you to manually select the

network to be used while roaming outside of your

home area, or to let the network be chosen

automatically.

Voice server number: enter the voicemail server

number.

Closed user group (Menu 9.6.7)

You can select a network other than your home

network only if there is a valid roaming agreement

between the two.

Use this menu to set incoming and outgoing calls to be

restricted to a selected user group. For details about

how to create a closed user group (CUG), contact your

service provider.

Caller ID (Menu 9.6.5)

•

Index list: add, delete, or activate CUG index

numbers.

This network service allows you to prevent your phone

number from being displayed on the phone of the

person being called. If you select Default, the phone

will use the default setting provided by the network.

•

Outside access: enable calls to numbers other

than those in the closed user group. This feature

depends on the nature of your CUG subscription.

Some networks may not allow you to change this

setting.

•

Default group: enable the default CUG, if you

have set one with your service provider. When

making a call, you are given the option of using

your default CUG, instead of selecting one from the

list.

Voice mail server (Menu 9.6.6)

Use this menu to store the number of the voicemail

server and access your voicemails.

You must store the voicemail server number before

accessing the server. Your service provider can give

you the number.

Menu functions

Band selection (Menu 9.6.8)

• If there are obstacles between the devices, the

operating distance may be reduced.

For the phone to make and receive phone calls, it

must register with an available network. Your phone

can handle any of the following types of networks:

GSM 1900 and Combined GSM 900/1800.

• It is recommended that you don’t use the

Bluetooth feature while using multimedia features,

such as voice recorder, camera, and music player,

or vice versa, for better performance.

• Some devices may not be compatible with your

phone.

The country where you purchased your phone

determines the default band that it uses. When you

travel abroad, you may need to change to an

appropriate band.

Setting up the Bluetooth feature

The Bluetooth menu provides the following options:

Bluetooth (Menu 9.7)

•

Activation: activate or deactivate the Bluetooth

feature.

Using the Bluetooth feature, you can connect the

phone wirelessly to other Bluetooth devices and

exchange data with them, talk hands-free, or control

the phone remotely.

My devices: search for connectable Bluetooth

devices.

My phone’s visibility: allow other Bluetooth

devices to search for your phone.

Bluetooth technology allows free wireless connections

between all Bluetooth-compliant devices within a

range of 10 meters. Since the devices communicate

using radio waves, they do not need to be in line of

sight to each other.

My phone’s name: assign a Bluetooth device

name to your phone, which is then displayed on

other devices.

•

Secure mode: determine if the phone asks for

your confirmation when other devices access your

data.

•

Bluetooth services: display available Bluetooth

services.

3. Select a device.

4. Enter a Bluetooth PIN and press <OK>. This code

is used just once and you don’t need to memorise

it.

Searching for and pairing with a Bluetooth

device

1. From the Bluetooth setting options, select My

When the owner of the other device enters the

same code, pairing is complete.

devices

Some devices, especially headsets or hands-free car

2. Select Search for new devices

kits, may have a fixed Bluetooth PIN, such as 0000

After searching, a list of devices to which you can

connect displays. The following icons indicate the

type of device:

If the other device has a code, you must enter it.

Using device options

•

Stereo headset

Computer

•

Printer

From the device list, press <Options> to access the

following options:

PDA

•

Connect: connect to a headset or hands-free car

kit.

Mobile phone

Unknown device

Mono headset/

Hands-free car kit

Disconnect: end the connection with the

connected device.

The colour of the icon indicates the status of the

the device:

Browse files: search for data from the device and

import data directly to your phone.

•

Grey for unpaired devices

Blue for paired devices

Red for devices that are currently connected to

your phone

Service list: access the Bluetooth service list of

the device.

Rename: rename the paired device.

Menu functions

•

Authorise device

Unauthorised device

1. If an unauthorised Bluetooth device sends data to

your phone, press <Yes> to allow the device to

access your phone.

determine whether or not the phone asks you to

permit connection when other devices try to

connect to your phone.

