Sony Ericsson T61d User Manual

Mobile Phone T61d  
T61ds  
T61d/ds  
Para obtener una copia en español de esta Guía del  
Usuario, visite nuestra página Web en  
pending U.S. Trademarks owned by Microsoft  
Corporation of Redmond, Washington, U.S.A.  
Unidos, también puede llamar al 1-800-374-2776.  
Trademarks referred to herein are trademarks of their  
respective companies.  
T9 Text Input is licensed under onee or more of the  
Register your new phone, purchase Sony Ericsson  
original accessories, purchase Ericsson original  
accessories and see the latest in products by visiting us  
s
following: U.S. Pat. Nos. 5,818,437, 5,953,541,  
5,187,480, 5,945,928, andU6,011,554; Canadian Pat.  
a
l
No. 1,331,057; Uinited Kingdom Pat. No. 2238414B;  
e
5/02 PBM  
Hong Kong Standard Pat. No. HK0940329; Republic of  
c
r
Singapore Pat. No. 51383; Euro.Pat. No. 0 842 463  
This manual is published by Sony Ericsson Inc., without  
any warranty. Improvements and changes to this manual  
necessitated by typographical errors, inaccuracies of  
(9m6927260.8) DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;  
and additional patents are pending worldwide.  
m
current information, or improvements to programs and/or The BLUETOOTH trademarks are owned by Bluetooth  
o
equipment, may be made by Ericsson Inc., at anCy time  
SIG, Inc., U.S.A.  
and without notice. Such changes will, however, be  
r
Some menus/features are operator dependent.  
incorporated into new editions of thisfmoanual.  
© 2002, Sony Ericsson Inc. All rights reserved.  
“Ericsson”, “Ericsson  
” and “ERICSSON ORIGINAL  
t
L
Publication Number: AE/LZT 123 7191 R1  
o
owned by Telefonaktiebolaget L M Ericsson of Sweden.  
ACCESSORIES” are eacNh registered U.S. Trademarks  
Printed in USA  
“Microsoft”, “Windows” and the design plus words  
“Microsoft Windows” are each either registered and/or  
i
Table of Contents  
Guidelines for Safe and Efficient Use........1  
Limited Warranty .......................................6  
Understanding this User’s Guide...............8  
Getting To Know Your Phone....................9  
Standby Screen Icons................................10  
Getting Started ..........................................14  
Using Menus...............................................20  
Phonebook Menu.......................................21  
Messages Menu..........................................24  
Call Info Menu...........................................25  
Groups ........................................................52  
Touch Tone Service...................................53  
Text Messaging ..........................................54  
Using Voice Commands ............................60  
e
Inputting Text............................................65  
s
WAP Browsing...........................................68  
U
l
Using the Calendar....................................74  
Making Data and Fax Calls......................78  
Troubleshooting.........................................83  
Index ...........................................................86  
a
i
c
r
e
m
Ongoing Call Menu...................................27  
m
Settings Menu ............................................28  
o
Extras Menu...............................................38  
Browser Menu ...........................................44  
My Shortcuts Menu...................................45  
Using the Phonebook.................................46  
Calling Contacts ........................................48  
Editing the Phonebook..............................49  
Synchronizing Your Phone and PC.........51  
C
r
fo  
t
o
N
ii  
Guidelines for Safe and Efficient Use  
Please read this information before using your  
mobile phone.  
Do not attempt to disassemble your product. Only  
Sony Ericsson authorized personnel should perform  
service.  
Recommendations  
If your mobile phone is equipped with infrared, never  
Always treat your product with care and keep it in a  
clean and dust-free place.  
direct the infrared ray at anyone’s eye and make sure  
e
s
that it does not disturb any other infrared units.  
U
Do not expose your product to liquid or moisture or  
humidity.  
l
Antenna  
a
i
Only use an acntenna that has been specifically designed  
Do not expose your product to extreme high or low  
temperatures.  
by Sony Ericsson for your mobile phone. Use of  
r
unauthorized or modified antennas could damage your  
e
Do not expose your product to open flames or lit  
tobacco products.  
mobile phone and may violate regulations, causing loss  
m
of performance and SAR levels above the recommended  
m
Do not drop, throw, or try to bend your product.  
limits (see below).  
o
Do not paint your product.  
C
Efficient Use  
r
Do not use your product when in, or around aircraft, or  
Hold your mobile phone as you would any other  
phone. Do not cover the top of the phone when in use,  
as this affects call quality and may cause the phone to  
operate at a higher power level than needed, thus  
shortening talk and standby times.  
areas posted “turn off two-way radio”.  
fo  
Do not use your product in oan area where a potentially  
Do not place your product or install wireless  
equipment in the area above your car’s air bag.  
t
explosive atmosphere exists.  
N
Do not use the mobile phone when the front and/or  
back cover is removed from the unit.  
Guidelines for Safe and Efficient Use  
1
 
Radio Frequency (RF) Exposure and SAR  
Your mobile phone is a low-power radio transmitter and  
receiver. When it is turned on, it emits low levels of radio  
frequency energy (also known as radio waves or radio  
frequency fields).  
Therefore, the closer you are to a base station, the more  
likely it is that the actual SAR level will decrease.  
Variations in SAR below the radio frequency exposure  
guidelines do not mean that there are variations in safety.  
While there may be differences in SAR levels among  
mobile phones, all Sony Ericsson mobile phone models  
Governments around the world have adopted  
comprehensive international safety guidelines, developed are designed to meet radio frequency exposure  
e
Accessories can signiUficantly affect a mobile phone’s  
s
by scientific organizations, e.g. ICNIRP (International  
Commission on Non-Ionizing Radiation Protection) and  
IEEE (The Institute of Electrical and Electronics  
guidelines.  
l
compliance wiath the radio frequency exposure guidelines.  
i
Engineers Inc.), through periodic and thorough  
For example, the Federal Communication Commission in  
c
evaluation of scientific studies. These guidelines establish  
permitted levels of radio wave exposure for the general  
population. The levels include a safety margin designed  
r
the U.S. requires that some manufacturers’ accessories  
shall be tested, and Sony Ericsson has done so with  
respect to its products. To avoid causing loss of  
e
m
to assure the safety of all persons, regardless of age amnd  
C
performance or radio frequency exposure levels above  
the permissible limits it is recommended that you only  
use Sony Ericsson or Ericsson original accessories  
intended for use with the mobile phone. If you wear the  
mobile phone on your body while it is transmitting, and  
you do not use a Sony Ericsson or Ericsson original body  
worn accessory, please ensure that the mobile phone is  
positioned a minimum of 1.5 cm from your body and that  
health, and to account for any variations in  
measurements.  
o
r
Specific Absorption Rate (SAR) is the unit of  
measurement for the amount of radio frequency energy  
fo  
SAR value is determined oat the highest certified power  
absorbed by the body when using a mobile phone. The  
t
level in laboratory coNnditions, but the actual SAR level of  
the mobile phone while operating can be well below this you are not using an accessory that contains any metal.  
value. This is because the mobile phone is designed to  
use the minimum power required to reach the network.  
2
Guidelines for Safe and Efficient Use  
A separate leaflet with SAR information for this mobile  
phone model is included with the material that comes  
with this mobile phone. This information can also be  
found, together with more information on radio frequency  
Should use the ear opposite the pacemaker to minimize  
the potential for interference.  
If you have any reason to suspect that interference is  
taking place, turn your phone OFF immediately.  
Hearing Aids  
Electronic Devices  
Some digital wireless phones may interfere with some  
e
want to consult your serviUce provider or call your local  
Most modern electronic equipment is shielded from RF  
signals. However, certain electronic equipment may not  
be shielded against the RF signals from your mobile  
phone, therefore:  
hearing aids. In the event of susch interference, you may  
l
Sony Ericsson Cusatomer Care Center to discuss  
i
alternatives. c  
r
Pacemakers  
Other Medical Devices  
e
The Health Industry Manufacturers Association  
recommends that a minimum separation of six (6”) inches  
If you use any other personal medical device, consult the  
manufacturer of your device to determine if they are  
adequately shielded from external RF energy. Your  
physician may be able to assist you in obtaining this  
information.  
m
m
(15 cm) be maintained between a handheld wireless o  
phone and a pacemaker to avoid potential interference  
C
with the pacemaker. These recommendations are  
consistent with the independent research byrand  
Turn your phone OFF in health care facilities when any  
regulations posted in these areas instruct you to do so.  
Hospitals or health care facilities may be using equipment  
that could be sensitive to external RF energy.  
recommendations of Wireless Technology Research.  
fo  
t
Persons with pacemakers:  
o
Should ALWAYS keepNthe phone more than six inches  
from their pacemaker when the phone is turned ON;  
Turn your phone OFF in any facility where posted notices  
so require.  
Should not carry the phone in a breast pocket;  
Guidelines for Safe and Efficient Use  
3
Driving  
Disposing of the Product  
Please check if local laws and regulations restrict the use Your mobile phone should not be placed in municipal  
of mobile phones while driving or require drivers to use  
handsfree solutions. We recommend that you use  
Ericsson or Sony Ericsson handsfree solutions intended  
for use with your product. Please note that because of  
possible interference to electronic equipment, some  
vehicle manufacturers forbid the use of mobile phones in sources as marked on the product. Make sure the cord is  
their vehicles unless a handsfree kit with an external  
antenna supports the installation.  
waste. Please check local regulations for disposal of  
electronic products.  
Power Supply  
Connect the AC power adapter only to designated power  
e
s
positioned so that it will not be subjected to damage or  
U
stress. To reduce risk of electric shock, unplug the unit  
l
a
from any power source before attempting to clean it. The  
i
areeas. Never alter the cord or plug. If the plug will not fit  
Always give full attention to driving and pull off the road  
and park before making or answering a call if driving  
conditions so require.  
AC power adapter must not be used outdoors or in damp  
c
r
into the outlet, have a proper outlet installed by a  
m
qualified electrician.  
Children  
m
DO NOT ALLOW CHILDREN TO PLAY WITH YOUR  
MOBILE PHONE OR ITS ACCESSORIES. THEY  
COULD HURT THEMSELVES OR OTHERS, OR  
COULD ACCIDENTALLY DAMAGE THE MOBILE  
o
Emergency Calls  
C
Mobile phones operate using radio signals, which cannot  
guarantee connection under all conditions. Therefore you  
should never rely solely upon any mobile phone for  
essential communications (e.g. medical emergencies).  
r
fo  
PHONE OR ACCESSORY. YOUR MOBILE PHONE  
OR ITS ACCESSORY MAYtCONTAIN SMALL  
o
PARTS THAT COULD BE DETACHED AND CREATE Emergency calls may not be possible on all cellular  
N
A CHOKING HAZARD.  
networks or when certain network services and/or mobile  
phone features are in use. Check with your local service  
provider.  
4
Guidelines for Safe and Efficient Use  
Battery Use and Care  
Do not disassemble or modify the battery.  
Charge the battery for 12 hours before you use your  
mobile phone for the first time. The battery can only be  
charged in temperatures between +5°C (+41°F) and  
+45°C (+113°F).  
Do not let the metal contacts on the battery touch  
another metal object. This could short-circuit and  
damage the battery.  
Do not allow the battery to be put into the mouth.  
Battery electrolytes may be toxic if swallowed.  
A new battery or one that has not been used for a long  
time could have reduced capacity the first few times it  
is used.  
e
Please check local regulatUions for disposal of batteries or  
Disposing of the Battery  
The battery should never be plsaced in municipal waste.  
The talk and standby times depend on the actual  
transmission conditions when using the mobile phone.  
If the mobile phone is used near a base station, less power  
is required and talk and standby times are prolonged.  
l
call your local Sonay Ericsson Customer Care Center for  
information.  
i
c
r
Use only Ericsson or Sony Ericsson branded original  
batteries and chargers intended for use with your mobile  
phone. Other chargers may not charge sufficiently or may  
produce excessive heat. Using other batteries and  
FCC Statement  
e
This device complies with Part 15 of the FCC rules.  
m
(1) This device may not cause harmful interference, and  
Operation is subject to the following two conditions:  
m
chargers could be dangerous.  
o
Do not expose the battery to extreme temperatures,  
never above +60°C (+140°F). For maximum battery  
capacity, use the battery in room temperarture.  
C
(2) This device must accept any interference received,  
including interference that may cause undesired  
operation.  
fo  
Warning! May explode if disposed of in fire.  
Do not expose the battery to liquid.  
Keep out of children’s reach.  
Turn off your mobile phone before removing  
the battery.  
t
o
For Canadian Customers  
“IC:” before the radio certification number only signifies  
that Industry Canada technical specifications were met.  
N
Use the battery for the intended purpose only.  
Guidelines for Safe and Efficient Use  
5
Limited Warranty  
Sony Ericsson Mobile Communications (USA) Inc.  
either repair or replace the Product in accordance with the  
(Sony Ericsson), provides this Limited Warranty for your terms and conditions stipulated herein.  
mobile phone and original accessory delivered with your  
Sony Ericsson and/or its service partners reserve the right  
to charge a handling fee if a returned Product is found not  
mobile phone (hereinafter referred to as “Product”).  
Should your Product need warranty service, please return to be under warranty according to the conditions below.  
e
s
it to the dealer from whom it was purchased, or contact  
your local Sony Ericsson Customer Care Center (national Conditions  
further information.  
U
l
1
The warranty is valid only if the original proof of  
a
i
purchcase issued to the original purchaser by the  
dealer, specifying the date of purchase and serial  
r
e
Our Warranty  
Subject to the conditions of this Limited Warranty, Sony  
number*, is presented with the Product to be repaired  
or replaced. Sony Ericsson reserves the right to refuse  
warranty service if this information has been removed  
or changed after the original purchase of the Product  
from the dealer.  
If Sony Ericsson repairs or replaces the Product, the  
repaired or replaced Product shall be warranted for the  
remaining time of the original warranty period or for  
ninety (90) days from the date of repair, whichever is  
longer. Repair or replacement may involve the use of  
functionally equivalent reconditioned units. Replaced  
parts or components will become the property of Sony  
Ericsson.  
m
Ericsson warrants this Product to be free from defects in  
m
design, material, and workmanship at the time of its  
o
original purchase by a consumer, and for a subsequent  
C
period of one (1) year.  
2
r
If, during the warranty periodt, this Product fails to  
fo  
What We Will Do  
o
operate under normal use and service, due to defects in  
N
design, materials, or workmanship, Sony Ericsson  
authorized distributors or service partners, in the country  
where you purchased the Product, will, at their option,  
6
Limited Warranty  
 
3
This warranty does not cover any failure of the  
Product due to normal wear and tear, or due to misuse,  
including but not limited to use in other than the  
normal and customary manner, in accordance with the  
Sony Ericsson instructions for use and maintenance of  
the Product. Nor does this warranty cover any failure  
of the Product due to accident, modification or  
adjustment, acts of God, or damage resulting from  
liquid.  
Since the cellular system on which the Product is to  
operate is provided by a carrier independent from  
Sony Ericsson, Sony Ericsson will not be responsible  
for the operation, availability, coverage, services, or  
range of that system.  
8
THERE ARE NO EXPRESS WARRANTIES, WHETHER  
WRITTEN OR ORAL, OTHER THAN THIS PRINTED  
LIMITED WARRANTY. ALL IMPLIED WARRANTIES,  
INCLUDING WITHOUT LIMITATION THE IMPLIED  
WARRANTIES OF MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE  
DURATION OF THIS LIMITED WARRANTY. IN NO  
EVENT SHALL SONY ERICSSON OR ITS LICENSORS  
e
BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL  
s
DAMAGES OF ANY NATURE WHATSOEVER,  
U
INCLUDING BUT NOT LIMITED TO LOST PROFITS OR  
COMMERCIAL LOSS, TO THE FULL EXTENT THOSE  
DAMAGES CAN BE DISCLAIMED BY LAW.  
4
l
a
i
Some counrtries/states do not allow the exclusion or  
m
c
e
limitation of incidental or consequential damages, or  
limitation of the duration of implied warranties, so the  
5
6
This warranty does not cover Product failures caused  
by installations, modifications, or repair or opening of  
preceding limitations or exclusions may not apply to you.  
m
o
the Product performed by a non-Sony Ericsson  
The warranty provided does not affect the consumer’s  
statutory rights under applicable legislation in force, nor  
the consumer’s rights against the dealer arising from their  
sales/ purchase contract.  
C
authorized person.  
r
The warranty does not cover Product failures which  
have been caused by use of accessories or other  
fo  
Ericsson branded original accessories intended for use  
t
peripheral devices which aore not Ericsson or Sony  
* In some countries/regions additional information is  
requested. If so, this is clearly shown on the valid proof  
of purchase.  
N
with the Product.  
7
Tampering with any of the seals on the Product will  
void the warranty.  
Limited Warranty  
7
Understanding this User’s Guide  
A Menu Diagram is located on the inside front cover of  
this User’s Guide. This is a quick overview of the  
menus in your Sony Ericsson mobile phone.  
Your Quick Reference Card gives you information  
about your Sony Ericsson mobile phone that you can  
take with you.  
e
s
U
Text that is seen in the phone’s display is shown in the  
following typeface: Add To Phonebook.  
l
a
i
Softkey names are shown in the following typeface:  
Softkey.  
c
r
e
Key names are shown in the following typeface: C.  
m
When this guide instructs you to press a key, press and  
m
When this guide instructs you to press anCd hold a key,  
release the key.  
o
r
press and hold the key for one ftootwo seconds.  
t
o
N
8
Understanding this User’s Guide  
 
