Sony ICF CD523 User Manual

2-667-168-21 (1)  
Owner’s Record  
Precautions  
IMPORTANT SAFEGUARDS  
For your protection, please read these safety instructions completely before operating the appliance,  
and keep this manual for future reference.  
Carefully observe all warnings, precautions and instructions on the appliance and in the operating  
instructions, and adhere to them.  
The model number and the serial number are located  
on the top.  
Operate the unit on the power source specified in  
the “Specifications.”  
Record the serial number in the space provided below.  
Refer to them whenever you call upon your Sony  
dealer regarding this product.  
To disconnect the power cord (mains lead), pull it  
out by the plug, not the cord.  
Do not leave the unit in a location near a heat  
source such as a radiator or airduct, or in a place  
subject to direct sunlight, excessive dust,  
mechanical vibration, or shock.  
INSTALLATION  
Model No. ICF-CD523  
Serial No.  
Water and Moisture  
Do not use powerline operated appliances near water - for example, near a bathtub, washbowl,  
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.  
Allow adequate air circulation to prevent internal  
heat build-up. Do not place the unit on a surface (a  
rug, a blanket, etc.) or near materials (a curtain)  
which might block the ventilation holes.  
Should any solid object or liquid fall into the unit,  
unplug the unit and have it checked by a qualified  
personnel before operating it any further.  
To clean the casing, use a soft cloth dampened  
with a mild detergent solution.  
Heat  
Do not place the appliance near or over a radiator or heat register, or where it is exposed to direct  
sunlight.  
WARNING  
FM/AM CD Kitchen  
Clock Radio  
Ventilation  
The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable  
operation of the appliance, and to protect it from overheating, these slots and openings must never be  
blocked or covered.  
To reduce the risk of fire or  
electric shock, do not expose  
this apparatus to rain or  
moisture.  
-Never cover the slots and openings with a cloth or other materials.  
-Never block the slots and openings by placing the appliance on a bed, sofa, rug or other similar  
surface.  
If you have any questions or problems  
concerning your unit, please consult your  
nearest Sony dealer.  
-Never place the appliance in a confined space, such as a bookcase, or built-in cabinet, unless proper  
ventilation is provided.  
Accessories  
Do not place the appliance on an unstable cart, stand, tripod, bracket, or table. The appliance may fall,  
causing serious injury to a child or an adult, and serious damage to the appliance. Use only a cart,  
stand, tripod, bracket, or table recommended by Sony.  
-An appliance and cart combination should be moved with care. Quick stops, excessive force, and  
uneven surfaces may cause the appliance and cart combination to overturn.  
Operating Instructions  
Troubleshooting  
Should any problem persist after you have made the  
following checks, consult your nearest Sony dealer.  
Wall or Ceiling Mounting  
The clock does not show the correct time.  
If your appliance can be mounted to a wall or ceiling, mount it only as recommended by Sony.  
Has an electrical power outage lasting more than  
one minute occurred?  
USE  
The CD player does not operate.  
Power Source  
Did you close the disc tray?  
This appliance should be operated only from the type of power source indicated on the marking label.  
If you are not sure of the type of electrical power supplied to your home, consult your dealer or local  
power company. For those appliances designed to operate from battery power, or other sources, refer  
to the operating instructions.  
Did you place the disc correctly?  
The disc should be placed with the labeled side up.  
Dusty or defective disc—Clean the disc with an  
optional cleaning cloth. Wipe the disc from the  
center out.  
Take out the CD and leave the CD compartment  
open for about an hour to get rid of moisture  
condensation.  
This symbol is intended to alert the user to  
the presence of uninsulated “dangerous  
voltage” within the product’s enclosure that  
may be of sufficient magnitude to constitute  
a risk of electric shock to persons.  
Grounding or Polarization  
This appliance is equipped with a polarized AC power cord plug (a plug having one blade wider than  
the other), or with a three-wire grounding type plug (a plug having a third pin for grounding). Follow  
the instructions below:  
-For the appliance with a polarized AC power cord plug:  
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to  
insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact  
your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized  
plug by forcing it in.  
-For the appliance with a three-wire grounding type AC plug:  
This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to  
insert the plug into the outlet, contact your electrician to have a suitable outlet installed. Do not defeat  
the safety purpose of the grounding plug.  
Sporadic loss of sound in CD operation.  
This symbol is intended to alert the user to  
the presence of important operating and  
maintenance (servicing) instructions in the  
literature accompanying the appliance.  
Dusty or defective disc—Clean or replace the disc.  
Volume too high—Reduce the volume.  
Strong vibration.  
For customers who purchased this product in the USA  
Please register this product on line at  
Proper registration will enable us to send you periodic mailings about new products,  
services, and other important announcements. Registering your product will also allow  
us to contact you in the unlikely event that the product needs adjustment or modification.  
Thank you.  
The graphical symbols are on the top of the  
enclosure.  
Specifications  
AUDIO POWER  
INFORMATION  
Overloading  
This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful  
interference in a residential installation. This  
equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there  
is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause  
harmful interference to radio or television reception,  
which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the  
interference by one or more of the following  
measures:  
Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since  
this can result in fire or electric shock.  
SPECIFICATIONS  
When not in use  
Unplug the power cord of the appliance from the outlet when left unused for a long period of time.  
To disconnect the cord, pull it out by grasping the plug. Never pull the plug out by the cord.  
POWER OUTPUT AND TOTAL HARMONIC  
DISTORTION  
Power-Cord Protection  
With 4-ohm loads, both channels driven from  
150-6 000 Hz; rated 1.2 W per channelminimum RMS  
power, with no more than 10% total harmonic  
distortion in AC operation.  