2. Press <Yes> to receive data.

•

Delete: remove the selected device or all devices

from the list.

Security (Menu 9.8)

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

Sending data via Bluetooth

1. Activate the Bluetooth feature.

2. Select the application in which the item you want

to send is stored.

If you enter an incorrect PIN/PIN2 three times in

succession, the SIM card is blocked. To unblock it,

you need to enter your PUK/PUK2 (Personal

Unblocking Key). The codes are supplied by your

service provider.

3. Scroll to the item you want and press <Options>.

4. Select Send via

→

Bluetooth.

The phone searches for devices within range and

displays a list of available devices.

PIN check (Menu 9.8.1)

5. Select a device.

The 4- to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

6. If necessary, enter the Bluetooth PIN needed for

pairing and press <OK>.

Receiving data via Bluetooth

Change PIN code (Menu 9.8.2)

To receive data via Bluetooth, your phone’s Bluetooth

feature must be active.

Use this menu to change your PIN. The PIN check

feature must be enabled to change the PIN.

Phone lock (Menu 9.8.3)

Fixed dialling mode (Menu 9.8.7)

Use this menu to lock the phone from unauthorised

use. When this feature is enabled, you must enter a 4-

to 8-digit phone password each time the phone is

switched on.

If supported by your SIM card, Fixed Dialling Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers stored on

the SIM card.

The password is preset to 00000000. To change the

password, use the Change password menu.

Change PIN2 code (Menu 9.8.8)

If supported by your SIM card, use this menu to

change your current PIN2.

Change password (Menu 9.8.4)

Use this menu to change your phone password.

Privacy (Menu 9.8.5)

Connect settings (Menu 9.9)

Use this menu to lock access to messages, files, or all

menu functions on the phone, except for call

functions. When a privacy option is enabled, you must

enter the phone password to access the locked items

or functions.

Use this menu to create and customise the profiles

containing the settings for connecting your phone to

the network. You need these settings to use the web

browser or send MMS messages or e-mails.

Your phone is set up by default for connecting to the

network. If you change the settings without first

checking with your service provider, the web

browser, MMS, and e-mail features may not work

properly.

SIM lock (Menu 9.8.6)

This menu allows your phone to work only with the

current SIM card by assigning a SIM lock code. You

must enter the SIM lock code to use a different SIM

card.

Menu functions

•

Advanced settings: change the advanced

options. Depending on the bearer setting,

available options vary.

Creating a profile

1. Press <New>. If a profile has already been saved,

press <Options> and select Add new

connection

When the bearer is set to GPRS:

2. Set profile parameters:

APN: enter the access point name.

•

Profile name: enter a profile name.

Homepage URL: enter the URL address of the

page to be used as your homepage.

Proxy: activate or deactivate the proxy server.

IP address: enter the IP address of the proxy

server.

Password: enter the login password.

When the bearer is set to GSM

•

Dial number: enter the PPP phone number.

Password: enter the login password.

•

Port: enter the port number of the proxy

server.

Linger time: set a time period after which the

network is disconnected if there has been no

new data traffic in that time.

Data call type: select a call type for data

transmission.

3. Press <Save> to save the profile.

Using profile options

•

DNS: activate or deactivate the DNS (Domain

Name Server) addresses.

DNS 1 and DNS 2: enter the primary and

secondary DNS addresses.

Press <Options> to access the following options:

•

Edit: edit the selected profile.

Delete: delete the profile.

Bearer: select the network bearer type.

Add new connection: add a new profile.

Reset settings (Menu 9.10)

Solve problems

Help and personal needs

Use this menu to reset the phone’s settings you have

changed.

To save the time and expense of an unnecessary service

call, perform the simple checks in this section before

contacting a service professional.

1. Press [

reset.

] to select the setting categories to be

2. Press <Reset>.

When you switch on your phone, the following

messages may appear:

3. Press <Yes> to confirm the reset.

4. Enter the phone password and press <OK>.

The password is preset to 00000000. You can

“Insert SIM”

•

Be sure that the SIM card is correctly installed.

change this password.