Getting To Know Your Phone  
Phone Views  
The following diagrams illustrate the front, back, and  
bottom views of your phone.  
11 External antenna connector  
12 Headset jack  
1
2
3
4
5
Earpiece  
Side volume keys  
Display  
Left softkey  
Joystick  
(4-way navigation  
with center select  
key)  
Options key (  
Keypad  
Power On/Off key  
Clear key  
13 Back cover latch  
e
11  
13  
s
1
12  
U
l
a
2
3
4
5
6
7
8
9
)
10  
m
9
6
o
7
10 Right softkey  
8
14 Accessory Connector  
(Handsfree, Charger, FM  
radio, MP3, Chatboard, etc.)  
15 Charging connector  
t
o
N
14  
15  
Getting To Know Your Phone  
9
   
Standby Screen Icons  
Every time you power on your phone, you will see the  
standby screen. You will also see the standby screen  
when you exit the menu system. This lists all of the icons  
that could appear on your standby screen.  
lock your keypad. To unlock your keypad press C then  
Yes.  
Active profile indicates the currently-selected profile.  
The available profiles are Normal (no icon), Meeting  
9
(
), Car (  
), Outdoors, (  
) Portable ( ),  
e
10 Call screening ( U) allows you to reject certain  
incomingicalls.  
a
1
2
3
Alarm icon ( ) is displayed if the alarm is set.  
Current Time is displayed.  
s
Home ( ), Work ( ), and TTY (TTY).  
Signal strength (  
) shows the relative signal  
l
strength from the wireless system. More bars indicate  
a stronger signal (maximum of five bars).  
Analog/Digital channel indicator shows whether the  
11 Magic Word ( ) indicator indicates that the Magic  
c
Worrd feature is enabled. See “Magic Word” on  
4
e
phone is operating in analog ( ) or digital ( ) mode.mpage 63.  
5
6
7
Battery (  
) shows the relative strength of yourm  
12 Missed Call list ( ) icon shows the number of  
battery. A full icon indicates a fully-charged obattery.  
unanswered calls you have received. The icon appears  
when you have missed calls.  
Network tag indicates that the phone isCin standby  
mode and is ready for use.  
13 Message icon ( ) indicates that you have received  
an email, voicemail, or text message. The number  
beside the icon indicates the number of messages you  
have waiting.  
14 Voice Memo icon ( ) indicates that you have at  
least one Voice Memo recorded in memory.  
15 TTY indicates that your phone is ready to make and  
receive TTY calls.  
r
Ringer off/Phone silent indicates that your phone  
fo  
will not make ring sounds t(  
) or that your phone will  
not make any sounds(o  
). Press the  
key to enter  
the Options menu to toggle these options on and off.  
N
8
Keylock (  
) indicates that pressing the keys has no  
effect. The keypad is locked to prevent inadvertent  
key presses. Press , Lock Keypad then Select to  
10  
Standby Screen Icons  
         
Options Key  
For example, press the left softkey to select Call List or  
The key allows you to quickly access options for some press the right softkey to select the Menu from the  
functions (options vary based on the function you are  
using). For instance, when you are reading a new text  
standby screen.  
message, you can press the  
forward, or reply.  
for choices such as delete, Keypad  
Use your phone’s keys for the following functions:  
e
Make andUanswer calls.  
Use...  
To...  
Key Functions  
s
Softkeys  
l
a
Sielect a menu, submenu, or setting.  
Your phone is equipped with softkeys. The softkey text  
labels are displayed on the bottom of your display. To use  
the softkey functions, press the left or right key that is  
under the text label on the screen.  
c
Access the Call List from standby.  
r
Left  
e
Press twice to redial the last number  
called.  
softkey  
m
m
End a call or quiet the ringer.  
Go back one level in the menus.  
Leave an option unchanged.  
o
C
r
Right  
softkey  
Press and hold to return to standby.  
right  
left  
softkey  
label  
Press to access the menu tabs from  
standby.  
softkey  
label  
left  
softkey  
right  
softkey  
Standby Screen Icons  
11  
     
Use...  
To...  
Use...  
To...  
Move through menu, lists, or text. Tilt  
up, down, left, or right to scroll.  
Delete numbers/letters from the display.  
C
Delete an item from a list.  
Tilt left or right to access the Main menu  
tabs from the standby screen.  
Clear key  
Press and hold to mute the microphone  
during a call. e  
Press down on the center ( ) to  
activate voice control.  
Press and hold from standby to turn  
s
Joystick/  
Center  
Select  
silent on or off or to lock the keypad.  
U
a  
Enter a menu with options. The options  
l
Tilt to the left for easy access to My  
Shortcuts.  
i
vary depending on what function you are  
currently using.  
c
r
Tilt and hold to the left for quick access  
to the first item in your list of shortcuts.  
Tilt and hold to the right for quick acmcess  
e
OPTIONS  
Press to enter the Options menu from  
standby.  
m
key  
to your contact list.  
o
Tilt up or down (from standby) for easy  
access to your contact list. Your first  
C
Throughout this user’s guide,  
shown when you can use the OPTIONS key.  
will be  
r
contact will be highlighted.  
fo  
If no options are available, a pop-up screen  
will not appear.  
t
o
N
12  
Standby Screen Icons  
 
Use...  
To...  
Use...  
To...  
Enter the digits 0–9 and letters.  
Increase or decrease the volume of the  
earpiece or handsfree loudspeaker during  
a call.  
Move through menus using shortcuts.  
Press and hold for Super dial or  
Phonebook contact access, depending on  
how your phone is configured. See  
“Long Press” on page 23.  
Cycle through menus, lists, and text.  
e
Enter the Status menu from the standby  
Side  
volume  
keys  
s
Digit keys  
screen whUich displays the date, the  
current profile, and other settings.  
l
1
Press and hold  
voicemail.  
for quick access to  
a
i
Press to quiet the ringer.  
c
Press and hold to activate voice dialing  
r
Enter a *.  
e
and automatic speech recognition.  
m
Press and hold to enter a pause (  
character in phone number input.  
)
Press to power your phone on and off.  
You can power your phone off during a  
call or from any menu.  
Asterisk  
key  
m
o
Shift between uppercase and lowercase  
C
Power key  
in text entry.  
r
Enter a #.  
fo  
t
Press and hold to enter a stop (  
)
o
characterNin phone number input.  
Pound key  
Standby Screen Icons  
13  
 
Getting Started  
Before using your phone, you must first attach and charge Attaching Your Battery  
your battery.  
1
Locate the  
connector at  
the end of  
the blue, red,  
and black  
wires.  
5
Charging Your Battery  
To charge your battery for the first time, you must attach  
your phone’s battery to the back of your phone under the  
back cover. Then, you must replace the back cover.  
l
2
Insert the a  
Once you install your battery, you should not need to  
remove it.  
plug. Thie  
c
cable will  
r
e
only fit one  
way. Do not  
force it.  
The battery  
will lay flat.  
m
3
m
o
C
r
fo  
t
o
N
14  
Getting Started  
     
Replacing the Back Cover  
1
Remove the back  
cover. Use one hand  
to press down on the  
back cover latch and  
the other hand to  
slide the cover off  
the phone.  
1
Locate the notches  
along each side of  
the back of the  
phone.  
2
Using the notches  
as a guide, slide  
the back cover  
upward until it  
clicks in place.  
s
U
2
Locate the latcheslat  
the bottom of your  
a
i
phone.  
c
r
e
Changing Front and Back Covers  
m
m
Removing Your Phone’s Covers  
Your phone is equipped with replaceable covers. For  
o
C
more information on ordering additional covers, see  
r
Never use your phone wtith the front or back  
cover removed.N  
“Ordering Accessories” on page 84. fo  
Note!  
o
Getting Started  
15  
 
3
4
Press down on the  
latches while lifting  
the front cover away  
from the phone  
(remove from the  
bottom).  
Replacing Your Phone’s Covers  
1
Place the keypad in the new  
cover, pressing firmly until the  
keys are properly in place.  
Locate the tab on the top of the  
cover.  
2
3
Remove the keypad  
from the cover.  
Holding the front cover atean  
angle, as shown in thes  
illustration, insertUthe tab into  
l
the notch on the phone.  
a
i
4
Slidecthe back cover up and  
r
snap it into place.  
To replace the back cover, see  
5 e  
m
“Replacing the Back Cover”  
on page 15.  
m
If all keys are not functioning  
properly, remove your front and  
back covers, adjust your keypad,  
and reinstall again using steps 2-4.  
o
C
r
fo  
t
o
N
16  
Getting Started  
* It may take up to 30 minutes for a new or fully  
discharged battery to indicate charging. It takes about  
12 hours to fully charge a battery for the first time. For  
optimal performance, do not allow your battery to  
completely discharge.  
Charging Your Battery  
Your phone is packaged with a Lithium Ion (LiIon)  
battery. The battery is not charged when you buy your  
phone, but there may be enough power to switch the  
phone on.  
The battery meter icon ( ) on your standby screen  
indicates how much remaining strength your battery has.  
First Time Battery Use  
e
Fully charge the battery before you use your phone for  
the first time. Your battery can be charged whenever you  
want without affecting its performance. You can also  
charge the battery when the phone is off.  
s
The total remaining talk time depends on the  
Note!  
U
type of battery you use and your position in the  
l
network.a  
Thecphone turns itself off when the battery can  
i
Note!  
r
e
no longer power it satisfactorily.  
12 h.  
m
*
Charging Indicators  
m
Attention Battery Low (with a short beep)  
o
Phone needs charging.  
Optimized Charging (meter pulses continuously)  
Your battery is fully charged when the meter stops  
pulsing.  
*
Getting Started  
17  
   
Charging  
Turning Your Phone On and Off  
1
Make sure that the battery is attached to the phone and Turn your phone On by pressing and holding the power  
that the back cover is properly attached.  
Connect the charger to the electrical outlet.  
key ( ) until your phone turns on. The phone will beep  
(unless silent mode is activated). Turn your phone Off by  
2
Connect the charger to the phone as shown in the picture. pressing and holding the power key until your phone  
The flash symbol on the plug must face upwards. turns Off.  
e
Making and Receiving Calls  
U
The main electrical plug may look different  
depending on the electrical socket in your  
country. The plug may not be used for products Making Calls  
Note!  
s
l
a
other than Ericsson or Sony Ericsson chargers.  
1
Press the numeric keys to enter the phone number you  
i
want to call. The number is shown in the display.  
c
r
The amount of battery power indicated by your  
battery icon is an estimate that may vary  
Note!  
e
You can press C to erase one or more digits  
mNote!  
depending on your charging and use patterns.  
To ensure adequate power supply, keep yomur  
in the display, or press and hold C to erase  
all digits.  
o
battery fully charged.  
C
r
2
Press Call. The number you are dialing is shown in  
the display while your phone accesses the wireless  
network.  
Disconnecting the Charger  
Move the plug connected to the phone  
1
fo  
t
upwards to remove it, as shown in the  
3
After the call is connected, the phone number that you  
dialed, or the corresponding contact name, will remain  
on your screen. The current time is replaced by the  
call timer.  
2
o
picture.  
N
18  
Getting Started  
   
4
To end the call, press the right softkey. The duration of Receiving Calls  
the call is displayed on your screen. When your phone receives a call, the ringer sounds,  
Incoming Call appears in the display, and the display and  
For optimal performance, hold your phone near keypad backlight illuminate. You can temporarily quiet  
Note!  
the base to eliminate interference with the  
internal antenna signal.  
the ringer by pressing the right softkey or the upper or  
lower side keys, and still answer the call by pressing the  
left softkey. If you have Caller Number Identification  
e
Making Emergency Calls  
Enter the local emergency number and press the left  
softkey.  
(Caller ID) service from your service provider, the  
s
caller’s phone number is shown in the display. The  
U
caller’s name will also appear if the phone number is  
l
a
found in your phonebook.  
i
Auto Keylock and Phonelock do not prohibit  
Note!  
c
r
emergency number access.  
Changing the Earpiece Volume  
During a call, you can change the earpiece volume by  
pressing one of the side volume keys.  
Dial the international access code, the country code, mPush up to increase the volume.  
e
m
Making International Calls  
1
o
the area code (without the leading zero) and tChe phone  
Push down to decrease the volume.  
number.  
Press Call.  
r
2
Muting the Microphone  
fo  
During a call, you can turn off the microphone.  
t
Check with your serovice provider if you are  
Note!  
having problemNs making international calls.  
Press and hold C until Microphone Muted appears in  
the display.  
Press and hold C again to resume the conversation.  
Getting Started  
19  
   
Using Menus  
The main menu has icons that display the top-level  
menus. The corresponding title of the selected option is  
displayed below the menu tabs when highlighted. Each  
menu is represented by an icon. A menu diagram is  
located on the inside front cover of this user’s guide.  
s
Accessing Menus  
U
1
2
Scroll to Settings, Select, Display, Select, Menu  
Press the center select key or the left softkey to choose  
the menu, function, or setting that is highlighted.  
Help, Select. l  
a
i
Select On or Off by tilting your joystick up or down.  
c
Prerss Select.  
Tilt the joystick up, down, left, or right to navigate  
through the menus.  
Press the right softkey to go back one level in the menu m  
e
structure or to cancel the current action.  
m
o
Cycle through the menus by pressing theCupper or  
fo  
lower side volume keys.  
To help you use the menus and functionrs, your phone has  
pop-up help texts that explaintthe menus.  
o
These help texts are set to On when you buy your phone,  
but you can turn them  
N
off at any time.  
20  
Using Menus  
     
Phonebook Menu  
For more information on using the phonebook, see  
“Using the Phonebook” on page 46.  
My Numbers  
The My Numbers submenu has the following functions:  
To display your mobile phone number(s).  
Call Contact  
To display which mobile number your phone is  
currently using if your phone is econfigured for multiple  
Phonebook entries will appear in alphabetical order by  
either first or last name, depending on the sort order you  
chose. Select an entry or type in the position number and  
press the left softkey to call the highlighted number.  
s
subscriptions.  
U
If your service provider allows multiple  
l
Note!  
a
i
subscriptions, the My Numbers submenu  
allows you to select which phone number the  
phone will use when placing or receiving a call.  
Add Contact  
c
r
You can store several phone numbers and an email  
address for a phonebook entry. Once you have entered all  
of your contact information, press the left softkey to add  
e
m
If you have not activated a second number with your  
service provider, and the display indicates the second  
number as selectable (default=ten zeroes), and if you  
select the second number as your active number, your  
phone will not be able to make or receive calls. Be sure to  
select your active phone number using the My Numbers  
submenu.  
m
the entry to your phonebook.  
o
C
contact is dependent on your service provider.  
fo  
The ability to store an email addrerss for a  
Note!  
t
Edit Contact  
o
You can locate and update your phonebook entries  
whenever you want. These entries are also listed in their  
sort order.  
N
Phonebook Menu  
21  
     