Route the power cord so that it is not likely to be walked on or pinched by items placed upon or  
against them, paying particular attention to the plugs, receptacles, and the point where the cord exits  
from the appliance.  
ICF-CD523  
2006 Sony Corporation  
Printed in China  
Lightning  
For added protection for this appliance during a lightning storm, or when it is left unattended and  
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable  
system. This will prevent damage to the appliance due to lightning and powerline surges.  
CD player section  
System: Compact disc digital audio system  
Laser diode properties:  
Object and Liquid Entry  
Never push objects of any kind into the appliance through openings as they may touch dangerous  
voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any  
kind on the appliance.  
Emission duration: Continuous  
Laser output: Less than 44.6 µW  
—Reorient or relocate the receiving antenna.  
—Increase the separation between the equipment  
and receiver.  
—Connect the equipment into an outlet on a circuit  
different from that to which the receiver is  
connected.  
(This output is the value measured at a distance of  
about 200 mm from the objective lens surface on  
the optical pick-up block with 7 mm aperture.)  
Cleaning  
Unplug the appliance from the wall outlet before cleaning or polishing it. Do not use liquid cleaners  
or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the appliance.  
Clean the appliance only as recommended by Sony.  
Frequency response: 20-20 000 Hz +12 dB  
-
—Consult the dealer or an experienced radio/ TV  
technician for help.  
Attachments  
Wow and flutter: Below measurable limit  
Do not use attachments not recommended by Sony, as they may cause hazards.  
ANTENNAS  
You are cautioned that any changes or  
modifications not expressly approved in this  
manual could void your authority to operate this  
equipment.  
Radio section  
Frequency range:  
FM: 87.5-108 MHz  
AM: 530-1 710 kHz  
Outdoor Antenna Grounding  
If an outdoor antenna or cable system is installed, follow the precautions below.  
An outdoor antenna system should not be located in the vicinity of overhead power lines or other  
electric light or power circuits, or where it can come in contact with such power lines or circuits.  
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN  
TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM  
IS ALMOST INVARIABLY FATAL.  
Be sure the antenna system is grounded so as to provide some protection against voltage surges and  
built-up static charges. Section 810 of the National Electrical Code provides information with respect  
to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an  
antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection  
to grounding electrodes, and requirements for the grounding electrode.  
CAUTION  
The use of optical instruments with this  
product will increase eye hazard.  
General  
Time display:  
12-hour system  
Speaker:  
Features  
66 mm (2 58 inches) dia, 4 Ω  
Built-in CD player with Shuffle/Repeat function.  
PLL (Phase Locked Loop) Synthesized Tuner with  
15 memory presets for easy one button tuning.  
Powerful bass with MEGABASS sound system.  
Single alarm function - which can be used as timer.  
Summer time (daylight saving time) calculation.  
Power outputs:  
Antenna Grounding According to the National  
Electrical Code  
1.2 W + 1.2 W (at 10 % harmonic distortion)  
Power requirements:  
120 V AC, 60 Hz  
Dimensions:  
Antenna Lead-in Wire  
Approx. 365 × 106 × 281 mm (w/h/d)  
(Approx. 14 38 × 4 14 × 11 18 inches)  
incl. projecting parts and controls  
Ground  
Clamps  
Antenna Discharge Unit  
(NEC Section 810-20)  
Mass:  
Grounding Conductors  
Electric Service  
Equipment  
(NEC Section 810-20)  
Approx. 3.0 kg (6 lb 9 oz)  
NEC-NATIONAL  
Ground Clamps  
Supplied accessories:  
ELECTRICAL CODE  
Mounting screws (4), Template (1),  
Spacers (4), Cord clamp (1)  
Power Service Grounding Electrode System  
(NEC Art 250 Part H)  
SERVICE  
Damage Requiring Service  
Unplug the appliance from the wall outlet and refer servicing to qualified service personnel under the  
following conditions:  
Design and specifications are subject to change  
without notice.  
-When the power cord or plug is damage or frayed.  
-If liquid has been spilled or objects have fallen into the appliance.  
-If the appliance has been exposed to rain or water.  
-The appliance does not appear to operate normally or exhibits a marked change in performance.  
-This indicates a need for service.  
-If the appliance does not operate normally when following the operating instructions, adjust only  
those controls that are specified in the operating instructions. Improper adjustment of other controls  
may result in damage and will often require extensive work  
by a qualified technician to restore the appliance to normal operation.  
-If the appliance has been subject to excessive shock by being dropped, or the cabinet has been  
damaged.  
Servicing  
Do not attempt to service the appliance yourself as opening or removing covers may expose you to  
dangerous voltage or other hazards.  
Refer all servicing to qualified service personnel.  
Replacement parts  
When replacement parts are required, be sure the service technician has used replacement parts  
specified by Sony that have the same characteristics as the original parts.  
Unauthorized substitutions may result in fire, electric shock, or other hazards.  
Safety Check  
Upon completion of any service or repairs to the appliance, ask the service technician to perform  
routine safety checks (as specified by Sony) to determine that the appliance is in safe operating  
condition.  

Toastmaster ME12DSBCAN User Manual
Telular 1900 User Manual
Slick CR312 User Manual
Samsung IP 830w User Manual
Samsung GH68_3XXXXA User Manual
Roland Computer Drive M UF2G User Manual
Roberts Radio ecologic 6 User Manual
Pantech C150 User Manual
Palm T5 User Manual
Nokia MOBILE PHONE NOKIA 3100 User Manual