ꢀp. 85

“Enter password”

•

The automatic locking function has been enabled.

You must enter the phone’s password before you

can use the phone.

“Enter PIN”

•

You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

•

The PIN check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN check menu.

Solve problems

“Enter PUK”

•

Be sure that you are accessing the correct cellular

network.

•

The PIN has been entered incorrectly three times

in succession, and the SIM card is now blocked.

Enter the PUK supplied by your service provider.

Be sure that you have not set an incoming call

barring option.

“No service,” “Network failure,” or “Not done”

displays

Your correspondent cannot hear you speaking

•

Be sure that you have switched on the

microphone.

•

The network connection has been lost. You may be

in a weak signal area. Move and try again.

•

Be sure that you are holding the phone close

enough to your mouth. The microphone is located

at the bottom of the phone.

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

The phone starts beeping and “Warning. Low

battery” flashes on the display

You have entered a number but it was not dialled

•

Be sure that you have pressed [

•

Your battery is insufficiently charged. Recharge the

battery.

Be sure you have accessed the right cellular

network.

The audio quality of the call is poor

•

Be sure that you have not set an outgoing call

barring option.

•

Check the signal strength indicator on the display

). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

(

Your correspondent cannot reach you

•

Try moving the phone slightly or moving closer to a

window if you are in a building.

•

Be sure that your phone is switched on. ([

pressed for more than one second.)

]

No number is dialled when you re-call a

Phonebook entry

Health and safety information

•

Use the Contact list menu to ensure the number

has been stored correctly.

SAR certification information

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

•

Re-store the number, if necessary.

The battery doesn’t charge properly or the phone

sometimes turns itself off

Your mobile phone is a radio transmitter and receiver. It is

designed and manufactured to not exceed the limits for

exposure to radio-frequency (RF) energy, as

•

Wipe the charging contacts both on the phone and

on the battery with a clean soft cloth.

recommended by the EU Council. These limits are part of

comprehensive guidelines and establish permitted levels

of RF energy for the general population. The guidelines

were developed by independent scientific organisations

through the periodic and thorough evaluation of scientific

studies. The limits include a substantial safety margin

designed to ensure the safety of all persons, regardless of

age and health.

If the above guidelines do not help you to solve

the problem, take note of:

•

The model and serial numbers of your phone

Your warranty details

A clear description of the problem

Then contact your local dealer or Samsung after-sales

service.

The exposure standard for mobile phones employs a unit

of measurement known as Specific Absorption Rate (SAR).

The SAR limit recommended by the EU Council is 2.0

W/kg.^*

The highest SAR value for this model phone was 0.679

W/kg.

Health and safety information

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a base

station, the lower the power output of the phone.

Precautions when using batteries

•

Never use a charger or battery that is damaged in any

way.

•

Use the battery only for its intended purpose.

If you use the phone near the network’s base station,

it uses less power. Talk and standby time are greatly

affected by the signal strength on the cellular network

and the parameters set by the network operator.

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out. When

the operation time is noticeably shorter than normal, it

is time to buy a new battery.

•

If left unused, a fully charged battery will discharge

itself over time.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers.

Disconnect the charger from the power source when it

is not in use. Do not leave the battery connected to a

charger for more than a week, since overcharging may

shorten its life.

* The SAR limit for mobile phones used by the public is 2.0 watts/

kilogram (W/kg) averaged over ten grams of body tissue. The limit

incorporates a substantial margin of safety to give additional

protection for the public and to account for any variations in

measurements. The SAR values may vary, depending on national

reporting requirements and the network band.

•

Extreme temperatures will affect the charging capacity

of your battery: it may require cooling or warming

first.

Do not leave the battery in hot or cold places because

the capacity and lifetime of the battery will be

reduced. Try to keep the battery at room temperature.

A phone with a hot or cold battery may not work

temporarily, even when the battery is fully charged.