Groups  
Dialing delay; Code first or Number first; Verification  
number; and Dialing delay again.  
You can organize the members of your phonebook into  
categories. This feature can be used for call screening if  
your network supports Caller ID. You can also send SMS Set Calling Cards  
messages to all group members at one time.  
You can select which calling card to use for a particular  
call. You can select a specific calling card by pressing  
your joystick up or down untiel the calling card you want  
Calling Cards  
You can store calling card numbers to use for making  
local and long distance calls. The options are Card Setup highlighted selection.  
and Set Calling Cards.  
to use is highlighted. Press the left softkey to choose the  
s
U
Onlyacards that have been set up will appear as  
l
Note!  
i
You will be prompted to enter your PIN to enter  
the Calling Cards submenu. The default PIN  
is 0000.  
options for Default card.  
Note!  
c
r
e
mEnter or recall the phone number you want to call.  
Making a Calling Card Call  
1
2
m
Card Setup  
Press the left softkey. The calling card access number  
is shown in the display.  
o
To set up your calling cards, make sure youChave the  
Calling Card Access Numbers (numberrs provided by  
3
Release the key after the number has been displayed.  
your long distance service provider) and the Verification  
If you are using stops between numbers, you must press  
the left softkey to send the next sequence of numbers. If  
you use pauses, the numbers are sent automatically after  
the specified length of time chosen for the dialing delay.  
For more information on Stops and Pauses, see “Stop and  
Pause Dialing” on page 46.  
Numbers (numbers you must enter to allow the calling  
fo  
t
card call to be completed).  
o
When you enter the Card Setup submenu, you are  
prompted for the following information: Your PIN; the  
Name of your calling card; the Access number; the  
N
22  
Phonebook Menu  
   
Options  
to press and hold keys 2-9 and your list of phonebook  
entries corresponding to the closest letter mapped to the  
key pressed will be displayed.  
You can edit phonebook positions, change phonebook  
entry sort order, set long press functionality, ask to save  
confirmation, or delete all phonebook entries.  
The 1 key is reserved for your voicemail access  
Note!  
Edit Positions  
number.  
You can change position numbers associated with all of  
the entries you have in your phonebook for easier access  
to speed dial positions.  
e
phonebook entry uponlcall completion. If the phone  
Ask to Save  
s
You have the option of storing a dialed phone number as a  
U
number is already saved in your phonebook, you will not  
If you synchronize your computer’s contact list  
with your phone’s contact list, the position  
numbers in your phone’s contact list will be  
overwritten.  
Note!  
a
i
be prompted to save it to your phonebook again.  
Delete Allr  
c
e
You can delete all of the phonebook entries that are stored  
inmyour phone. When you select Delete All, you will be  
Sort Order  
m
prompted to confirm that you want to delete all of the  
positions in your phonebook. If you press the left softkey,  
you will be prompted for your phonelock code. You must  
correctly enter your phonelock code to delete all of your  
phonebook entries.  
You can choose whether you want your phonebook  
entries searched by first name or last name.  
o
C
r
You can specify the outcome of a t“press and hold” on a  
Long Press  
fo  
digit key. The options are SuperSpd Dial, Phb. Shortcut,  
o
Memory Status  
and Off.  
N
You can see how much of your phone’s memory is vacant  
and how much is being used. The number of entries used  
is listed first, and the total number of positions available  
is listed in parentheses.  
Enabling SuperSpd Dial allows you to press and hold  
keys 2 through 9 to dial the number corresponding to the  
phonebook position. Enabling Phb. Shortcut allows you  
Phonebook Menu  
23  
 
Messages Menu  
The Messages menu contains choices for specifying and SMS  
accessing message services that may be available from  
your service provider (for example, text messages and  
voicemail). For details on sending and receiving  
messages, see “Text Messaging” on page 54.  
The SMS submenu contains the following submenus:  
Received Mail, Send New, Chat, Unsent Mail, Sent Mail  
Templates, Empty Mailboxes, Options, and Memory  
Status. For more informationeon sending and receiving  
U
text messages, see “Text Messaging” on page 54.  
s
Call Voicemail  
The Call Voicemail submenu allows you to enter and  
access your voicemail access number if you have  
voicemail service from your service provider.  
Options  
l
a
i
Message options will appear when you are in the  
Messages menu. To see the Message options, press  
.
c
r
For more information on using the options, see “Message  
e
You can store your voicemail access number(s) so that a  
number automatically displays when you receive a  
voicemail notice.  
Options” on page 54.  
m
Options may include: Message Alert and Voicemail No.  
m
o
Once you have stored your voicemail access number, you  
Memory Status  
C
can retrieve voicemail messages by pressing and  
You can see valuable information about what percentage  
of the phone’s memory is available for SMS messages. The  
information is displayed as % Locked, % Memory Free.  
1
. Contact your service provrider if you do not  
holding  
know your voicemail access number.  
fo  
Scroll to Messages, Soelect, Options, Select,  
t
1
Call Voicemail No., Select.  
N
2
Enter your voicemail phone number and press OK.  
24  
Messages Menu  
     
Call Info Menu  
The Call info menu allows you to view information and  
establish dialing and answering preferences for your  
phone (some selections available in this menu are  
dependent on your service provider). It also enables you  
to view and edit system options and call statistics.  
Call List  
Press the left softkey to view the last 30 received, missed,  
and sent calls.  
From this list you may view details, call, add the number  
to your phonebook, or delete the number.  
e
Call: Select the numberUyou would like to call. Press  
s
Missed Calls  
the left softkey to call the number.  
You can see the list of calls you have missed (if you have  
Caller ID service from your service provider) along with  
the time that the calls were received. When a missed call  
is one day old, the time that the call was received is  
replaced with the date that the call was received. The  
latest call appears first. Tilt your joystick up or down to  
scroll through the list. The Missed Calls icon  
l
for theafollowing options:  
c
Press  
i
Edit Before Call allows you to change the number  
r
e
before dialing.  
m  
CC Call allows you to dial the number using a calling  
m
card.  
o
indicates a missed or unanswered call.  
Add Number allows you to add the number to your  
C
Phonebook.  
If the received number is stored in the phonebook with a  
r
name, the name is also shown in the dfispolay. To dial the  
Delete allows you to erase the number from your  
phone number shown in the displaty, press the left softkey  
twice. To edit the phone number, press once, scroll to  
o
Call List.  
One of the following icons will appear next to each  
number in the Call List.  
Edit Before Call then press Select. Then tilt the joystick  
N
to the left or right to move the cursor left or right to the  
digit(s) that you would like to change. Dial the new  
phone number by pressing the left softkey.  
Indicates a missed call in your Call List.  
Call Info Menu  
25  
           
Incoming Time  
You can see the total length of all of your incoming calls  
since you last reset your phone.  
Indicates an incoming call in your Call List.  
Indicates an outgoing call in your Call List.  
Usage Tracker  
SMS Counter  
You can use these options to easily track your phone use.  
You can see the total number of SMS messages you  
have sent.  
e
Last Call  
s
You can view information about the duration of your last  
phone call in hours, minutes, and seconds.  
Clear  
U
options are Caall Timers and SMS Counter. Call timers  
You can reset your call time and/or your call counter. The  
l
i
outegoing and incoming. SMS counter resets the total  
Total Calls  
resets the total time and total number of calls, both  
c
r
You can see the total number of calls and the total hours,  
minutes, and seconds that you have used since you last  
reset your phone.  
number of incoming and outgoing SMS messages.  
m
m
o
Minute Minder  
The actual time your service provider invoices  
Note!  
You can choose if you want to hear a sound every minute  
during phone calls. The options are On and Off.  
C
may vary, depending on items including  
r
network features and rofunoding off for billing.  
Options  
t
Outgoing Time  
o
You can see the totalNlength of all of your outgoing calls  
Clear Call List  
You can delete the list of your 30 most recent calls.  
since you last reset your phone.  
26  
Call Info Menu  
 
Ongoing Call Menu  
You can access Ongoing Call menu only when you are on Switch Calls  
a call. To access the Ongoing Call menu, tilt the joystick  
to the left or right until you see Ongoing Call and press  
You can change from one active call to another. Select  
Switch Calls by tilting the joystick up or down until  
Select. The options for Ongoing Call are Turn Off Tones, Switch Calls is highlighted and then select it by pressing  
Hold Call, Switch Calls, Release Active, Retrieve Call,  
and the Call Info menu.  
the left softkey.  
e
s
Release Active  
You can end the active call by selecting Release Active.  
Select Release Active by tilting the joystick up or down  
U
These features are dependent upon your service  
provider.  
Note!  
l
a
i
until Release Active is highlighted and then select it by  
c
Turn Off Tones  
r
pressing the left softkey.  
e
The Turn Off Tones submenu allows you to make notes  
(digits only) during a call without disturbing the person  
on the other end with dialing tones. When you Turn Off  
m
Retrieve Call  
m
You can recover a held call and make it active. Select  
Retrieve Call by tilting the joystick up or down until  
Retrieve Call is highlighted and then select it by pressing  
the left softkey.  
Tones, you can use your phone as a scratchpad and enter  
o
digits that will remain on the display after the call has  
C
ended. When the call is complete, the tones will return  
r
to On.  
fo  
t
Call Info  
Hold Call  
o
You can return to the Call Info menu by tilting the  
joystick up or down until it is highlighted and then select  
it by pressing the left softkey.  
You can place a call on hold to set up another call or to  
N
answer a waiting call. Select Hold Call by tilting the  
joystick up or down until Hold Call is highlighted and  
then select it by pressing the left softkey.  
Ongoing Call Menu  
27  
     
Settings Menu  
Sounds & Alerts  
Increasing Ring  
You can change the sounds and alerts on your phone.  
When you select Increasing Ring, the ring volume will  
continue to increase until you answer or reject the call.  
You can activate or deactivate Increasing Ring by  
Ring Volume  
e
You can set the level of the ring volume. The volumes  
range from Off to High. You can change the Ring Volume  
by moving your joystick to the right (to increase the  
volume) or to the left (to decrease the volume). Press the  
left softkey or press the joystick to confirm your  
selection.  
choosing On or Off.  
s
U
Vibrating Alert  
Your phone has a lbuilt-in vibrating alert function so you  
can receive calls or messages silently. The options are  
a
i
On, On ifcSilent and Off.  
e
r
If you set the Ring Volume to level one, you  
Ring Sounds  
Note!  
m
will hear only a series of beeps when you  
You can choose the type of sound or melody for the ringer  
receive an incoming call regardless of the Ring for Voice Calls, Fax Calls, Data Calls, and Personal  
m
o
Signal you have set.  
Rings. Each sound or melody is demonstrated as you  
scroll through the selections. There are multiple ring  
sounds, some of which you can create yourself.  
C
r
You can specify that you do ntot want your phone to make  
Phone Silent  
fo  
icon on your screen  
keypad or alert sounds. The  
Alarm Sound  
o
indicates that your phone is in Silent. You can activate or You can select different types of melodies or signals to  
N
deactivate Phone Silent by choosing On or Off.  
hear when your alarm sounds.  
28  
Settings Menu  
           
Message Alert  
Your phone comes with eight customizable melodies. The  
My Melodies submenu includes Edit options. In addition,  
you can download custom melodies using your phone’s  
browser. See “Downloading Melodies Using Your  
WAP Browser” on page 72.  
Choose which type of sound you will hear when you  
receive an incoming SMS, voicemail, or browser  
message. The options are Silent, Click, and Tone.  
My Melodies  
Your mobile phone has the capability to load, store and  
You can create or edit a ring melody using each key on  
your keypad as a note (1=C, 2=D, 3=E, 4=F, 5=G, 6=A,  
7=B, 8=+C, 9=+D, 0=+, *=pause, #=#). Hold the key to  
cycle through all four note lengths (for example, f, f., F,  
F.). Press # to make the previous note sharp or flat. Once  
you personalize a melody, you can select it as a Ring  
Sound.  
forward additional ringtone melodies. The use of such  
e
s
melodies may be restricted or prohibited by rights of third  
U
parties, including but not limited to restriction under  
l
applicable copyright laws. You, and not Sony Ericsson,  
a
are entirely respoinsible for additional melodies that you  
c
download to or forward from your mobile phone. Prior to  
r
use of aeny additional melodies, please verify that your  
intended use is properly licensed or is otherwise  
m
The + sign indicates an octave higher.  
Note!  
authorized. Sony Ericsson does not guarantee the  
m
accuracy, integrity or quality of any additional ringtones  
or any other third party content. Under no circumstances  
will Sony Ericsson be liable in any way for your improper  
use of additional ringtones or other third party content.  
To clear your melody, tilt the joystick left or right to o  
C
select the location you want to clear. Press the left softkey  
to play the melody. Press and hold C to delerte multiple  
notes.  
fo  
t
This feature is dependent on your service  
provider.  
Note!  
o
Volume is the same as your current Ring  
Note!  
N
Volume.  
Settings Menu  
29  
Editing My Melodies  
Voice Privacy  
You can block others from eavesdropping on your  
telephone calls. The options are On With Tone, On But  
No Tone, and Off.  
Press a key to enter a note.  
There are four different lengths of notes.  
Press 0 to change the octave.  
Press # once to raise the note one semitone.  
Press # twice to lower the note one semitone.  
Press C to remove notes.  
This feature is dependent on your service  
Note!  
provider.  
e
s
To listen to your melody, press the left softkey.  
Profiles  
U
A profile is a group of settings which are set to suit a  
l
a
certain environment. For example, when you go to a  
Key Sound  
i
numberr of settings that suit a meeting are set. For  
meeting, you can simply choose the Meeting profile and a  
Choose which type of sound you will hear when you  
press a key. The options are Silent, Click, and Tone. Tone  
c
e
instance, the ring volume is turned off.  
psurochviadsestealecpohnotnineuboaunsksiinggn,awl,hmiloerceliscukitapbrolevifdoersaactqivuiitcieks m  
m
Select Profile  
You can choose a different profile from the currently  
selected Profile. The available profiles are Normal (no  
burst signal.  
o
You can choose which, if any, sound yoru will hear when  
C
Access Tone  
icon), Meeting (  
), Car (  
), Outdoors, (  
)
Portable ( ), Home (  
), Work ( ), and TTY (TTY).  
your phone makes a voice connec  
f
tion. The options for  
o
t
Access Tone are On and oOff.  
Edit Profile  
N
You can customize your profiles by specifying settings  
for specific items. The options for Edit Profile are Ring  
Volume, Phone Silent, Increasing Ring, Vibrating Alert,  
Minute Minder  
You can choose to be notified when each minute passes  
while you are engaged in a call. Settings are On and Off.  
30  
Settings Menu  
 
Ring Sounds, Message Alert, Key Sound, Accept Calls,  
Auto Area Code, Auto Prefix, Answering Mode, Light,  
Text Size, Profile Name, and Accessories. For example,  
in Meeting profile, you might want to set your Vibrating  
Alert to On and your Ring Volume to Off. When you go  
into a meeting, you can select Meeting profile. If you  
receive a call during your meeting, your phone’s  
Vibrating alert feature will notify you of an incoming  
call, but your ringer will not sound and disturb other  
meeting participants.  
and Accepted List. Under Accept Options, you  
can choose From All, From List (you can create a  
list of callers that will cause your phone to ring), and  
From No One.  
Forward Calls  
You can forward the incoming calls that you are unable to  
answer. The options are Activate, eDeactivate, and Setup.  
U
s
This feature is dependent on your service  
Note!  
l
provider.a  
c
i
Yrou will need separate codes from your service  
The Normal profile cannot be renamed.  
Note!  
Note!  
e
View Profile  
provider to turn the feature on and off.  
m
You can view the attributes of the currently selected profile.  
m
Once you have entered these codes, select Activate, then  
enter the number to which you want your calls forwarded.  
Your phone will send the appropriate information to your  
service provider to set up this feature.  
o
Reset Profiles  
C
You can reset all profile settings to the way rthey were set  
when you bought your phone.  
fo  
t
Call Options  
Restrict Calls  
You can block specific calls from being dialed  
or answered. The options are Incoming Calls or  
o
N
Accept Calls  
You can specify the phone numbers that you would like to Outgoing Calls.  
accept calls from. Your choices include Accept Options  
Settings Menu  
31  
 
Once you enter your code, select Activate to turn Call  
Waiting on and Deactivate to turn Call Waiting off.  
If you forward incoming calls, you cannot  
activate some Restrict Calls options. Likewise,  
if you restrict calls, you cannot activate some  
Forward Calls options.  
Note!  
Note!  
During a call, you can also use the Switch Calls  
Note!  
option to change between the two calls.  
You must enter your phonelock code to set call  
restrictions.  
Auto Area Code  
You can store an area code that will be automatically  
added to the 7-digit phone number that you are dialing.  
The options are On and Off. The area code is  
e
s
U
Call Waiting  
l
You can answer an incoming call while you are engaged  
in a call. The options are Activate, Deactivate, and  
Setup. Setup allows you to customize your service.  
a
automatically added to the phone number you are calling  
i
when Auto Area Code is set to On. When you select On,  
c
r
you will be prompted for the area code you want to use.  
e
This feature is dependent on your service  
provider.  
Note!  
m
Auto Prefix  
m
You can store a 1- to 12-digit prefix, which is automatically  
added to the dialed phone number. When you dial a 4- or  
5-digit phone number, the prefix is automatically added to  
the phone number. The options are On and Off.  
o
Turn off Call Waiting when placinCg data calls.  
Note!  
Note!  
r
When you select Setup, you will need to enter  
fo  
the code for activating/deactivating this feature.  
In order to send a number to office extensions, store the  
3-digit prefix in the Auto Prefix submenu. You only need  
to dial the last four or five digits of the phone number.  
t
This code is givoen to you by your service  
N
provider.  
For example, if you save 123 as the auto prefix and the  
function is On, you can call 123-7654 by simply  
dialing 7654. The prefix 123 is automatically added to the  
32  
Settings Menu  
   
phone number after you press the left softkey to dial the  
phone number. The auto prefix is not added for phone  
numbers longer than five digits.  
Data and Fax  
You can specify which type of call you are planning to  
receive. The options for Data and Fax are Next Call  
Voice, Next Call Data, and Next Call Fax.  
Answering Mode  
You can specify how you want to answer your calls. The  
Display  
options are Normal, Any Key, and Auto. Selecting Normal Your options for Display are Light, Display Sleep,  
Background, Text Size, Contrast,eUser Greeting, and  
indicates that pressing the left softkey will answer a call.  
Selecting Any Key indicates that a call can be answered by Menu Help.  
pressing any key except the right softkey. Selecting Auto  
indicates that a call will be answered automatically.  
s
U
l
a
i
Light  
You can set the display and keypad backlighting to stay  
c
when aecall is received or a key is pressed.  
r
Auto Retry  
On or Off or to automatically turn On for 30 seconds  
You can automatically redial a number without dialing,  
hanging up, and dialing again by setting Auto Retry to  
On. Auto Retry is used when the system is busy  
m
m
Display Sleep  
o
regardless of whether the receiver’s phone is busy.  
Use Display Sleep to save battery power. The text in  
standby mode is reduced to one row at the middle of the  
display a few minutes after you have pressed the last key.  
C
r
Voice Privacy  
You can block others from eavesdropping on your  
fo  
telephone calls. The options are Otn With Tone, On But  
N
This feature is dependent on your service  
provider.  
Note!  
o
No Tone, and Off.  
This feature is dependent on your service  
provider.  
Note!  
Settings Menu  
33  
Background  
Menu Help  
Use Background to select a picture that will appear in  
your standby screen.  
You can choose to have a brief description of each top-  
level menu item to be displayed after 10 seconds of  
inactivity. These help texts are set to On when you buy  
your phone, but you can turn them off at any time.  
Text Size  
You can change the display text size to Small, Medium, or  
Large. Changing the text size alters the number of lines of Language  
You can select the display laneguage used in the phone  
display. The languages vary between markets.  
text that appear on your display and alters the font size.  
s
U
Contrast  
l
a
Menu Language  
i
Use Contrast to adjust the difference in brightness  
between the light and dark areas of your display by tilting You can select in which language you would like the  
c
r
the joystick left or right or by pressing the up or down  
side volume keys.  
phone’s menu to appear. The options are English,  
Russian, Hebrew, Spanish, French, and Portuguese.  
e
m
m
User Greeting  
You can change the screen that you see when youopower  
Input Language  
You can select which language you would like to be able  
to input text in. The options for Input vary according to  
the T9™ Text Input setting.  
C
on your phone. The options are a list of Ericsson Movie,  
My Greeting, My Animation, and Off. Yrou can download  
additional software to change your power-up/power-down  
fo  
All languages are not available in every area.  
Note!  
t
animation from www.SonoyEricsson.com.  
N
T9 Predictive  
You can determine whether predictive text is displayed  
during text input. The options are On and Off.  
34  
Settings Menu  
 
Time and Date  
Date Format  
You can switch between date formats by tilting the  
joystick up or down until the format you want is selected.  
Press the left softkey to confirm your selection.  
Set Time  
You can enter the correct time in the format using the  
keys on your keypad.  
Locks  
If you select the 12-hour clock, you can  
alternate between am and pm by tilting the  
joystick up or down.  
Note!  
e
Phonelock  
s
You can prohibit your phone from making calls, except  
emergency calls, each time you turn the phone on. To  
set your Phonelock, you will be prompted to enter your  
U
l
Time Settings  
a
i
You can set additional time-related settings. The options  
are Time Format (24 hour or am/pm), Time Zone  
(±GMT), DaylightSavings (On or Off), and Auto Time  
Zone (On of Off). The options for Auto Time Zone are  
No Update, Ask To Update, and Auto Update.  
security code. The options are Set Phonelock and  
c
r
Change Code.  
e
m
You will be prompted to enter your PIN to enter  
set your Phonelock. The default PIN is 0000.  
m Note!  
To synchronize your phone with your compouter,  
C
be sure to set both to the same timre zone.  
Note!  
Auto Keylock  
You can prohibit your phone from keypad presses. Auto  
Keylock activates after 30 seconds of inactivity. The two  
options for Auto Keylock are On and Off. The keypad  
remains locked until you:  
fo  
Set Date  
t
You can enter the correct date using the keys on your  
o
keypad. You will be prompted for month, day, and year  
N
information. You can tilt the joystick left or right to  
Unlock the keypad by pressing C then Yes.  
advance through the month, day, and year selection. Press  
the left softkey to confirm the current date.  
Settings Menu  
35  
   
Answer a call (after the call is completed, the keypad is Networks  
returned to the locked state). You can prioritize and manually select the systems from  
which you can obtain service. This can include your  
public home system as well as private and residential  
systems. This function is particularly useful if you have  
access to more than one mobile system. Only systems  
The Auto Keylock and Phonelock features  
allow emergency number access even if the  
Auto Keylock or Phonelock are active. To  
unlock your keypad, press C then Yes.  
Note!  
that are currently available caen be selected. This varies  
depending on your geographic location. You will be  
s
Voice Control  
prompted to enter your PIN to make any modifications.  
U
This is typically not necessary so you should contact your  
l
a
Voice Settings  
service provider before making any network changes.  
i
Notre! These features are dependent on your service  
You can turn voice control features on or off and train the  
commands for using these features. The options are Voice  
Dialing, Voice Answer, Voice Memo, and Magic Word.  
c
provider.  
e
m
For more information, see “Using Voice Commandsm” on  
Select Network  
page 60.  
You can manually initiate a search for a new network.  
o
C
Voice Commands  
New Private  
r
You can choose to view your list of voice commands.  
fo  
You can search for private systems that are not programmed  
into your phone. Once the search is complete, you will be  
provided with a list of available systems.  
Commands include Magic Word, Voice Dialing, Voice  
Answer, Contacts, and Voice tMemo  
N
o
Erase Voice Tag  
You can delete all of your voice recordings. You will be  
prompted before the recordings are permanently deleted.  
36  
Settings Menu  
Priority  
You can change the order of the system types for which  
your phone searches. Your default Priority is  
(1) Residential, (2) Private, and (3) Public. This means  
that your phone will look for service on a Public system  
first, followed by a Private system, followed by a  
Residential system.  
e
s
Reset Settings  
You can reset all of your phone settings to the factory  
defaults.  
U
l
a
i
c
r
You must enter your phonelock code to reset all  
of your phone’s settings to the factory defaults.  
Note!  
e
m
m
Data Comm.  
In order to browse the web, you must enter settings foor a  
C
data account in your phone.  
r
While Data Comm. appears on your Settings  
Note!  
fo  
supported by your service provider.  
t
menu as an option, tohis feature may not be  
N
Settings Menu  
37  
Extras Menu  
Voice Memo  
Calendar  
You can record and store memos in your phone. For more Your calendar can store up to 250 events and up to  
information on Voice Memo, see “Using Voice  
Commands” on page 60.  
100 tasks on your phone. For more information, see  
“Using the Calendar” on page 74.  
e
s
Record  
Time  
U
You can enter a new voice memo.  
l
Alarm Clock  
a
i
Memo List  
The phone has an alarm clock which rings at the time set,  
c
You can see your list of voice memos viewable by date,  
time, or length. Scroll to the voice memo you want to  
hear and press Play. You can erase or rename your voice  
r
even if the phone is turned off. The alarm rings for  
60 eseconds. After 60 seconds, you will be asked if you  
m
want to turn the alarm off. To turn the alarm off, press the  
left softkey. If you do not want the alarm to be repeated,  
press the left softkey again. The options for Alarm Clock  
are Alarm and Recurrent Alarm. An Alarm sounds one  
time. A Recurrent Alarm sounds on a regular interval.  
memos by pressing  
once you are in your Memo List.  
m
o
Erase Memos  
You can permanently delete your voice memos You will  
be prompted to confirm deletion of all voice memos  
before they are deleted.  
C
r
fo  
Time and Date  
You can edit your time and date information. For more  
information, see “Time and Date” on page 35.  
t
o
Set View  
N
You can see attributes of your memos. The options are  
Date Recorded, Time Recorded, and Length.  
38  
Extras Menu  
         
Timer  
You can also set scores in Games by using the left or  
The phone has a built-in 24-hour countdown timer. You  
set the time you want and when that time is up, the phone  
beeps.  
right navigation key to set the letters of your name.  
Extended playing of Games will significantly  
Note!  
reduce your battery talk and standby times.  
Stopwatch  
Your phone has a built-in stopwatch. The left softkey  
starts and subsequently pauses the Stopwatch. The right  
softkey resets the Stopwatch.  
Pictures  
e
s
Editing and saving a picture  
U
1
2
3
Scroll to Extras, Pictures.  
l
Select a pictureagroup.  
You can save up to nine lap times by pressing  
Note!  
i
picturesr. Select a picture and press Edit to view the  
Lap while the Stopwatch is running.  
Tilt the joystick up or down to scroll through the  
c
e
Games  
editing tools. You can now start to edit the picture. See  
m
Your phone has several games.You can control the games  
the table below.  
Press  
m
4
using your joystick and the keys on your keypad andoyou  
to view your options.  
can end the game by pressing the left softkey. UCse the  
5
Select Save. The picture is saved in My Pictures.  
joystick to move up, down, left, or right and to select an  
How to use the keys when editing a picture:  
r
item, or use the keypad as follows:  
Press… to…  
fo  
2=up  
4=left  
8=down  
o
6=right  
t
1
2
3
4
move the cursor up and left.  
move the cursor up.  
N
C=pause  
Cancel=save/quit  
#=undo  
5=select/deselect  
Select=confirm  
*=reset  
move the cursor up and right.  
move the cursor left.  
Extras Menu  
39  
   
Adding a picture to My Favorites  
Press… to…  
1
2
Scroll to Extras, Pictures.  
Select a picture group.  
5
lift up or put down the pen.  
Press and hold to switch between zoom and  
full size view.  
3
4
Select a picture and press  
Press Yes to add the picture.  
.
6
7
8
9
move the cursor right.  
You can delete the edited pictures from Pictures, but you  
cannot delete the original pictures that were in the phone  
e
move the cursor down and left.  
move the cursor down.  
when you bought it.  
s
U
Deleting a picturle from My Favorites  
a
move the cursor down and right.  
move the cursor 1, 5, or 10 spaces.  
1
Scroll to Extras, Pictures, My Pictures.  
i
Scroll to ca picture and press C.  
r
e
SAVE and exit the picture.  
Calculator  
m
The phone has a built-in calculator, which can add,  
subtract, multiply, and divide.  
m
CANCEL and exit the picture editor.  
o
C
Press the digit keys to enter the numbers you want  
to calculate.  
Tilt the joystick right or left to highlight an  
operation (+, -, x, /, add decimal).  
Press the left softkey to perform the operation.  
Press the right softkey to cancel the operation.  
r
C
press and hold to clearfthoe picture.  
switch line thickness.  
t
o
switch between black and white pen color.  
N
40  
Extras Menu  
Code Memo  
To work with a TTY accessory, activate TTY by scrolling  
You can store personal information, like your computer  
to TTY in the Extras, Headset Jack menu, and pressing  
password, in your phone. You will only have to remember Select.  
one password to access all personal codes and passwords.  
Your phone is now set to work with a recommended TTY  
device. To verify that your phone is in TTY Mode, insert  
the TTY cable end 2.5 mm plug into your phone’s audio  
You will be prompted to enter a 4-digit password,  
followed by a 4- to 15-character check word. If an  
incorrect password and/or check word is entered, an error  
message is displayed.  
jack (to the right of the display). TTY will display in small  
e
print on the lower left corner osf the display. You can now  
U
accept and send TTY calls.  
Headset Jack  
l
a
i
You can use your TTY terminal with your Sony Ericsson  
mobile phone. The following is a list of options available  
under the Headset Jack menu:  
Options Listcon Options Key  
There are some options available when TTY is selected  
r
e
and a call is ongoing. To view these options, press  
Use SonyEricssonPHF with the portable hands-free  
during a TTY call.  
m
accessory that comes in the kit (default setting).  
In-Ear PHF improves intelligibility with third-paorty  
m
1
Turn On VCO, if VCO is turned off and Turn Off  
VCO, if VCO is turned on.  
portable handsfree devices that fit in the ear cCanal.  
2
Turn On HCO, if HCO is turned off and Turn Off  
HCO, if HCO is turned on.  
r
Over-Ear PHF improves the intellfigiobility with third-  
party portable handsfree devicets that hook over and  
rest outside the ear.  
o
Select TTY to work with TTY devices.  
N
Vehicle HF reduces echo heard by remote party when  
using third-party vehicle handsfree device which is  
typically powered by the cigarette lighter.  
Extras Menu  
41  
 
Optimum Use  
The handset Turn on HCO Mode option and  
Turn on VCO Mode option should not be used  
if external HCO/ VCO features are built into  
the TTY device. The handset option items are  
intended as an alternative method of gaining  
access to HCO and VCO, but are not required  
to be activated if the external TTY device has  
the HCO/VCO feature.  
Note!  
TTY communications can be conducted from moving  
vehicles, however, it may be dangerous to operate a  
vehicle and communicate on your mobile phone at the  
same time. You may experience a higher character error  
rate of the TTY conversation while in motion. For the  
highest quality communicatioens, it is best to remain  
stationary.  
s
U
The TTY feature works in most signal strength areas. You  
l
After you have verified that your phone operates in TTY  
mode and you want to switch back to handheld phone  
operation, unplug the 2.5 mm plug from your phone. You  
can then use your phone normally.  
may experiencae a higher character error rate in low signal  
handset to get a better signal to reduce the character  
i
coveragecareas. You may be able to move the cellular  
r
e
errors.  
m
If you want to switch from handheld to TTY operation  
Status Information  
(after you are in TTY mode), simply re-insert the 2.5 mm  
m
You can access the status screen by pressing the upper or  
lower side volume key when you are not on a call. The  
screen will display the handset’s TTY status when TTY  
mode is On.  
o
plug into the handset jack. You will know yCour phone is  
fo  
back in TTY operation because the TTY symbol will  
reappear in the lower lefthand corner of your display.  
r
Your Sony Ericsson mobile phone has a menu  
Note!  
TTY Call Types  
t
o
pressed within 19 seconds.  
timer that cNlears the display if a key is not  
The TTY mode turns On TTY capability in the phone and  
allows the phone to signal to 911 centers, 711 centers,  
landline users, and users of other cell phone devices.  
You can also place calls to TTY users that use other  
42  
Extras Menu  
digital wireless cell phone technologies, such as CDMA  
or GSM.  
The Sony Ericsson PHF accessory selection is  
the default. This selection remains active until it  
is changed.  
Note!  
e
Technical Assistance  
s
For information on Accessible Solutions for individuals  
with Special Needs, contact the Sony Ericsson Special  
Needs Center:  
U
l
a
i
c
1-877-878-1996 (TTY)  
1-877-207-2056 (voice)  
r
e
m
Visit the Sony Ericsson Special Needs Center at  
m
o
C
Accessories  
The Accessories submenu allows you to work with the  
accessories that are currently connected to your phone.  
r
fo  
t
simultaneously,Nyou will receive a warning that  
o
When more than one accessory is in use  
Note!  
you may experience performance degradation.  
Extras Menu  
43  
 
Browser Menu  
For more information about the WAP services menu, see Clear Cache  
WAP Browsing” on page 68.  
Use this submenu to delete the list of previously visited  
web sites and conserve browser memory.  
Homepage  
You can launch your phone’s browser and go directly to  
the Mobile Internet.  
WAP Settings  
You can choose the WAP gateway that you want to use  
for browsing.  
e
s
U
Bookmarks  
You can see the list of Bookmarks that you have set.  
l
a
i
c
r
This feature is operator dependent.  
Note!  
e
m
Enter Address  
m
You can key in a web address that you want to voisit.  
C
This feature is operator depenrdent.  
Note!  
Resume  
fo  
t
Use this submenu to restaort browsing.  
N
Select Profile  
Use this submenu to change your profile while browsing.  
You can establish 3 different profiles.  
44  
Browser Menu  
   