Li-ion batteries are particularly affected by

Road safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

When you are driving a car, driving is your first

responsibility. When using your wireless phone while

driving, follow local regulations in the country or region

you are in.

temperatures below 0°C (32°F).

•

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a coin,

clip or pen causes a direct connection between the +

and – terminals of the battery (metal strips on the

battery). For example, do not carry a spare battery in

a pocket or bag where the battery may contact metal

objects. Short-circuiting the terminals may damage

the battery or the object causing the short-circuiting.

Operating environment

Remember to follow any special regulations in force in the

area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

As with other mobile radio transmitting equipment, users

are advised that for the satisfactory operation of the

equipment and for the safety of personnel, it is

recommended that the equipment should only be used in

the normal operating position (held to your ear with the

antenna pointing over your shoulder).

Health and safety information

Other medical devices

Electronic devices

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

Your physician may be able to assist you in obtaining this

information.

Pacemakers

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations

are consistent with the independent research and

recommendations of Wireless Technology Research. If you

have any reason to suspect that interference is taking

place, switch off your phone immediately.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with

the manufacturer or its representative regarding your

vehicle.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Hearing aids

Posted facilities

Switch off your phone in any facility where posted notices

require you to do so.

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

wish to consult your hearing aid manufacturer to discuss

alternatives.

Potentially explosive environments

Emergency calls

Switch off your phone when in any area with a potentially

explosive atmosphere, and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

This phone, like any wireless phone, operates using radio

signals, wireless, and landline networks as well as user-

programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations are

in progress.

communications like medical emergencies.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains chemicals

or particles, such as grain, dust or metal powders, and any

other area where you would normally be advised to turn

off your vehicle engine.

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

3. Press

[

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

Health and safety information

Other important safety information

Care and maintenance

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Keep your phone and all its parts and accessories out

of the reach of small children and pets. They may

accidentally damage these things or choke on small

parts.

•

For vehicles equipped with an air bag, remember that

an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air bag

inflates.

Switch off your phone before boarding an aircraft. It is

dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the operation

of the aircraft.

•

Keep the phone dry. Precipitation, humidity, and liquids

contain minerals that corrode electronic circuits.

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the phone.

Do not use or store the phone in dusty, dirty areas, as

its moving parts may be damaged.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

•

Do not store the phone in cold areas. When the phone

warms up to its normal operating temperature,

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

•

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

•

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you, and

if necessary, arrange for service.

•

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as

a microwave oven, stove, or radiator. The phone may

explode when overheated.

•

When the phone or battery gets wet, the label

indicating water damage inside the phone changes

colour. In this case, phone repairs are no longer

guaranteed by the manufacturer's warranty, even if

the warranty for your phone has not expired.

•

If your phone has a flash or light, do not use it too

close to the eyes of people or animals. This may cause

damage to their eyes.

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

Index

Broadcast messages • 52, 60

Browser, web • 43

photos • 70

videos • 72

CB (Cell Broadcast)messages •

52, 60

Characters, enter • 22

Configuration messages • 50

Connection tone • 78

Converter • 42

Creating messages

e-mail • 49

Display

backlight, set • 79

AB mode, text input • 22

Alarm • 41

Answering

brightness • 77

icons • 10

language • 75

layout • 10

settings • 77

Calculator • 41

Calendar • 66

Call cost • 30

Call log

call • 25

second call • 26

Anykey answer • 76

Auto redial • 76

Diverting, calls • 79

Document files • 64

DRM (Digital Rights

Management) • 61

DTMF tones, send • 27

dialled • 29

missed • 29

received • 29

Call time • 29

Caller groups • 32

Caller ID • 77, 81

Calls

answering • 25

barring • 80

diverting • 79

holding • 26

making • 24

redialling • 24

rejecting • 25

transferring • 28

waiting • 80

Camera

Background image • 77

Backlight time, set

display • 79

MMS • 47

SMS • 47

CUG (Closed User Group) • 81

keypad • 79

E-mails

Backlight time, set • 77

Band selection • 82

Barring, calls • 80

Battery

Date, set • 75

Deleting

creating/sending • 49

deleting • 54

setting • 57

viewing • 53

Emergency calls • 93

call log • 28

e-mail • 53, 54, 55

events • 69

charging • 7

low indicator • 8

precautions • 90

Bluetooth

MMS • 51, 53, 55

phonebook • 31, 33

SMS • 50, 53, 55

Dialled calls • 29

Dialling display, set • 77

FDN (Fixed Dialling Number)