My Shortcuts Menu  
Edit shortcuts  
You can place your favorite functions in My Shortcuts so  
that you can quickly and easily reach the functions you  
use most. When you buy your phone, My Shortcuts  
contains a few functions which you can remove if you  
wish.  
e
s
U
1
2
3
Scroll to My Shortcuts, Select, Edit Shortcuts,  
Select.  
Select the function you want to edit by pressing  
CHECK.  
Clear the current position number by pressing C and  
then enter the position number you want for the  
l
a
i
c
r
e
m
m
selected function and press OK.  
Press the left softkey to CHECK or UNCHECK yoour  
4
5
C
settings.  
r
Press the right softkey to exit. You will be prompted to  
save your settings. Press the left softkey to save your  
fo  
settings or the right softkey to tcancel your settings.  
N
o
My Shortcuts Menu  
45  
     
Using the Phonebook  
You can create your personal phonebook by saving  
information about your friends and colleagues as a  
contact. In a contact, you can save details such as name,  
title, phone numbers, and e-mail address – all in one  
place.  
save the entry in your phonebook.  
If voice dialing is on, you are asked if you want to  
save a voice tag for the contact.  
The ability to store an email address for a  
Note!  
e
contact is dependent on your service provider.  
s
Adding Contacts  
U
For each contact, you can fill in the following  
information: first name, last name, company, title, home  
phone number, work phone number, mobile phone  
number, fax number, other phone number, and e-mail  
address. The contacts are saved in the phone.  
Each phone number saved occupies one  
position in the memory. You can save up to  
500 phone numbers in the phone.  
Note!  
l
a
i
c
r
e
Stop and Pause Dialing  
m
Stop and pause dialing lets you enter groups of numbers  
m
You can toggle between Multitap and T9 while with stops and pauses between each group of numbers.  
Note!  
o
in a text field by pressing  
input method.  
This feature is useful when you need to dial a phone  
number and then another number, such as an access  
number for an answering machine or voicemail system.  
then Cchoosing an  
r
Adding New Contacts  
fo  
Press the left softkey and enter a first name. Press the  
A stop causes the phone to stop transmitting numbers  
until you press the left softkey. You can enter a stop in a  
series of digits by pressing and holding # or by pressing  
, and then selecting Insert Stop. A is shown in the  
phone number whenever there is a stop.  
t
Scroll to Phonebook, oSelect, Add Contact, Select.  
left softkey twiceNand enter a last name, and so on.  
1
2
3
When you have filled in the information you want,  
press the right softkey to exit. You will be prompted to  
46  
Using the Phonebook  
           
A pause temporarily suspends transmitting numbers for  
approximately two seconds before sending the next  
series. You can enter a pause in a series of digits by  
pressing and holding * until is shown in the display.  
For example, if your office has a voicemail system that  
requires you to dial a phone number, followed by your  
extension, followed by an access code, you could enter  
the following: 555-1111 2222 33333.  
e
s
U
When you press the left softkey, your phone dials the  
number and then stops transmitting tones. When your  
voicemail system asks for your extension you would  
press the left softkey to transmit your extension. The  
access code is sent after the pause. If the timing in your  
voicemail system does not allow for pauses, you can  
l
a
i
c
r
e
m
enter a stop instead of the pause, or use multiple pauses.m  
o
You can also store groups of numbers which can include  
C
stops and pauses in a location. You can thenrdial the  
numbers by entering the location and fproessing Call.  
t
o
N
Using the Phonebook  
47  
Calling Contacts  
You can find and call a phone number saved in a contact  
by searching for either the first or last name, depending  
on which sort order you have set.  
For example, pressing and holding 2 takes you to the first  
contact beginning with the letter A (or closest following).  
You must activate Phb. Shortcut under the  
Long Press submeneu before using this shortcut.  
Note!  
Selecting a Sort Order  
1
Scroll to Phonebook, Select, Options, Select, Sort  
Order, Select.  
s
Speed Dialing  
U
2
Select a sort order and press Select.  
Speed dialing allows you to press the digits (2-99) that  
l
a
correspond to your phonebook position numbers. Then,  
i
SueperSpeed Dialing  
Calling Contacts  
press the left softkey to dial the number in that position.  
c
r
1
2
Scroll to Phonebook, Select, Call Contact, Select.  
You will see your contact list. Scroll to the contact you m  
would like to call, press Call.  
Enabling SuperSpd Dial allows you to press and hold  
keys 2 through 9 to dial the number corresponding to the  
phonebook position.  
m
3
Scroll to the number you would like to call, poress Call  
to make the call.  
C
r
Shortcuts to Contacts  
When in standby, you can find a contact by pressing and  
The 1 key is reserved for quick access to  
voicemail.  
Note!  
Note!  
fo  
t
holding one of the keys 2-9 to find a contact beginning  
o
You must activate SuperSpd Dial under the  
Long Press submenu before using this shortcut.  
with a specific letter.N  
48  
Calling Contacts  
           
Editing the Phonebook  
You can edit a contact in the phonebook with the Edit  
Contact function.  
2
You will see your contact list. Scroll through the list  
using your joystick and press the left softkey when the  
contact you want to call is highlighted.  
1
2
Scroll to Phonebook, Select, Edit Contact, Select.  
You will see your contact list. Scroll through the list  
using your joystick and press the left softkey when the  
contact you want to edit is highlighted. If the contact  
shown is not the one you want, tilt the joystick up or  
down until you find the correct contact.  
3
4
5
Press Select to select a contact.  
Select Default Number and press Select.  
Select the number you want asethe default phone  
number. Press Select.  
s
U
l
a
i
Deleting Contacts  
1
2
3
Press the left softkey. Select Edit Name or Edit  
Number and press the left softkey. You can also edit  
the position for a phone number by selecting Edit  
Position or edit the voice command for the contact  
name by selecting Edit Voice Tag.  
Scroll to Phonebook, Select, Edit Contact, Select.  
You will see your contact list. Scroll through the list  
using your joystick and press the left softkey when the  
contact is highlighted.  
Press C to delete the contact.  
Press Yes to confirm.  
c
r
e
m
m
3
4
5
Tilt the joystick up or down to go to the details that  
o
4
you want to edit.  
When you have made your changes, press the left  
softkey. Scroll to Save and Exit atfthoe bottom of the  
C
To delete all contacts select Phonebook, Select,  
Options, Select, Delete All, Select.  
r
list and press the left softkey. t  
Setting Default Numbers  
You can organize your phonebook so that the phone  
numbers you use most frequently are easily available.  
You can, for example, have certain numbers saved in  
positions 1-9 to be able to speed dial them.  
o
N
1
Scroll to Phonebook, Select, Edit Contact, Select.  
Editing the Phonebook  
49  
   
Changing Position Numbers  
1
2
3
Scroll to Phonebook, Select, Options, Select, Edit  
Position, Select.  
Scroll to the phone number you want to move, press  
Select.  
Scroll to the position to which you want to move the  
phone number and press the left softkey. The phone  
numbers switch positions.  
e
s
4
When you have finished, press the right softkey.  
U
l
a
i
c
r
e
m
m
o
C
r
fo  
t
o
N
50  
Editing the Phonebook  
Synchronizing Your Phone and PC  
To enhance use of your Phonebook features, you may  
want to purchase XTNDConnect PC or download a free  
abbreviated version of XTNDConnect PC (does not  
include email capabilities). XTNDConnect PC is a  
software application that allows you to synchronize your  
contacts, calendar, and tasks between your mobile phone  
and popular PC applications on your computer.  
e
s
U
l
To use your mobile phone with the XTNDConnect PC  
program, you will need the following:  
a
i
c
r
A functional serial port on your computer  
Microsoft Windows 95/98 SE/Me/NT4/2000  
e
m
A serial interface cable (RS232 Cable DRS-11)  
m
Mobile Phone Monitor (a software interface  
o
C
between your mobile phone and the r  
XTNDConnect PC software)  
Purchase XTNDConnect PC  
fo  
t
(http://www.extendsystoems.com/go/ericsson) or  
download a free version of XTNDConnect PC  
N
for Sony Ericsson phones only  
(www.SonyEricsson.com).  
Synchronizing Your Phone and PC  
51  
   
Groups  
You can create groups of contacts. In this way you can  
send a text message to several recipients at the same time.  
Editing Group Names  
1
2
Scroll to Phonebook, Select, Groups, Select.  
Select the group name that you want to edit and press  
Select.  
Creating New Groups  
1
2
3
4
5
Scroll to Phonebook, Select, Groups, Select.  
Select Add Group and press Add.  
Enter a name for the group and press Add.  
Scroll to Add Member, Add.  
Enter the first letter of the contact you want to add.  
Press OK. The phone will jump to the first contact  
whose name begins with that letter. If the contact  
shown is not the one you want, tilt the joystick up or  
down until you find the correct contact. Press Add.  
3
4
Select Edit Group Name and press Select.  
e
Enter the new name of the group and press OK.  
s
U
Deleting Group Members  
1
2
l
Scroll to Phonebook, Select, Groups, Select.  
Select the group that you want to edit and press  
a
i
c
r
Select.  
e
3
Select Edit and press Select.  
Scroll to the member that you want to delete and press  
the C key.  
m
5
4
m
6
7
Select a number and press Select.  
To add the next member, scroll back to Add Member  
Press Yes to confirm your choice.  
o
C
and press OK.  
Deleting Groups  
1
2
r
Scroll to Phonebook, Select,fGoroups, Select.  
Scroll to Phonebook, Select, Groups, Select.  
Select the group that you want to delete and press  
Select.  
Select Delete Group and press Select.  
Press Yes to confirm your choice.  
Adding New Members to Existing Groups  
1
2
3
t
Select the group that you want to edit and press  
o
3
4
Select.  
N
Scroll to Edit, Select, Add Member, OK. Continue  
the same way as when you add a new member to a  
new group.  
52  
Groups  
   
Touch Tone Service  
You can save a phone number together with tone signals  
and codes in your phonebook. When you call this entry,  
the phone number and all the tone signal codes are then  
dialed automatically. This could be useful, for example,  
when accessing an answering machine or when using  
telephone banking services.  
e
s
U
Saving personal codes in the phonebook  
involves a risk if your phone is stolen. It is safer  
to save personal codes in the Code Memo. See  
“Code Memo” on page 41.  
Note!  
l
a
i
c
r
e
m
Scroll to Phonebook, Select, Add Contact, Select. m  
1
2
Press Edit and enter the name that you want to  
associate with the phone number and code. PCress OK.  
o
3
4
Scroll to Other and press Edit.  
Enter the phone number. Press and hold r  
until the  
pause character ( ) appears in the display. Enter the  
fo  
t
code, if needed, enter another pause, another code and  
o
Scroll to Save and ExNit and press Edit.  
so on. Press OK.  
5
Touch Tone Service  
53  
 
Text Messaging  
You can send and receive text messages with the Short  
Message Service (SMS) using your mobile phone.  
Message Read Ack.  
You can choose if you would like a return receipt once  
a sent message is read by the recipient.  
You cannot send SMS messages when your  
phone is in analog mode.  
Note!  
This feature is operator dependent.  
Note!  
e
s
This feature is operator dependent.  
Msg. Priority  
Note!  
U
You can set the delivery options for your text message.  
l
a
i
Before Sending Messages  
You have several text messaging options that you can  
specify.  
Subject  
c
You can specify a subject for your text message.  
r
e
Nickname  
m
You can select a nickname to send your message from  
when doing SMS Chat.  
Message Options  
You can create the settings below as default for all ymour  
o
messages, or you can turn on the option SetCOn Send,  
Sending Messages  
which means that you choose the settings each time you  
You can use your keypad to enter the message you want  
to send. You can send your message to one person or to a  
predefined group, specified and saved in the phonebook.  
For more information on how to create groups, see  
“Groups” on page 22. When you send text messages  
to a group, you are charged for each member included in  
the group.  
r
send a message.  
fo  
Message Type  
t
You can select how you want your text message to be  
o
interpreted by the recipient.  
N
54  
Text Messaging  
             
1
2
Scroll to Messages, Select, SMS, Select, Send New,  
Select.  
Enter the recipient’s number or press , Groups,  
Select, highlight the group that you want to send the  
message to, Select.  
Enter your message and press OK.  
Press OK to send the message. Sending msg appears  
in the display followed by Message has been sent.  
2
3
4
Select the message you want to send and press OK.  
Press Select again.  
Select Send and press Select. You may now edit your  
message.  
Press OK and send the message as previously  
described.  
5
6
7
3
4
Enter the recipient’s number or tilt the joystick to the  
e
left to retrieve the number from the phonebook.  
s
Press OK to send the message.  
U
Sending Messages to Groups  
You can send an SMS message to a Group.  
l
a
If the recipient’s phone does not support long  
messages, the messages are received one at a  
Note!  
i
c
1
Scroll to Messages, Select, SMS, Select, Send New,  
Select.  
When you are prompted for the phone number, press  
tirme.  
e
2
m
Templates  
, Groups, Select, highlight the group that you want  
m
If you have one or more standard messages that you often  
use, you can save these as templates in your phone. You  
can save up to ten templates consisting of up to  
50 characters each.  
to send the message to, Select. For information about  
o
setting up Groups, see “Groups” on page 52.  
C
r
Saving the Message for Later Use  
fo  
Press the right softkey after you have entered your  
message. The message is saved intthe Unsent menu.  
N
Creating a Template  
1
o
Scroll to Messages, Select, SMS, Select, Templates,  
Select, Add New, ADD.  
Enter the message and press OK.  
Sending a Message Later  
2
1
Scroll to Messages, Select, SMS, Select, Unsent  
Mail, Select.  
Text Messaging  
55  
 
3
4
To send the message now, press Select when Use  
template for this msg.? appears in the display, and  
proceed as described in “Sending Messages” on  
page 54. The message is saved in the list of templates.  
Please get ___ from ___ by ___.  
Please pick me up from ___ at ___.  
See you later.  
If you do not want to send the message now, press the To delete a template you have created, highlight the  
right softkey. The message is saved as a template for  
later use.  
template you want to delete, and press C. You will be  
asked to confirm deletion of the template. Press the left  
e
softkey to confirm deletion. You cannot delete any of the  
s
Using a Template  
standard templates included in your phone.  
U
If you want to use a template as a message, scroll to  
Messages, Select, SMS, Select, Templates, Select,  
select the template you want from the list and then press  
Select. The following Templates are included:  
l
a
Receiving Text Messages  
i
theemessage New message Read now? appears in the  
When you receive a text message, the phone beeps and  
c
r
display.  
Add new? (Allows you to enter text and save as a new  
m
template)  
m
Reading Text Messages  
o
I will be home at ___.  
1
Press the left softkey when you see the question  
New message Read now?.  
C
I will be at ___ until ___.  
r
I will be ___ late for ___ on ___.  
fo  
If you have received several messages, and you press  
the left softkey at the question above, you enter the  
Received mail. Select the message that you want to  
read and press the left softkey.  
There is a meeting with ___ about ___ on ___.  
t
o
OK, I got it.  
N
2
Scroll through the message by tilting the joystick up  
or down. An arrow in the bottom right-hand corner of  
the display indicates that there is more text in the  
Please call ___ at ___.  
Please call me back.  
56  
Text Messaging  
 
message. All parts of a long message may not be  
received at the same time... indicates that part of the  
message has yet to be received.  
List of Options  
If you select a message, you can see a list of options:  
Reply, Delete, Chat, Read Next (if applicable), Lock,  
Forward Msg., and Call (if applicable).  
If the sender of the message wants you to reply,  
the display shows Reply requested Reply?  
when you press the left softkey at the end of the  
message. Press the left softkey again to reply. If  
you do not want to reply, press the right softkey.  
Note!  
Deleting Messages  
There are two ways to delete a meessage:  
s
Select Delete in the list of options and press  
U
Select.  
l
a
Saving Messages to Read Later  
Press the right softkey when you see the question New  
message Read now?  
In the Received Mail menu, scroll to a message  
and press the C key.  
i
c
r
e
The message is saved in the phone and an envelope icon  
appears at the top of the display. If you want to read the  
Replying to Messages  
m
1
m
2
In the Options menu, Select Reply and press Select.  
Select the way you want to reply to the message:  
enter a new message  
message, you can retrieve it from the Received mailo  
menu.  
C
r
include the message you want to reply to and enter  
a reply  
indicates an unread message. fo  
indicates that the message is locked.  
t
use a template and enter a reply and press Select.  
o
3
Enter your reply and press Select to send the  
N
No icon indicates that the message has already  
been read.  
indicates that the message is marked as Urgent.  
message.  
Text Messaging  
57  
Forwarding Messages  
1
Messages, Select, SMS, Select, Options, Select,  
Nickname, Select.  
Press and hold C to delete your default nickname.  
Enter your new nickname. For information on  
entering letters and symbols, see “Inputting Text” on  
page 65.  
1
2
3
Select Forward in the list of options, press Select.  
You can now edit the message. Press OK.  
Enter the recipient’s phone number, or tilt the joystick  
to the left to retrieve the number from the phonebook  
or the call list. Press Select to send.  
2
3
e
Calling the Message Sender  
Select Call in the list of options and press Select.  
Starting a Chat Session  
s
1
2
Messages, Select, SMS, Select, Chat, Select.  
U
Enter the recipient’s phone number or tilt the joystick  
l
a
To call a phone number found in a message,  
press Select when the number is highlighted  
and then press Select again.  
left to select a contact.  
Note!  
i
3
Write your message, Send.  
c
r
e
mNote!  
The Chat icon (  
) will appear on your  
standby screen when you are in an active Chat  
session.  
SMS Chat  
m
SMS Chat works in the same way as Chat on the Internet.  
You can initiate a Chat session or you may be invited to  
participate in a Chat session.  
o
C
Receiving a Chat Session Invitation  
When you receive a Chat session invitation, the phone  
beeps and the message Chat Message, Chat Now?  
appears.  
r
This feature is operator dependent.  
Note!  
fo  
t
o
Before Chatting  
N
To read the Chat message, press Yes.  
To reply, press Yes.  
Before you participate in a Chat session, you may want to  
change your nickname from the default.  
To suspend a Chat session, press No.  
58  
Text Messaging  
 
To resume a Chat session, scroll to Messages, Select,  
SMS, Select, Chat, Select, Resume.  
To end a Chat session, scroll to Messages, Select,  
SMS, Select, Chat, Select, End (phone number).  
To reject a Chat message, press No. The rejected Chat  
message is saved in Inbox in the Messages menu.  
e
If you receive a new Chat message while another Chat  
session is ongoing, press Yes to end the ongoing  
session and start the new one.  
s
U
l
a
i
Add a nickname to your Chat messages (and  
SMS messages). Scroll to Messages, Select,  
SMS, Select, Options, Select, Nickname, store a  
nickname that will appear with every Chat message  
you send.  
c
r
e
m
m
o
C
r
fo  
t
o
N
Text Messaging  
59  
Using Voice Commands  
With your phone, you can:  
Recording Voice Tags  
1
Scroll to Settings, Select, Voice Control, Select,  
VoiceCommand, Select, Contacts, Select, Add  
Voice Tag, OK.  
voice dial - call someone by saying the name and  
number type  
answer and reject calls with your voice when using a  
handsfree kit  
2
3
Select a contact and press Select.  
e
Follow the instructions in the display.  
s
record or listen to voice memos by using voice  
commands  
U
whicah have a voice command.  
Note!  
An iconl(  
i
) appears next to the contact names  
activate the voice control by saying a “magic word”  
c
r
You can save up to 10 voice commands (such as call,  
busy, or answer) and 18 voice tags (names). When  
recording voice commands, make sure you are in a quiet  
EditingVoice Tags  
e
1
m
2
You can edit Voice Tags for each phonebook entry by  
choosing Phonebook, Select, Edit Contact.  
Choose a contact using your joystick or side volume  
key, then press Edit, Select, Edit Voice Tags.  
Instructions appear. Press Yes.  
environment. See “Tips” on page 64.  
m
o
C
Before Voice Dialing  
Before you can start voice dialing, you need to turn on the  
voice dialing function and record your voice commands.  
3
4
r
Lift the phone to your ear, wait for the tone and say  
the number type that you want to record. The voice  
command is played back to you.  
Press Yes to save the voice command. If the recording  
is not OK, press No and repeat step 5.  
fo  
t
o
Turning Voice Dialing On  
1
5
Scroll to SettingsN  
, Select, Voice Control, Select,  
VoiceSettings, Select, Voice Dialing, Select,  
You must record a voice tag for each contact you want the  
phone to recognize during voice dial.  
2
Select On and press Select.  
60  
Using Voice Commands  
     
Recording Number Types  
From standby, you can also initiate voice dialing and  
voice control of voice memos by:  
1
2
3
Scroll to Settings, Select, Voice Control, Select,  
VoiceCommand, Select, Voice Dialing, Select.  
Scroll to Home, Work, Mobile, or Other and press  
Select.  
pressing and holding either the upper or lower side  
volume key.  
pressing and holding the joystick.  
pressing and holding the left soeftkey.  
You will be prompted to record the number type.  
Voice Dialing  
s
pressing and holding the handsfree button (when using  
U
saying the Magic Word. See “Magic Word” on  
a portable handsfree or a Bluetooth™ headset).  
Voice Activated Dialing  
l
a
i
1
From standby, press and hold either the upper or lower  
page 63.  
side volume key until you hear a tone.  
c
r
2
Release the upper or lower side volume key, lift the  
phone to your ear and say a name, for example “John”  
after the tone. The name is played back to you.  
e
Voice Answering  
You can answer or reject incoming calls by using your  
m
voice when using a portable handsfree or car handsfree  
accessory.  
m
3
If you have saved several numbers for that contact.  
o
After a second tone, say a number type that you have  
recorded earlier, for example “home”. The number  
C
1
Scroll to Settings, Select, Voice Control, Select,  
VoiceSettings, Select, Voice Answer, Select.  
Check or uncheck the accessories you want to be able  
to use with voice answering by pressing the center  
push key or by pressing the left softkey.  
Press Yes to exit.  
r
type is played back to you, and the call is connected.  
fo  
2
t
Only the number types available for that  
Note!  
o
contact are playNed to you. Fax number types are  
not available for voice dialing.  
3
4
Follow the prompts.  
Using Voice Commands  
61  
   
5
6
Lift the phone to your ear, wait for the tone and say a  
word such as “Answer” and press Yes. If the  
recording was not OK, press the right softkey and  
repeat step 4.  
Say “Busy”, or another word. Press Yes to save your  
recordings.  
2
3
4
Select On and press Select.  
Instructions appear. Press OK.  
Lift the phone to your ear, wait for the tone and say  
“Record”.  
Say “Play” and press Yes to save your recordings.  
5
Starting a Voice Memo Recording  
e
Answering Incoming Calls  
When the phone rings, say “Answer”.  
1
From standby, press and hold either the upper or lower  
s
side volume key until you hear a tone.  
U
2
Release the upper or lower side volume key, lift the  
phone to your ear and say “Record”. The voice  
command is played back to you and a tone indicates  
that the recording has begun.  
l
a
You can use any word to “tell” your phone to  
Note!  
i
pick up an incoming call.  
c
r
e
Rejecting Incoming Calls  
When the phone rings, say “Busy”. The ringer will be  
3
mTo end the recording, press Select.  
muted. Your phone will go through the normal ring cycle Listening to Voice Memo Recordings  
m
o
1
From standby, do one of the following until you hear a  
(although silent) and then the call will go toCvoicemail (if  
enabled).  
tone:  
r
2
Press and hold the left softkey  
Recording Voice Memos  
fo  
Press and hold the joystick  
t
You can record voice comomands (totalling approximately  
Press and hold the upper or lower side volume key  
Press and hold the portable handsfree button  
120 seconds), start a Nvoice memo recording, or listen to  
voice memos.  
Release the key, lift the phone to your ear and say  
“Play”. The voice command is played back to you.  
1
Scroll to Settings, Select, Voice Control, Select,  
VoiceSettings, Select, Voice Memo, Select.  
62  
Using Voice Commands  
 
3
Listen to your last voice memo recording. Press the  
right softkey to stop.  
Using Magic Word can substantially reduce  
standby and talk time.  
Note!  
To play all of your memos, scroll to the Extras  
menu, Select, Voice Memo, Select, and  
choose the voice memo you want to hear from  
the Memo List.  
Note!  
1
2
Scroll to Settings, Select, Voice Control, Select,  
VoiceSettings, Select, Magic Word, Select.  
Select the accessories you want to be able to use with  
the Magic Word by pressing the center push key or by  
e
s
pressing the left softkeUy.  
Magic Word  
3
4
5
6
Press Exit.  
Press Yes to save. l  
You can record a Magic Word that will activate voice  
recognition. You can use it as a voice command to allow  
totally handsfree access to voice control. Instead of  
pressing and holding the upper or lower side volume key,  
you say the Magic Word and then one of your recorded  
voice commands. The Magic Word is especially suitable  
a
i
Follow the prompts.  
c
Lift the phone to your ear, wait for the tone, and say  
r
the Magic Word.  
e
Turn off the Magic Word when you no longer need totally  
handsfree access, in order to save battery power.  
m
m
when driving a car with a car handsfree kit installed,o  
because you use external power instead of the battery  
power of your phone. You can also use the Magic Word  
when the phone is connected to a portable hrandsfree.  
Editing Your Voice Commands  
C
Use the VoiceCommands submenu to keep your voice  
commands up to date by re-recording them or deleting the  
ones you do not use.  
fo  
be distinguished from ordinary background  
t
Choose a long, unusoual word which can easily  
speech (such asN“abracadabra”).  
Note!  
Re-recording Commands  
1
Scroll to Settings, Select, Voice Control, Select,  
VoiceCommand, Select.  
2
Select the type of voice command and press Select.  
Using Voice Commands  
63  
   
3
4
Select a voice command then choose an entry.  
Select Replace Voice and press Select.  
To listen to a recorded voice command, select  
Play Voice.  
Lift the phone to your ear, wait for the tone and say  
the command.  
Shorter tags may cause a lower recognition rate. For  
example, the name “Tom” can easily be confused with  
“Tim”.  
Record your voice using the same tone and inflection  
as you would when normally speaking. Try not to  
overpronounce or speak too slowly when recording.  
5
You can also edit the voice command for a contact name  
in Edit Contact in the Phonebook menu.  
e
When using Portable handsfree devices, you can easily  
s
activate voice dialing by pressing the button near the  
U
microphone until you hear a prompt.  
Tips  
l
a
i
Try to record in an area where there is little or no  
background noise or other people speaking.  
Troubleshooting  
If your phone cannot detect speech, one of the following  
c
r
Try to record your voice with the same equipment that  
you normally use with your phone. For example, if you  
e
might have happened:  
mYou spoke too softly – try speaking more loudly.  
normally have your phone connected to a portable  
handsfree device when using voice commands, remcord  
your voice commands when your phone is attached to  
You held the phone too far away – hold it as you do  
during a call.  
o
C
If you plan to use voice functions handheld mode, hold  
a portable handsfree device.  
r
The voice command was too short – it should be  
around one second long.  
fo  
the phone up to the ear in the position that would  
t
You spoke too late or too soon – speak immediately  
after the tone.  
normally be used on a call.  
o
N
Keep in mind that longer tags provide a higher  
recognition rate.  
Begin speaking after the tone ends.  
You may want to re-record the voice command.  
64  
Using Voice Commands  
 
Inputting Text  
You can enter letters, for example, when you add names  
to the phonebook, write text messages, or enter WAP  
addresses.  
Before you start entering letters, you need to select the  
input languages that you want to use when writing. The  
available input methods are:  
Apart from the way you normally enter letters in your  
phone, using multitap text input, you can use  
T9 Text Input for entering text messages and email, for  
example, if the input language you select supports this.  
T9 Text Input is a predictive input method and is a  
quicker way to write texts.  
Multitap  
e
T9 Text Input  
s
U
Multitap Text Input  
l
When saving names in the phonebook or when writing  
a
i
input. You rpress each key as many times as needed to  
show thee letter you want.  
WAP addresses, you enter letters using multitap text  
c
You can toggle between Multitap and T9 while  
in a text field by pressing then choosing an  
input method.  
Note!  
Inmthe following example, we are going to write a name:  
m
1
2
Scroll to Phonebook, Select, Add Contact, Select.  
Press Select again.  
Press the appropriate key, 1-9, 0, or # repeatedly until  
the character you want appears in the display. See the  
table of the Latin alphabet below: For example:  
To enter an ‘A’, press 2 once.  
o
You will only see text input options if you are in  
Note!  
C
T9 mode. You can get in T9 mode by choosing  
r
Settings, Select, Languagef, Soelect, T9  
o
Predictive, Select, On. t  
N
To enter a ‘B’, quickly press 2 twice.  
To shift between capital and lowercase letters,  
press  
, then enter the letter.  
Inputting Text  
65  
     
T9 Text Input  
You can use T9 Text Input when entering texts such as  
text messages. The T9 Text Input method uses a built-in  
dictionary to recognize the most commonly used word for  
every sequence of key presses. This way, you press each  
key only once, even if the letter you want is not the first  
Press  
for  
1
2
3
4
5
6
7
8
9
0
space. @ ? ! - , & : ’ ¡ ¿ 1  
a b c 2 à á â ã ç  
d e f 3 è é ê ë  
g h i 4 í î ï  
letter on the key.  
When you press the keys, sdifferent words are suggested.  
e
U
If the word you wlant is not suggested, you can edit the  
j k l 5  
word. The word is then added to the dictionary so that it  
a
i
m n o 6 ñ ó ô õ  
p q r s 7  
is suggescted the next time you use T9 Text Input.  
r
In the following example, we will start writing a text  
meessage:  
t u v 8 ù ú û ü  
w x y z 9  
m
1
Scroll to Messages, Select, SMS, Select, Send New,  
Select, scroll to Message Type, Select, enter phone  
number, OK.  
m
o
+ − = ∗ /< > 0  
C
2
For example, if you want to write the word “How”,  
press 4 then 6 then 9.  
to shift between capital and lowercase  
letters  
r
fo  
The word “How” appears.  
# @ & ~ %t$ ^  
o
3
If the word shown is the one you want:  
press 1 to accept and add a space.  
(To accept a word without adding a space, tilt the  
joystick to the right.)  
N
to delete letters and numbers  
C
digit keys  
press and hold to enter numbers  
66  
Inputting Text  
 
If the word shown is not the one you want:  
the text you are writing, scroll to a language and press  
Yes.  
press 0 repeatedly to view alternative words  
(candidates). Accept a word and add a space by  
pressing 1.  
Input Method  
A list of input methods is shown. If you want to change  
the input method for the text you are writing, scroll to  
an input method and press Yes.  
If you do not find the word you want by pressing 0:  
Press , scroll to Edit Word, Yes, write the new word  
using multitap text input, OK.  
e
Edit Word – for T9 Text Input only  
s
Edit the suggested word by using multitap text input.  
U
Accept Word – for T9 Text Input only  
l
Note!  
Press  
to enter a full stop. Accept by  
a
i
Accept the suggested word and add a space.  
1
pressing  
. Press and hold  
to select an  
c
Candidates – for T9 Text Input only  
A list of alternative words is shown. Scroll to a word  
r
input method.  
e
and press Select.  
m
Press * to toggle between capital and lowercase  
letters.  
Note!  
m
Help  
o
Turning Off the T9 Text Input  
Options (available by pressing  
)
C
If you wish, you can turn off the T9 Text Input. This  
setting is valid for all input of texts – not only for the text  
you are currently entering.  
r
Symbols  
Symbols and punctuation marks are shown. Move  
fo  
between the symbols by using the arrow keys. Press  
t
Yes to select a symbol.N  
o
1
Scroll to Settings, Select, Language, Select,  
T9 Predictive, Select.  
Select On or Off.  
Language  
2
A list of the input languages that you selected earlier is  
shown. If you want to change the input language for  
Inputting Text  
67  
 