mode • 85

receiving, data • 84

sending, data • 84

settings • 82

File manager • 61

File viewer • 64

MMS messages

creating/sending • 47

Phone

care and maintenance •

display • 10

icons • 10

locking • 85

password • 85

resetting • 87

switching on/off • 8

unpacking • 6

Language, select • 75

Last number, redial • 24

Light settings • 79

Locking

deleting • 51

setting • 56

viewing • 50

Games • 40

Greeting message • 76

Multiparty-call • 28

Music player • 34

Music, downloaded • 63

menu functions • 85

phone • 85

SIM card • 85

Health and safety • 89

Holding, call • 26

Low battery indicator • 8

Name card • 33

Names

Icons, description • 10

Image editor • 38

Images, downloaded • 61

Inbox, messages

e-mail • 53

Phonebook

adding • 31

Memory status

downloaded items • 66

file manager • 66

messages • 60

phonebook 34

Menu style • 77

Message tone • 78

Messages

entering • 22

searching • 30

Network band, select • 82

Network selection • 81

Network services • 79

Numbers

deleting • 31, 33

finding • 30

managing • 33

options • 30

MMS/SMS • 50

International calls • 24

Internet • 43

speed dialling • 32

Photos

searching • 30

storing • 31

editing • 38

taking • 70

viewing • 61

cell broadcast • 52, 60

configuration • 51

e-mail • 49, 53

greeting • 76

MMS • 47, 51

push • 51, 60

Java applications • 40

PIN, change • 84

PIN2, change • 85

Power on/off tone • 78

Privacy • 85

Problems, solve • 87

Push messages • 51, 60

Outbox, messages • 52

Keypad tones

selecting • 78

sending/muting • 27

volume • 78

Password

call barring • 80

phone • 85

SMS • 47, 50

Minute minder • 78

Missed calls • 29

Index

Shortcut • 76

SIM card

Quiet mode

entering • 13

setting • 78

Videos

inserting • 7

playing • 62

recording • 72

Voice recorder

locking • 85

Skin colour • 77

Slide tone • 78

SMS messages

playing • 37

recording • 37

Received calls • 29

Received messages

e-mail • 53

creating/sending • 47

deleting • 50

setting • 55

Voicemail server • 81

MMS/SMS • 50

Recording

Waiting call • 80

Wallpaper • 77

Web browser

access • 43

viewing • 50

videos • 72

Sound settings • 77

Sounds, downloaded • 64

Speakerphone • 27

Speed dial • 32

Stopwatch • 43

Switching on/off

microphone • 27

phone • 8

voice memos • 37

Redialling

automatically • 76

manually • 24

Resetting phone • 87

Ringer

incoming calls • 77

messages • 78

Road safety • 91

bookmarks • 45

World time • 40

T9 mode, text input • 23

Templates, message • 54

Text, enter • 22

Time, set • 75

Timer • 42

Safety

information • 89

precautions • 1

Security, calls • 84

Sent messages • 53

Tripp Lite NB1094GY User Manual
Toshiba MK8016GSG User Manual
Sony DVP C675D User Manual
Sharp CD Player CD DD4500 User Manual
SanDisk SDUFD2AA 2048 User Manual
Sagem MW 302X User Manual
Pioneer Premier DEH P250 User Manual
Philips CD SOUNDMACHINE AZ1839 User Manual
OnStar 17572 R17 User Manual
Nokia N90 1 User Manual