WAP Browsing  
Your phone has a Wireless Application Protocol (WAP)  
WAP - Wireless Application Protocol. A standard created  
browser which lets you connect to the Internet and access specifically for mobile communications devices that  
specially designed interactive services. WAP is a standard gives you fast and easy internet access from your phone.  
specially created for mobile communications devices and  
WAP Gateway Address - The access number to your  
gives fast access to information and services on the  
network service provider’s WAP gateway. Contact your  
network service provider if this information is not stored  
e
Internet.  
s
U
Examples of WAP services you will be able to find are:  
in your WAP Services settings.  
l
a
Bookmark - iLike any Internet browser, your phone has  
e
Sony Ericsson Mobile Internet  
customer services, user’s guides, and useful  
information when you are traveling  
the capability to store your favorite bookmarks.  
c
r
This feature is operator dependent.  
mNote!  
Reservation services  
m
Homepage - The page your phone will default to when  
News, sports, and weather  
o
you begin browsing. Each profile has its own homepage.  
C
Restaurants, cinemas, games, etc.  
Banking and stock exchange quotes r  
Voicemail, email, and fax mailfo  
o
Profile - Customized settings to simplify browsing. Each  
profile has its own settings such as gateway number,  
homepage, password, and name.  
t
Enter Address - You can input the URL you want to  
visit next.  
Terminology  
N
In this chapter, and in the Browser menu, you will see  
many new terms. Here is a brief description of some of  
the terms that may appear.  
68  
WAP Browsing  
       
Preparing Your Phone for WAP  
Setting up a Data Connection  
Before you can start using the WAP browser, you need to  
make sure that your access settings are set correctly. You  
need to set up your User ID and WAP Gateway address.  
1
2
3
Scroll to Browser, Select, WAP Settings, Select.  
Select a WAP profile, Select.  
Access, Select, WAP Gateway, Select, User ID,  
Select.  
Depending on your network service provider, you can  
receive the access settings you need in different ways.  
4
5
6
7
8
Enter the User ID to your WAP gateway, Select.  
Select Password, Select.  
Enter the password to your WAP gateway, Select.  
e
When you buy your phone together with a WAP  
subscription. Your service provider has already entered  
all the WAP settings you need.  
s
Select IP Address, Select.  
U
Enter the IP address to your WAP gateway, Select.  
l
An IP address lookas something like this: 123.4.67.120.  
Manually. Your service provider will give you the  
settings you need. You can then enter them yourself.  
i
Arn IP address consists of four groups of digits,  
c
Note!  
e
with a maximum of three digits in each group.  
Entering the WAP Settings Manually  
m
If one of your digit groups consists of only one  
The WAP settings you enter will be associated with one m  
of the WAP profiles. If you want to use more than one  
WAP profile, you need to specify the settings for eacoh  
or two digits, you have to enter a zero (0) in  
front of the original digit for each digit that is  
missing. For example, if you were to enter the  
IP number above, 123.4.67.120, you should  
enter 123.004.067.120.  
C
profile. See “Using WAP Profiles” on page r72.  
fo  
Please refer to the information provided by  
Note!  
t
your service provideor before you enter your  
N
You have now entered the settings you need to start  
browsing the internet.  
settings.  
WAP Browsing  
69  
 
.
Opening a WAP Page  
There are three ways to open a WAP page:  
not need to enter this prefix. You only need to  
enter the prefix if it starts with something else,  
for example, ftp://.  
Note!  
by opening a homepage  
by entering the URL or address of the WAP page  
by opening a bookmark that you have saved.  
Changing Homepages  
1
2
3
4
5
Scroll to Browser, Select, Mobile Internet, Select.  
e
Opening a Homepage  
Select the WAP Profile you want to change, Select.  
s
When you buy your phone, the Sony Ericsson Mobile  
Internet is set as your homepage for all WAP profiles. If  
you want, you can choose another WAP page as your  
homepage. See “Changing Homepages” on page 70.  
Chg Homepage, Select.  
U
Enter a name flor this homepage, Select.  
a
i
Enter the address to the WAP page you want to set as  
c
your homepage, Select.  
r
e
1
2
Browser, Select.  
Select the top menu, Select.  
Options While Browsing  
m
While you are browsing, press to reach an Options  
submenu. The menu may look different depending on  
what page you are browsing. It can, for example, contain  
special features of the WAP page you are currently  
browsing.  
The name of this menu depends on what you have chosen  
to call or name it. See “Renaming WAP Profiles” on  
page 73.  
m
o
C
r
Scroll to Browser, Selectt, Enter Address, Select.  
Entering a URL  
1
fo  
It always, however, contains the following options:  
2
Enter the address, for example  
o
Go to Menu. Go back to the Browser menu where you  
can access your bookmarks.  
N
Reload Page. Get the latest version of the WAP page  
you are browsing.  
70  
WAP Browsing  
 
Add Bookmark. Add the page you are currently  
browsing to your list of bookmarks.  
4
Select Add Bookmark, Select.  
Wait until the message Bookmark Saved appears in the  
display.  
New Homepage. Set the current WAP page as your  
homepage.  
Opening Bookmarks While Browsing  
1
Exit WAP. End your browsing.  
When you are browsing, press until the Options  
submenu appears.  
Scroll to Go to Menu, Select, eBookmarks, Select.  
Select the bookmark you wsant, Select.  
Select Go to, Select. U  
Ending your WAP Session  
2
3
4
1
When you are browsing, press until the Options  
submenu appears.  
l
2
3
Select to Exit, Select.  
Data Call in Progress Remain Connected? will  
a
i
Images  
c
If you do not want to display the images on the WAP page  
r
appear.  
that you are browsing, you can turn them off. Images take  
longer to download, but the WAP page may look better  
e
with them.  
4
Press the left softkey to continue the WAP session or  
press the right softkey to exit and return to standby.  
m
m
Bookmarks  
o
If an image contains a link, you can access the link by  
highlighting the image, then pressing Yes.  
If there are some WAP pages that you visit often, you can  
save these as bookmarks, making it easier to go to these  
pages.  
C
r
If you turn off the Image Load function, the images  
appear as icons in the display.  
fo  
t
You can add bookmarks only while you are browsing.  
o
Turning the Image Load Function On or Off  
Adding Bookmarks  
N
1
2
3
4
Scroll to Browser, Select, WAP Settings, Select.  
Select a WAP Profile, Select.  
Common, Select.  
1
2
3
Scroll to Browser, Select, Mobile Internet, Select.  
Go to the WAP page you want to bookmark.  
Press until the Options submenu appears.  
Select On or Off, Select.  
WAP Browsing  
71  
 
Downloading Melodies Using Your  
WAP Browser  
one profile to your service provider’s WAP page and one  
to your company’s intranet. Instead of having to enter the  
access settings, when you want to switch between your  
To download melodies using your WAP browser, navigate service provider’s WAP page and your company’s  
to a WAP site that supports ring melody download using intranet, you can simply switch profiles. It is important to  
the text/x-vmel MIME (internet connect) type. When your remember two things about the WAP profiles:  
phone receives a melody of this type, you will first be  
You can set a different homepage for each WAP  
e
prompted to play the song, and then to save the song into  
one of the My Melodies storage slots on your  
s
profile. When you Uswitch profiles, the homepage  
changes to the homepage set for that profile.  
l
phone.Download Timeout  
A saved bookmark may not work with all WAP  
a
i
profiles. When you save a bookmark, it is associated  
with the WAP profile that you are currently using. If  
you cannot access a bookmark, you may solve the  
problem by switching profiles and then accessing the  
c
This feature is operator dependent  
Note!  
r
e
Some WAP pages can take a long time to download. You  
m
can specify the time that should pass before the download  
bookmark again.  
m
attempt is stopped.  
o
Scroll to Browser, Select, WAP SettingCs, Select.  
Switching WAP Profiles  
1
2
1
r
Scroll to Browser, Select, Select Profile, Select.  
Select a WAP profile, Select.  
2
3
4
Select a WAP profile, Select.  
Access, Select, Response Timer, Select.  
fo  
continue before it stopos. Press Select.  
This WAP profile is active until you switch again.  
Enter how many seconds you want the download to  
t
N
Using WAP Profiles  
Your phone comes with three WAP profiles to help  
simplify your browsing. You can, for example, associate  
72  
WAP Browsing  
   
Renaming WAP Profiles  
A certificate contains, for example, the name of the  
You can change the name of your WAP profiles to a name certificate supplier and a validity period.  
of your own choice.  
Checking the Certificates in Your Phone  
Scroll to Browser, Select, WAP Settings, Select,  
Certificates. Now you can see a list of the available  
1
2
3
4
Scroll to Browser, Select, WAP Settings, Select.  
Select a WAP profile, Select.  
Select Rename, Select.  
certificates.  
Enter a new name, Select.  
e
s
Setting a Secure Connection  
U
Edit the homepage of a WAP profile  
1
2
Scroll to Browser, Select, WAP Settings, Select.  
l
1
2
3
4
5
Scroll to Browser, Select, WAP Settings, Select.  
Select a WAP profile, Select.  
Select Edit Homepage, Select.  
Enter a guiding name for this profile, Select.  
Enter the address to the WAP page you want to set as  
your homepage for this profile and press Select.  
a
Select the profile for which you want the secure  
i
Seleect WAP Security, Select.  
connection.  
c
r
3
Select On, Select.  
m
m
o
Security  
C
When you use certain WAP services, for example  
e-commerce, you need a secure connection between  
your phone and the WAP gateway. To establish secure  
connections, you need to have certificates saved in your  
phone. If you have certificates saved in your phone, you  
trust all WAP gateways that the certificate supplier (for  
r
fo  
t
o
N
example, a network service provider), has certified.  
WAP Browsing  
73  
 
Using the Calendar  
You can use the calendar to keep track of important  
meetings that you need to attend, phone calls that you  
need to make or tasks that you need to do.  
Adding Appointments  
1
Scroll to Extras, Select, Calendar, Select, Add  
Apptmt., Select.  
2
Choose the type of event or appointment and  
For calendar synchronization software, visit  
press OK.  
Press Edit and enter a subject.  
Scroll to Location, press Edit, enter a location, and  
so on.  
Note!  
e
3
4
s
U
Appointments and Tasks  
l
a
You can save many appointments and tasks in your  
calendar. You can choose to add a new appointment or  
task, or use an old appointment or task as a template by  
copying and editing it.  
5
6
Once you have entered the type of appointment and  
i
Prerss Edit and enter a start date. Scroll to Time, press  
location, scroll to Proceed? and press Edit.  
c
e
Select, enter a start time, and so on.  
m
7
8
Scroll to Proceed? and press Edit.  
Select the reminder interval you want, for example  
5 min before, and press OK.  
Appointments: meetings, dates, travel, vacation, m  
Tasks: make a phone call, send a message, pay bills,  
phone calls, etc.  
o
C
Use the # key, press thefupoper or lower side  
You now have the following options:  
etc.  
r
Save and Close - Select to save and exit.  
Note!  
Recurrent App. - Select if the appointment is  
recurrent.  
t
volume key, or tilt the joystick up or down to  
o
toggle am/pm.  
N
You can fill in different types of information about the  
appointments or task.  
Class - Select if you wish to set the appointment as  
public or private.  
74  
Using the Calendar  
           
Adding New Tasks  
View All Tasks. This shows all your entered Tasks.  
Scroll to the task you want to view and press Select.  
1
Scroll to Extras, Select, Calendar, Select, Add Task,  
Select.  
View Month. This shows a whole month, with the  
current day in a square. Move within and among the  
weeks by using the joystick. Press Select to enter a  
2
Choose a task and press OK.  
If you choose phone call, enter a number and press  
OK.  
If you choose message, select a type of message and  
press OK.  
If you choose miscellaneous, select a type and press  
OK.  
certain day. Days on which youehave appointments are  
marked in bold.  
View Week. This shows a wshole week. All your  
U
appointments and Tlasks are shown as grey boxes. You  
enter a certain day by pressing Select when that day is  
a
3
Press Edit and enter a subject. Scroll to Descr., press  
Edit and enter a description.  
i
highlighted.  
c
r
4
5
Scroll to Proceed? and press Edit.  
If you want to set a reminder, scroll to Set reminder  
and press Ok. Enter a reminder date and press Ok.  
e
Editing  
m
You may wish to edit an appointment or a task, for  
example, by changing the date or location.  
m
6
A list of options appears. Confirm with Save And  
o
Close, Select.  
Editing or Deleting Appointments  
1
C
In the calendar, scroll to the day of the appointment  
you want to edit and press Select.  
r
Viewing Your Calendar  
To view your calendar content, scroll to Extras, Select,  
fo  
t
Calendar, Select and then seloect one of the following:  
You can quickly delete the entry by pressing C.  
Note!  
View Today. This shows all the appointments for the  
Delete? appears, press Select.  
N
current day and the Tasks that have not been  
completed. An icon appears next to those  
appointments that cover the whole day.  
2
3
Press  
to Edit, Delete, Reschedule, or Copy.  
Choose Edit and press Select.  
Using the Calendar  
75  
     
4
5
Proceed as described in “Adding Appointments” on  
page 74.  
When you have finished, scroll to Save And Close,  
Select.  
Delete all. Deletes all appointments and Tasks in the  
calendar.  
Reminders. You can choose to be reminded of  
calendar events Always or If Power On.  
Profile Switch. You can change profiles when you are,  
Editing or Deleting Tasks  
1
for example, in a meeting. e  
Scroll to Extras, Select, Calendar, Select, View all  
tasks, Select.  
Choose a task.  
Press to view the list of options. Options include:  
Mark “Done”, Edit, Delete, Copy, and Call.  
When you have finished, scroll to Save And Close,  
Select.  
s
Synchronizing Your Phone and PC  
2
U
to purchase XTNDConnect PC or download a free  
To enhance use oflyour Calendar features, you may want  
a
i
abbreviated version of XTNDConnect PC (does not  
include email capabilities). XTNDConnect PC is a  
software application that allows you to synchronize your  
3
c
r
e
m
contacts, calendar, and tasks between your mobile phone  
and popular PC applications on your computer.  
Calendar Settings  
m
To view your calendar options, scroll to Extras, oSelect,  
Calendar, Select, Options, Select, and theCn select one  
To use your mobile phone with the XTNDConnect PC  
program, you will need the following:  
of the following:  
r
your calendar, how much stpace is left for new  
Status. Use this to check when you last synchronized  
fo  
A functional serial port on your computer  
Microsoft Windows 95/98 SE/Me/NT4/2000  
A serial interface cable (RS232 Cable DRS-11)  
appointments and Tasks.  
o
Class View. You ca  
N
n choose whether to see only the  
Mobile Phone Monitor (a software interface between  
your mobile phone and the XTNDConnect PC  
software)  
private calendar entries, only the public ones, or both.  
76  
Using the Calendar  
   
Purchase XTNDConnect PC (http://  
free version of XTNDConnect PC for Sony Ericsson or  
Ericsson phones only (www.SonyEricsson.com).  
e
s
U
l
a
i
c
r
e
m
m
o
C
r
fo  
t
o
N
Using the Calendar  
77  
Making Data and Fax Calls  
You can use your phone in Wireless Modem Operation  
when it is powered on with a serial interface cable  
attached from your phone to your computer.  
Data Calls  
Data calls are placed to exchange computer files between  
two computers. While the data connection is in place,  
files can be transferred between the connected computers,  
Your mobile phone contains a modem similar to the  
modems you use to connect your computer to your home  
or office telephone service. Rather than connecting to  
standard telephone lines, however, the modem in your  
mobile phone allows you to connect your computer to the  
mobile telephone system. In places where mobile  
network service providers provide the necessary support,  
you can use your mobile phone to send or receive faxes,  
upload or download data files, or access the Internet.  
according to the capabilities oef the software in use. When  
a data call is made, the connection will remain in place  
s
until it is closed by one of the computers involved. To  
U
make or receive data calls with your mobile phone, you  
must have a properly configured communications  
l
a
i
program running on your computer.  
c
Fax Calls  
r
e
m
Fax calls are placed to send fax messages. When a fax  
message has been sent, your fax software or the  
originating fax machine will terminate the call. To make  
or receive fax calls with your mobile phone, you must  
have a properly configured fax program running on your  
computer.  
m
This chapter will assist you with setting up your computer  
o
and phone to handle data, fax, and Internet calls on the  
C
mobile network.  
r
Differences Between Data, Fax, and  
Internet Calls  
fo  
t
o
Your mobile phone cNan handle data, fax, and Internet  
Internet Calls  
calls, but each type of call requires corresponding  
Internet calls are placed to Internet Service Providers  
(ISP) when you want to use email or access websites on  
the World Wide Web. To make Internet calls, you must  
software that must be running on your computer.  
78  
Making Data and Fax Calls  
           
have an account with an ISP and a properly configured  
Internet access program (browser) running on your  
computer. When your software is installed and set up to  
dial your ISP, calls can be made using the normal dialing  
procedure. Once a connection to your ISP is established,  
it will remain in place until you disconnect or until it is  
automatically disconnected due to the degradation of  
signal quality or due to inactivity.  
Verify that you have the necessary subscription.  
The availability of digital mobile voice service  
does not necessarily imply that your mobile  
service provider supports digital data operation.  
Note!  
Setting Up Your Computer  
To operate properly with the modem in your mobile  
phone, make sure that your computer has the following  
e
s
U
Throughout this chapter, references to data/fax/ hardware and software:  
Note!  
l
a
i
internet will be referred to as data.  
A functional serial port  
c
r
An oeperating system that supports data access  
Before You Start  
software, such as Windows 95 or Windows 98  
Before setting up your phone for data operation, do the  
following:  
m  
Appropriate fax (class 2.0), Internet access, or file  
transfer software  
m
You must have a serial interface cable (RS 232 data  
o
cable DRS-11) to connect your mobile phone to your  
C
Class “2.0” is different from Class “2”.  
Note!  
computer. For more information about ordering this  
r
and other accessories, see “Orderinfg Aoccessories” on  
Confirm that your mobile service provider supports  
Initial Setup  
Successful first-time setup of your phone and computer  
for data operation involves the following steps:  
page 84.  
t
o
digital data services inN  
your planned usage area.  
Making Data and Fax Calls  
79  
 
1
Connect your computer to your  
Operation  
phone with your DRS-11 serial  
interface cable. The cable has a plug  
on one end that matches the  
receptacle on the bottom of your  
Making and Receiving Data and Fax Calls  
When your phone and computer are properly set up, you  
can send a fax, or initiate data calls, as with any other  
modem.  
mobile phone. The other end of the  
cable has a 9-pin female connector that matches the  
standard 9-pin serial interface port connector. Connect  
one end of the cable to your mobile phone and the  
other end to the serial port on your computer.  
Review the instructions from your mobile service  
e
making and receivingUdata calls in your area.  
provider that describe the sprocedures and rules for  
l
a
Toiavoid unnecessary airtime charges,  
Note!  
Note! c  
If you are trying to connect to a 25-pin serial  
terminate your data calls, by pressing the No  
key, as soon as you have finished transferring  
files.  
r
interface port on your computer, you will need  
an adapter. You can purchase a 25-pin serial  
interface port adapter at most computer supply m  
e
m
stores.  
Disconnecting  
o
Disconnect your mobile phone from your computer by  
disconnecting the cable from your phone and from the  
serial port on your computer.  
C
2
Install your modem control software (driver).  
r
The modem driver that you need for your mobile  
fo  
t
to this web site for helop with installing drivers for  
Use with Other Sony Ericsson or Ericsson Chargers  
To charge your phone’s battery with a rapid or travel  
charger during data operation, do the following:  
different operating systems.  
N
3
Set up your data access software according to the  
80  
Making Data and Fax Calls  
 
1
2
Plug one end of the serial  
interface cable into your  
phone.  
Plug the other end of the  
serial interface cable into the  
serial port on your computer.  
Plug the charger cable into  
the bottom of the connector.  
Plug the charger cable into the wall outlet.  
phone is in an upright position. If you are indoors, your  
signal will generally be stronger when the phone is near a  
window.  
In a Vehicle  
It is possible to receive data calls when inside your  
vehicle. Operation from a moving vehicle may not be  
3
4
e
satisfactory because data may be lost when your call is  
s
transferred from one mobile base station to another. Be  
U
sure to give full attention to driving and pull off the road  
and park before making or receiving calls, if driving  
l
a
Achieving Best Performance  
i
conditions so require.  
c
r
Charging your Battery  
Both your mobile phone and your laptop computer  
batteries should be well-charged before starting data  
e
Transmission Disturbances  
m
Brief interruptions of mobile telephone signals that would  
m
operation. This will help you avoid interruptions dueoto  
not be bothersome during a voice call may cause  
problems during data operation, depending upon the error  
correction capabilities of the software being used. Such  
interruptions are uncommon during stationary operation,  
but can be caused by vehicles or people passing nearby,  
especially in areas of low signal strength. You can use the  
signal strength indicator on your phone to verify that you  
have a good signal path.  
loss of power.  
C
You can charge your phone’s battery with an Sony  
Ericsson or Ericsson charger during data/fax operation as  
previously described.  
r
fo  
t
o
Signal Strength  
N
It is important to maintain a good signal path between the  
phone and the mobile telephone system when making  
data calls. Signals will generally be stronger when the  
Making Data and Fax Calls  
81  
     
.
Troubleshooting  
If you are using an application that supplies its  
own box for entering extra settings, then type  
the following command string into that box as  
well:  
Note!  
1
You cannot set up or maintain a data/fax session.  
This will occur if you are inadvertently originating a  
voice call when attempting a data/fax call. To correct  
the problem, do the following:  
+COS=4,1,2,0; +ES=1,0,1; +DS=0,0,512,6;  
a From the Start menu on your Windows  
desktop, click on Settings, then Control  
Panel.  
b Double-click the Modems icon.  
c Select the General tab.  
e
s
U
l
a
i
c
d Select Ericsson TDMA 3 volt Data Fax  
Modem from the pull-down list.  
e Click Properties.  
r
e
m
Click General. Make sure that the maximum  
f
m
speed is set to 19200.  
o
C
g Select the Connection tab. r  
h Click Advanced.  
In the Extra settingts bo  
k Click OK Nto return to Modem Properties.  
i
f
x,otype the following:  
&C1  
Click OK to reoturn to the Connection tab.  
j
l
Click Close  
82  
Making Data and Fax Calls  
Troubleshooting  
Recharge or replace the battery.  
Make sure that your serial interface  
cable is connected to both your  
phone and your computer. If the  
problem still exists, consult your  
My phone  
does not  
turn On.  
I cannot  
connect to  
the modem.  
My phone  
Check for Ringer Off ( ) or Silent  
Mode ( ) icons on the standby  
screen.  
computer’s user’s guide.  
e
does not ring  
when a call  
is received.  
s
You may need to configure your  
phone manually to receive a data  
I cannot  
receive a  
data call.  
U
l
a
call.  
i
This is a common occurrence.  
Transmitters are set in geographic  
areas, and coverage is not 100% all  
of the time. Signal strength varies  
as you travel between cells.  
My signal  
strength  
varies.  
c
r
I am having  
e
Make sure that your phone is still in  
Wireless Modem Operation by  
checking your phone’s display. If  
you travel to a region with a weak  
signal, the connection can be  
dropped. If this happens, you will  
need to re-establish a connection to  
the internet once you have enough  
signal strength.  
problems  
m
downloading  
m
information.  
o
Reduce the volume of your sCpeaker  
Speech  
sounds  
garbled or  
distorted.  
r
by pressing the lower side volume  
key until the speech sounds clearer.  
fo  
t
o
N
You are not in an area with strong  
enough service to establish a  
modem connection.  
I do not see  
the WAP  
icon.  
Troubleshooting  
83  
                 
Error Messages  
Battery low  
Your data service is not set up in the  
gateway or the wrong gateway is  
specified in your phone. Do one of  
the following:  
Confirm the correct gateway  
address is entered and active  
Server not  
responding  
The battery power is low. When the  
phone shuts itself off, replace the  
battery with a fully charged one, or  
use an alternate power source, such  
as a travel charger.  
Call to load your data service in the  
e
Your text message memory is full.  
Erase some stored messages before  
you can receive more messages.  
No memory  
Delete  
s
gaUteway.  
Accessoriesa, Accessibility and Internet  
l
i
Technrical Assistance/Customer Service  
Your data service is not active in  
your network or you are out of  
signal strength. Check your  
Network not  
responding  
c
e
mUnited States - 1-800-374-2776  
roaming map or call Technical  
Support to load your data service  
Latin America - +1-305-755-6789  
m
Canada - +1-800-668-2101  
o
into the WAP network. C  
Other countries - +1-919-472-7908  
r
Ordering Accessories  
You can purchase Sony Ericsson branded or Ericsson  
branded accessories intended for use with this product by:  
fo  
t
o
N
Calling 1-800-374-2776 (US only)  
84  
Troubleshooting  
                   
Calling 1-800-755-6789 (Puerto Rico)  
Visiting your local Sony Ericsson or Ericsson retailer.  
Accessible Solutions/Special Needs  
For information on Accessible Solutions for individuals  
with special needs call the Sony Ericsson Special Needs  
Center at 877-878-1996 (TTY) or 877-207-2056 (voice),  
or visit the Ericsson Special Needs Center at:  
e
s
U
l
a
i
Internet  
c
Visit Sony Ericsson on the internet at:  
r
e
m
Mobile Internet  
Visit the Sony Ericsson Mobile Internet at:  
synchronization software, customer services, user’s  
guides, and other useful information. fo  
m
o
C
r
t
o
N
Troubleshooting  
85  
       
Index  
Chat 58  
A
C
Contacts 48  
Customer Service 84  
Accessibility 84  
Accessing Menus 20  
Alarm Clock 38  
Analog Indicator 10  
Appointments 74  
Assistance 84  
Auto  
Calendar  
Adding Appointments 74  
Adding Tasks 75  
Editing 75  
Settings 76  
Using 74  
e
D
s
U
lData/Fax/Internet Calls  
Data Calls 78  
a
i
Disturbances 81  
In Vehicles 81  
c
Viewing 75  
r
Area Code 32  
Keylock 35  
Prefix 32  
Call Info Menu 25  
Call List 25  
e
Initial Setup 79  
Making 80  
Performance 81  
Digital Indicator 10  
m
Call Timers 26  
m
CallingoCards 22  
C
Data 78  
Fax 78  
B
Battery  
Calls  
r
E
fo  
Attaching 14  
First-time Use 17  
t
Earpiece Volume 19  
Error 84  
o
Making 18  
Receiving 18  
Restrict 31  
Browser 68  
N
Charging 14, 17, 18  
86  
Index  
 
Error Message 84  
Low Battery 84  
Mobile Internet 85  
Muting Microphone 19  
My Shortcuts Menu 45  
M
Magic Word 63  
Making  
Network Not Responding 84  
No Memory 84  
No Response 84  
Calling Card Calls 22  
Calls 18  
Data Calls 78  
Fax Calls 78  
O
Ongoing Call Menu 27  
Options Keye11  
s
Server Not Responding 84  
Extras Menu 38  
U
Pl  
Menu  
F
a
i Pause  
Browser 44  
Call Info 25  
Extras 38  
Fax Calls 78  
c
r
Dialing 46  
e
I
Phone Silent 28  
Phone Views 9  
Phonebook  
Messages 24  
m
Icons 10  
My Shortcuts 45  
m
Call List 25  
Standby Screen 10  
Internet 34, 43, 68, 84, 85  
Ongoiong Call 27  
C
Adding Contacts 46  
Calling Contacts 48  
Editing 49  
Menu 21  
Using 46  
rPhonebook 21  
Settings 28  
Internet Calls 78  
fo  
Menus  
t
o
Accessing 20  
Using 20  
K
N
Keys 11, 12, 13  
Pictures 39  
Messages Menu 24  
Missed Calls 25  
Index  
87  
Problem  
Cannot Download 83  
SMS  
T
Chat 58  
Tasks 75  
Cannot Receive Data Call 83  
Low Battery Power 84  
Modem Will Not Connect  
83  
Editing Messages 54  
Message Types 54  
Receiving 56  
Sending 54  
Technical Assistance 84  
Text Input  
Multitap 65  
Options 67  
e
s
No WAP Icon 83  
Speech Sounds Garbled. 83 Softkeys 11  
Varying Signal Strength 83 Sort Order 48  
Will Not Power On 83  
Will Not Ring 83  
Templates 55  
T9 66  
U
lTimer 39  
TTY Phone Number 85  
a
i
c
Sounds 28  
Special Needs 85  
Speed Dialing 48  
r
V
e
Vibrating Alert 28  
Voice  
Profiles 30  
m
Stop  
m
R
o
Answering 61  
Dialing 60, 61  
Memos 62  
Character 46  
Dialing 46  
C
Receiving Calls 18  
r
Restrict Calls 31  
Super Speed Dialing 48  
Synchronizing  
Calendar 76  
fo  
Voice Memo 38  
t
S
Settings Menu 28 N  
o
Phonebook 51  
88  
Index  
W
WAP  
Ending Your Session 71  
Settings 69  
Web site 43  
e
s
U
l
a
i
c
r
e
m
m
o
C
r
fo  
t
o
N
Index  
89  
e
s
U
l
a
i
c
r
e
m
m
o
C
r
fo  
t
o
N
e
s
U
l
a
i
c
r
e
m
m
o
C
r
fo  
t
o
N
e
s
U
l
a
i
c
r
e
m
m
o
C
r
fo  
t
o
N
T61d/ds Quick Card  
No service is available.  
You have a new message. The  
number next to the envelope  
indicates how many messages  
you have.  
Your phone is in Analog mode.  
Your phone is in Digital mode.  
Magic Word is active.  
You have missed a call.  
Meeting profile is active.  
Car profile is active.  
Indicates an incoming call in  
Call list.  
e
s
Indicates an outgoing call in  
Call list.  
Auto Keylock is active. Unloack  
U
Home profile is active.  
l
i
followed by  
Work profile is active.  
cC  
by pressing  
and the left softkey.  
r
e
Outdoors profile is active.  
Portable profile is active.  
Ringer is off. Turn On by  
.m  
Call screening is activated.  
pressing  
m
Silent mode is On.  
o
Shows current battery status.  
C
r
Shows current signal strength. fo  
Alarm is set.  
t
o
N
Emergency Calls  
Enter your local emergency number  
and press the left softkey.  
Turn Phone On/Off  
Press and hold the power key.  
Call Number Shown in Display  
Enter the Menus  
Press the left softkey.  
Tilt the joystick left or right or press  
Menu.  
Change Ear Volume (During Call)  
Press upper or lower side key  
Select a Menu or Save a Setting  
e
Microphone Mute (During Call)  
Press left softkey.  
s
Press and hold C.  
U
Cancel Action or Move Back in Menus  
Auto Keylock  
l
Press right softkey.  
Press and hold , then select Lock  
a
Keypad or Unlock Keypaid.  
r
Speed Dial  
c
Enter position number (2-9) and press Call.  
Silent Mode  
Press , select Turn on Silent.  
e
Redial Last Dialed Number  
m
Press left softkey from standby  
Website  
m
C
Technical Support  
Answer Call  
o
Press the left softkey.  
End Call  
r
North America - 1-800-374-2776  
Press the right softkey.  
Call Voicemail  
Press and hold 1.  
Latin America - 1-305-755-6789  
Canada - 1-800-668-2101  
Other Countries - +1-919-472-7908  
fo  
t
o
N
You can quickly access several commonly used menus by tilting the joystick left or right. The menus are organized in a circle.  
Quickly access menus and settings using the numbers that appear next to each menu and setting. For example, access your  
Calendar by pressing left or right then 3 to access the Call Info menu. Then press 2 to access the Call list submenu.  
e
U
l
a
i
c
1.Call Contact 1.Call  
1.Missed Calls  
2.Call List  
3.Usage Tracker 3.Call Options  
1.Sounds & Alerts 1.Voice Memo 1.Homepage  
Edit shortcuts  
r
Voicemail  
e
2.Add Contact  
3.Edit Contact  
4.My Numbers  
5.Groups  
2.Profiles  
2.Calendar  
3.Time  
2. Resume  
2.SMS  
3.Options  
3. Select Profile  
4. Clear Cache  
5. WAP Settings  
m
4.Options  
4.Display  
4.Games  
m
5.Language  
C
5.Calculator  
6.Time and Date 6.Code Memo  
o
1.Turn off  
Tones *  
6.Calling Cards  
7.Options  
8.Memory  
Status  
7.Locks  
7.Headset Jack  
8. Accessories  
r
3.Swfitcoh calls *  
2.Hold call *  
8.Voice Control  
9.Networks  
0.Reset settings  
Data Comm.  
t
4.Release active *  
5.Retrieve Call *  
o
N
* Depending on whether a call is  
ongoing or not, either the Call  
Note: WAP Browser menu items are  
dependent upon your service provider.  
info or the Ongoing call menu is  
shown.  
www.S onyEricsson.com  
AE /LZT 123 7191 R 1  

Yamaha CDX 9 User Manual
Uniden MHS 350 User Manual
Toastmaster MERB10B User Manual
Sony Ericsson T302 User Manual
Seagate Backup Plus STBU500100 User Manual
Samsung SPINPOINT MP2 HM121HJ User Manual
RCA RC10 User Manual (1)
Philips Senseo II Blue US User Manual
Palm 600 User Manual
Nokia 6303I CLASSIC User Manual